Format SDcard to ext4 - Samsung Galaxy S (4G Model)

Could someone hel me with this. Ive searched and cant seem to find it all i can find is internal sd.

BAleR said:
Could someone hel me with this. Ive searched and cant seem to find it all i can find is internal sd.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1204682&highlight=ext+4

This is for the micro sd card?

BAleR said:
This is for the micro sd card?
Click to expand...
Click to collapse
Are you trying to use use the link2sd app?

lumin30 said:
Are you trying to use use the link2sd app?
Click to expand...
Click to collapse
no, ive been trying to flash valhalla black ed. and its been acting weird, i noticed when i wipe delvik cash it says E: no volume path (sd ext) or something similar, so i thought maybe it was because i got a new sd card and its not partitioned either

BAleR said:
no, ive been trying to flash valhalla black ed. and its been acting weird, i noticed when i wipe delvik cash it says E: no volume path (sd ext) or something similar, so i thought maybe it was because i got a new sd card and its not partitioned either
Click to expand...
Click to collapse
I don't think you need to worry about the E:unknown volume for path [sd-ext]. There are actually a bunch of threads regarding it. As far as your ROM acting funny -- try the standard:
Wipe Cache Partition
Wipe (yes it is wiped even with the error)
Fix Permissions
Reboot and let phone sit 10 mins to rebuild caches.
If that doesn't work....
Factory wipe and reflash ROM.

Well ive tryed all that and more, the last rom didnt have any of these problems. Now i noticed the phone getting hot so i installed setcpu, and the cpu isnt scaling, it just sits at 1000mhz , if i set max at 200mhz the phone cools off and charges much faster. I think its a kernel issue, why it is happening to some and not others i dont know. Do you know of any good kernels i could try? One that O/C's?

BAleR said:
Well ive tryed all that and more, the last rom didnt have any of these problems. Now i noticed the phone getting hot so i installed setcpu, and the cpu isnt scaling, it just sits at 1000mhz , if i set max at 200mhz the phone cools off and charges much faster. I think its a kernel issue, why it is happening to some and not others i dont know. Do you know of any good kernels i could try? One that O/C's?
Click to expand...
Click to collapse
What ROM are you on? If you are on Valhalla Black - people are OCing with that. Sometimes you need to start fresh man. Flash to complete KJ6 stock, factory reset, wipe all caches and start over. Sometimes even reflash stock twice to make sure you get all the gremlins off the phone.
I am on Valhalla Black - rc3.1 - and I have not had a SINGLE issue. A lot of people haven't had any issues. But I flashed from stock... hmmmm.
Maybe try it. Otherwise I defer to somebody else to help you. Consider hitting thanks!
BTW I get the same error when wiping dalvik. But it still wipes it and no big deal.

lumin30 said:
What ROM are you on? If you are on Valhalla Black - people are OCing with that. Sometimes you need to start fresh man. Flash to complete KJ6 stock, factory reset, wipe all caches and start over. Sometimes even reflash stock twice to make sure you get all the gremlins off the phone.
I am on Valhalla Black - rc3.1 - and I have not had a SINGLE issue. A lot of people haven't had any issues. But I flashed from stock... hmmmm.
Maybe try it. Otherwise I defer to somebody else to help you. Consider hitting thanks!
BTW I get the same error when wiping dalvik. But it still wipes it and no big deal.
Click to expand...
Click to collapse
Yes im on that rom
So just flash the stock kj6 rooted rom and then VB? Ill try that but if that dont work then i dunno cus i dont have a computer, thanks for tryin though, you still helped

BAleR said:
Yes im on that rom
So just flash the stock kj6 rooted rom and then VB? Ill try that but if that dont work then i dunno cus i dont have a computer, thanks for tryin though, you still helped
Click to expand...
Click to collapse
Flash it twice... no computer??

Nope. Not one at home
So you overclocked with the kernel in VB?

BAleR said:
So you overclocked with the kernel in VB?
Click to expand...
Click to collapse
Not me... I don't feel like I need it. The ROM is flawless as far as I am concerned. But I have read posts from others saying they have overclocked.
thomas.raines - "I'm using Lightning Zap with no issues. Brought the quad scrores (although not very meaningful) from 2100+ to 2600+ NOT Oc'd, improved FPS, and OC'd I finally hit a 3000+..."

If you want to overclock just use tegrak paid. I have OC'd on this and it works fine. No heat issues other than what you would expect.

Hmm.. downloaded the app and says 1ghz is the highest i can go

you need paid version, legit from market
Sent from my Acer Iconia A500 using Tapatalk

Somairotevoli said:
you need paid version, legit from market
Sent from my Acer Iconia A500 using Tapatalk
Click to expand...
Click to collapse
No. Its not that. It does the same thing with setcpu

Ok, i wiped everything and reflashed. Let it sit. I checked to see if the phone was idleing, it was i rebooted, and after every step i checked if it was idleing and once i signed into google and opened the market, phone idle under battery usage went away and now its not idleing. Dunno what this means but im just going back to the last build till this is figured out, thanks for all the help though.
Sent from my SGH-T959V using xda premium

Yeah, its the market. All is well untilled I open the market.

Did you load the overclock module?

hechoen said:
Did you load the overclock module?
Click to expand...
Click to collapse
Yup i did..........

Related

[Q] Running Slow....

I have had Hienz 57 running for about a month now and it seems to be running really slow. Even while doing the smallest things like typing it will be a couple letters behind. Anyone have any ideas. I have cleaned all the app caches and deleted what I don't use any more but still slow.
1fast72 said:
I have had Hienz 57 running for about a month now and it seems to be running really slow. Even while doing the smallest things like typing it will be a couple letters behind. Anyone have any ideas. I have cleaned all the app caches and deleted what I don't use any more but still slow.
Click to expand...
Click to collapse
Rebooting usually fixes this for me
Sent from my SCH-I500 using XDA App
That sometimes works but I was kinda looking for a more permenent solution. Would wiping the cache or dalvik possibly help?
1fast72 said:
That sometimes works but I was kinda looking for a more permenent solution. Would wiping the cache or dalvik possibly help?
Click to expand...
Click to collapse
you got voodoo enabled. what are your settings like...maybe you just need to re-odin then reflash the ROM and stuff...sometimes phones just need a fresh start
^Agreed. I can't count the times if done that. Mostly after I have went through five or so kernels but none the less it can't hurt and I haven't done it yet and regretted it.
Tap-a-Talked
There's a formatting utility here:
http://forum.xda-developers.com/showthread.php?t=1090127
I used the ext4 (voodoo) version and it worked great. I know they mean nothing, but I was getting 1500-1600 Quadrant scores before I ran it (still with voodoo), and I'm getting 1700-1800 now.
Sent from my Kangbanged Mesmerize
edit: This does wipe everything, so run your backups beforehand if you decide to try it.
That's the one I used today and it is freakin sweet. An excellant tool.
Tap-a-Talked
Yes I have voodoo enabled. I have not changed any voltage settings yet. When you say to re-odin are you saying to flash back to stock ec10 and then reflash the hienz 57? Still learning the terminology. I did go from the voodoo kernel to hienz without a fresh start. I also didn't wipe the data but for the first few weeks it ran awesome. I have also had a few half reboots. Like it would go to the android logo but not all the way to the samsung logo
defenestrado said:
There's a formatting utility here:
http://forum.xda-developers.com/showthread.php?t=1090127
I used the ext4 (voodoo) version and it worked great. I know they mean nothing, but I was getting 1500-1600 Quadrant scores before I ran it (still with voodoo), and I'm getting 1700-1800 now.
Sent from my Kangbanged Mesmerize
edit: This does wipe everything, so run your backups beforehand if you decide to try it.
Click to expand...
Click to collapse
+1 works great
Thinking of trying this but did you have the cwm 3 or just the 2.5.x? Also can I just flash the H57 zip and be back up and working?
Ran the utility and worked great. Have more memory too so the tons have been staying behind a little. Phone is much smoother and faster.
Sent from my SCH-I500 using XDA App
Normally i have zero issues with lag, however as of late I've had some slight issues with lag as well, even with lagfix enabled - to remedy it I simply enabled the 1120 overclock step and it's been fast ever since (and not too bad on the battery)
I just happened to be browsing the Sd card since I just dl the newest H57 and noticed that after formatting I dont have the android secure folder. Is this a problem or will it create a new one?
Sent from my SCH-I500 using XDA App

[Q] Question and yes I've searched...

I wiped my Inspire using Full Wipe 1.5 but I noticed after I flashed a new ROM that half my memory is gone. It comes with 2 gigs on board but after the flash and install it was at 800 MB...I didnt even use a third of that before I flashed it. I was only sitting at 1.7 gigs with all the same apps.
My question is will going into Clockwork and clearing the cache partition absolutely erase all the app data, user data, etc. and bring me back up to 2 gigs? While keeping the ROM and everything else intact obviously. Im going to assume that it does so, sorry for question 2 I know you should do this before flashing a new ROM but is there any danger to doing it while you're already up and running? Other than having to reinstall all your apps, etc.?
Thanks guys I really appreciate the help.
Matt James said:
I wiped my Inspire using Full Wipe 1.5 but I noticed after I flashed a new ROM that half my memory is gone. It comes with 2 gigs on board but after the flash and install it was at 800 MB...I didnt even use a third of that before I flashed it. I was only sitting at 1.7 gigs with all the same apps.
My question is will going into Clockwork and clearing the cache partition absolutely erase all the app data, user data, etc. and bring me back up to 2 gigs? While keeping the ROM and everything else intact obviously. Im going to assume that it does so, sorry for question 2 I know you should do this before flashing a new ROM but is there any danger to doing it while you're already up and running? Other than having to reinstall all your apps, etc.?
Thanks guys I really appreciate the help.
Click to expand...
Click to collapse
Maybe the ROM you installed takes up more ROM, some roms take up less than others. Like how an AOSP roms take less rom than Sense.
Hmm I wouldnt think so since its the stock ATT rom. Just bloatware removed, new OC Kernal, etc. I cant believe it would take up almost twice as much more space. I could be wrong though?
Matt James said:
Hmm I wouldnt think so since its the stock ATT rom. Just bloatware removed, new OC Kernal, etc. I cant believe it would take up almost twice as much more space. I could be wrong though?
Click to expand...
Click to collapse
I would guess that perhaps the stock ROM has an issue displaying the correct amount of RAM. this is pretty common in retail ROMs.
The custom ROM you were using may have had a hack patched in to display the correct amount, or may have been RAM optimised.
If it's internal storage space you're talking about though, it's not uncommon for OEMs to 'reserve' a block of space for 'system use'.
juzz86 said:
I would guess that perhaps the stock ROM has an issue displaying the correct amount of RAM. this is pretty common in retail ROMs.
The custom ROM you were using may have had a hack patched in to display the correct amount, or may have been RAM optimised.
If it's internal storage space you're talking about though, it's not uncommon for OEMs to 'reserve' a block of space for 'system use'.
Click to expand...
Click to collapse
That would be insane if that was the case. The stock rom out of the box show 1.7 gigs free after all my apps were install. I do a wipe, flash a cooked version of the stock rom and now Im down to 900 MB left? I just dont get it.
Yes Im talking about internal storage. I just wanna know where a whole gig went though this is supposed to be the ATT rom just tweeked.
So you guys dont think clearing the partition cache would clear it up and make a difference? If it reads 800 MB its gonna be 800 MB even after a fresh clear or factory reset?
Matt James said:
That would be insane if that was the case. The stock rom out of the box show 1.7 gigs free after all my apps were install. I do a wipe, flash a cooked version of the stock rom and now Im down to 900 MB left? I just dont get it.
Yes Im talking about internal storage. I just wanna know where a whole gig went though this is supposed to be the ATT rom just tweeked.
So you guys dont think clearing the partition cache would clear it up and make a difference? If it reads 800 MB its gonna be 800 MB even after a fresh clear or factory reset?
Click to expand...
Click to collapse
That's a bit clearer I got a little confused there, sorry.
Wiping the cache wouldn't be a bad idea. The other possibility is that the ROM has set up some sort of EXT3 or 4 partition in your data space for caching and 'speed'. I've seen this done before, although usually on the external SD.
I'd wipe cache and see how you go
juzz86 said:
That's a bit clearer I got a little confused there, sorry.
Wiping the cache wouldn't be a bad idea. The other possibility is that the ROM has set up some sort of EXT3 or 4 partition in your data space for caching and 'speed'. I've seen this done before, although usually on the external SD.
I'd wipe cache and see how you go
Click to expand...
Click to collapse
Sorry I should've been a bit more clear in the op. I'll do that and let you guys know how it goes. Be back in a few mins
Alright Im back and it didnt do a thing. Maybe a factory reset/wipe in Clockwork? That wouldnt get rid of root or ROM would it? Just erase EVERYTHING else?
Matt James said:
Alright Im back and it didnt do a thing. Maybe a factory reset/wipe in Clockwork? That wouldnt get rid of root or ROM would it? Just erase EVERYTHING else?
Click to expand...
Click to collapse
Matt, can you tell me what phone you're using and point me to the ROM you installed mate?
juzz86 said:
Matt, can you tell me what phone you're using and point me to the ROM you installed mate?
Click to expand...
Click to collapse
Yes. Im using an HTC Inspire 4g and the ROM is called the TPC Inspire 4G Stock ROM optimized. Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=982963
Im thinking about maybe doing a factory reset from inside the phone, not Clockwork, to see if that gives me back the 2 gigs. If it doesnt work and Im stuck at 900 mb again after the reset Im gonna be completely stumped.
Matt James said:
Yes. Im using an HTC Inspire 4g and the ROM is called the TPC Inspire 4G Stock ROM optimized. Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=982963
Click to expand...
Click to collapse
I believe it's worth PMing twopumpchump about this one, I couldn't find any mention of this issue, although I noticed the dalvik heap size has been changed and quite a few APKs have been moved around between partitions, although I doubt it would be 800MB worth.
My suggestion would be to try a factory reset first, then maybe contact twopump. Kudos to you for trying first Many wouldn't.
juzz86 said:
I believe it's worth PMing twopumpchump about this one, I couldn't find any mention of this issue, although I noticed the dalvik heap size has been changed and quite a few APKs have been moved around between partitions, although I doubt it would be 800MB worth.
My suggestion would be to try a factory reset first, then maybe contact twopump. Kudos to you for trying first Many wouldn't.
Click to expand...
Click to collapse
Thanks dude I appreciate it The factory reset wont erase Clockwork or root will it? Just all the apps/data on the phone?
Matt James said:
Thanks dude I appreciate it The factory reset wont erase Clockwork or root will it? Just all the apps/data on the phone?
Click to expand...
Click to collapse
You're welcome mate. Factory reset won't lose you CWM or root, you will lose all user data, apps etc. though.
Good luck with it mate!
juzz86 said:
You're welcome mate. Factory reset won't lose you CWM or root, you will lose all user data, apps etc. though.
Good luck with it mate!
Click to expand...
Click to collapse
Didnt work...just took me to just under a gig. I just sent a message to TwoPump so we'll see what happens. I dont know why Im being so picky I mean I didnt even use half a gig even with all my apps installed and everything but I just wanna know what happend to the other gig
Oh well, cant win em all I guess.
Matt James said:
Didnt work...just took me to just under a gig. I just sent a message to TwoPump so we'll see what happens. I dont know why Im being so picky I mean I didnt even use half a gig even with all my apps installed and everything but I just wanna know what happend to the other gig
Oh well, cant win em all I guess.
Click to expand...
Click to collapse
Not sure if this will help, or if you've done it already, but go into advanced in CWM and wipe your Dalvik cache also. See if that makes any difference.
Thread moved
Yes you searched everything but questions and Answers section
Matt James said:
I wiped my Inspire using Full Wipe 1.5 but I noticed after I flashed a new ROM that half my memory is gone. It comes with 2 gigs on board but after the flash and install it was at 800 MB...I didnt even use a third of that before I flashed it. I was only sitting at 1.7 gigs with all the same apps.
My question is will going into Clockwork and clearing the cache partition absolutely erase all the app data, user data, etc. and bring me back up to 2 gigs? While keeping the ROM and everything else intact obviously. Im going to assume that it does so, sorry for question 2 I know you should do this before flashing a new ROM but is there any danger to doing it while you're already up and running? Other than having to reinstall all your apps, etc.?
Thanks guys I really appreciate the help.
Click to expand...
Click to collapse
juzz86 said:
Not sure if this will help, or if you've done it already, but go into advanced in CWM and wipe your Dalvik cache also. See if that makes any difference.
Click to expand...
Click to collapse
Done that and didnt work I'm just gonna have and see what TP has to say.
I did a bit more of a search for you last night, reckon it might be to do with the sizes of your /system and /data partitions. I can't help you with that one bud, sorry see how you get on with TPC.
Sent from my Motorola Atrix using XDA Premium App

Fixing sd ext problem

Whenever i go into cwm, it displays "sd ext not found. But voodoo is enabled and says ext on. I got this problem after i had to format my sd card. I believe this error has to do with my responsiveness of my phone as well. Even with aldrenaline shot my games lag noticably. How can i fix this error. Should i format my sd and delete all the partitions?
Sent from my SGH-T959V using xda premium
are you using link2sd or a similar app to keep apps on the other partition?
jager555 said:
are you using link2sd or a similar app to keep apps on the other partition?
Click to expand...
Click to collapse
I am using no app to do that.
Sent from my SGH-T959V using xda premium
In another thread dsexton said that error had to do with the kernel, i've had the issue since froyo with no noticeable problems, I also tried all that I could to fix it (formatting sd getting rid of link2sd re-partitioning) all in vain.
So if you find the fix please share
Sent from my SGH-T959V using xda premium
this error shows up when you are clearing your cache. it is saying that there is no cache to wipe at this location.
it is fine. i get it too because i am not linking anything to my sd.
david, what concerns me is your phone responsiveness. what is your setup?
jager555 said:
this error shows up when you are clearing your cache. it is saying that there is no cache to wipe at this location.
it is fine. i get it too because i am not linking anything to my sd.
david, what concerns me is your phone responsiveness. what is your setup?
Click to expand...
Click to collapse
I was on kh2 with dr honks kernel, then i flashed icbinb kj1 and then to beautiful sgs4g ki3. Then i flashed aldrenaline shot. But my games lag and i have never gotten a quadrant above 2000 in all the time i have been flashing. I do not know what is causing it.
Sent from my SGH-T959V using xda premium
ok. can you follow fb's gb starter pack and start from scratch? make sure you wipe your sd card. before you do any of that, though, can you disable voodoo.
once you are back up and running on bsgs4g ki3, with busybox flashed and voodoo enabled, go into your system/etc folder and delete the init.d folder. now flash the adrenaline shot. let the phone sit for 10 min or so after you reboot. now go into tegrak and make sure you enable it at boot. go into optimizations and load everything according to dsextons values. makes you are on ondemand governor and deadline scheduler. now reboot after it watches stability. after all of that, let me know how it goes.
jager555 said:
ok. can you follow fb's gb starter pack and start from scratch? make sure you wipe your sd card. before you do any of that, though, can you disable voodoo.
once you are back up and running on bsgs4g ki3, with busybox flashed and voodoo enabled, go into your system/etc folder and delete the init.d folder. now flash the adrenaline shot. let the phone sit for 10 min or so after you reboot. now go into tegrak and make sure you enable it at boot. go into optimizations and load everything according to dsextons values. makes you are on ondemand governor and deadline scheduler. now reboot after it watches stability. after all of that, let me know how it goes.
Click to expand...
Click to collapse
Thanks, I might do that, i hate using odin though
yea, my quad scores are between 3300 and 3600+. lag is a thing of the past for me. lol. everything is super responsive and i get great battery life.
haha. im all proud of my phone right now, but watch me lose it or spill something on it. lol.
jager555 said:
yea, my quad scores are between 3300 and 3600+. lag is a thing of the past for me. lol. everything is super responsive and i get great battery life.
haha. im all proud of my phone right now, but watch me lose it or spill something on it. lol.
Click to expand...
Click to collapse
I might do what you said tomorrow, my case is a pain to put back on (for battery pulls) and my dad is the only one who can get it on lol. Its a body glove case.
oo yea. good luck with those. my dad has one of those too. they are definitely a pain. anyway, let me know if that works for you. if not, i have one or two more ideas on how to get it to work.
jager555 said:
oo yea. good luck with those. my dad has one of those too. they are definitely a pain. anyway, let me know if that works for you. if not, i have one or two more ideas on how to get it to work.
Click to expand...
Click to collapse
Can you give me your other ideas first? I despise odin cause it hard bricked my last sgs4g
Sent from my SGH-T959V using xda premium
David1239 said:
Can you give me your other ideas first? I despise odin cause it hard bricked my last sgs4g
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
On beautiful you may not want to flash the adrenaline series tweaks, Ravers ROM may not play nicely with it.
You could always reflash beautiful(just wipe caches and flash), without losing any data and see if your performance improves then wait for raver to update the ROM
Sent from my SGH-T959V using xda premium
To address your low quad scores, I hope you let your ROM sit for a good 10-15 minutes after flashing. Flashing a ROM will wipe your dalvik cache. You MUST let that rebuilt after a flash, which is why you need to wait a bit afterwards.
I tried playing with a ROM without getting the dalvik cache rebuilt, and I just got choppy performance with low Quadrant scores.
If this might be the case, go into CWM > advanced > wipe dalvik cache > reboot phone. Let your phone sit for 10-15 minutes and DO NOT touch anything.
bkoon1218 said:
To address your low quad scores, I hope you let your ROM sit for a good 10-15 minutes after flashing. Flashing a ROM will wipe your dalvik cache. You MUST let that rebuilt after a flash, which is why you need to wait a bit afterwards.
I tried playing with a ROM without getting the dalvik cache rebuilt, and I just got choppy performance with low Quadrant scores.
If this might be the case, go into CWM > advanced > wipe dalvik cache > reboot phone. Let your phone sit for 10-15 minutes and DO NOT touch anything.
Click to expand...
Click to collapse
I tried that twice, same quad scores I don't want to start from scratch, i am a nervous wreck when i use odin, My heart rate gets up to about 110 the second i hit start. And then im all like
"are the files in the right place??!!!!
"Is the usb cord secured??"
"OMGG Is it low on battery!"
You get it, i am just hysterical with that crappy piece of software.
EDIT: is anyone here still to help me with this!
Cmon guys! I was staring at the page for the t-mobile galaxy s2 today and telling my galaxy s 4g that it was a flamming piece of crap! Make my phone less laggy so I can be confident with it!! I am so sick of low quadrant scores and choppy animations I WANT SMOOTHNESS AND SPEED!!! Why can't my device get 3000+ quadrant scores I should just steal an sgs2
I hate this phone so much right now
QUIETLYloud said:
On beautiful you may not want to flash the adrenaline series tweaks, Ravers ROM may not play nicely with it.
You could always reflash beautiful(just wipe caches and flash), without losing any data and see if your performance improves then wait for raver to update the ROM
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I flashed XXX on BSGS4G and I got 3676 overclocked @ 1.3 and 2964 not overclocked.
Sent from my SGH-T959V
lenny hodapp said:
I flashed XXX on BSGS4G and I got 3676 overclocked @ 1.3 and 2964 not overclocked.
Sent from my SGH-T959V
Click to expand...
Click to collapse
But i dont get the same score as you. I only get around 2000
Sent from my SGH-T959V using xda premium
David1239 said:
But i dont get the same score as you. I only get around 2000
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Do you have ext4 on all partitions?
What's in your init.d folder?
Sent from my SGH-T959V using xda premium
I apparently have ext4 on all partitions. But voodoo control says ext4 enabled on /system,/cache/,data/, data/sdext2 I do not know what sdext2 is. In my init.d folder i have 00remount, 01acid_systcl
, 02kerneltweaks, 03sdcardspeedfix, and 04 systcl_tweaks.
Sent from my SGH-T959V using xda premium

Best CWM Gingerbread

Hey guys... I installed Dsexton rom: [rom] ICBINB KJ6 add on for airflips
I have some issues coming from text messages failing to send, EMAIL app gives me issues when sending emails via Swype keyboard.
Yahoo email wont send and stays stuck on Outgoing.
Im growing tired of it.... what rom does anyone recommend?
Valhalla or octane.
Sent from my SGH-T959V using xda premium
Lvnlegendinc said:
Hey guys... I installed Dsexton rom: [rom] ICBINB KJ6 add on for airflips
I have some issues coming from text messages failing to send, EMAIL app gives me issues when sending emails via Swype keyboard.
Yahoo email wont send and stays stuck on Outgoing.
Im growing tired of it.... what rom does anyone recommend?
Click to expand...
Click to collapse
I'm running the latest KJ6 leak, drhonk's KI1 kernel (with root, voodoo, cwm), with dsexton's Adrenaline Shot. I'm sure you'll get different answers from people, though.
Before you flashed, did you do a factory data reset, wipe caches, etc? I've flashed ROMs & had problems that were solved by doing the reset/cache wipes.
stephen_w said:
I'm running the latest KJ6 leak, drhonk's KI1 kernel (with root, voodoo, cwm), with dsexton's Adrenaline Shot. I'm sure you'll get different answers from people, though.
Before you flashed, did you do a factory data reset, wipe caches, etc? I've flashed ROMs & had problems that were solved by doing the reset/cache wipes.
Click to expand...
Click to collapse
i factory reset on the first rom, wiped cache and dalvik even battery.
Even repair permissions.
on updates i clear cace and dalvik....and it doesnt repair any issues.
I dont know if im doing something wrong..... I dont have access to a PC anymore to OdIn since im on a iMac.
I just grew frustrated and dont know what to do
Lvnlegendinc said:
i factory reset on the first rom, wiped cache and dalvik even battery.
Even repair permissions.
on updates i clear cace and dalvik....and it doesnt repair any issues.
I dont know if im doing something wrong..... I dont have access to a PC anymore to OdIn since im on a iMac.
I just grew frustrated and dont know what to do
Click to expand...
Click to collapse
I hear ya. I wish I had better advice. Exodian pointed out Valhalla and Octane. I never tried Valhalla but I had issues with Octane & the lock screen. Your mileage may vary, though
Good luck!
stephen_w said:
I hear ya. I wish I had better advice. Exodian pointed out Valhalla and Octane. I never tried Valhalla but I had issues with Octane & the lock screen. Your mileage may vary, though
Good luck!
Click to expand...
Click to collapse
Am I doing anything incorrectly?
What would u recommend? I factory reset and reinstall the rom?
and once their are updates what do I do
wipe cache on ext and wipe dalvik?
Lvnlegendinc said:
Am I doing anything incorrectly?
What would u recommend? I factory reset and reinstall the rom?
and once their are updates what do I do
wipe cache on ext and wipe dalvik?
Click to expand...
Click to collapse
I've only installed Octane via CWM. Past that, I've never installed a ROM that way. I'd follow Exodian's advice and give either Octane or Valhalla a shot. Both posts for the ROMs should have the proper method of installation.
Exodian said:
Valhalla or octane.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Which one do u prefer?
Lvnlegendinc said:
Which one do u prefer?
Click to expand...
Click to collapse
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better
stephen_w said:
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better
Click to expand...
Click to collapse
Ill try Valhalla and see how that goes..... thanks!!!
Lvnlegendinc said:
Ill try Valhalla and see how that goes..... thanks!!!
Click to expand...
Click to collapse
go with Valhalla, i tried them all, but Valhalla seems best for now. ICBINB was great but get laggy after a few days and needed reboot. Later ICBINB had issues here and there.
Valhalla with some build.prop and init.d tweaks runs great for me.
for init.d tweaks, find the "S98tweaks" file and change the freemem value. the last 3 is a little low as set and can cause low mem issues.
this is what i use
"2560,4096,6144,10240,12288,14336"
these build.prop helps
#makes calling out faster, less delay
ro.telephony.call_ring.delay=1000
#smoothertouch input. might already be 65 by default
windowsmgr.max_events_per_sec=65
#prox sensor tweak
mot.proximity.delay=75
#HW accelerate
debug.sf.hw=1
video.accelerate.hw=1
#for data link speed up
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
#enable JIT, just in case it's not by default
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
some of these build.prop settings may be redundant but doesnt hurt to have duplicates
stephen_w said:
I don't have a preference of the two. I never tried Valhalla. I tried Octane for about a day until I realized I had issues with the lock screen not working all of the time.
From what I've read a lot of people enjoy both. My suggestion would be to try one, see how well you like it, try the other, test it, see which suits you better
Click to expand...
Click to collapse
its not the roms fault lol magic locker can be special as it a addon

[Q] cyanogenmod7

First post! Hopefully it's in the correct place!
Anyways,
I have rooted my phone using the ACE Hack Kit. Once that was completed I wanted to use the cyanogen ROM(recommend from a friend). I fully wiped from phone and then ran the cyanogen zip. Everything is fine until I use my phone for an extended period of time(for instance when I'm trying to set up my phone). For some odd reason my phone will freeze and I will be forced to take my battery out. From what I've read/understand I have done everything properly. Is there anything that I possibly missed or have not done that will cause these random freezes?
Thank you,
-ant_wailes
ant_wailes said:
First post! Hopefully it's in the correct place!
Anyways,
I have rooted my phone using the ACE Hack Kit. Once that was completed I wanted to use the cyanogen ROM(recommend from a friend). I fully wiped from phone and then ran the cyanogen zip. Everything is fine until I use my phone for an extended period of time(for instance when I'm trying to set up my phone). For some odd reason my phone will freeze and I will be forced to take my battery out. From what I've read/understand I have done everything properly. Is there anything that I possibly missed or have not done that will cause these random freezes?
Thank you,
-ant_wailes
Click to expand...
Click to collapse
You or anyone wouldn't happen to know off hand if the kernel is UVed or OCed? This sounds like a UV or OC problem. Its an easy thing to fix if it is and I find that's is always best to rule out the easy stuff first! Some phones don't like to be UVed or OCed at all and freezes like this sometimes are caused by exactly that, UV or OC.
edit: and oh yeah, WELCOME! If you really like CM ROMs, give absolution a try (at the very least, if you or someone doesn't know if the kernel is UVed or OCed, you're be using a ROM I'm familiar with and if the problem persists on this ROM, diagnosing the a UV or OC problem should be fairly simple and I'll know how to get that fixed quickly for you since I haven't used the straight CM ROM in quite some time!) Actually come to think of it, did you check the md5 number? you could have downloaded a bad link causing a bad flash. It's rare most of the time but I have seen it happen..
If you havent downloaded any apps and dont mind reflashing the ROM just down load the full wipe place in ROOT (No Folder) of SD Card go into recovery.
Full Wipe (DO NOT RENAME AFTER DOWNLOAD)
http://www.megaupload.com/?d=CJPE5CB7
1. Choose zip from SD Card (Full Wipe 1.5) and Install
2. Choose zip from SD Card (Cyanogen ROM) and install
3. Reboot system and enjoy.
I dont like to do the wipe cache, wipe dalvik whatever method, the zip 1.5 does a full wipe all on its own. Its an EXT4 Wipe so I use it for all EXT4 ROMS that I like to try out.
!!!WARNING: When you flash the full wipe do not exit recovery without installing your ROM. So make sure that when you enter into recovery thru Rom Manager to reflash make sure that you have both (Full Wipe Zip) and (Your ROM Zip) on your SD Card before installing.
I tried cyanogen and completed hated it. Absolution is the Bomb!!! But to each their own flavor.
ENJOY
@reponse
First off, thank you for the responses!
@MMM-BACONSTRIPS
I do not know if the rom is OCed or UVed(had to look up those). Here's the link to the page where I downloaded it from. Also, I did not check the md5 numbers.
http://forum.xda-developers.com/showthread.php?t=965342
So far today it hasn't froze on me. However, if it does it again I'll def look at some different roms (absolution & puregandroid)
@Reinaldo33897
I did full wipe(I don't remember if the version was 1.5) before I installed the rom. If anything. I'll try absolution and puregandroid.
Once again, thank you!
-ant_wailes
ant_wailes said:
First off, thank you for the responses!
@MMM-BACONSTRIPS
I do not know if the rom is OCed or UVed(had to look up those). Here's the link to the page where I downloaded it from. Also, I did not check the md5 numbers.
http://forum.xda-developers.com/showthread.php?t=965342
So far today it hasn't froze on me. However, if it does it again I'll def look at some different roms (absolution & puregandroid)
@Reinaldo33897
I did full wipe(I don't remember if the version was 1.5) before I installed the rom. If anything. I'll try absolution and puregandroid.
Once again, thank you!
-ant_wailes
Click to expand...
Click to collapse
Not a problem man! Be aware though with the 1.5 wipe that it DOES format your system and data to EXT4, and if I'm not mistaken if you make a back-up on EXT 4 and then format back to EXT 3, it will not work and the same applies for vice versa. If you do end up trying Absolution just drop on by the Q & A if the freezing problem persists, I or one of the devs will try to give you hand the best we can..feel free to PM if you go with Absolution
So does the 1.5 wipe SDCard also? will EXT4 end up being a problem? Also, will do! I really appreciate the help!
I'll def give absolution a shot!
ant_wailes said:
So does the 1.5 wipe SDCard also? will EXT4 end up being a problem? Also, will do! I really appreciate the help!
I'll def give absolution a shot!
Click to expand...
Click to collapse
No, if you use the full wipe it pretty much just does the wipe data, wipe cache and wipe dalvik cache in one flashable zip. I typically use the 1.5 then wipe data, cache and dalvik cache. It is completely overkill and really not necessary but I do it just the same. No, EXT4 should no cause a problem. I'm pretty sure that almost all the ROMs are now EXT4 supported. I believe it would say it if it wasn't at this point. I know the major ROMS (ARHD, CD, Bindroid, MIUI) are all compatible with EXT4. The only issues you will find with EXT4 is the issue I mentioned in my first post and if you want to use gene's tool to unroot.
Welcome to xda and yes I had the same problem I was setting up setcpu and I sneezed and I accidentally pushed it all the way over to 1.9 and my phone didn't like it it just froze...I was worried :/ so I turned my phone back on and went into setting and forced setcpu to close (mind you it took a few restarts lol) but yes I had let it reset itself and now it's working again I just need to remind myself to do a nandroid once a day xD hehe
Sent from my Inspire 4G using xda premium
No problem we are here to help each other. Usually if I want to get back to EXT3 I just flash the rooted ATT gingerbread ROM (PD98 zip) in hboot.
Sent from my Inspire 4G using xda premium
Reinaldo33897 said:
No problem we are here to help each other. Usually if I want to get back to EXT3 I just flash the rooted ATT gingerbread ROM (PD98 zip) in hboot.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
I believe there is a 1.3 wipe that formats to ext 3 again, just in case the OP wanted to format to ext3 before flashing a new ROM as opposed to flashing a new rom and then having to wipe and then flash again.
Cool Thx I'll do s search for the 1.3. It be good to have.
Sent from my Inspire 4G using xda premium

Categories

Resources