Help!!!
I have been stuck in a boot loop since last night. I tried gtg's ultimate_unbrick solution. Odin keeps toggling between COM4 and blank in the ID:COM section. While COM4 is showing I click Start. The message box shows added/removed as the ID:COM section toggles. It also shows the repartition operation failed.
Related
Does Odin, Heimdall and Oneclick(still heimdall) work on all s5570s??
I flashed my phone with the wrong recovery image and the phone boots only to Download mode, emergency download mode and the samsung logo. I have since tried Odin but it gets stuck on "plcatform verification", tried heimdall (after I painstakingly created a heimdall package for the galaxy mini) but it gets stuck at "Error: could not initialize protocol" and one click simply says my phone is not connected.
So I'm now wondering since this is a soft brick,why are these methods failing even after trying all suggestions on this forum. I have tried this on Open Suse and Windows Xp and I have also seen a trail of frustrated owners who bricked their phones. Has someone found a solution to this black sheep that stray from normal methods of unbricking.
I believe the Galaxy mini is the most troublesome device to own when customizing it.
pinye said:
Does Odin, Heimdall and Oneclick(still heimdall) work on all s5570s??
I flashed my phone with the wrong recovery image and the phone boots only to Download mode, emergency download mode and the samsung logo. I have since tried Odin but it gets stuck on "plcatform verification", tried heimdall (after I painstakingly created a heimdall package for the galaxy mini) but it gets stuck at "Error: could not initialize protocol" and one click simply says my phone is not connected.
So I'm now wondering since this is a soft brick,why are these methods failing even after trying all suggestions on this forum. I have tried this on Open Suse and Windows Xp and I have also seen a trail of frustrated owners who bricked their phones. Has someone found a solution to this black sheep that stray from normal methods of unbricking.
I believe the Galaxy mini is the most troublesome device to own when customizing it.
Click to expand...
Click to collapse
absolutely no coz i was custom rom my LilG always ..
hey guys..
i bought a buddies note 2 last night, and he had some weird rom on it. i formatted the hard drive, and attempted to install a new rom using odin.
i received a couple error messages in odin. first i got:
first i got: Can't open the serial(COM) port.
then i got: <ID:0/003> Complete(Write) operation failed.
a quick google searche attributed those to kies running in the background, so i closed keys, and ended all related processes.
i restarted odin and tried again, but got "Can't open the serial(COM) port." message again.
some answers i found on google were to restart the phone and restart odin. i restarted my phone. only now, it looks like the phone is bricked with the following error message: "Firmware upgrade encountered an issue. Please select recover mode in Kies & try again.
I loaded up Kies, but the phone is not being detected by my computer, and it just hangs on "Connecting"
I tried switching the cable into another USB port, and the computer DID detect the phone momentarily, but only for that split second. Kies just tried to connect again, but remained in "Connecting", and then ultimately failed, recommending i reboot my device.
am i ****ed here? what can i do?
update...the phone will actually go into download mode every few times i restart it.
however, it will not be detected by my computer, although odin does detect it.
unkped some
bump?
Okay, so I tried to flash on Android Gingerbread on Froyo though Odin. I assembled all the files rightly and still it won't re-partition. I unplugged the USB cable and now the phone doesn't turn on. It shows "Computer ! phone" kind of symbol, but download mode STILL works. I also kept trying to flash, but Odin hangs up and then fails. I have checked all the threads related to this, but those didn't do it for me. Any solution, please?
Hey guys, so I finally decided to post here after spending an embarrassing amount of time trying to fix my problem and getting nowhere. I have an Samsung galaxy s6 edge that gets stuck on the loading screen when booting, and won't go into recovery mode (download mode works fine). I have tried to flash the original firmware using Odin with no success...it keeps getting stuck on the "Initialization" step. Some times after waiting a very long time it gives the error message can't open the serial (com) port, but as i mentioned odin does detect my phone.I've tried 3 different cables, 2 different laptops with 5 usb ports in total, 3 different versions of Odin (3.07, 3.09, 3.10) all to no avail. I have downloaded the Samsung Mobile Drivers and my computer does recognize the device (though it thinks its a modem and not a phone). I'd appreciate some assistance in reviving my device, thanks!
Yesterday evening, after downloading the official firmware from sammobile.com, installing the samsung driver, activating OEM Unlocking and USB Debugging mode, I started to flash the firmware with the latest version Odin. It gave md5 error while loading the AP file on Odin. When I searched on the net, it was said to just delete the md5 extension of this file and try again. So I did that and the firmware started to load normally. When the green line was near the end, it stayed there for about 10 minutes. I was in a hurry too. I disconnected the phone from the PC so I could reinstall it at home.
But the phone gave the warning "An erorr has occured while updating the device software". Neither download nor recovery mode was available.
Smart Switch did not see the phone. When I tried to reinstall with Odin, the green line under the Odin USERDATA text got stuck towards the end, although there was no line or movement on the phone. No movement for 15-20 minutes. What should I do and what is the outcome of this situation? I would appreciate it if experienced, expert people share information. Thank you in advance. I am waiting.
still waiting..