Long story, but here goes...
About a week ago I turned off my Droid. When I attempted to turn it back on it got stuck at the Motorola logo screen. After a few minutes it would reboot and do the same over and over. I had never rooted or done anything custom to the phone at any point. It was 100% stock original. Nothing had changed recently to suddenly cause an issue, no new apps or anything. I spoke with Verizon about it and they walked me through the process of attempting to boot to the recovery screen. During this call we found that I could not even boot to the recovery screen. I am outside of the warranty and inside of my renewal date.
Since I don't intend to pay for a new one I decided to try to fix it myself. My first attempt was simply to get to a point that I could boot to recovery. I flashed the phone with SPRecovery and sure enough I was able to boot to recovery. I then attempted to flash it with 2.2 and ended up back in the same situation with the boot loop. During all of this I noted that the Bootloader version was 2C.7C.
I then decided to go back to the SPRecovery/rooted configuration and attempted to load a custom ROM from Liquid. This also failed.
My next train of thought was to flash back to an older version of the Droid OS. I chose to flash to VZW_A855_ESD56_QSC6085BP_C_01.3E.01P_SW_UPDATE_03. Low and behold, that worked and the phone booted up and ran fine. It immediately updated to 2.1 update 1. I noticed after this flash that I was on Bootloader version 2C.6C.
Shortly afterwards I was prompted to install the OTA 2.2 update. After accepting and installing I was back to having a bricked phone. This was through the OTA update. Nothing I did or forced.
So basically, I can flash the phone back to VZW_A855_ESD56_QSC6085BP_C_01.3E.01P_SW_UPDATE_03 again and it works fine. But the second it tries to install the 2.2 OTA update or if I attempt to flash to the 2.2 image it gets stuck in the loop.
Notes that may be important:
1. I get the "E:Can't open /cache/recovery/command" error when I am able to get into recovery.
2. I have been sure to wipe data, cache, etc and formatted the SD Card through the phone OS when possible.
3. I use Ubuntu to flash the phone as it seems more stable and easier for my preference (I like Linux commands )
Any help would be greatly appreciated!!
I'm also stock in a bootloop, lost count already...
I have the Nexus S from Telus.
It was rooted, unlocked, running CM7. However I've been having issues with it freezing and decided I want to go back to the stock rom.
I ended up downloading what I thought was stock ROM for my phone (Stock GRH78 Nandroid Backup in this Tutorial http://forum.xda-developers.com/showthread.php?t=884093) however after it flashed my phone, I ended up with a phone which was essentially stuck in Airplane mode, would not connect to Telus. I'm guessing that it has the wrong radio for my phone/carrier?
So then I ended up finding a zip file someone posted Stock-GRJ22-i9020A-unsigned which should have worked, I ended up flashing the zip file from recovery.
It said it installed fine. Rebooted, and now the phone just cycles the Samsung Loading screen endlessly.
I tried to go back to recovery, and it gives me yellow triangle with !.
Is there any way to flash the recovery image back to the phone?
I plug the phone in and the PC won't recognize a device.
I installed the Android SDK
Ran the command adb devices, no devices attached to the PC.
I tried fastboot devices - blank
I don't know how I'll be able to get files back onto the phone SD Card for flashing etc...
I had the exact problem two days ago...flashed an image that jacked my phone up. Wouldn't boot past the google logo. Sat there indefinitely.
Read this thread and see if you can get it work. In a nutshell, you need the PDA net drivers installed. Since PDA net can't install the app on your phone (because it's not booted into an OS) leave the install program in limbo and voila, fast boot will work. From there, push the recovery.img (google Clockworkmod recovery image), boot into recovery and you are off to the races.
This is, of course, assuming you already have a ROM image on your internal SD card you can flash to get back up and running. I'm not sure how to install a .zip image ROM if you can't gain access to your SD card.
http://forum.xda-developers.com/showthread.php?t=1303522
Good luck, I know the feeling. It blows.
Ah, just found out how to install a file on a phone that won't boot.
You do need to flash CWM recovery first though.
http://forum.xda-developers.com/showpost.php?p=18437305&postcount=2
Good news! I tried a factory reset/data wipe and rebooted the phone.
It doesn't hang anymore, all functions restored and the phone is working on Telus again!
I guess I had to format data, clear cache, before the flash of the rom.
So relieved.
Issue has been solved!
Hello, I'm new to the forums and I feel bad I'm already screwing things up :/
Anyway on to the problem... I've had CM9 running on my phone for about two weeks now but I wanted to get rid of the rainbows in CWM and at boot. Today I downloaded Rom Manager from the market place, and when I ran it, it prompted me to install CWM recovery to my SD card, although I already had it installed I thought I'd give it a try. Bad idea, now I can't leave recovery mode, my phone will continually reboot into recovery, I've tried wiping all data and clean installing CM9 again and still nothing. I've even tried the exitrecovery.zip script to no avail
Any suggestions or ideas on how to fix it and boot into my ROM again?
Thanks!!
I would venture to say you might have to reflash...or start over from stock...
i would reload stock....then reload ics or the rom of your choice...
Thanks a lot! Worked like a charm, I used Odin and flashed factory stock 2.2.1, now I'm off to getting ICS back.
Thanks again!
Does anyone know why this happens? I've noticed that anytime I open CWM and choose the boot to recovery option is when I get stuck with CWM Recovery looping. I then have to go back to stock and start over again.
I'm not entirely sure why it happens, my guess was that it puts up a bad flag not compatible with ICS that keeps it from booting that, that was why I tired the exitrecovery script, I looked through it and it appeared to me to change a flag for booting. I'm not sure why it happens but I'd say just use the reboot to recovery option that the ROM provides in the shutdown menu, I know that always works.
Using ROM Manager and the latest version of CWM I tried installing today's (12-08) nightly build of CM11 to try it out. After doing a complete backup and then wipe data/cache the install failed. I'm not sure why but it said it was aborted and to check log and report the error to ROM Manager.
After that it asked if I wanted to reboot and I wanted to make sure I restored from my backup so I backed out of the screen but then it booted up on its own. It did not get past the S3 loading screen with the CM Android/alien guy it just turned off, back to that screen again and then back into recovery.
At this point I went to recover from my backup file and it said MD5 mismatch and won't load. I've since tried wiping data/cache/dalvik cache all manually and then boot up, or wipe everything and try to install the rom again... every time it just loops back to recovery mode. The last time I tried installing the rom again it told me I might have lost root access and asked if I wanted to repair it... I'm not sure what that means.
Any suggestions? I am lost at this point. I have no experience with ADB (I'm not sure if that's my only option) but I've used ODIN mode a few times. Easiest solution would be best.
bejahu said:
Using ROM Manager and the latest version of CWM I tried installing today's (12-08) nightly build of CM11 to try it out. After doing a complete backup and then wipe data/cache the install failed. I'm not sure why but it said it was aborted and to check log and report the error to ROM Manager.
After that it asked if I wanted to reboot and I wanted to make sure I restored from my backup so I backed out of the screen but then it booted up on its own. It did not get past the S3 loading screen with the CM Android/alien guy it just turned off, back to that screen again and then back into recovery.
At this point I went to recover from my backup file and it said MD5 mismatch and won't load. I've since tried wiping data/cache/dalvik cache all manually and then boot up, or wipe everything and try to install the rom again... every time it just loops back to recovery mode. The last time I tried installing the rom again it told me I might have lost root access and asked if I wanted to repair it... I'm not sure what that means.
Any suggestions? I am lost at this point. I have no experience with ADB (I'm not sure if that's my only option) but I've used ODIN mode a few times. Easiest solution would be best.
Click to expand...
Click to collapse
I had the exact same issue when trying to flash that same CM11 nightly build but with TWRP...
I just pulled the battery took my SD card out and reinserted it and I just kept booting into recovery and turning the phone off until it let me reflash a rom or backup. Obviously this isnt the most legitimate solution but that could work for you! It did for me!...
This could have been caused by needing an update of CWM or TWRP to better support 4.4 perhaps?
Badouken said:
I had the exact same issue when trying to flash that same CM11 nightly build but with TWRP...
I just pulled the battery took my SD card out and reinserted it and I just kept booting into recovery and turning the phone off until it let me reflash a rom or backup. Obviously this isnt the most legitimate solution but that could work for you! It did for me!...
This could have been caused by needing an update of CWM or TWRP to better support 4.4 perhaps?
Click to expand...
Click to collapse
I tried that to no avail. I unfortunately had to revert to stock unrooted via ODIN mode and it got me to boot back up. I can just reroot now. Luckily I made a backup with Titanium and uploaded it to my Google Drive.
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)