Related
Does anyone know of a resolution to the device going to sleep after a specified time and not re-waking? I tried the Backlight setting and Power setting, but the device seems to go to sleep and not wake up. I have to soft-reset it get it to respond and even phone calls go straight to voice mail.
any help is much appreciated
I had the same problem. It's so random that it's hard to find out a reason
feareddevil said:
Does anyone know of a resolution to the device going to sleep after a specified time and not re-waking? I tried the Backlight setting and Power setting, but the device seems to go to sleep and not wake up. I have to soft-reset it get it to respond and even phone calls go straight to voice mail.
Click to expand...
Click to collapse
What ROM are you running? What radio and ipl/spl do you have? I have to say I've never seen this on any of the WM6 roms I've been on (MBE, mUn, nottoosmart, faria, xplore). I wonder if its some 3rd party app thats misbehaving / conflicting with WM6? Are you running any Spb programs (a couple of those seem to have issues with WM6 in other ways).
Not sure how often it happens, but if possible you should go back to a clean flash of the rom and try using it just that way to see if the problem still happens.
3DES.2 ROM
SoftBank X01HT
Cingular Network
ROM: 3.23.0.2
Radio:1.38.30.10
OS:5.2.968 (B 17736.0.2.0)
Protocol:32.71.7020.12H
HERM200
I am concerned about reflashing, since I already bricked a device trying to roll back to an original rom (and I did read wiki) Any help is greatly appreciated. I boot fresh and do nothing but press the power button to turn off the screen and it happens everytime, the greenlight still blinks but nothing happens.
feareddevil said:
HERM200
Click to expand...
Click to collapse
Well, keep reading this forum and you will probably brick it again! You do realize you are reading the Wizard forum and not the Hermes forum???
If I set the minimum cpu speed to 130mhz or below I get the exact same problem, Are you using battery status or some other omap scalar program?
uugg-- sorry guys, I read the Hermes forum, but clicked the wrong link when I was mobile and posted the first message.
I am not sure if I am running a slower mhz. Is that default on 3DES.2? I will research how to change but if you can tell me quickluy - I will gladely take instructions to test.
The only way to change the speed is if you are running something like BatteryStatus or OMAPCLOCKplus or XCPUSCALER. Those will allow you to set a "min" on your phone and will drop your CPU down to the min when you aren't doing anything. So if the min is set to low, you phone can lock up similar to what you are describing.
You'll have to find out from other Hermes users what a good min is for your device. Personally on my Wizard I set the Min to 143 or 147Mhz. It can go lower, but I don't think it makes that much difference and don't care to find the bottom that works before I have problems. Just like I run a max of 260Mhz. I know I can run 273, but I don't see much difference, and really don't want to have issues by running faster when I can't see a performance gain (but thats just me).
Good luck!
Thank you everyone. I have narrowed it down to the powersave.dll. When I disable this - it no longer causes the lockup issues. I did not try adjusting the min value but it does appear to be the issue as I will assume - that powersave option does exactly as you outlined above.
regards and thanks again.
This is a common problem if you have installed a "Today" application on a storage card (the microSD card). If you did this, reinstall to the main memroy any Today application or any application that is in the "'windows\startup" folder.
I've become increasingly irritated by something I have found in all WM6 ROMs that I have installed. I saw it in the PEE, EA and now VJs. Once every 5 or 6 calls, I will see the phone number come up on the display (phone is locked). I hit the soft left key to answer. The phone seems to think for a second or so, but never answers the call. The call gets dropped, and I see the missed call icon on the top bar. The same thing happens if instead of hitting the soft left key I hit the green phone key. I have to then unlock the phone, clear the missed call status, and call the person back. It's very annoying.
Does anyone else also see this? Is there a way around it? Or something that needs to be added/deleted?
Help!
Did you update the radio ROM ?
karhoe said:
Did you update the radio ROM ?
Click to expand...
Click to collapse
Yes sir. To the latest one found in Nitro's signature.
I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
When you have it set to vibrate and ring please look at and post the contents of the following registry key:
HKCU\ControlPanel\Sounds\RingTone0
list all values and data
thx
Also make sure you understand the expected behavior:
Vibrate AND ring will mean it will play the ringtone and vibrate all through the ring tone.
Vibrate THEN ring will mean it will vibrate once for a few seconds then play the ringtone.
Which one have you selected and explain what you think it is doing that is not normal....
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
ithehappy said:
I am using Dutty's 6.1 hybrid Rom. But a major problem is with the vibration. I have selected Vibrate and ring and then the phone vibrates continiously with the ringtone. When it was with the Stock rom the phone didn't vibrate constantly. This is eating a lots of battery ...Pls pls find some way to STOP this.
BTW- Pls don't say that i have to select vibrate then ring option.
Click to expand...
Click to collapse
Hi,
Maybe this can help:
check reg: HCU - ControlPanel - sounds - RingTone0 - Script
a = activate
V = Vibrate
P = play sound
w= wait
r= repeat
maybe you have something like: avr
You should have something like: av2pw2r
This way you tell the device to activate, then vibrate, then play ringtone, then wait for 2 seconds, the repeat the instruction...
cheers
liquidfork said:
I think he may be talking about its a constant vibrate rather than a pulsing vibrate, mine does the same thing. I'll get those values here in a minute.
Click to expand...
Click to collapse
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
ryncppr said:
Well let me tell you something...If you can figure out what is causing it and make it an option, I think HTC will get a whole new fan base of twenty something women!!!
I can see the ad now.... "Hey Ladies, HTC Tilt, not only looks good, but feels great in your pocket!!!!!"
Click to expand...
Click to collapse
LOL
My script shows av0pw3r.
defp said:
My kaiser sometimes won't stop vibrating after receiving an email(not on sms).
This started to happen after installing no thrills. When i press the power button until the dialog to shutdown appears, and press no the vibrations stop. The only real annoyance is when there is an email in the middle of the night.
Click to expand...
Click to collapse
I get this too, but it doesn't happen with every email. I find just hitting the start button stops it, but if I'm not near the phone, it's really annoying and drains the battery.
I'm using Dutty's 19209 rom. Any ideas?
liquidfork said:
LOL
My script shows av0pw3r.
Click to expand...
Click to collapse
That means:
Vibrate(v) continuously(0) and play ringtone(p) for 3 seconds (w3) then repeat(r).
If you don't want continuous vibration, use something like:
av3pw3r
Vibrate(v) 3 seconds (3) and play ringtone(p) for 5 seconds (w5) then repeat(r).
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
rzanology said:
well then....seems as if i have passed on my little problem to you fine people. i've been complain of this for months now. I have hunted dutty down for many hours to fix this but no luck. from what i can tell the issue has to do with sound.
if you notice it only happens when the phone is promoted to play sound...phone call....text...or email. Sometimes (depending on the radio) if you let it sit for a few seconds (we're talking 40 seconds or so) you'll notice the last half secants of the sound will play, then the vibration will stop. Other times or most of the time, the last bit of the sound does not play, so the phone continues to vibrate.
to tell the truth i've been way to lazy to find out what it is that stops he last bit of sound from playing, but trust me when i tell youz...thats the issue.
my quick fix is to FORCE it to play sound. How? just hit the red phone button. That little beep it makes is all you need. once you hit the end button the vibrating is done. it hasn't happen too many times with the newer builds...but it still happens. its a bug i just accepted.
Click to expand...
Click to collapse
Thank goodness I'm not alone! I've been having this problem on & off for the last 3 months!. And yes your right rzanology its almost like the phone turns off before the end of the alert which trips it out....
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
rzanology said:
dont worry. i wish this bull sht on all of you! and i am confident you will all run into it sometime
but really...it has been alot better with the new builds. im about to call up att and tell them my phone keeps freezing and its affecting business lol...see if they will send me a brand new one.
Click to expand...
Click to collapse
You sure you GF didn't purposely sabotage you device...buzzzzzzz, ohh baby! ;Dirty_Old_Man_Smiley)
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Solved
ithehappy said:
this bug can be remove by the rom builder. so i am requesting mr.dutty to solve this problem. hope you understood what we are saying. we just need pulse vibration rather than the constant vibration like the original htc rom.
Thanks.
Click to expand...
Click to collapse
Hi,
Did the solution proposed in post #10 work?
Rafael K said:
Hi,
Did the solution proposed in post #10 work?
Click to expand...
Click to collapse
Sorry buddy i don't want to go to reg editor for a simple thing.
Simple straight answer - much to ask for?
ithehappy said:
Sorry buddy i don't want to go to reg editor for a simple thing.
Click to expand...
Click to collapse
If you haven't applied the reg hack, the question clearly was not directed to you. So let me put that again: Can someone who applied the reg hack in post #10 and is not trying to play the smart### confirm to me if it works on his/her device?
In the meantime: I have tried and put av1pw3r (meaning, according to post #10, that the vibration would last 1 second). I sofreset immediately after and confirmed that the hack sticked.
But got the continuous vibration at least once after that. I'm on Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 with the cube.
I have learnt from experience that I could make the vibration stop if I started a call...
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
redmercury said:
I had this problem when I flashed a ROM and kept the older radio to see how it would work. When I updated the radio it went away. Try changing radios it might work for you.
Click to expand...
Click to collapse
Hm, nice idea, will try it out
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just have to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
Click to expand...
Click to collapse
Tweaks enough around
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
Click to expand...
Click to collapse
I don't have that problem?
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
never had that either
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
Click to expand...
Click to collapse
try this solution
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
Click to expand...
Click to collapse
Did you try a different alarm already?
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
Click to expand...
Click to collapse
Don't have that problem
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Now you mention it, yes, that is annoying... Would love to see a tweak for that as well!!
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just has to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
A lot of these problems though, are mentioned throughout this forum, and can be solved. Either by ROM updating, or tweaks... What Rom are you running?
I understand completely. I feel differently though. My TP is the best phone ever. The issues I have were seen on my previous devices (HTC devices for the US). The faster processor, increased storage, and TF3D make me happy. Don't get me wrong, I have cussed at this phone, missed inportant business calls, and missed a flight thanks to the alarm. I soft reset 1 - 5 times a day to proactively minimize these issues. But overall, the TP is a huge improvement over my Wing. So long as my new devices are improvements to the one before, I am happy. I can't live with a standard cell phone, and love my Raphael.
joeltje said:
I don't have that problem?
Click to expand...
Click to collapse
Try calling your phone from a land line phone.. how long does it take before your cell actually start ringing?
joeltje said:
Did you try a different alarm already?
Click to expand...
Click to collapse
Yes, but it happens so rarely I can't say if its the sound. Besides, it's the rooster sound that came with phone. No matter what it should never happen. It happened on my TYTN II too.. So I guess it's probably a windows thing.
joeltje said:
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
Click to expand...
Click to collapse
Hmm.. I might try that.. but I often see people start having entirely different problems with their phone then (lock ups and strange behaviour). If there is a stable ROM that fixes these issues and doesn't break down hard once every week. I'm all for it!
I'm running the standard ROM that came with the phone. Ver.: 1.90.403.6 DAN (Danish) ROM date 08/23/08, Radio: 1.02.25.19, Protocol: 52.33.25.17U
If I call my cellnr. from the home phone, it starts ringning as quickly as all my other mobile phones... So no, I really don't have that problem, thoughj I did just see another topic from somebody with exactly you problem: http://forum.xda-developers.com/showthread.php?t=432415
You might want to follow that.
On the alarm, I have 2 kids, so I don't use an electrical alarm Sorry...
The different ROM may be something you can test at least. It fixed a lot of annoyances for me anyway. Look in the Wiki for different Custom Roms, there are a couple out there, and for me, DCS worked best. You can always go back to original, should you not like the ROM. I'm running DCS now for three days, no resets, and it is still fast....
ssndk said:
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
The issue above really annoying. Normally that will cause my TP to go mute and can't hear each other. Have to soft reset. This issue is discuss in another thread here. Since I'm overseas for at the moment, can't go complain to my vendor.
ssndk said:
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
joeltje said:
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
Click to expand...
Click to collapse
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
you can extract the stylus but the you have to juggle around with it OR you can press the standby button on top to unlock it. It's a pain I know but the problem is that it is a touch screen so pressing a button to unlock is less worse than without it.
So functionality actually remains as it is now... That's good, I'll give it a try!
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
It unlocks when the stylus is extracted..
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
ssndk said:
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
Click to expand...
Click to collapse
Try SensorLock. It's a great little utility that unfortunately has stopped working for me. Must be something I poked somewhere. lol
As for the alarm, mine works fine... but I do notice the ringing a couple of times on the sending end before the phone starts to ring. I'd sort of passed that off to a network thing, not a phone thing.
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Quote:
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
TRY G-Alarm. It works well for me.
Klaxon (sp?) alarm looked cool and would have also been practical, but it would crash - totally unreliable.
[email protected] said:
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
Click to expand...
Click to collapse
No, in my TPro the delay is exactly the same (oviously using the same mp3 file in memory card or in the device)..i've reduced delay sound installing Diamond tweaks and setting "without delay" in ring tone..then i've erased diamong tweaks because use too much battery now i have only 1 ring with light (and identified call incoming on the screen) and without sound, and BEFORE the second ring my device correctly sound
bugsykoosh said:
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Click to expand...
Click to collapse
If your referring to this one,
108-Allow users to disable the 3 seconds delay between rings in devices with Windows Mobile Phone Edition
Click to expand...
Click to collapse
see the following thread at PPCGeeks.
If your talking about the fact that the NAV wheel starts flashing 5 seconds before the audio starts playing, then it's not the same scenario.
ssndk said:
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Click to expand...
Click to collapse
I have a HTC TouchPro and had the same issue of not wanting to press the long press end key for 5 seconds to lock the phone. I tried the code you gave and unfortunately the phone still does not lock when I push short press the power button to turn off the back light and put th phone in sleep mode. I really want this to work since when I am driving, I think when I go through good and bad coverage areas, the phone will automaticallly wake up about 3 times each way, so if it is not locked, I can accidentally call people while driving.
any suggestions? ive already turned vibrate off on the keyboard and that fixed alot of the issues with the phone.
I know it's not a standard option. Whether or not it can be achieved with root access, maybe someone else can answer.
seems to have been added with the 156 update.... if you find out please let us all know. maybe with the kernel out it can be addressed
Ive been wondering the same thing.
im amazed that this isnt an option already. that vibrate function slows the phone phone down bad!
I was going to get rid of my phone for this reason and the keypad choppiness
This would be so big if someone can come up with a way to disable this...
i dont think you can without modifying the dialer
boosted125 said:
i dont think you can without modifying the dialer
Click to expand...
Click to collapse
That doesn't turn of the vibrate for the initial time you open up the phone and dial a number.