I tried some tweaks that I liked and wanted them on my phone but none of them seemed to work.
Do any of you know any tweaks and mods that would work with ROgers stock Rooted ROM ?
like battery percentage tweak and 14 panel toggle ?
I also have CWM installed.
Any insight on anything would be appreciated
How U Do Dat?
I have the same model, haven't gotten as far as you though. I'm rooted. period. How'd you flash cwm? I tried Doomlord v3 no luck.
Easiest way to flash cwm is download rom manager. Then choose to install cwm recovery for the tmobile sgs2
Will it affect anything when (and if) I try to restore my stock rom from CWM?
Its not clear what your asking. You can do a nandroid backup of your stock rom in cwm. Ajd restore it anytime you want.
I'm on rogers stock rooted and I have the battery mod and toggles..
Just have to read a bit, it was simple
boywithabeard said:
Will it affect anything when (and if) I try to restore my stock rom from CWM?
Click to expand...
Click to collapse
A nandroid backup backs up your rom exactly how it is.
Let's say I want to flash a rom and made a backup thru CWM of my stock rom will I be able to keep root if I flash it back to the stock rom ?
II'm doing this cause I care most about no auto brightness issue than the actual advantage to go with a custom rom.
Thanks
Why don't you just root your stock ROM then? You need to be rooted to flash CWM recovery anyways..
rener78 said:
Let's say I want to flash a rom and made a backup thru CWM of my stock rom will I be able to keep root if I flash it back to the stock rom ?
Click to expand...
Click to collapse
If your ROM is already rooted, and you're restoring it from CWM, yes. If you're using fastboot to re-flash the stock ROM, no, you'll have to re-root it.
I'm kind of confused about what you're asking, though. Can you give more specific details? Are you going to flash a different ROM and try to flash the stock ROM, or parts of it, on top of the new ROM? I wouldn't do that unless you're very sure of what you're doing.
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.
I have an Verizon GT7.7 [i815] and would like to go back to the stock ROM, but I'd like to keep root and Clockwork recovery. I would also like to just flash the stock version via Clockwork recovery. Is there a copy of the latest stock ROM that is flashable with CW?
Tom2112 said:
I have an Verizon GT7.7 [i815] and would like to go back to the stock ROM, but I'd like to keep root and Clockwork recovery. I would also like to just flash the stock version via Clockwork recovery. Is there a copy of the latest stock ROM that is flashable with CW?
Click to expand...
Click to collapse
Try this link http://www.mods4cars.com/pub/xda/index.php?subdir=i815&sortby=name
3l1k said:
Try this link http://www.mods4cars.com/pub/xda/index.php?subdir=i815&sortby=name
Click to expand...
Click to collapse
Thank you very much! Lots of good files there!!! :good:
So yea basically what the main question was, I am on 4.2.2 and successfully flashed a rom via safestrap. I am not a dev edition but was wondering if I try to flash this to the stock rom will I have to RSD back to stock or will it work? Thanks <3333
H411UCIN093NIC said:
So yea basically what the main question was, I am on 4.2.2 and successfully flashed a rom via safestrap. I am not a dev edition but was wondering if I try to flash this to the stock rom will I have to RSD back to stock or will it work? Thanks <3333
Click to expand...
Click to collapse
Make a backup, restore your backup if you want back on stock.
akellar said:
Make a backup, restore your backup if you want back on stock.
Click to expand...
Click to collapse
try it, if anything happens just flash back to 4.2.2