Related
Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
There aren't any overclock kernels at this point. Its being worked on. Just be patient.
Fe_Man said:
Does anyone know of some good apps (preferably free) that I can use to overclock a rooted droid charge, with the latest altered beast ROM and kernel?
Click to expand...
Click to collapse
You can try tegrak from the market if you really want oc.
In all honesty, just wait for a kernel to come out that will actually oc. I'd love a kernel that uses voltage control and will wait for that...
Ahh, thanks. This is my first android device so I have no idea what to expect and when
If I can ever get my config straightened out, I was going to look into doing an OC kernel that uses Voltage Control, similar to nemesis2all's kernels for the Fascinate. Still trying to get a working config though.
My opinion though is that OCing the hummingbird processor is useless, and does little for performance on a day-to-day basis and only serves to give you big numbers in benchmarks while reducing battery life.
I mostly used the 1120 step skipping 1000 and scoring serious uv was awesome
For the people that want overclocking, here is your chance. I took my standard voodoo kernel, and put in the stuff needed to overclock it. Thanks to nemesis2all and his OTB kernel from the Fascinate for the code needed to get this to work. Also, use extreme caution when using the higher clock speeds. The stock "max" voltage for the CPU is 1300mv, and 1500MHz and 1600MHz are both at 1500mv, so it's heavily over-volted at the top end. By default, the system will boot to 1000MHz and you need to set the speeds you want in Voltage Control App. I don't personally use this because I think overclocking is useless, so any bug reports need as much information as possible, or they will be dismissed and not looked into at all. If you run into an issue with the system locking up, odds are that you have undervolted to much for a given clock speed. Other than that, you're on your own. Same FAQ applies as the regular PBJ kernel, so look there until I get a chance to post it here as well.
Installation Instructions:
1. Download zip
2. Transfer to SDCard
3. Reboot into recovery, you'll need to have CWM if you don't already
4. Install zip from SDCard and select the zip you downloaded.
5. Reboot and enjoy
0808
Make logcat an option that can be turned on/off
-From root shell, run "logcat-enable" to turn logcat on, "logcat-disable" to turn it off
Make /preinstall partition swap space
Fix problem with rooting phone on boot
Fix fix_permissions in recovery
Update to recovery
0731
Fix mount USB Storage in recovery
0730
Updated CWM binary
Custom boot animation support
0709
Voodoo Sound V10
0615
Overclocking - Use Voltage Control App to adjust clocks and voltages
0602
Voodoo Sound fixed - Thanks supercurio
Removed OnDemand
Added FIFO and BFQ IO Schedulers
Added tun.ko and cifs.ko
0531
Initial release, built from source
Undervolted
Voodoo lagfix available - Thanks supercurio
Updated compiler flags
Linaro Toolchain for cross-compiling
Battery hack to allow for non-OEM Batteries - courtesy of SirGatez
init.d support
SDCard speed tweak (via init.d script)
Upstream EXT4 Patches
VFAT Patch
TCP and CFS Tweaks to help data/performance
V(R) IO Scheduler
Auto-root on boot
Maybe missing some other stuff, check Github for full changes
TODO (somewhat in order of importance):
Smooth out boot animation
NOTES:
If you are experiencing problems, I need detailed info to be able to fix it or help you out. Failure to provide detailed info will mean I'm just going to ignore your problem as user error. Details would be something such as which kernel you are flashing (filename) and steps to reproduce the issue. Also, if you used any other kernels that had the same problem or didn't have the problem.
DISCLAIMER
By downloading and using the kernels, this signifies that you have read this full post and the FAQ before reporting an issue. You also take all responsibility if your phone breaks or your warranty becomes void (which, if you're flashing this, it already is). I offer no guarantees as to anything working, though I try not to release broken stuff, it happens sometimes.
FAQ Placeholder
2k+ on quadrant @ 1.4ghz... Niiiiice
Thanks imnuts
Undervolted and running ok so far.
Sent from my SCH-I510 using XDA App
Could you cuties advise on what sort of settings you're using for this?
I'm using the 'vr' setting with an Interactive governor at 1.1GHz and my phone is slowing to a crawl so it's hardly usable. I'm not looking for any crazy overclocking just something to keep my phone snappy whilst I keep in touch with my prostitutes and be sure they are working the proper street corners.
The weird thing is I'm not sure if Voodoo Lagfix is enabled. Voodoo control says yes, CWM says no and won't let me enable it that way, is there a way to be sure?
Spanks!
ZeppelinJ0 said:
The weird thing is I'm not sure if Voodoo Lagfix is enabled. Voodoo control says yes, CWM says no and won't let me enable it that way, is there a way to be sure?
Spanks!
Click to expand...
Click to collapse
Go into a Terminal Emulator on the device and type Mount. 3rd or 4th row on the list should show ext4. If it does then lagfix is enabled. If you do not see Ext4 and it says rfs still then it is not enabled.
will2live said:
Go into a Terminal Emulator on the device and type Mount. 3rd or 4th row on the list should show ext4. If it does then lagfix is enabled. If you do not see Ext4 and it says rfs still then it is not enabled.
Click to expand...
Click to collapse
Well it's definitely enabled. I just must have set the CPU settings poorly because this thing is crawling right now, I can't even scroll through the app drawer!
I've been trying to CWM back to the other PBJ kernels however my phone hangs on reboot, I'm guessing because those need to be flashed with Odin.
asenduk said:
2k+ on quadrant @ 1.4ghz... Niiiiice
Thanks imnuts
Click to expand...
Click to collapse
I wish I knew what I was doing wrong.. running at 1.4 and my quadrant scores are exactly the same.... not that it really matters but still...
imnuts said:
. I don't personally use this because I think overclocking is useless.
Click to expand...
Click to collapse
Just curious as to why you think it's useless. I am sure you know some thing that I don't so your opinion matters to me. I love the fact that I can overclock, but if it's not needed then I might not bother. I know it did make a difference for my DX.
das7771 said:
Just curious as to why you think it's useless. I am sure you know some thing that I don't so your opinion matters to me. I love the fact that I can overclock, but if it's not needed then I might not bother. I know it did make a difference for my DX.
Click to expand...
Click to collapse
Use a program like CPUSpy that shows you the clock speed stats of your phone. >75% of the time, it will likely be in 400MHz or less, this probably approaches >90% if you say 800MHz or less, especially if you are not a heavy user. At that point, why overclock your phone? To get the overclocking stable, you need increase voltages across the board, and despite undervolting, you'll never get the same power usage as you can with a non-overclocked kernel as some of the voltage changes you can't revert. My opinion is that while overclocking can smooth some stuff out, for most day-to-day usage, it has no practical benefits and only causes more battery drain than you would otherwise have. Given how precious battery life is these days, why knowing make your battery drain faster?
it's funny you say that becuase i noticed with ludeboy's kernel that when overclocking system panel very rarely showed my phone running over the stock speed. Usually it was as you stated some where around 800mhz..I understand what your saying...Thanks for the quick response.
So what if we run stock clock...but undervolt? Do you think we will see any batt savings?
Backup SD and app data b/c crashing/freezing can corrupt files.
Edit: Also keep Voltage Scheduler Remover on your phone just in case.
1600
1500
1400
1300 -0
1000 -25
800 -50
400 -75
200 -100
100 -150
"interactive" was unstable a couple kernels ago so I haven't tried it.
suzook said:
So what if we run stock clock...but undervolt? Do you think we will see any batt savings?
Click to expand...
Click to collapse
Potentially, yes, but you may lose stability.
Awesomeness
I love it. I can deal with a slightly shortened battery life. I wanted to OC because a lot of the more intense games don't run as smooth as I would like. With OC, its all butter. Thanks!! I have mine set at 1400, and it really didn't improve my quadrant scores, but there's a noticeable decrease in lag going from one app to another.
suzook said:
So what if we run stock clock...but undervolt? Do you think we will see any batt savings?
Click to expand...
Click to collapse
You would see better battery life at stock clock speeds if you just used the standard (ie. not overclocked) kernel I built.
Just wondering if you're going to branch off development of PBJT w/o overclocking separately - or if this is going to be built/rolled into future releases?
I'm on board with not thinking it's necessary - though I can see how the tinkerers and speed demons would love it. (And all the more power to them, literally)
I don't know imnuts, I always noticed when I forced the phone into a higher overclock it always seemed quite a bit snapier.
Keep it on conservative. Interactive is buggy.
ZeppelinJ0 said:
Could you cuties advise on what sort of settings you're using for this?
I'm using the 'vr' setting with an Interactive governor at 1.1GHz and my phone is slowing to a crawl so it's hardly usable. I'm not looking for any crazy overclocking just something to keep my phone snappy whilst I keep in touch with my prostitutes and be sure they are working the proper street corners.
The weird thing is I'm not sure if Voodoo Lagfix is enabled. Voodoo control says yes, CWM says no and won't let me enable it that way, is there a way to be sure?
Spanks!
Click to expand...
Click to collapse
underscored said:
Just wondering if you're going to branch off development of PBJT w/o overclocking separately - or if this is going to be built/rolled into future releases?
Click to expand...
Click to collapse
This will remain separate from the standard kernel most likely. I will see if I can build off of this source without overclocking and have it work, though I don't know if it will. I want to keep them separate for stability and battery life reasons.
I recently rooted my P999/G2x and installed CM7.1.0.1, and am extremely happy with it. Am looking to tinker just a *little* bit more, but have some questions... I have LOTS of answers on the forums, but am somewhat skeptical about the currency of some of the information out there (let's face it, stuff changes fast!). So, down to it:
Kernels:
- Did CM7 overwrite the stock kernel?
- I understand the benefits to changing the kernel; what about drawbacks?
- Does CWM back up your kernel with Backup and Restore? If not, how do you do this?
- Recommendations on a good, reliable kernel to use w/ CM7? I am looking at faux123's CM and morific's Trinity. Thoughts?
OC/UV:
- Can you OC on stock/CM7 kernel?
- What is the best app to manage OC/UV? I have my eye on setCPU, cpu Master, and Android Overclock (JRummy16)
- Any recommended settings for the G2x? Any settings to avoid? My plan is to incrementally adjust, but don't really have an idea as to where to start.
Thx in advance!
- Did CM7 overwrite the stock kernel?
Yes
- I understand the benefits to changing the kernel; what about drawbacks?
Since not all the chips are made in the same way, you could soft brick your phone if you try to flash an undervolted kernel. This is the way mine is, and it's somewhat irritating but not all that bad using the stock voltage and overclocking to around 1.4ghz rather than 1.5ghz+. Also, battery life should be expected to be less with an overclocked CPU. It's up to you to decide how you want to run your device.
- Does CWM back up your kernel with Backup and Restore? If not, how do you do this?
Yes, backup creates an image of the entire thing. Before you start making changes, always make a backup so you can revert to previous settings should you soft brick your device. Make a backup, clear cache/dalvik, flash the kernel and reboot the phone. First boot times will always be a little longer when flashing a kernel, so be patient and don't pull your battery right away. For me personally, if it hasn't done anything noticeable after about ten minutes, I pull my battery. Reboot into recovery and restore from the backup you made. If you started off trying an undervolted kernel, time to try the standard voltage now!
- Can you OC on stock/CM7 kernel?
No, and you'll be able to tell once you flash CM7 and use SetCPU (or whatever you use) and see the max is still at 1ghz.
- What is the best app to manage OC/UV? I have my eye on setCPU, cpu Master, and Android Overclock (JRummy16)
Personal preference. I think probably SetCPU is used by most people including myself.
- Any recommended settings for the G2x? Any settings to avoid? My plan is to incrementally adjust, but don't really have an idea as to where to start.
If you want to be safe just start out at 1ghz. If you have no random reboots with your kernel then move it up to 1.1 or 1.2 and see if it's stable there. Personally, I just went ahead and overclocked to 1.4ghz. For the most part people don't really have problems with this I guess. The problems usually lie in whether or not you are undervolted and by how much. If you find your device can run an undervolted kernel, I would just leave the undervolt settings the way they are. As I said, I can't run OC/UV and have to use SV, so I never touch any of the voltage settings.
Hope this helps!
Using eagle blood (cm7 based) with faux kernel.
I heard trinity kernels may have random reboot but don't quote me on that.
Try faux kernel with oc/uv. Its very good, latest is 0.48. But if you go with the ds version (debaouch?) The battery percentages are all over the place... Lol one minute its 50% the next it may be 34%...
Use set cpu. I've uv additional 25mv across the board with no I'll effects. Screen off profile at 503 mhz max and some other profiles will have you getting 24hours easily with normal usage.
Make sure test it out before you "set on boot"...
Sent from my LG-P999 using XDA App
I tired using DS OC/UV Kernel Version 0.4.8 kernel on my g2x running the latest stable release of CM7 1.0.1. Followed all the necessary step of wiping cache, and darvik but when I reboot, I get the blue lg sign after which the screen just black out and its stuck like that till i pull the battery out. Any one know what I may be going wrong here? ? ?
Trinity ELPmax with Phoenixblood is the best combo. Trinity batterylife is amazing. When i leave the house my phones battery is 100%. 11 hours later (I when i make it home) my battery is always under 60% but never less then 40%. I play music as soon I leave the house, and till I get in the house. I also turn of data when not using and have setscpu set to 900mhz max and screen off profile set to 432 max 216 min.
Just my personal results
e4e5nf3nc6 said:
- Did CM7 overwrite the stock kernel?
Yes
- I understand the benefits to changing the kernel; what about drawbacks?
Since not all the chips are made in the same way, you could soft brick your phone if you try to flash an undervolted kernel. This is the way mine is, and it's somewhat irritating but not all that bad using the stock voltage and overclocking to around 1.4ghz rather than 1.5ghz+. Also, battery life should be expected to be less with an overclocked CPU. It's up to you to decide how you want to run your device.
- Does CWM back up your kernel with Backup and Restore? If not, how do you do this?
Yes, backup creates an image of the entire thing. Before you start making changes, always make a backup so you can revert to previous settings should you soft brick your device. Make a backup, clear cache/dalvik, flash the kernel and reboot the phone. First boot times will always be a little longer when flashing a kernel, so be patient and don't pull your battery right away. For me personally, if it hasn't done anything noticeable after about ten minutes, I pull my battery. Reboot into recovery and restore from the backup you made. If you started off trying an undervolted kernel, time to try the standard voltage now!
- Can you OC on stock/CM7 kernel?
No, and you'll be able to tell once you flash CM7 and use SetCPU (or whatever you use) and see the max is still at 1ghz.
- What is the best app to manage OC/UV? I have my eye on setCPU, cpu Master, and Android Overclock (JRummy16)
Personal preference. I think probably SetCPU is used by most people including myself.
- Any recommended settings for the G2x? Any settings to avoid? My plan is to incrementally adjust, but don't really have an idea as to where to start.
If you want to be safe just start out at 1ghz. If you have no random reboots with your kernel then move it up to 1.1 or 1.2 and see if it's stable there. Personally, I just went ahead and overclocked to 1.4ghz. For the most part people don't really have problems with this I guess. The problems usually lie in whether or not you are undervolted and by how much. If you find your device can run an undervolted kernel, I would just leave the undervolt settings the way they are. As I said, I can't run OC/UV and have to use SV, so I never touch any of the voltage settings.
Hope this helps!
Click to expand...
Click to collapse
+1 to everything you said
just to add if you want to over clock then go with faux or trinity. the cm7 kernel is faster then both @1000mhz, if speed is what your looking for without the dangers of oc. The stock cm7 kernel also lacks the ability to under volt soo battery life might not be as good though
Rbern144 said:
I tired using DS OC/UV Kernel Version 0.4.8 kernel on my g2x running the latest stable release of CM7 1.0.1. Followed all the necessary step of wiping cache, and darvik but when I reboot, I get the blue lg sign after which the screen just black out and its stuck like that till i pull the battery out. Any one know what I may be going wrong here? ? ?
Click to expand...
Click to collapse
Format data/ factory reset.
Wipe all cache.
Format system. (don't forget)
Flash cm.
Flash kernel.
It may take a while for the system to boot, 5 min. Let it load, and reboot, enjoy.
Sent from my LG-P999 using XDA App
i flashed ARHD with overclock kernel
my cousin tell me it will 100% damage you device and its just from pcs have cooling system!!!!!! anyway:
how to turn it info normal with ARHD and all currently setting and... don't lsoe my data?
if impossible how to do it but i wonna my arhd rom and....
sorry for my English
plz fast...
I believe that the overclocked kernel that comes with ARHD makes the CPU run at 1.5 GHZ, which is the default clockspeed for the Snapdragon MSM8260 chipset, therefore it won't burn anything. Don't worry.
kamranhaghighi said:
i flashed ARHD with overclock kernel
my cousin tell me it will 100% damage you device and its just from pcs have cooling system!!!!!! anyway:
how to turn it info normal with ARHD and all currently setting and... don't lsoe my data?
if impossible how to do it but i wonna my arhd rom and....
sorry for my English
Click to expand...
Click to collapse
if you have normal sensation and your phone is over-clocked to 1.5 Ghz then don't worry as the actual processor speed is 1.5 GHz only and it was under-clocked to 1.2 GHz by default to support the poor battery(1520 mah one)
If you still want to go back to default
then flash ARHD again without superwipe( this wont touch your apps and data)
and this time just choose stock kernel instead of custom kernel
(in 4Ext Recovery it asks you to select "No" if you want to install stock kernel
afaik)
EDIT: don't forget to make a nandroid backup before trying this...(IT will save you in NEED)
AND most important of all
Dont forget to press THANKS button if you were successful
Some people even overclock theirs up to 1.7 GHz. Don't worry about it ... as long as your phone can handle it and doesn't get hot by itself, you'll be fine. Of course, it will get hot when using heavy apps or playing games, i just stop playing games when it gets really hot ... mine goes up to 67 degrees Celsius hehehe... just dont go beyond 1.7 GHz i guess. Thats the highest i will go, in my opinion...
oh if you want to underclock it, just use System Tuner app... dont go below 1188 GHz atleast(this is stock speed in Sensation 4G)
I'm at 1.7ghz with that Rom and no issues. It's nice.
I put my wife's at 1.2ghz still just in case there's stability issues as she doesn't understand those and just complains lol.
ganeshp said:
If you still want to go back to default
then flash ARHD again without superwipe( this wont touch your apps and data)
and this time just choose stock kernel instead of custom kernel
(in 4Ext Recovery it asks you to select "No" if you want to install stock kernel
afaik)
Click to expand...
Click to collapse
You don't have to do all that. You can flash a kernel by itself. You don't have to overlay the whole ROM. Reflashing the kernel by itself takes about 2 and a half seconds.
There are plenty of other kernels to choose from that will work with ICS, including the stock one.
However!!! You can limit the kernel you have to only allow it to clock up to 1.5 or 1.2 if it makes you happy. Just get System Tuner from the market. You can control the clock speed from it and limit it to whatever you want.
Also..wheveryone else said was true. You're good with the higher clock speed.
I use bricked kernel overclocked to 1.83. No worried about heating because the thermal protection built into the kernel will throttle the CPU speed down if temp gets to high. Just flask the kernel, and don't look back.
OK OK i trust you!!!!!!
OK i restore my kernel to 1.5ghz !!!!! and after a time i use the 1.5ghz i use 1.8ghz!!!!!!!!!! IF MY PHONE BURNS I KILL YOU:d!!!!
Here everything is expansive!!!!
Hello,
I just installed the ressurection remix 1.5 rom, in combination with Thoravukk kernel, and i set my cpu to 1.6 ghz.
Set it at boot, and rebooted the device.
I'm really impressed about the boot speed, and overall smooth scrolling etcetera.
My question is, is there something else i need to do to keep it stable, or change other settings, like voltage, gpu, ram or anything else?
Because i'm really happy with the changes it's given me, but i don't want problems in a while.
Batterylife is not an issue, i don't expect it to last as long as it did on 1.2 ghz
Looking forward to information.
If i don't need to do anything else, i would like to know as well.
Thank you
Lost in space xD
Can any one help me with some info on where can I download the Thoravukk kernel. I've entered around 3 or 4 (including the official team blockbuster) sites and I don't see any download links
Why do you have it overclocked to 1.6? is there even a difference in performance? The phone's so powerful already lol, you could UV for better battery life, increase gpu for performance (in games) I don't think you need more Ram, I have the OG epic 4g and I have plenty lol
As far as stable, pushing your processor may create problems that you won't necessarily see at stock frequency, you get what ask for.
Sent from my SPH-D700 using xda premium
Fire n mage said:
Why do you have it overclocked to 1.6? is there even a difference in performance? The phone's so powerful already lol, you could UV for better battery life, increase gpu for performance (in games) I don't think you need more Ram, I have the OG epic 4g and I have plenty lol
As far as stable, pushing your processor may create problems that you won't necessarily see at stock frequency, you get what ask for.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Exactly what I had in mind
The Note is plenty powerful even amongst the current crop of droids. And no app requires a dual-core 1.6Gghz. The stock frequencies were chosen for a reason, I'm guessing it's quality. All chips burn out in time, they have a lifespan. But you overclock your device and you burn your chip faster.
So what I'm saying is stay with the original frequencies. Port an optimized ROM and that should suffice.
Thanks for your answers, but i really notice the differenct, especially with a reboot, it normally takes 30-40 seconds, and now in less then 10 secs i'm at my home screen, and ready to go.
Also it is smoother with scrolling, and apps launch even faster.
so the diff is hugh to me.
Battery life is not an issue, i said, even if it goes to crap, i replace it for €20,- (Just about $25,-)
And the performance is nice, but my question was if i have to set other things.
And i use lulzactiv governor, it uses only what it needs, it's not always the full 1.6 ghz. Only when speed is preferred.
@Kenepo112x40 this is where i found it, i use it now, so it works:
http://forum.xda-developers.com/showthread.php?t=1574672
Edit: There's a zip in attachment, that's the one, install in cwm recovery
SGS2-1989 said:
Thanks for your answers, but i really notice the differenct, especially with a reboot, it normally takes 30-40 seconds, and now in less then 10 secs i'm at my home screen, and ready to go.
Also it is smoother with scrolling, and apps launch even faster.
so the diff is hugh to me.
Battery life is not an issue, i said, even if it goes to crap, i replace it for €20,- (Just about $25,-)
And the performance is nice, but my question was if i have to set other things.
And i use lulzactiv governor, it uses only what it needs, it's not always the full 1.6 ghz. Only when speed is preferred.
@Kenepo112x40 this is where i found it, i use it now, so it works:
http://forum.xda-developers.com/showthread.php?t=1574672
Edit: There's a zip in attachment, that's the one, install in cwm recovery
Click to expand...
Click to collapse
I had to go and look for the 2.30 on another post cuz the 2.41 doesn't allows me to have data on the phone. Thanks anyway man, the problem was that they hadn't uploaded the link yet on the official site but they did yesterday.
To OP, I suggest u increase voltage at over locked 1.6 to keep it stable