Related
This is doing my head in to the point I have borrowed a new HTC Sensation only to find the problem exists on this phone also.
When using the Camera App If I hit the power button the screen turns off. I am then unable to switch the screen back on - It appears the phone crashes.
Behaviour some times differs depending whether I have taken a photo or not.
The following behaviour is observed:
The lights stay illuminate on the soft keys at the bottom of the screen.
The phone can receive calls how ever it doesn't ring and I unable to answer them.
This problem is confirmed on 2 seperate devices which have been flashed with:
Android Revolution HD 3.6.12
10.58.9035.00U_10.15.9035.02_2 radio
I have also run super wipe on the phone before installing the HD Rom.
Please help!?
Ive also had this problem on a few diffrent roms.
But i flashed amaze camara update, and not had any prob since.
Im now running the latest ICS with sense, with what ever camara software came with the rom. And not had any problem
big_sw2000 said:
Ive also had this problem on a few diffrent roms.
But i flashed amaze camara update, and not had any prob since.
Im now running the latest ICS with sense, with what ever camara software came with the rom. And not had any problem
Click to expand...
Click to collapse
Cheers moved to ICS and its now fixed.
edwardblum said:
Cheers moved to ICS and its now fixed.
Click to expand...
Click to collapse
Having the same issues on both mine and my wives phones, both running AR 3.6.11 along with lag and other issues! Pretty fed up - and considering a different ROM. How is the ICS ROM, any issues like the 3.6.11? Is it hard to install?
I would try Elegancia ICS. Maybe a little pain to install, if you need to update your firmware.
http://forum.xda-developers.com/showthread.php?t=1429953
Firmware
http://forum.xda-developers.com/showthread.php?t=1432220
You may have to superCID if the firware dont work. Also easy todo
See post 4
http://forum.xda-developers.com/showthread.php?t=1192300
Have a read of the last 10 pages or so of the ICS thread for superCID info if your stuck, but it is easy.
I will give it a try! Do you just download the zip firmware and flash it?
It's not a rom problem, it is faux's kernel problem.
You can flash bricked kernel to solve.
banasik72 said:
I will give it a try! Do you just download the zip firmware and flash it?
Click to expand...
Click to collapse
Put the img zip directly on the SD card, not in any folder.
Boot the phone in to bootloader Power on volume down same time.
Just follow the instructions.
DO NOT POWER OFF REMOVE BATTERY ETC.
You will have to remove file from memory card before rebooting.
If you fail with the upload, then you will have to superCID
First sorry for bad English
I install 9 or 10 ICS beta rom and all of them said wifi work correctly.
But My wifi dont work
In some Rom it start but cant find any wifi
and in some other rom wifi can not be switch on
when i back to not ics rom it work correctly but in all ics rom I have this Problem.
Ram I install:
MIUI 4 proxuser
CM9 Beta
Virtuous Quattro Beta 3-4-5-6-7-8
Ice Cream Sandwich for Desire S [BETA6R2] [BETA7] [BETA8R4a]
...
ayene said:
First sorry for bad English
I install 9 or 10 ICS beta rom and all of them said wifi work correctly.
But My wifi dont work
In some Rom it start but cant find any wifi
and in some other rom wifi can not be switch on
when i back to not ics rom it work correctly but in all ics rom I have this Problem.
Ram I install:
MIUI 4 proxuser
CM9 Beta
Virtuous Quattro Beta 3-4-5-6-7-8
Ice Cream Sandwich for Desire S [BETA6R2] [BETA7] [BETA8R4a]
...
Click to expand...
Click to collapse
This could be a problem with your radio.
Have you tried flashing the latest radio? Look in the Index for the latest radio...
LINK TO INDEX
I Flash this one now
[RADIO][21 OCT 11]NEW Radio From OTA: 20.4801.30.0822U_3822.10.08.04_M
But no change on my phone with miui 4 proxuser
shood i reinstall the room after update radio?
ayene said:
I Flash this one now
[RADIO][21 OCT 11]NEW Radio From OTA: 20.4801.30.0822U_3822.10.08.04_M
But no change on my phone with miui 4 proxuser
shood i reinstall the room after update radio?
Click to expand...
Click to collapse
Flashing ROM and radios are two different things. One does not interfere with the other. So if you've flashed latest radio you shouldn't reflash ROM
Let us know some details:
1. How do you flash ROMs? Full wipe, only cache/dalvik, etc?
2. Have you checked the WiFi advanced settings to have the band set to "Auto" or "2.5 GHz"? Not al routers/APs support 5 GHz WiFi band
3. After flashing ROMs are you restoring something with Titanium? For first you shouldn't...maybe there are some incompatibilities.
Try also with this radio instead 20.48.30.0822U_3822.09.08.20 (it's the previous one not latest). For me it's working better than with the latest.
After flashing radio, remain in Recovery and from "format/wipe" menu select to format all partitions (complete wipe without sdcard), then flash the ROM. I suggest for the beginning to choose Virtuous RC1 (latest) or CM9 and see if WiFi works...you can wipe again and flash MIUI after. Do not restore anything with Titanium backup after flashing the ROM. Just boot and set your WiFi access point. Check if it connects. Alternatively download WiFi Analyzer tool from HERE (it's not latest version but if you don't have Internet access on phone you can't download from market, so it's a good thing that you can manually download the APK and put it on your sdcard). Check and see with the tool if you can gain extra info on the networks in your proximity
I have the same problem... Problem is that I cannot switch on wifi (problem is not with connecting)
Virtuous Beta9 - I can switch on wifi and connect
RC1, RC2, miui... I cannot... so strange...
(bootloader unlocked with htcdev, s-on, the same radio as ayene, wipe all...)
I cannot flash previous radio... still have the latest one. I think problem is with htcdev unlocking and s-on...
Rapier said:
Flashing ROM and radios are two different things. One does not interfere with the other. So if you've flashed latest radio you shouldn't reflash ROM
Let us know some details:
1. How do you flash ROMs? Full wipe, only cache/dalvik, etc?
2. Have you checked the WiFi advanced settings to have the band set to "Auto" or "2.5 GHz"? Not al routers/APs support 5 GHz WiFi band
3. After flashing ROMs are you restoring something with Titanium? For first you shouldn't...maybe there are some incompatibilities.
Try also with this radio instead 20.48.30.0822U_3822.09.08.20 (it's the previous one not latest). For me it's working better than with the latest.
After flashing radio, remain in Recovery and from "format/wipe" menu select to format all partitions (complete wipe without sdcard), then flash the ROM. I suggest for the beginning to choose Virtuous RC1 (latest) or CM9 and see if WiFi works...you can wipe again and flash MIUI after. Do not restore anything with Titanium backup after flashing the ROM. Just boot and set your WiFi access point. Check if it connects. Alternatively download WiFi Analyzer tool from HERE[/URL] (it's not latest version but if you don't have Internet access on phone you can't download from market, so it's a good thing that you can manually download the APK and put it on your sdcard). Check and see with the tool if you can gain extra info on the networks in your proximity
Click to expand...
Click to collapse
1. I always use full wipe
2. miui wifi dont have advanced setting
3. I dont restor any thing. the first thing i do is cheking wifi
I will do other solution u saye to see if it work
tnx
I do this things too
1. Full wipe and flash Virtuous Quattro RC2 rom and without any restor or install apps it dont work
2. i flash the 20.48.30.0822U_3822.09.08.20 radio so it dont work
3. i chek other band in advanced wifi but it dont work
4. install wifi analyzer and turn on wifi and open the wifi analyzer. nothing happend. but if i turn off wifi and open the app it say "the app needs Wi-Fi to work. so it is different between switch on and off wifi. but no network found.
That's weird...try to take a logcat and post it here.
When going to WiFi settings and try to activate it, what does it say? Usually is something like "connecting", then "Authenticating...", then "Acquiring IP address from ...". Are any of these steps showing?
By "not work" you mean WiFi is not activated or you have it active but not connected to any network (you said that in some ROMs is activated and in some not)? How's on Virtuous? If you are in WiFi settings and wifi is not activated, what happens when you repeatedly press on/off?
Rapier:
my problem is, that in Virtuous B9 I can activate wifi, but in RC1, RC2 I cannot activate wifi... Button ON is greyed... nothing happened after I pressed On/OFF, cannot switch on..
Virtuous B9 no problem with activate, connecting...
And I dont install Virtuous B9 but for ex in MIUI 4 when i turn on the wifi , it says enabling and will stay on it. if I go out and come into the wifi again there is no enabling and it seem wifi is on. but when I press scan , no network will be find.
soory for bad english
AYENE: yes, I have same problem... I cannot activate wifi in miui 4 rom (frozen "enabling"), CM9, virtuos quattro rc 1, rc 2 (inactive button)...
BUT try virtuous beta9... it is working fine... (but camera doesn`t in this release...)
A have a same problem but i can use only virtuos quatro beta 3 :-(
Sent from my HTC Desire S using xda premium
now I`m back to locked bootloader and official ruu_saga_s_htc_europe_2104018_radio_204801300822u_3822100804 rom...
I would like to downgrade to ruu_saga_htc_europe_1474014_radio_2028i30085au_3805060203_m_release_199410_signed.exe and old hboot, make s-off and then reflesh RC2...
jsarina said:
now I`m back to locked bootloader and official ruu_saga_s_htc_europe_2104018_radio_204801300822u_3822100804 rom...
I would like to downgrade to ruu_saga_htc_europe_1474014_radio_2028i30085au_3805060203_m_release_199410_signed.exe and old hboot, make s-off and then reflesh RC2...
Click to expand...
Click to collapse
I cannt wait for result.
Unlock htcdev is not working today... web maintenance... may be tomorrow :-(
And I downgrade my Hboot from 2.000.2 to 0.98.2000 and don't work.
Sent from my HTC Desire S using XDA App
How did you change hboot? Did you change radio too?
I change it by fastbootcommander. I changed radio in hboot 2.00.2000. But in this hboot, no.
Can anyone else who have ics in his phone and wifi work, say the version of hboot and radio?
Sent from my HTC Desire S using XDA App
HEEEEEY, problem solved!!!
RC2 -wifi is working, camera is working!!!
Soooo, what I did?
At first, I did downgrade to this ROM : ruu_saga_htc_europe_1474014_radio_2028i30085au_380 5060203_m
How? It is very easy, this thread will help you, I am sure (many thanx to all of them)
HTML:
http://forum.xda-developers.com/showpost.php?p=20535265&postcount=26
Then revolutionary S-ON --> S-OFF
HTML:
http://revolutionary.io/
and then finally I flashed Virtuous RC2 and everything is working... except known bugs...
GOOD LUCK!
Wow. Good news. I will test it now.
Sent from my HTC Desire S using XDA App
oh man.
i falsh that room and
i go to bootloader and my phone cant go to recovery or rom and my phone is s-on
i dont know what to do
Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)
Hello,
I can not find similar topic in the HELP forum so let me start it (at least for new users of XDA forum).
At the very beginning I would like to thank bilal_liberty for all his work given for Liberty ROM. Same time I want to thank all participants of his success - all developers, testers and helpers for their time and patience..
Now, my problems:
1) I can not run WIFI hotspot. The icon is working, working and... doing nothing.
2) From time to time I can not run WIFI connection in my home. Of course everything is "ON", I tried to restart the phone, turn of the data transfers and some other tricks - the connection was working just after installing the ROM, but it is a lottery.
3) I have an issue with memory: I can't see the "SDCARD" memory - only when in TWRP mode, after mounting the SDCARD drive. When connecting in normal mode through USB - I can see only about 2 GB.
Is there any solution for those problems?
HTC One S(4), s-off, TWRP 2.7.0.1, hboot 2.15 (I don't believe 2.16 will change it but "if" - I'll upgrade, of course...
Thanks for any help.
Hello xklonik and welcome to our community,
to answer your questions in descending order.
3) Sixth Sense is not compatible with hboot 2.15, so that's why you have problems with your sd card inside the rom (recovery is somewhat, "standalone")
2 + 1 ) These problems are well known issues and reported over the development thread. Developers are working hard to try and fix these issues but it's also a fact that without the source code of the sense roms, there's only so much we can do.
Also maybe because of your incompatible boot, these issues are getting worse.
There are two solutions:
a) Either upfrade to hboot 2.16 (with the procedure at maximusHD thread)
or if you are scared of this procedure
b) stay on hboot 2.15 and use LibertyMAX instead (both hboot supported and is more stable in my opinion - and by stable I mean no weird wifi issues whatsoever)
Other than that, both roms are excellent and it's really a matter of preference which one to choose. :good:
ChrisAr said:
Hello xklonik and welcome to our community,
to answer your questions in descending order.
3) Sixth Sense is not compatible with hboot 2.15, so that's why you have problems with your sd card inside the rom (recovery is somewhat, "standalone")
2 + 1 ) These problems are well known issues and reported over the development thread. Developers are working hard to try and fix these issues but it's also a fact that without the source code of the sense roms, there's only so much we can do.
Also maybe because of your incompatible boot, these issues are getting worse.
There are two solutions:
a) Either upfrade to hboot 2.16 (with the procedure at maximusHD thread)
or if you are scared of this procedure
b) stay on hboot 2.15 and use LibertyMAX instead (both hboot supported and is more stable in my opinion - and by stable I mean no weird wifi issues whatsoever)
Other than that, both roms are excellent and it's really a matter of preference which one to choose. :good:
Click to expand...
Click to collapse
Hi ChrisAr.
Thanks for your reply.
I'm not scared with the hboot change I just couldn't see any reason to change it if the ROM (at all) was working. Now I see that my issues can be caused by this tinny missing so I'll update hboot after working hours
I'll update this thread after the upgrade.
Thanks for help.
No problem, glad to help
Be aware though. After upgrading hboot(following carefully MaximusHD's instructions), you must reflash recovery with 2.16 hboot support which can be found here -> mdmower.cmphys.com/twrp-ville/ (Cannot post full link due to post restrictions)
Just be sure to flash the one under /data/media storage (HBOOT 2.16.0000 only) header.
:good:
so.. there is a problem...
without any issue I succeed with hboot update to 2.16... however..
as you suggested, I also downloaded and upgraded TWRP with hboot 2.16 support (both, twrp-2.7.1.0a-ville-dm, twrp-2.7.1.2-ville-dm)...
unfortunately, after reboot to TWRP, I can not "mount SDCARD", which previously was available in hboot 2.15 & TWRP 2.7.0.1 in MOUNT menu..
also - I don't know why - I could not find my ROM on SDCARD and actually, I could not access the card at all...
so, I can not install anything.. I can boot to bootloader or TWRP, I can communicate with the cellphone via fastboot (I can change TWRP to any version I want)... I tried to flash-in my old version of TWRP, properly working with 2.15, but under 2.16 I have only 48 MB of free space when mounting the SDCARD
any advice?
I have:
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-HTC__032
HBOOT-2.16.0000
RADIO-1.20.50.05.16
OpenDSP-v33.1.0.45.1128
twrp-2.7.1.2-ville-dm
-------------------------------- edit ----------------------------------------
ok, I found the way out...
since my connection with phone works perfectly, only one way to deal with lack of space and no ROM on SDCARD was to push it via adb
adb push yourrom.zip /sdcard/yourrom.zip
the rest after this was easy (recovery -> install ROM -> configure -> enjoy)...
thanks again for links and support!
xklonik said:
so.. there is a problem...
without any issue I succeed with hboot update to 2.16... however..
as you suggested, I also downloaded and upgraded TWRP with hboot 2.16 support (both, twrp-2.7.1.0a-ville-dm, twrp-2.7.1.2-ville-dm)...
unfortunately, after reboot to TWRP, I can not "mount SDCARD", which previously was available in hboot 2.15 & TWRP 2.7.0.1 in MOUNT menu..
also - I don't know why - I could not find my ROM on SDCARD and actually, I could not access the card at all...
so, I can not install anything.. I can boot to bootloader or TWRP, I can communicate with the cellphone via fastboot (I can change TWRP to any version I want)... I tried to flash-in my old version of TWRP, properly working with 2.15, but under 2.16 I have only 48 MB of free space when mounting the SDCARD
any advice?
I have:
***TAMPERED***
***UNLOCKED***
VLE PVT SHIP S-OFF RL
CID-HTC__032
HBOOT-2.16.0000
RADIO-1.20.50.05.16
OpenDSP-v33.1.0.45.1128
twrp-2.7.1.2-ville-dm
-------------------------------- edit ----------------------------------------
ok, I found the way out...
since my connection with phone works perfectly, only one way to deal with lack of space and no ROM on SDCARD was to push it via adb
adb push yourrom.zip /sdcard/yourrom.zip
the rest after this was easy (recovery -> install ROM -> configure -> enjoy)...
thanks again for links and support!
Click to expand...
Click to collapse
Sorry I didn't see your post earlier. I was away on vacation.
In that time, sixth sense got 2.15 support.. Irony
Not sure why you had that problem. Maybe you had to perform a full wipe (from the recovery options) to force re-partitioning. Old hboot had created different partitions on phone's memory and you had to create them from scratch, for the new hboot.
Also I assume you know that when you change hboot, you have to re-install also everything from scratch since everything installs according to hboot. If you just upgraded hboot, it would not work as expected if you just left the old installation there.
Anyway, glad to hear this worked for you and that you also found a workaround with "adb push" by your self. Good job :good:
Enjoy this awesome ROM. (Just flashed it too this morning) :highfive:
yeas... actually I did the instalation agait too..
and unfortunately wifi still wont work
btw. I'm always performing full wipe, so have no idea what happened then..nevertheless, I've full space and rest of toys, just without wifi and hot spot, what in fact, eliminates this ROM.. :/
unfortunately 2) no one answered my mail regarding any ROM supporting all One S features (camera, wifi, hotspot, BT) and Sense 6 on newest kitkat... so I'm still in the oblivion.. waiting for some light..
just to confirm - build 106 - after changing 1.35a.32.45.27, WCNSS, ADSP, wifi & hotspot still not working,
what is interesting, previously the wifi icon only blinked - currently "scanning" & "disconnecting" subtitles are visible under this icon...
also previously just right after installing I could connect to my network and wifi was turned off just after authorisation and few next screens..
now with new 1.35a.32.45.27, WCNSS, ADSP I can not join at all..
I've been following your posts on the development thread.
This issue is really weird...I wanted to write about different WCNSS versions (some people flashed it from the Viper ROM) but I couldn't post due to post count restriction. Anyway, bilal noticed that too in his recent post. I have flashed everything you flashed and only reverted to radio 1.20 but with hsdpa fix (it is included in one of the flashable radios, don't know if it's included in the version you downloaded)
WiFi is working perfectly for me. Only this "keep always on" issue.
Hi everyone,
First off thanks to bilal for his amazing work, second I hope I am not off topic since this is a help thread for Liberty SixthSense.
After reading the entire development thread on this ROM, I still can't figure out how to install it on hboot2.15. I get a feeling that there is a different way to install this rom on 2.15, or I'm missing something.
So yes, I download the zips of r106 version and the radio 1.20 version. But afterwards I just do as I would do with any other ROM? I mean full wipe, dalvik cache wipe, recovery cache wipe, and then install from zips? and if so, which should be instlled first, the radio or the whole rom?
Mindue, I am noob at this, so I don't understand everything I've read so far and this would be the only way I know to install a rom.:silly:
quick checklist:
- S4
- recovery TWRP 2.7.1.0 the one from Cyanogenmod 11 since I'm on this rom now.
- S-OFF
- hboot 2.15
Hi!
I think you are good to go. Since you don't know any other way to install a ROM (adb sideload/push), I would say to be carefull what you wipe because you might erase the OS and you won't be able to transfer the zips from your computer (regularly, like a flash drive).
Other than that everything is good...recovery is for right hboot(since you already have cm11; official I suppose which is for 2.15)
Flash radio
Flash ROM -> choose full wipe during install
Never heard of recovery cache wipe so don't mess with that
Best of luck! :good:
ChrisAr said:
Hi!
I think you are good to go. Since you don't know any other way to install a ROM (adb sideload/push), I would say to be carefull what you wipe because you might erase the OS and you won't be able to transfer the zips from your computer (regularly, like a flash drive).
Other than that everything is good...recovery is for right hboot(since you already have cm11; official I suppose which is for 2.15)
Flash radio
Flash ROM -> choose full wipe during install
Never heard of recovery cache wipe so don't mess with that
Best of luck! :good:
Click to expand...
Click to collapse
Thank you! I will try and see where it leads me, if it fails I believe I can put back the cm11 right ? even with the new flashed radio.
As far as I know, there are no problems with cm11 and radios...but even if there is, you can always flash an older radio...but 1.20 is the recommended for our device in general.
Glad I could help :good:
Ok, so I try to flash the radio (before full wipe and rom flash) but it fails, I get the followings:
checking for MD5 file > no MD5 file found
verifying zip signature > failed
any ideas to where I went wrong?
LATER EDIT: scratch that, the problem was the 'ZIP signature files verification' box should have been unticked and thus no more md5 file required. --> radio flashed! now on 1.20. later I will try to flash the liberty rom. update afterwards
PS. found this in another thread:
"an md5 is not "added to a file", nor is it "a part of a file". An md5 is merely a hexadecimal readout of the contents of that file.
Here's how it works: A file is created, in our case it is a zip file. The creator or publisher of that file uses an md5 generator to generate the md5sum, which as I said before, is just a numerical readout (like a fingerprint) of the contents of that file. Now the end user has a tool to make sure that the file hasn't been compromised during a download or transfer. Using an md5 checker is a simple way to verify that the file is uncompromised. Input the md5 given by the publisher into an md5 checking app, then the app calculates the md5 of the file you've downloaded, if they match you know the file integrity is good."
Just installed the ROM, everything works fine, very fast and smooth, no WiFi problems, HOPEFULLY no radio problems (I previously had Venom Viper Sense5 and had major issues with radio and lots of random restarts).
ArcsONE said:
Just installed the ROM, everything works fine, very fast and smooth, no WiFi problems, HOPEFULLY no radio problems (I previously had Venom Viper Sense5 and had major issues with radio and lots of random restarts).
Click to expand...
Click to collapse
Glad to hear that.
I had also these random restarts, but they are gone now.
Enjoy
Still new here so can't post in the dev thread, but...
Installed the latest version (clean install), everything works solid. Hotspot works as before - have to turn it on, then reboot and Wi-Fi mostly works but occasionally needs restart to work. Other than that, everything is stable and quick, very happy with the ROM. As I primarily use 3G and don't rely on Wi-Fi as well as can use USB tethering instead of Wi-Fi hotspot, I'm not that annoyed by these issues.
However - on r107, I tried out the ElementalX 7.0 kernel as well but as I experienced issues with touch screen, I searched the thread and found a fix which turned out to be a special kernel. Therefore although the kernel in the ROM was updated and now there are no touch issues with the default kernel, the ElementalX kernel also needs updating. Really miss DT2W but a responsive touchscreen is more important to me.
Tried the kernel now after r111 install but the touch problem is still there so had to revert to default kernel.
I hope the kernel's developer sees this and can release an update :fingers-crossed:
no recent apps
I cant find the recent apps in this system
Problems
Hey guys, first post in this forum. I'm a total noob when it comes to rooting and roms and all this stuff, but if I didn't try it I would always be, so I tried this rom on my htc one s.
Several problems, I may have screwed up of course, I followed some tutorials, so I have this rom, but I am S-On, and my hboot is 2.15, I think that is what is causing me problems (SD card not recognized, meaning, no storage space, wifi problems, can't log in to google play).
But I can't get S-off, I've tried every single way, and something always goes wrong, I don't know what to do now, I think the solution would be to change to hboot 2.16, but I just can't do it, probably need to be S-off? No idea, would love to hear some feedback, I'll leave you with whatever it says on my bootloader.
TAMPERED
UNLOCKED
VLE PUT SHIP S-ON RL
HBOOT- 2.15.0000
RADIO - 1.15.50.05.29 (tried changing it, can't as well.)
OpenDSP - v31.1.0.45.0015
Plese help me guys, really don't know what to do, I think I might have accidentally deleted the stock Android.
Much thanks
Anyone else having problems with audio quality in calls? Any fix? I found liberty rom v2 on an italian forum, it says audio quality it's fixed in that, has anyone tried it?
VLE PVT SHIP S-OFF RL
CID - 11111111
HBOOT - 2.16.0000
RADIO - 1.20.50.05.16
OpenDSP-v33.1.0.545.1128
eMMC-boot
Can anyone help me get my WiFi working, I have updated my E8sw from a low 4.02 I think to the above flash. I did this as my phone was always getting confused and running the battery down quickly.
The selection of wifi is grayed out and I sometimes get the error no driver if I use an app to auto start the wifi.
I have security off and unlocked with Teamwin on the recovery side to select roms when flashing if that helps.
Can I just drop a file in somewhere ?
Hboot - 3.18.0.000
os 1.21.419.3
ukpaisley said:
Can anyone help me get my WiFi working, I have updated my E8sw from a low 4.02 I think to the above flash. I did this as my phone was always getting confused and running the battery down quickly.
The selection of wifi is grayed out and I sometimes get the error no driver if I use an app to auto start the wifi.
I have security off and unlocked with Teamwin on the recovery side to select roms when flashing if that helps.
Can I just drop a file in somewhere ?
Hboot - 3.18.0.000
os 1.21.419.3
Click to expand...
Click to collapse
Anyone ?
ukpaisley said:
Anyone ?
Click to expand...
Click to collapse
I think it would be better if you reinstall from the start with a RUU and then try flashing the S Team rom now, its working fine in my phone
I will try this. I think the main issue i have that the phone is htcm8sw .
Most of the original htc site flash do not seam to be available.
It's the updated kernel.. Flashing stock boot partition should restore the kernel.. But I doubt it will run with custom rom