I had one of the latest versions of miui and somehow lost recovery. I used Odin to flash my phone back to stock with recovery and root. When it finished and my phone restarted it would freeze at the Samsung logo. I installed a gingerbread rom which gave me access to recovery. So I wiped everything and installed Zeus. When the phone boots it force closes once and whenever I install an app. I am able to download it but once it finishes installing the screen goes black and restarts the launcher. Any suggestions?
What Odin did u used to stock I would say flash it with gtg stock rom and from there flash Zeus again.
Sent from my SAMSUNG-SGH-I997 using Tapatalk
I tried gtg also and it gave me the same result as the stock rom
Related
Ok I have a massive problem here. Last night I decided to use the 1 click universal root app to root my phone and flash it to get CM.
I downloaded the app did the root, downloaded clockworkmod then did a clockworkmod recovery. After that finished i was given a pre-root option to backup my phone and wipe data/storage.
I only chose back up my phone. My nexus one then rebooted and proceeded to backup my phone then it went to install CM 6 RC2.. After this had finished it then rebooted and went to the multicoloured animation where the colours ceom from the left and right..
Here it would continuously loop and never do anythign else. With this I pulled the battery and loaded into recovery where I was in ClockworkMod. I then proceeded to use the recovery and as it was doing the recovery it just froze and the progress bar nor any words would come up.
From here I pulled the battery again did a soft/hard reset but it would hang on the loading animation again. I then did a wipe data/clean option and now it just hangs on the X logo.
On my sdcard I still have the clockworkmod folder with the backup, nandroid, system and all the other files as well. Vodafone Australia have no stock of the Nexus One at all and won't be getting anymore in since it's a finished product
I barely have any cash for a new phone and need to know asap what to do to fix this problem! If anyone can help!
When you installed Cyanogen CM6 did you install the proper baseband also or you just didn't write it down for us? If you had 2.2 on the phone before you rooted the baseband is ok for CM6.
Did you try hooking your phone with USB and try if ADB interface works? If your computer sees the phone via fastboot?
IF fastboot works, you could always restore your stock recovery and install a stock FRF91. (And then try again with CM6, this time installing the proper baseband AND WIPING like you should when installing CM6!!)
When installing custom ROMs always read the install instructions whole first then install.
http://forum.cyanogenmod.com/topic/...y-crap-its-full-of-awesome-v600-rc2-07252010/
I did an update from 10b to 10d and tried booting into cwm recovery.
When the phone restarted, it just came up with a little animation (an android man in a box with loading bar) and my phone was reset to default.
How do I uninstall CWM and reinstall it? Am I right in thinking it's just a case of unrooting and re-rooting? Don't really want to do it and lose everything again.
download rom manager and go to the bottom tab on it and flash the 4.0.0.7 cwm and then go back to the top tab and reflash the 4.0.0.9 and then it should be all okay for you again take a matter of 2 mins if that
projectsome said:
I did an update from 10b to 10d and tried booting into cwm recovery.
When the phone restarted, it just came up with a little animation (an android man in a box with loading bar) and my phone was reset to default.
How do I uninstall CWM and reinstall it? Am I right in thinking it's just a case of unrooting and re-rooting? Don't really want to do it and lose everything again.
Click to expand...
Click to collapse
Hi,
A little note while using cwm, I have difficulty too in booting in cwm so what I'm doing is I'm using the reboot to recovery feature of cwm 4.0.0.9, from there I never had problems again in booting to cwm.
Sent from my unbricked O3D.
Hello, I'm new to the forums and I feel bad I'm already screwing things up :/
Anyway on to the problem... I've had CM9 running on my phone for about two weeks now but I wanted to get rid of the rainbows in CWM and at boot. Today I downloaded Rom Manager from the market place, and when I ran it, it prompted me to install CWM recovery to my SD card, although I already had it installed I thought I'd give it a try. Bad idea, now I can't leave recovery mode, my phone will continually reboot into recovery, I've tried wiping all data and clean installing CM9 again and still nothing. I've even tried the exitrecovery.zip script to no avail
Any suggestions or ideas on how to fix it and boot into my ROM again?
Thanks!!
I would venture to say you might have to reflash...or start over from stock...
i would reload stock....then reload ics or the rom of your choice...
Thanks a lot! Worked like a charm, I used Odin and flashed factory stock 2.2.1, now I'm off to getting ICS back.
Thanks again!
Does anyone know why this happens? I've noticed that anytime I open CWM and choose the boot to recovery option is when I get stuck with CWM Recovery looping. I then have to go back to stock and start over again.
I'm not entirely sure why it happens, my guess was that it puts up a bad flag not compatible with ICS that keeps it from booting that, that was why I tired the exitrecovery script, I looked through it and it appeared to me to change a flag for booting. I'm not sure why it happens but I'd say just use the reboot to recovery option that the ROM provides in the shutdown menu, I know that always works.
So, last night I was updating my phone to a newer version of Paranoid Android. In the process, I accidentally flashed TWRP over my preexisting flash of CWM and, in both being unfamiliar with TWRP, and an apparent conflict between the flashes, it soft bricked my phone. Most of my day has been spent recovering my phone.
I was able to restore my phone to stock using the excellent guide found here: http://forum.xda-developers.com/showthread.php?t=1840030
Then spent the next couple of hours installing updates, at which point I was eager to reflash my custom roms, etc.
Problem is, I can't get the phone to boot into CWM (or TWRP). Just goes to stock recovery. I've tried flashing the lazy way in ROM Manager, and in Odin (reads PASS), but it always goes to stock recovery. For that matter, in trying to flash with ROM Manager, it reads "an error occurred while trying to flash..."
Ideas?
TheBuzzard said:
So, last night I was updating my phone to a newer version of Paranoid Android. In the process, I accidentally flashed TWRP over my preexisting flash of CWM and, in both being unfamiliar with TWRP, and an apparent conflict between the flashes, it soft bricked my phone. Most of my day has been spent recovering my phone.
I was able to restore my phone to stock using the excellent guide found here: http://forum.xda-developers.com/showthread.php?t=1840030
Then spent the next couple of hours installing updates, at which point I was eager to reflash my custom roms, etc.
Problem is, I can't get the phone to boot into CWM (or TWRP). Just goes to stock recovery. I've tried flashing the lazy way in ROM Manager, and in Odin (reads PASS), but it always goes to stock recovery. For that matter, in trying to flash with ROM Manager, it reads "an error occurred while trying to flash..."
Ideas?
Click to expand...
Click to collapse
Do you want CWM or TWRP? If TWRP, you could just download GooManager from the Play Store and press Menu/Install Open Recovery Script.
For flashing either via Odin, deselect auto reboot in Odin then flash the recovery tar. Once its passed, pull the battery and boot directly into your custom recovery.
Sent from my SCH-I535 using Tapatalk 4 Beta
SlimSnoopOS said:
Do you want CWM or TWRP? If TWRP, you could just download GooManager from the Play Store and press Menu/Install Open Recovery Script.
For flashing either via Odin, deselect auto reboot in Odin then flash the recovery tar. Once its passed, pull the battery and boot directly into your custom recovery.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for the advice, but I got it working.
Tried Odin one more time, and it's booting into CWM properly now. Not sure why it didn't "take" the other 2-3 times that I followed the identical procedure, but it appears that my problems are fixed now.
Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Clear Cache
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
amotamatapia said:
Hi guys,
I have run into a problem when trying to revert my phone back to stock using odin. Here is the backstory. I was rooted running CM 10.2. Decided to try a 4.3 ROM. Flashed the new ROM successfully but noticed it was really janky when I was setting it up (clean install) and decided to flash my backup of CM 10.2. When flashing the backup, the flash only partially completed and booted into a non-functional version of my 10.2 ROM.
At this point I decided to use Odin and go back to completely stock. Ive used this a few months ago and it worked successfully. I used a tar.md5 of VRBLK3. Odin says "passed!" but when the phone tries to boot up, it gets to the verizon 4G animation and sits there cycling through that animation indefinitely.
I'm at a loss as to what to try next. Ive tried re-doing the odin flash with the same results. Thanks for any help!
Edit: Ive tried booting into the recovery and doing factory rest/wipe cache partition with no luck
Edit: Tried booted into recovery and it worked! I think im good from here.
Click to expand...
Click to collapse
athensjohn said:
I had something similar happen several months ago. I believe the solution for me was to boot into recovery and clear out the cache.
Click to expand...
Click to collapse
If you didn't get it fixed, pull battery, boot into recovery and factory reset. This will clear data and cache from previous installed ROM. Odin doesn't do this for you.
Sent from my SCH-I535 using Tapatalk