Hi guys!
Yesterday I successfully rooted my NS (it is a European SLCD model with stock 2.3.6 on it) following the newest guide on nexusshacks.com. So I ended up with TWRP recovery.
Then I thought the easiest to install CM is via Rom Manager. Therefore I had to change recovery for CWM. (I flashed the latest one.)
And here comes my question: why am I unable to flash CM?
First I tried it in Rom Manager, after wiping everything and rebooting system nothing happens, except for a big yellow exclamation mark.
Then I downloaded the proper CM myself and I tried to do the whole process manually in recovery menu. After wiping and choosing update from SD card I get a message like the process is aborted.
I also tried with an older CWM and with other ROM.
Any suggestions?
Thanks a lot
Sent from my Nexus S using XDA App
Boot into bootloader, then flash recovery via fastboot.
fastboot flash recovery recovery.img
stock firmware will rewrite your recovery after each boot. flash recovery then flash this right after.
Follow what SEAN SAys..............He is a Master in all these , and he helped me with details to root, flash cwm, make it sticky and flash custom ROMS.
It took me 5 minutes to do all those , and Now I am switching Roms like I switch my underwears every day twice.
I must say, Sean has the best possible way which is like a finger click.
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
ttakacs said:
After months of flashing everything in sight on my NS4g, the device appears to have rolled over and died! It started a few days ago, when it rebooted and asked me for a password to decrypt from storage (no password has ever been set). I couldn't get past that screen, so I decided to boot into recovery (TWRP), reinstall ROM (CM10) and gapps and restore data from backup.
No go. It just kept rebooting into recovery. But I was able to connect the phone to the PC and copy files from the phone but could not copy or delete files on the phone from the PC.
I used fastboot, Odin, and one-click-stock to wipe the device and install factory images, but the phone would boot no further than the red triangle-dead android.
Is my phone dead? I searched the forums and couldn't find any solutions other than to do what I have already done.
Click to expand...
Click to collapse
When you flashed to stock you erased your recovery.. Reconnect to your computer and push a recovery onto your phone and you're good to go..
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
ttakacs said:
Unfortunately, when I flashed TWRP and boot.img to the phone using fastboot and attempted to boot into recovery, bootloader reports "No Boot or Recovery Img."
Click to expand...
Click to collapse
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Setting.Out said:
Try the Nexus tool kit and from the bootloader (power and vol. up) select flash to stock (bricked) then in advanced boot temporary recovery to flash the recovery of your choice.. or push a boot image.
Click to expand...
Click to collapse
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
ttakacs said:
Wish I had better news but ... using the Nexus tool kit I was able to boot into TWRP but when trying to flash CM10 and gapps for this phone the flash failed; likewise, I could not flash CM10 and gapps by pushing the files from the PC to the phone. I first did flash to stock (bricked) but that brought me back to the red triangle, dead android.
I am beginning to suspect that the phone internal sdcard is corrupted ... is there a way to test for that?
Click to expand...
Click to collapse
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Setting.Out said:
When you got it to flash to stock did it boot up fully?
Remember that flashing to stock removes custom recoveries and you will need to flash one
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
ttakacs said:
No, the phone never did boot up fully. It got to the Google screen with the unlock icon and then to the red triangle, dead Android.
Click to expand...
Click to collapse
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Setting.Out said:
This happened when you tried stock or custom?..
Did it fully boot on stock image?..
The dead android usually shows up when you attempt to boot into recovery and you don't have one... If you try to boot and you loop back to the dead android it usually means you don't have a rom...
Try again to flash to stock, use the toolkit to boot a temporary recovery and flash a custom recovery.. Then make sure you are flashing the correct rom and correct gapps for that rom and for your phone.
Click to expand...
Click to collapse
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
ttakacs said:
I know have a recovery because the tool kit booted into TWRP; furthermore, the tool kit installed a TWRP 2.3 image (prior to installing the tool kit I was on 2.5 so the tool kit did something). From there, I tried to flash CM10 and gapps in the sdcard/download folder, but that failed, with TWRP returning message similar to "error opening ZIP".
I have used Odin to flash the stock image and it did not fully boot, ending at the dead android. Same results for flashing the stock image using fastboot with the phone connected to the PC. Same results with using the Nexus tool kit to flash a stock image (first JB and then, when that didn't boot, ICS). And, after the toolkit booted into temporary recovery (TWRP), I tried to flash (in this order) CM10 plus gapps, JB stock, and ICS, each time with the same results (no full boot, dead android).
I am with you when you say that the dead android means there is no rom, because my efforts to flash any rom, whether stock or custom, don't do anything. To all appearance, the phone contains a bootloader and a recovery and nothing else.
Thanks for your persistence ... any ideas for something else to try?
Click to expand...
Click to collapse
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Sent from my Nexus S using xda premium
Setting.Out said:
I'm at a loss.. Try again, maybe there's something missing.. And flash only one at a time and see if it worked (just ROM then reboot) then wipe d+c and flash gapps reboot then wipe flash... Ect... Ect...
Click to expand...
Click to collapse
I am too. Every method known to me (Odin, fastboot, adb) to flash a ROM, whether custom or stock, has failed to boot. Thanks for hanging with me on this; if you can think of solution I'll be glad to have it. Or if I solve it, I'll post here.
So I've been play with Android for a few years now and I love it. Got the Samsung Galaxy Note 10.1 in the fall of 2012 and had a custom rom installed not long after. Periodically I check XDA to see if there is a new custom ROM I want to try. Finally there is, OMNIRom. It says I need a recovery image that can handle the new SELinux. After poking around for an easy way to update I findout that the goo.im has a new recovery that it will install. And that's where things go south. I installed the new TWRP v2.6.3.0 via the goo.im and then reboot into the recovery. I go to flash the new ROM and it fails. I try downloading the ROM again and flashing it. It fails again. Okay, shouldn't be a problem... I'll just flash my prior rom. It too fails. Uh-oh.... If I try to boot normally, it just loads directly to the faulty TWRP. If I try to boot to the bootloader so I can use Heimdall to flash over a new recovery, it boots to TWRP....
I found a new recovery in a ZIP format finally and tried to use that, but it fails too.
Any advice? Suggestions? Please help.
Have a Verizon Samsung Galaxy Note II (SCH-i605). Took the latest OTA update to VRUEMJ9. Have since rooted and installed SafeStrap and was happily running N3BULA ROM, when I decided to explore a bit and tried to flash Alliance ROM. Now I'm stuck on the Samsung boot screen and can go no further. I am able to access Android system recovery, but when I try to 'apply update from external storage' I get 'E:signature verication failed' message. Tried to flash to stock via Odin, but unsuccessful. Shows Added in Odin but nothing happens when I select the .pit file or the .tar file. This is a work issued phone, so any help to get up and running would be greatly appreciated!
Brantosapien said:
Have a Verizon Samsung Galaxy Note II (SCH-i605). Took the latest OTA update to VRUEMJ9. Have since rooted and installed SafeStrap and was happily running N3BULA ROM, when I decided to explore a bit and tried to flash Alliance ROM. Now I'm stuck on the Samsung boot screen and can go no further. I am able to access Android system recovery, but when I try to 'apply update from external storage' I get 'E:signature verication failed' message. Tried to flash to stock via Odin, but unsuccessful. Shows Added in Odin but nothing happens when I select the .pit file or the .tar file. This is a work issued phone, so any help to get up and running would be greatly appreciated!
Click to expand...
Click to collapse
Have you performed a "wipe data" option from the recovery after flashing the alliance ROM (it wipes your user data)?
Because I just visited the alliance ROM thread ( http://forum.xda-developers.com/showthread.php?t=2032447 and in the install instructions its mentioned so.
Better take a little time and properly read the install instructions during flashing..
Sent from my GT-I9070 using Tapatalk
dagger said:
Have you performed a "wipe data" option from the recovery after flashing the alliance ROM (it wipes your user data)?
Because I just visited the alliance ROM thread ( http://forum.xda-developers.com/showthread.php?t=2032447 and in the install instructions its mentioned so.
Better take a little time and properly read the install instructions during flashing..
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I never had that option. I've flashed numerous ROMS before and am pretty meticulous when it comes to following instructions. It appeared to have a custom flash script which allowed me to pick what I did and didn't want to install. I tried to keep it mostly stock and when it completed, it automatically rebooted (didn't give me an option to 'wipe data') and now leaves me stuck on the Samsung Boot Screen. I was able to flash the .pit file via Odin, but keep getting a 'MD5 hash value is invalid' when I try to flash the .tar file.
Brantosapien said:
I never had that option. I've flashed numerous ROMS before and am pretty meticulous when it comes to following instructions. It appeared to have a custom flash script which allowed me to pick what I did and didn't want to install. I tried to keep it mostly stock and when it completed, it automatically rebooted (didn't give me an option to 'wipe data') and now leaves me stuck on the Samsung Boot Screen. I was able to flash the .pit file via Odin, but keep getting a 'MD5 hash value is invalid' when I try to flash the .tar file.
Click to expand...
Click to collapse
You should enter into recovery and then manually wipe data..
Also if that thing doesnt work, then have a look at this thread which explains how to go back to stock rom..
In addition,
A. Why doesnt Odin work?
Did you unextract the tar and pit from the rar/zip so that odin could recognize the files as suggested in dagger's link in section 1b step 2?
Did you install samsung drivers on your computer properly? You may use this toolkit for that
B. Rescue by CWM
Signature verification failed is caused (I think) by stock samsung recovery's choosiness, if you are sure you downloaded the zip correctly. What zip did you exactly try to flash?
So now, you may want to flash a cwm recovery or a kernel that contains cwm inside. Flashing usually uses adb using fastboot. Search "flashing a recovery image" or "flashing a kernel" where your chosen kernel should have cwm inside. cwm usually does not put out that signature verification error.
Remember:
You can access recovery mode through an app or by pressing a button combo when turning your phone on. Device specific.
Stock samsung recovery can wipe data.
CWM can also wipe data, and is the preferred installation method for most/all custom roms. And it can make a nandroid backup.
If ever you do choose to flash, you'll need the toolkit to install adb/fastboot drivers, but maybe since yours in locked bootloader the adb thing might not work.
Hope this helps
I was installing TWRP via ODIN 3.10.7. I rebooted my phone, went into the recovery only to find that TWRP was not installed and I was in the default recovery. I selected "Reboot" and now all i get is a repeating Note5 logo. Does anyone know how I can fix this? Thanks for any & all replies.
Edit: I was following this guide: http://forum.xda-developers.com/tmo...easy-steps-n920t-aoge-odin-twrp-root-t3187422
Kaveri said:
I was installing TWRP via ODIN 3.10.7. I rebooted my phone, went into the recovery only to find that TWRP was not installed and I was in the default recovery. I selected "Reboot" and now all i get is a repeating Note5 logo. Does anyone know how I can fix this? Thanks for any & all replies.
Edit: I was following this guide: http://forum.xda-developers.com/tmo...easy-steps-n920t-aoge-odin-twrp-root-t3187422
Click to expand...
Click to collapse
Search around that thread. I had the same issue as well as many others. You can flash TWRP in Odin by extracting the Tar from the zip (on your computer).
However, (as of yesterday at least) people are still experiencing frequent reboots - likely kernel related. Personally, I went back to unrooted stock for the time being. You can also check the other development thread (in development section).
Sent from my SM-N920T using Tapatalk
Go into download mode and reflash the team win recovery. The stock recovery reinstalled before I could install supersu. So I had to odin flash it twice.
Worse comes to worse Odin to stock and start the root process over.