Database Info

Micromax A60 CWM-Recovery v5 by ngage_me

Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..

CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....

For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...

ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........

????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse

link ?
dude when are you going to post the link ? and i have clicked on thanks !

ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro

Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......

@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........

confirmed successful flashing with android download tool on micromax a60.

thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e

@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4

Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?

awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro

rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.

Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!

small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do

Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...

ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...

ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.

Damn >.< Pls help

i got a few problems with my fit ...
I flashed a package via cwm and voila its done reboot
1 second boot reboot 1 second boot and so on
I think its bricked , but its booting
I come in download mode, flash new DDKT3
boot it and 1 second boot reboot 1 second boot reboot and so on
i have no resolution for that pls help me

DQiB said:
i got a few problems with my fit ...
I flashed a package via cwm and voila its done reboot
1 second boot reboot 1 second boot and so on
I think its bricked , but its booting
I come in download mode, flash new DDKT3
boot it and 1 second boot reboot 1 second boot reboot and so on
i have no resolution for that pls help me
Click to expand...
Click to collapse
ohh **** .. !!
sad to hear that .. !!
try to flash another firmware.. !
fit is going in recovery mode or not .. ??
http://forum.xda-developers.com/showthread.php?t=1120880 see this may be it will help you
---------- Post added at 09:25 PM ---------- Previous post was at 09:23 PM ----------
DQiB said:
i got a few problems with my fit ...
I flashed a package via cwm and voila its done reboot
1 second boot reboot 1 second boot and so on
I think its bricked , but its booting
I come in download mode, flash new DDKT3
boot it and 1 second boot reboot 1 second boot reboot and so on
i have no resolution for that pls help me
Click to expand...
Click to collapse
or this one ..
http://www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/

DQiB said:
i got a few problems with my fit ...
I flashed a package via cwm and voila its done reboot
1 second boot reboot 1 second boot and so on
I think its bricked , but its booting
I come in download mode, flash new DDKT3
boot it and 1 second boot reboot 1 second boot reboot and so on
i have no resolution for that pls help me
Click to expand...
Click to collapse
You install S5670XXKPI. He has 4 files. Later you can install the ROM that you want.

I think ..u just soft bricked your phone... dont worry ..not a big problem!
first try to flash 2.3.4 firmware...if the phone still gives the same problem...then install 2.2 firmware first and then gingerbread....that's it ..!

Dude its simple.
Flash a firmware with 4 files like kpi from odin and then flash the firmware you want on that......this was helpful in most of the cases........

wow thahks for ur gr8 help
i think i try to flash 2.2 or kpi
Here is my problem detailed:
i come into download mode
but if i want to boot or come into recovery randomly reboots after every second
So i cant use phone and after i flashed kt3 phone also randomly reboots

DQiB said:
wow thahks for ur gr8 help
i think i try to flash 2.2 or kpi
Here is my problem detailed:
i come into download mode
but if i want to boot or come into recovery randomly reboots after every second
So i cant use phone and after i flashed kt3 phone also randomly reboots
Click to expand...
Click to collapse
And latest ROM S5670XWKTI have 4 files. He is for Europe (Open Germany).
Link:
http://www.sammobile.com/firmware/
In Serch write: S5670XWKTI and Enter.

ZmisiS said:
And latest ROM S5670XWKTI have 4 files. He is for Europe (Open Germany).
Link:
http://www.sammobile.com/firmware/
In Serch write: S5670XWKTI and Enter.
Click to expand...
Click to collapse
wow ferst german Android

same problem
newest with 4 files -.-

DQiB said:
same problem
newest with 4 files -.-
Click to expand...
Click to collapse
Boot = Boot
Phone = Modem
PDA = CODE
CSC = CSC

Flash a stock rom and give it to samsung care, if you have warranty...
Sent from my g-fit using xda premium

i think so
and ZmimS im not stu***
so i give this phone my mother and buy me an ace
coz i cant wiait so olong for repaired phone ;-)

so, you have bootloop after flashing an update zip? did u wipe data and cache before that?

i dont call it bootloop i call it
Hzsdtdfsjkfhjhfe
coz when phone try to boot, only 0,5 seconds after brek shutted down, restart
and the same in a unbreakable Hzsdtdfsjkfhjhfe
i only come into download mode and nothing else

DQiB said:
i think so
and ZmimS im not stu***
so i give this phone my mother and buy me an ace
coz i cant wiait so olong for repaired phone ;-)
Click to expand...
Click to collapse
Sorry. I wrongly translated. I thought you got a problem with the installation, not to you have the same problem as before.
Once again, Sorry.

no problem but i think i must send it to samsung
Or i leave this forums here and change phone to Ace
But be not sad ;-)
I continue all my work for Fit/Mini

DQiB said:
no problem but i think i must send it to samsung
Or i leave this forums here and change phone to Ace
But be not sad ;-)
I continue all my work for Fit/Mini
Click to expand...
Click to collapse
OK. Greetings.

heyy dude when you install a stock rom then go to recovery mode do a full data wipe then reboot and wait a minute this will help you
Sent from my GT-S5670 using xda premium

haha im not stup**
if i flashed whole new rom via odin whats up?
my Bootloop and cant boot into recovery,
only in download mode

DQiB said:
haha im not stup**
if i flashed whole new rom via odin whats up?
my Bootloop and cant boot into recovery,
only in download mode
Click to expand...
Click to collapse
Lol..you got your phone in trouble huh..so much win. ehem.. xD
reflash a whole new baseband. it might do the trick.

Good people of XDA, have a look here!!!!!!!

noob alert!!!!!!
i had suvi rom v15...alright?
now i wanted to get back the stock rom but wanted all the junk eating apps to be there. alright.
so i flashed paplu's rom v1.10 which is supposed to have the important apps which you get in stock.
BUT WHEN I BOOT IT SHOWS SUPERFONE CANVAS 2 AND NOT CANVAS !!!!!!!!!!!!!!!!!!!!
PLEASE TELL ME A THREAD WHERE I CAN GET A ROM PURELY STOCK!!!
GUYS PLEASE PLEASE PLEASE

TanmayPandey said:
noob alert!!!!!!
i had suvi rom v15...alright?
now i wanted to get back the stock rom but wanted all the junk eating apps to be there. alright.
so i flashed paplu's rom v1.10 which is supposed to have the important apps which you get in stock.
BUT WHEN I BOOT IT SHOWS SUPERFONE CANVAS 2 AND NOT CANVAS !!!!!!!!!!!!!!!!!!!!
PLEASE TELL ME A THREAD WHERE I CAN GET A ROM PURELY STOCK!!!
GUYS PLEASE PLEASE PLEASE
Click to expand...
Click to collapse
A changed boot logo doesn't mean that you flashed the wrong rom. The zip by paplu3 is pure stock rom, with every stock particle,but with boot logo of stock ics.

any way to change boot logo?
so is there any way to change the boot logo to jb cuz i need to take it to a service centre.....also i had flashed the rom but i was not able to connect to wifi as it was showing authentication problem......

[email protected] said:
A changed boot logo doesn't mean that you flashed the wrong rom. The zip by paplu3 is pure stock rom, with every stock particle,but with boot logo of stock ics.
Click to expand...
Click to collapse
sorry friend. i just flashed it again and wifi is working fine but can something be done for boot logo. ty.

TanmayPandey said:
noob alert!!!!!!
i had suvi rom v15...alright?
now i wanted to get back the stock rom but wanted all the junk eating apps to be there. alright.
so i flashed paplu's rom v1.10 which is supposed to have the important apps which you get in stock.
BUT WHEN I BOOT IT SHOWS SUPERFONE CANVAS 2 AND NOT CANVAS !!!!!!!!!!!!!!!!!!!!
PLEASE TELL ME A THREAD WHERE I CAN GET A ROM PURELY STOCK!!!
GUYS PLEASE PLEASE PLEASE
Click to expand...
Click to collapse
Okay You need the stock JB boot animation right ?? Not a problem ! Here is it .....
download it replace the bootanimation in /system/media/ .set permisssion to rw-r-r Voila....
https://drive.google.com/file/d/0B7y_VN29B-FvVjhhQnZQS0tJNUE/edit?usp=sharing

internal storage
vish97 said:
Okay You need the stock JB boot animation right ?? Not a problem ! Here is it .....
download it replace the bootanimation in /system/media/ .set permisssion to rw-r-r Voila....
https://drive.google.com/file/d/0B7y_VN29B-FvVjhhQnZQS0tJNUE/edit?usp=sharing
Click to expand...
Click to collapse
why is it showing 500 mb internal storage? it had 1.5gb storage right??
and what is wr-r-r?
also what will happen if i factory reset the v1.11 stock rom of paplu?can i get the preinstalled apps back?
edit: wait a sec, http://forum.xda-developers.com/showthread.php?t=2040828 in this link it says a lot a stuff is needed to be replaced....and you tell only one thing to be replacd, not that i mean i dont trust you but need to be absolutely sure....

TanmayPandey said:
why is it showing 500 mb internal storage? it had 1.5gb storage right??
and what is wr-r-r?
also what will happen if i factory reset the v1.11 stock rom of paplu?can i get the preinstalled apps back?
edit: wait a sec, http://forum.xda-developers.com/showthread.php?t=2040828 in this link it says a lot a stuff is needed to be replaced....and you tell only one thing to be replacd, not that i mean i dont trust you but need to be absolutely sure....
Click to expand...
Click to collapse
Bro that thread shows how to change ur logo.bin and uboot.bin.those files comes first before boot animation
if u power on ur phone the procedure goes like this
uboot.bin--> logo.bin--> bootanimation.zip
so u mentioned for the JB boot aniumation .thus i provided u the files !
Your uboot.bin is a file that shows ur device name model etc etc ..... i comes first of all even when u entre the recovery mode.
Then ur logo.bin.... that depends on ur rom..in stock rom both uboot and logo are same .... so no need to touch those
Coming to the memory issue :i need more info
RW-R-R is the permission of the zip
:CHEERS::good:

vish97 said:
Bro that thread shows how to change ur logo.bin and uboot.bin.those files comes first before boot animation
if u power on ur phone the procedure goes like this
uboot.bin--> logo.bin--> bootanimation.zip
so u mentioned for the JB boot aniumation .thus i provided u the files !
Your uboot.bin is a file that shows ur device name model etc etc ..... i comes first of all even when u entre the recovery mode.
Then ur logo.bin.... that depends on ur rom..in stock rom both uboot and logo are same .... so no need to touch those
Coming to the memory issue :i need more info
RW-R-R is the permission of the zip
:CHEERS::good:
Click to expand...
Click to collapse
i also need that uboot file (it is that one which shows CANVAS ) . ...i want this file pls give a link or something. thanks.

after installing this theme,phone restarting again and again .what to do ?

http://forum.xda-developers.com/showthread.php?p=48869026
after installing above theme,phone restarting again and again .what to do ?

restored back using cwm recovery .cwm is awesome !!!!

http://forum.xda-developers.com/showthread.php?p=48869664
what are the requirements to install this theme >???

s7562 said:
http://forum.xda-developers.com/showthread.php?p=48869664
what are the requirements to install this theme >???
Click to expand...
Click to collapse
Instead of posting 3 times, you could edit your post...
Well on-topic : There are no Requirements to Install a Theme, If you readed the whole post, The only Requirement is That it only works on Full stock based roms.

[Q] [CM] BootAnimation Collection

I know nothing hot happens here now ( miss those days though)
anyways;
did we had a thread dedicated to bootanimation.. so that we can try different bootanimation ?

HELP
Could anybody Say How ?????
To install my own Boot animation at my Phone ......... GT-I5801

xda Santhosh said:
Could anybody Say How ?????
To install my own Boot animation at my Phone ......... GT-I5801
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1015155
Follow the instructions in the above thread.
Or you can exact the boot animation file from the CWM ZIPs and manually copy the boot animation file to '/system/media' and replace the previous one (if it exists).

Thanks ... for the reply
It works >>>>>>>>>