I rooted my phone and flashed this rom
http://forum.xda-developers.com/showthread.php?t=1403859
it completed flashing it and I rebooted it but it keeps rebooting over and over and won't load the phone. Any suggestions as to what to do? I took the battery out and tried rebooting it again but went back into the cycle. The first time after I flashed it I let it run for about an hour and a half but its still stuck.
Help please!
In the requirements, you can see you have to install the new 3.12 base firmware.
To install the package correctly you need to supercid before.
If you don't want to supercid have a look here or in mike1986 instructions in his ICS firmware thread.
Thanks Grandelama
Yea I figured that's what I needed to do after reading it up some more.
Related
Hi,
Alright, im totally new to this; I'm trying to run Android on my HD2...
So, All guides I found kind of talked about the same things:
1, Flash phone with HSPL3
2. Flash phone with Radio 2.15.50.40
3. Flash magldr v.1.13
4. Download a NAND ROM -- I was first trying with Cope's Cyanogen Rom, kept getting stuck on GO GO GO! (in magldr) after a while I actually got it to work, but couldn't get data to work, the first time I restarted the phone it got stuck again....
Then I flashed official tmobile wm, got rid of magldr, and started all over, but this time I tried flashing MDJ's Cyanogen Rom, however after resolving several previous issues i got stuck on GO GO GO! again...
also, I have tried with both magldr v 1.11 and 1.13
-------------------
Is there something wrong with the previous steps I took? Any suggestions?
There is another thing that was always wrong with my phone which might be causing this problem; ever since I got it it would sometimes get stuck on the first purple "stay together" screen and not want to move... Even after I restart the screen would persist, and the only solution was to let it 'chill' for a while before attempting to turn on again...[It got stuck even when I flashed the wm to get rid of mangldr]
So any suggestions on how could I get Android running ???
Thanks
Never mind....
It seems to have fixed itself!!! THIS IS GREAT!!! Skyfire, one bus away!!!!
Thanks to all for this awsome forum and for the great roms!!!!
xzpx said:
Hi,
Alright, im totally new to this; I'm trying to run Android on my HD2...
So, All guides I found kind of talked about the same things:
1, Flash phone with HSPL3
2. Flash phone with Radio 2.15.50.40
3. Flash magldr v.1.13
4. Download a NAND ROM -- I was first trying with Cope's Cyanogen Rom, kept getting stuck on GO GO GO! (in magldr) after a while I actually got it to work, but couldn't get data to work, the first time I restarted the phone it got stuck again....
Then I flashed official tmobile wm, got rid of magldr, and started all over, but this time I tried flashing MDJ's Cyanogen Rom, however after resolving several previous issues i got stuck on GO GO GO! again...
also, I have tried with both magldr v 1.11 and 1.13
-------------------
Is there something wrong with the previous steps I took? Any suggestions?
There is another thing that was always wrong with my phone which might be causing this problem; ever since I got it it would sometimes get stuck on the first purple "stay together" screen and not want to move... Even after I restart the screen would persist, and the only solution was to let it 'chill' for a while before attempting to turn on again...[It got stuck even when I flashed the wm to get rid of mangldr]
So any suggestions on how could I get Android running ???
Thanks
Click to expand...
Click to collapse
Hi, Can you please tell me how do you fix your data to work? On my HD2 everthing iworks fine except data using phone connection ( Data works fine on wifi). Please let me know how to fix this or send me a link for your android ROM. I am using Flash phone with HSPL2.08
2. Flash magldr v.1.13. Anroid version 2.2. I dont know the radio version i am using.
Thanks in advance. Mathew
I've rooted the phone using super one click and get root and superuser access. I've gotten CWM recovery to work. Once in recovery I Get an error when trying to make a backup of my stock rom. I ignored the error and tried to flash a custom rom. In the middle of the flash process my phone resets itself and stays stuck at the splash screen. I've odined the phone twice. re rooted and followed all steps people have given me, but everytime I still get the same result. Any thoughts? thanks.
check your mounts and what kind of SD card are you using? I had issues flashing the phone too because i had a SDHC card when using the original SD card it worked fine though... have you tried following the youtube guide by bd1692, if not here's a link...
Make sure you ODIN'd the phone to KG2
For the Root part...
http://youtu.be/wYC8XRqM-no
For flashing a ROM go to the following link and go to about 12:14 for the actual Flash part (He's using Smooth Maximus ROM but its the same for all of them...)
http://youtu.be/hJOFlRIKRRo
i was using an sdhc from the old mytouch 4g i had. ill try using the card that came with it and ill update here. thanks
same result. rom does a weird zoom on text half way through and it stay stuck at the sidekick splash screen and it constantly vibrates like there is an error until it resets all over again. im going to try a different rom. maybe that will help.
ok so it seems like it was the rom. i flashed project nocturnal with no problems. thanks =)
i seem to be having problems flashing any ayoteddy rom. as soon as it gets to flashing the modem. it bugs out and ends the flashing process and stays in a loop at the splash screen.
The "bugging out" is how the phone flashes the modem, and I'm guessing it stays at the splash screen because you didn't check your mounts before and after flashing.
i check the mounts twice before flashing. making sure i did all steps correctly. the splash screen loops only when flashing ayoteddy's roms. i tried project nocturnal and it flashed without a hitch.
Hey guys, I been away from the sensation for a few months now and I think I bricked it on my first flash back! I was flashing ARHD & I followed the noob guide, I downloaded firmware & updated, deleted the firmware file, performed super wipe, flashed the rom, and I checked my md5 sums. Now I'm bootlooping the white HTC splash screen, and sometimes I see the beats audio symbol but right back to the slash screen! Ahhh.... I use this line for work. I used the 3.30 firmware as it said to & I'm on boot 1.27? I know one of you guys can help, so please ANYONE,I've got a get this fixed tonight.....
well if its booting then fortunately you're not bricked lol
have you tried re flashing the new firmware?
I flashed the 3.30 that the installation guide I was following told me to. I have ext 2.2, so is that an issue or is it the correct recovery.
Anyone who can walk me through this I'd really appreciate it guys. Just like most, I rely on my phone for work. I'm a little worried here, I've flashed quite a few times and I've never had an issue like this that I couldn't restore out of.....
Try this??
what I did was everything you did.. except I used this firmware update...
Firmware from 3.30.401.1 & 3.30.401.101 RUU
--- MD5 checksum: 824295C6ACDC8D55BED9E0B913192DBE *PG58IMG.zip ---
--- Only for 3.30.401.1 & 3.30.401.101 based ROMs
Then I installed the ICS Energy rom, and everything works great.. I've also flashed a few other roms without issues.. I haven't tried the arhd yet.. I'm currently running the virtuous AOSP rom.. and still, everything works great.. I hope this helps
Just a side note.. have you tried formatting the sdcard then trying that setup? I did have issues with my sdcard in the beginning, but after formatting, I've had no issues..Also make sure the ROM you're using is made for the correct firmware, otherwise you'll have bootloops! hope this helped!
That's the same firmware I used, and I've ran the firmware upgrade twice now. Now right after I updated the firmware the first time I did it, I rebooted on accident & it wouldn't boot even before I flashed arhd.... is this normal?
It wouldn't boot into hboot? What I did was put all the needed files on my sdcard, flashed the firmware, removed the sdcard(while the phone is powered on).. booted into the rom, then put the scdard back in and removed the firmware update..then rebooted the phone, then wiped and loaded an ICS rom..that was really about all I did.. and so far all works well.. I'm really at a loss as to what the problem on your end is.. it sounds like you've done everything you're suppose to do..
You could try to run the relevant ruu (assume you have s-off?) and start again?
http://forum.xda-developers.com/showthread.php?t=1074559
Update::II flashed Virtuous and had no issues and everything is running perfect. Looks just like my transformer prime now. I doing know why at this point that my system would not play nice with ARHD, I followed the guide to the letter and I flashed the firmware 3.30 several timed just as directed. None the less, I am satisfied with this from, and my device is much smoother and more productive than the ****ty GS2 by T-Mobile that I had been using the last few months! I just can't retire my Sensation. Thank you to all who chimed in, you're a great community!
Bricked
That happened to me too when I tried to install ICS without updating the firmware
first.
I just re-booted to recovery and did a restore. I'm assuming you backed up your
ROM right?
Then at least your phone will go back to normal and you can start over...and use it for work haha
I'm good now on virtuous, but I just couldn't get ARHD to work for me. Yes I had upgraded to the proper firmware first, and I always compare md5 sums. I'm by no means an expert, but I always research, read and ask all the nessecary questions before I flash anything I'm not familiar with. I think there may just be rare occasions when some of the devices just won't play nice with certain software. Virtuous took on the first flash & I'm actually very pleased with it, so all's well that ends well. ICS is just so much more intuitive & functional for me
.
Okay.
So, I have tried to UTSE on this and found a thread that directed me to flash a new radio (http://forum.xda-developers.com/showthread.php?t=1116884) which I have done but the fastboot is still not letting my phone respond.
So...
My phone is a GT 19023.
I'd updated to jelly bean awhile ago but was having some serious performance problems and wanted to flash back down to ICS or GB. Of course, the recovery wasn't working so I went to Nexus Hacks and downloaded his recovery files, stupidly I didnt notice it was 4G specific (crespo4g), just that it was for ICS and JB. The recovery seemed to work ok, had the new touchscreen version, but then I tried to install a stock GB ROM from my SD card. At the end it seemed stuck on writing radio. Wasnt doing anything so assumed it was ok to reboot. When it rebooted every process was failing so I tried to do the fastboot flash recovery again and the phone just wouldnt respond.
Tht's where I am at now.
Saw another thread and got directed to the link above to flash the radio.
Did that, used the UCKF1 radio, no problems installed fine but the phone still won't respond to fastboot flash recovery using recovery-clockwork-3.0.2.4-crespo.
Can anyone point me in the right direction PRETTY PLEASE! I'm not a techie guy and its my only phone :crying:
You did a lot wrong here. NEVER DO SOMETHING UNTIL YOU HAVE COMPLETE KNOWLEDGE OF IT
Also you flashed the wrong radio. I would suggest you to stop as where you are right now.
You need to go complete stock first, by flashing the factory image.
Hey all! This is my first post here since i got my htc one S 2 days ago. I have read quite a bit on how to install custom roms and everything.
The very first ROM i installed was the venom viperOneS OTA 2.1.0 and it ran well until i noticed that my camera was not working. Not even through other apps that require camera. All it says is that the camera is unavailable and shuts down the apps. I tried dozens of things to fix the camera, but no luck. Then realised that my microphone didn't work and i couldn't call anybody.
I decided to get my phone back to stock, but it seems to be an extremely difficult process. I downloaded loads of RUU files (including the newest RUU Ville U JB 45) and after re-locking the phone, and running the .exe file i always get an error after its trying to change the signatures saying that this is not the right file for my phone. (When i press 'update' in the installed the current version is blank, not sure if this means anything).
Then i tried an older viperOneS OTA and was left with a bootloop.
Could somebody please help me out on how to get my phone to stock version?
And before you ask if i've wiped my phone before any ROM installation - i have multiple times.
Thank you in advance.