CM9 (ICS) is in alpha stage now. If you can help or know of anyone who can assist, please visit:
http://androidforums.com/triumph-all-things-root/488824-dev-continuing-triumph-ics-development.html
Good Work!
Ive followed the link to the discussion thread. I can tell that you all over there are making great headway in your pursuit of ICS. Keep it up guys!
Looks like an alpha release is possibly a couple days away! . Thanks to yumbrad for getting wifi and 3g data working
Sent from my Transformer Prime TF201 using xda premium
Alpha is out!
Sent From My Motorola Triumph Cm9
Whyzor said:
CM9 (ICS) is in alpha stage now. If you can help or know of anyone who can assist, please visit:
http://androidforums.com/triumph-all-things-root/488824-dev-continuing-triumph-ics-development.html
Click to expand...
Click to collapse
did u try use HD2 ICS ROM and Drivers with? cuz HD2 have 1GHz Scorpion processor, Adreno 205 GPU, Qualcomm MSM8655 Snapdragon as MT does
guys check out ideos x6 its the same phone exact same to triumph but only one diff that is triumph is cdma and ideos x6 is a gsm device ... check it out guys alpha 3 out for it thanks to edowar ..
Related
Hello all,
i'm trying to port or install the MIUI rom for Optimus 3D. I've tried some things, but i don't know how start.
Somebody can help me or tell if the port will be avaible some day?
(I'm trying to install 2.3 MIUI without 3D support) OMAp4 compatible ROM and port it.
The official miui webs for more info: www.miui.com www.miuiandroid.com
Best regards
Well MIUI is based on CM7 and we know that aremcee has got it running on O3D so in theory it should be possible, but I don't know of any other OMAP4 phones to port it from, which would probably mean building it from scratch which would be really hard to do...
Unless there is another phone with similar hardware running it, then you could pull bits from CM7 to try to get it running, but that would mean getting CM7 for the O3D and I don't think aremcee will release it until its running properly with all the 3D bits working
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
alvyweb said:
Hello all,
i'm trying to port or install the MIUI rom for Optimus 3D. I've tried some things, but i don't know how start.
Somebody can help me or tell if the port will be avaible some day?
(I'm trying to install 2.3 MIUI without 3D support) OMAp4 compatible ROM and port it.
The official miui webs for more info: www.miui.com www.miuiandroid.com
Best regards
Click to expand...
Click to collapse
It is really a hard job dude. We should wait for CM7 at first.
It will not support 3d currently i guessed.
Sent from my LG-P920 using XDA App
guys cm7 is out (alpha) well now hope that the problems are getting killed, and i think after that miui will be available for our phones so again we have to wait
Hello guys... Today I've installed ICS and Honeycomb (3.2) AVDs on my PC first time... But ICS works very slow and Honeycomb works slower... And I can"t start learning Android development with this AVDs... Can you help me to fix this problem?
Little info about my PC:
RAM - 3GB
CPU - Intel Pentium dual core 1.8GH
OS - Windows 7 ultimate 32b
And my AVDs have 1GB virtual RAM
My avds aren't ics or honeycomb as most phones still use gb but have you tried making a gb version to see if it is specific to all android avds or just to the two you have already?
Dave
Sent from my LG P920 using Tapatalk
I know that most phones use GB, but since I just started to learn, I think that when I'll be ready to do something, than all phones will use ICS or even higher D
But soon I'll try to install GB... Thanks...
miosine said:
I know that most phones use GB, but since I just started to learn, I think that when I'll be ready to do something, than all phones will use ICS or even higher D
But soon I'll try to install GB... Thanks...
Click to expand...
Click to collapse
I was just meaning that if a gb one works fine you at least know its not all avds that have a problem.
If all do it then try lowering the virtual ram to 512mb and see if that helps.
Dave
Sent from my LG P920 using Tapatalk
Please use the Q&A Forum for questions Thanks
Moving to Q&A
OK, thanks, I'm sorry...
i was looking at the optimus 2x's android dev section and i saw a hell lot of roms especially based on cm9, this must mean they do have ICS working on their phone, which means an ICS comaptible kernel, since both house the same TEGRA 2 processor, i was thinking if our wonderful devs could just port it to galaxy R, it would greatly reduce the effort of building one from scratch, and if it isnt possible then please do tell me why, cause we can all learn and maybe help out 1 way or the other ?
I'm especially bad with kernels , not to mention port them . But if the other devs port them they might just be able to boot my ICS .
This was sent from a Galaxy Ace. Problem?
So, you say Porting is possible??
it may work because i read some of forum members tried ardatdat's kernel with Optimus 2x and it worked with LG Optimus 2X...
EmoBoiix3 said:
I'm especially bad with kernels , not to mention port them . But if the other devs port them they might just be able to boot my ICS .
This was sent from a Galaxy Ace. Problem?
Click to expand...
Click to collapse
but digging deeper, i found out they dont have the hardware acceleration :/
sucks... but still, better than no ICS!
mj.vikram said:
it may work because i read some of forum members tried ardatdat's kernel with Optimus 2x and it worked with LG Optimus 2X...
Click to expand...
Click to collapse
Yes, the problem with porting the kernel from O2X will be in H/W acceleration....
Until, we get any of the official NVIDIA Tegra2 drivers... we wont be able to get hardware acceleration.....
So, just wait for another month or so... dear SGR lovers......
here i have found jellybean for allwinner a13 tabs but hardly any of this rom works fully well ! there is cyanogenmod 9 available for allwinner a13 tabs
but the same problem the touchscreen do not works !
i request help to develop cyanogenmod 10 for this device from devs of xda developer.com
mostly the specs are found in this tab are
1GHZ processor
mali-400 gpu
512 mb ram
7 inch screen
here are the links for jellybean which do not work fine as it should be http://pan.baidu.com/share/link?shareid=102573&uk=420337580
http://file2.mydrivers.com/tablet/Teclast_P76a_K3G5-Android4.1.1-V2.04-71B2.zip
pls help us out to make cyanogenmod 10 !
no reply please guys help me out
icoolguy1995 said:
no reply please guys help me out
Click to expand...
Click to collapse
guys please no reply from anyone
Did you test the rom with your alpha???
Sent from my Funbook Infinity.
Ganesh A said:
Did you test the rom with your alpha???
Sent from my Funbook Infinity.
Click to expand...
Click to collapse
yes but touchscreen is not working
icoolguy1995 said:
yes but touchscreen is not working
Click to expand...
Click to collapse
To Fix your touchscreen try following the instructions on my thread it works for most allwinner a13 tablets and i have had great success with it... thee is also a ported jellybean rom for the a13...
>>>>> http://forum.xda-developers.com/showthread.php?t=2189569 <<<<<
Yea... i flashed that jelly bean from the link above and installed TS drivers all went fine, a bit complicated but fine. Now im trying other roms to see will it work too. Mine tablet is ployer momo9 III (three generations).
Will report latter what i did. :good:
EDIT: Not bad. Running fine, but still i want cyanogenmod
Hey guys
I was just going through some forums on the web and came up with Ubuntu for android based phones
.
.
I m currently using galaxy ace(GT-S5830) running cm 10.1 and I m eager to try Ubuntu on my droid
.
.
Can anyone please share the instructions and help me .....
Has anyone been successfully running Ubuntu?
I m not sure whether Ubuntu works for Armv6 devices..
Please help
Sent from my GT-S5830
This is a question and belongs in question and answers section. Plus it hasn't been released yet...
~-~-~-~-~-~-~-~-~-~-~-~-~
Phone: Samsung galaxy s2 t989
Rom: Jedi knight 6 4.0.4
Kernel: Jedi kernel 2
-~-~-~-~-~-~-~-~-~-~-~-~-
and you thought celebrities weren't smart. =P
you can run Ubuntu in a virtual machine on that class of phone. However you will need to use vnc or SSH to access the terminal. The new native version of Ubuntu which was announced this week is different though and can doesn't require the vnc method. It doesn't support the CPU in your phone at the moment, but hopefully if its open source someone will port it. I think that chip is the same or close to the one in mine and we still have a very active development community.
Sent from my GT-I5500 using xda app-developers app
I completely agree to the fact that armv6 devices are not currently supporting Ubuntu....
Yet there is an upload on YouTube....
(http://www.youtube.com/watch?v=wCesfuEXAZI)
.
Plus to add more to it...
I was going through the developers blog to check the list...
( http://linuxonandroid.blogspot.no/p/working-devices.html?m=1)
galaxy ace running cm 7.2 is listed
-anuj
http://androlinux.com/android-ubuntu-development/how-to-install-ubuntu-on-android/
I got it .....there s a guy successfull in installing Ubuntu on galaxy ace
Looks pretty sleek...
https://www.youtube.com/watch?v=sLtcj7FdIYA&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
this is compatible with note n7100??
Check it here : http://linuxonandroid.blogspot.no/p/working-devices.html?m=1)
:thumbup: