How to know what baseband is compatible with MIUI rom? I have tried to install MIUI roms, but internet not working. MIUI baseband version is similar to stock 2.3.3 baseband. Maybe updating baseband to compatible with MIUI is help?
It should work right away. Have you tried doing a hard reboot by holding volume up and power button while your phone is on?
Or try putting it go airplane mode, reboot, then take off airplane mode.
Thank you for your reply.
Yes I`ve tried hard reboot and airplane mode. Nothing changes.
You might need to add your pan. Not sure on how to do it for different carriers though.
ravshani said:
How to know what baseband is compatible with MIUI rom? I have tried to install MIUI roms, but internet not working. MIUI baseband version is similar to stock 2.3.3 baseband. Maybe updating baseband to compatible with MIUI is help?
Click to expand...
Click to collapse
If you had the wrong baseband you wouldn't have service at all, not just data.
If your APN is fine, try removing the battery while the phone is on, then the SIM card, wait about 20 seconds, then put them back in and turn your phone on. Flashing custom roms sometimes messes up your network, and the above procedure worked for me.
jj_z1 said:
If you had the wrong baseband you wouldn't have service at all, not just data.
If your APN is fine, try removing the battery while the phone is on, then the SIM card, wait about 20 seconds, then put them back in and turn your phone on. Flashing custom roms sometimes messes up your network, and the above procedure worked for me.
Click to expand...
Click to collapse
Thank you for reply. I`ve tried. Not working anyway ((
What carrier u use?
Sent via G2X-SINGH-UI
nycelitemaster said:
What carrier u use?
Sent via G2X-SINGH-UI
Click to expand...
Click to collapse
MTS Uzbekistan
Get their carrier info and when you go in apn setting select tmobile and edit that info there.
Related
Phone info:
Nexus S GT-i9020A
carrier:Fido
location:Canada
I was using the formels MIU os and everything was fine. I flashed Brainmaster's Stock ICS 4.0.3 and then lost signal. I can't search for networks nothing. I even tried installing the radio that corresponds to my phone, which I assume is UCKF1. I have gone back to MIU and STILL have no signal.
I've tried *#*#4636#*#* and selecting the band to USA.
When flashing other roms and kernels, this never happened to me. Any help please? Been trying to fix this since yesterday and now luck D'x
Probably the wrong radio. Download the full stock 2.3.6 for your device and flash only the radio from there.
I am actually haveing the same issue, seems to be efs is currupted...
nagameno said:
Phone info:
Nexus S GT-i9020A
carrier:Fido
location:Canada
I was using the formels MIU os and everything was fine. I flashed Brainmaster's Stock ICS 4.0.3 and then lost signal. I can't search for networks nothing. I even tried installing the radio that corresponds to my phone, which I assume is UCKF1. I have gone back to MIU and STILL have no signal.
I've tried *#*#4636#*#* and selecting the band to USA.
When flashing other roms and kernels, this never happened to me. Any help please? Been trying to fix this since yesterday and now luck D'x
Click to expand...
Click to collapse
maybe you can go down to 2.36 then update to 4.0 again
szk5230 said:
maybe you can go down to 2.36 then update to 4.0 again
Click to expand...
Click to collapse
athani said:
Probably the wrong radio. Download the full stock 2.3.6 for your device and flash only the radio from there.
Click to expand...
Click to collapse
@szk, @athani, I have tried that. I have used my stock rom that came with my phone, still no luck.
nagameno said:
@szk, @athani, I have tried that. I have used my stock rom that came with my phone, still no luck.
Click to expand...
Click to collapse
You mean restoring from nandroid backup? That won't do the trick because CWM backup doesn't include radio. You have to use the full OTA package for your phone model.
suksit said:
You mean restoring from nandroid backup? That won't do the trick because CWM backup doesn't include radio. You have to use the full OTA package for your phone model.
Click to expand...
Click to collapse
I love you man! It worked perfectly x'3! Thanks!
nagameno said:
I love you man! It worked perfectly x'3! Thanks!
Click to expand...
Click to collapse
iam happy to hear that ！ congratulations！！！
Flash a diff one
If u used brainmasters with the new radio you could of just flashed an older one. I had that problem too went back to b3 and worked fine
Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)
Upgraded to jelly bean OTA and after which no network signal ....... tried hard reset still no network......... do not know what to do...........help
No network signal? or do you mean no internet? and are you rooted? is your sim card readable? please give more details
network signal ..
Billchen0014 said:
No network signal? or do you mean no internet? and are you rooted? is your sim card readable? please give more details
Click to expand...
Click to collapse
sir network signal tower is not picking up .... when you dial says "no network".. sim working fine in other phone
vishal68 said:
sir network signal tower is not picking up .... when you dial says "no network".. sim working fine in other phone
Click to expand...
Click to collapse
Are you rooted? If so flash a different radio or else go to the store they can fix. There is nothing you can do without root.
Xxx oops! accidentally beamed from my awesome NEXUS S! xxX
I have the same problem.
It all started when I tried to flash a new JB ROM. I tried Paranoid, XenonHD, JellyBean and none of them were able to connect to my cellular network. Before that I used AOKP and when they released their JB build 1 I tried flashing it as usual with a factory reset and then flash ROM. But I still couldn't connect to my cellular network. I then tried to flash build 1 over my restored nandroid and this time I could connect. It was just like there was some important file that the factory reset removed.
Today I'm running Codename 3.4.0 that I flashed over the JB build from AOKP and I can connect and use the phone but at the same time I feel that the phone is not as responsive and so forth, not because of JB but more because of this flashing over and over again.
I have thought about going back to stock and start over but I'm not sure that would solve it, or at least that is more work then trying to fix this in any other way. (I presume)
Just recently I tried to install the latest Codename (3.5.0) and as usual I did a factory reset and wiped Dalvik, then flashed ROM and GApps but could not connect to cellular. I then tried to flash radio from this thread http://forum.xda-developers.com/showthread.php?t=1116884 both the KF1 and KI1 but still doesn't work.
All this time I can unlock my SIM when the phone starts and I can search for cellular network but trying to connect just gives me an error code stating that I can not connect and that I should try again later.
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Sonic-NKT said:
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=47978878#post47978878
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Also this talks about GSM Data problem, i cant even do phonecalls/sms, its not even asking for my sim code..
I then tried to flash back to stock but now RSD Lite 6.1.5 wont show my device... (all drivers installed).
Im really getting frustrated.
EDIT:
ok tried another PC with Win7 (mine runs 8.1) and now RSD Lite seems to work
Update: Now back to stock... GSM Works fine after i activated it... i now try to reflash cm10.2 and see what happens
Ok its working now
everything out of the box...
i dont know what went wrong the first time cause i did exactly the same as far as i know...
Sonic-NKT said:
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Click to expand...
Click to collapse
Indeed this line was likely the relevant one
If missing just add it.
Hello everyone!
I've started playing a bit with my Xperia L as I use it now as my backup phone and wanted to customize it a bit (tried several roms, rooted it, installed a recovery, tried some more roms... )
I went back to stock rom recently because I wasn't sure I'd be able to use it with my smartwatch, but ever since I went back to stock my phone can't pick any signal from any network!! I tried several sims but to no avail... tried flashing another stock rom from xperifirm but no success either.... same thing when I tried through pc companion.
The phone is wotking fine each time EXCEPT for the network! also, I had troubles entering flash mode recently, no matter how long I would press the vol-down button
Any help would be greatly appreciated please~ would be a shame to trash this otherwise very good phone!
PS: excuse my English I'm not native ^^'
Kirua_Z said:
Hello everyone!
I've started playing a bit with my Xperia L as I use it now as my backup phone and wanted to customize it a bit (tried several roms, rooted it, installed a recovery, tried some more roms... )
I went back to stock rom recently because I wasn't sure I'd be able to use it with my smartwatch, but ever since I went back to stock my phone can't pick any signal from any network!! I tried several sims but to no avail... tried flashing another stock rom from xperifirm but no success either.... same thing when I tried through pc companion.
The phone is wotking fine each time EXCEPT for the network! also, I had troubles entering flash mode recently, no matter how long I would press the vol-down button
Any help would be greatly appreciated please~ would be a shame to trash this otherwise very good phone!
PS: excuse my English I'm not native ^^'
Click to expand...
Click to collapse
Do you have the same problem on custom ROMs?
n78 shadow said:
Do you have the same problem on custom ROMs?
Click to expand...
Click to collapse
No, I haven't unlocked the bootloader actually, so I didn't get to try custom roms. Really interested by serajr's roms though but I'd rather fix the issue with signal first
Kirua_Z said:
No, I haven't unlocked the bootloader actually, so I didn't get to try custom roms. Really interested by serajr's roms though but I'd rather fix the issue with signal first
Click to expand...
Click to collapse
try other network modes goto
settings>more>mobile networks >netwok mode
n78 shadow said:
try other network modes goto
settings>more>mobile networks >netwok mode
Click to expand...
Click to collapse
Tried that but to no avail... even tried rebooting the phone after each change (tried the different options, 3G only, 2G only, 3G/2G) but still not working :/ any ideas?
Kirua_Z said:
Tried that but to no avail... even tried rebooting the phone after each change (tried the different options, 3G only, 2G only, 3G/2G) but still not working :/ any ideas?
Click to expand...
Click to collapse
First try the SIM card on other phone
If it works put it back on your phone and check out if the IMEI is available
Type *#06# in dialer
Insert the sim card with a tiny piece of paper on top of it so it doesn't move. I had a similar problem and this fixed it.
n78 shadow said:
First try the SIM card on other phone
If it works put it back on your phone and check out if the IMEI is available
Type *#06# in dialer
Click to expand...
Click to collapse
Ok so the SIM card is working, tried it on another phone, no problem. I checked the IMEI after putting it back in the xperia L and it's available too.
Also, @stuckbootloader, tried your fix too but to no avail :/
Hello guys~ Any other idea?