Im using cyanogen 6 RC2 and tried also RC1 and have major battery draining issues ive tried everything
At this point anyone know how I go back to the stock 2.1 EPE54B build (ATT 3G bands)?
Thanks for any assistance
your phone is rooted so all you need to do is look for a 2.1 Rom from your phone forum and then flash that Rom. This should take you back to 2.1
Also if you did a nandroid backup before you upgraded to 2.2 then you can boot into recovery and do a nanadroid restore to take you back to 2.1.
If you do not have a nanadroid back up then that is why we always advise to do a nanadroid backup before flashing any Roms....
jahnile said:
your phone is rooted so all you need to do is look for a 2.1 Rom from your phone forum and then flash that Rom. This should take you back to 2.1
Also if you did a nandroid backup before you upgraded to 2.2 then you can boot into recovery and do a nanadroid restore to take you back to 2.1.
If you do not have a nanadroid back up then that is why we always advise to do a nanadroid backup before flashing any Roms....
Click to expand...
Click to collapse
I use titanium is that ok? Also do I need to flash the radio back to the older one or can I keep the froyo one?
EPE54B update zip should be ok from here right? Also if I do need to flash back the radio can I also use the files from here?
http://android.modaco.com/content/google-nexus-one-nexusone-modaco-com/300414/10-may-stock-roms-erd79-epf21b-images-zip-online-kitchen-optional-root-insecure-himem/
Ok titanium is ok, but before you flash back to 2.1 I would recommend a nandroid. A nandroid back up would restore your entire system/os just,in case u need to restore your system.
About the radio: you do not need to flash back the radio, this is not required.
Now you can use any of the stock 2.1 rom of your choice from this post http://forum.xda-developers.com/showthread.php?t=744605
What I would have not ks this:
1.Titanium back up
2. Nandriod back
3.wipe data, factory reset, etc
4. Flash 2.1 rom
Reboot and u are back to 2.1 stock
Remember do not flash back the radio
Sent from my EVO using XDA App
jahnile said:
Ok titanium is ok, but before you flash back to 2.1 I would recommend a nandroid. A nandroid back up would restore your entire system/os just,in case u need to restore your system.
About the radio: you do not need to flash back the radio, this is not required.
Now you can use any of the stock 2.1 rom of your choice from this post http://forum.xda-developers.com/showthread.php?t=744605
What I would have not ks this:
1.Titanium back up
2. Nandriod back
3.wipe data, factory reset, etc
4. Flash 2.1 rom
Reboot and u are back to 2.1 stock
Remember do not flash back the radio
Sent from my EVO using XDA App
Click to expand...
Click to collapse
Sorry for all the questions but I know with CM you need to also install google add ons for the market and maps and such. Is that also the case with this? Or since they are stock they automatically come with it?
NP. Anything that's stock will be included in the rom. It may not be the latest version but you will have an option to update once you lunch the market.
Also u,are doing a titanium backup so anything that's missing you can get back. Once you flash back u,can,check,to see if you have those apps, if u don't then just install and run titanium backup. You can run a restore operation to get all missing apps +data.
Sent from my EVO using XDA App
jahnile said:
NP. Anything that's stock will be included in the rom. It may not be the latest version but you will have an option to update once you lunch the market.
Also u,are doing a titanium backup so anything that's missing you can get back. Once you flash back u,can,check,to see if you have those apps, if u don't then just install and run titanium backup. You can run a restore operation to get all missing apps +data.
Sent from my EVO using XDA App
Click to expand...
Click to collapse
Thanks. Too bad I can't find the manual stock 2.2 in order to install it and try. On 2.1 I would get the Ota update request but it would fail saying invalid signature. Think it's cause of my recovery image.
Went to CM V5.0.8 and havnt had an issue since so there is a bug somewhere in 6 since a few other people are having similar issues as well
ok guys i have my g2x rooted and i did a backup my stock rom on rom manager app... and flashed cm7.. now how do i find the rom the a backup before?
If you boot up Rom manager you should be able to go to the Restore function and flash your backup and go back to what you had before.
gypsy214 said:
ok guys i have my g2x rooted and i did a backup my stock rom on rom manager app... and flashed cm7.. now how do i find the rom the a backup before?
Click to expand...
Click to collapse
If you want to know where the rom is physically stored to, I believe it is on your external sd card/clockwork/backups (or something to that nature, cannot confirm because I am at work right now).
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.
i had searched almost all the links but i didnt find exactly..
can any one please tell me what are the stable roms available for STOCK ICS 4.0.4 AT&T version??
please give me links
thank you
vdpraneeth said:
i had searched almost all the links but i didnt find exactly..
can any one please tell me what are the stable roms available for STOCK ICS 4.0.4 AT&T version??
please give me links
thank you
Click to expand...
Click to collapse
You can try the ICSupercharged,one of the most best rom!
http://forum.xda-developers.com/showthread.php?t=1648421
Or the Numa which is simple and beautiful.
http://forum.xda-developers.com/showthread.php?t=1960679
Both roms works fine on AT&T
atrix2 said:
You can try the ICSupercharged,one of the most best rom!
http://forum.xda-developers.com/showthread.php?t=1648421
Or the Numa which is simple and beautiful.
http://forum.xda-developers.com/showthread.php?t=1960679
Both roms works fine on AT&T
Click to expand...
Click to collapse
if i want can i get back to stock ICS again safely(without bricking)??
if yes, please give me the link for that process
vdpraneeth said:
if i want can i get back to stock ICS again safely(without bricking)??
if yes, please give me the link for that process
Click to expand...
Click to collapse
Not sure for AT&T.
But if you want to back to stock.
You need to create a full backup of your current stock ics with Boot strapper (clockworkmod) or Bootmenu manager before you flash the rom.
If you want back to stock just wipe data and restore your backup.
atrix2 said:
Not sure for AT&T.
But if you want to back to stock.
You need to create a full backup of your current stock ics with Boot strapper (clockworkmod) or Bootmenu manager before you flash the rom.
If you want back to stock just wipe data and restore your backup.
Click to expand...
Click to collapse
can i flash superchargerV7 from CWM recovery??
in the page its given only boot menu manager..
if i want to return to stock ..is restore just enough??
but i saw in the other thread that we need to flash stock rom and then restore
which is correct?
vdpraneeth said:
can i flash superchargerV7 from CWM recovery??
in the page its given only boot menu manager..
if i want to return to stock ..is restore just enough??
but i saw in the other thread that we need to flash stock rom and then restore
which is correct?
Click to expand...
Click to collapse
The page say only bootmenu so you just use bootmenu.
Restore is enough,but please make sure you click the full backup,not the fast backup.
So yea basically what the main question was, I am on 4.2.2 and successfully flashed a rom via safestrap. I am not a dev edition but was wondering if I try to flash this to the stock rom will I have to RSD back to stock or will it work? Thanks <3333
H411UCIN093NIC said:
So yea basically what the main question was, I am on 4.2.2 and successfully flashed a rom via safestrap. I am not a dev edition but was wondering if I try to flash this to the stock rom will I have to RSD back to stock or will it work? Thanks <3333
Click to expand...
Click to collapse
Make a backup, restore your backup if you want back on stock.
akellar said:
Make a backup, restore your backup if you want back on stock.
Click to expand...
Click to collapse
try it, if anything happens just flash back to 4.2.2