Database Info

Firmware 3.24.401.1 Problems

Tried updating firmware form 3.12.401.102 to 3.24.401.1 this morning and just got reboot loops. My CID is T-MOB010, modelid is PG5810000
I reinstalled my old PG58IMG.zip with 3.12.401.102 and it was back to normal, using ARHD 6.0.3
Looks like I won't be able to use Sense 3.6 for a bit

meyert11 said:
Tried updating firmware form 3.12.401.102 to 3.24.401.1 this morning and just got reboot loops. My CID is T-MOB010, modelid is PG5810000
I reinstalled my old PG58IMG.zip with 3.12.401.102 and it was back to normal, using ARHD 6.0.3
Looks like I won't be able to use Sense 3.6 for a bit
Click to expand...
Click to collapse
Well once you get the 3.6 rom it should be working with that firmware...

I hope so. Atleast now I know that this firmware is not backward compatible with 6.03.

how did u fix the boot-loop? i installed the same firmware, but now while the PG58IMG.zip is still in my phone, i can't even access the recovery from hboot. hboot just asks to update that file and then reboots ://

Soney09 said:
how did u fix the boot-loop? i installed the same firmware, but now while the PG58IMG.zip is still in my phone, i can't even access the recovery from hboot. hboot just asks to update that file and then reboots ://
Click to expand...
Click to collapse
Delete the pg58 file,
Put sd in pc and delete the pg file or try booting without sd in. you will need to re flash old firmware assuming your phone still won't boot
Sent from my CM7 Sensation XE using xda premium

where can i find the old firmware?

Get the ICS firmware from the op in insercoin ics thread
Sent from my CM7 Sensation XE using xda premium

Fixed!!
The firmware can work in the T-mob010 as long as you install ARHD 6.1.0 as well. Its a bit tricky because of the bootloop problem. But here's what I did
Boot into Recovery; mount USB;
Copy all three files (ARHD 6.1.0, AR-Swipe, PG58IMG.zip) to phone root.
Run AR-Swipe, phone will reboot into recovery
Run ARHD 6.1.0,
Reboot into bootloader
Click bootloader and hit the up volume to install firmware
First boot takes about 5 minutes
Some people said they didn't use AR-swipe and it was like an update, but I like clean installs. Good Luck

Ive tried searching for the links to download the 3 files mentioned above, i can only locate the PG58IMG file, within the list of the different firmwares. Can you post links to the rest so i can test this method? im anxious to try it out.
THANX

truth_born said:
Ive tried searching for the links to download the 3 files mentioned above, i can only locate the PG58IMG file, within the list of the different firmwares. Can you post links to the rest so i can test this method? im anxious to try it out.
THANX
Click to expand...
Click to collapse
It's all in a sticky at the top of the development section.
Sent from my HTC Sensation 4G with Beats Audio using xda premium

i must be completely blind, cuz i cannot see the sticky note that contains the links to the other two programs..

all firmwares are in the same thread if that is what you are trying to ask?
Everything is here http://forum.xda-developers.com/showthread.php?t=1459767

Bootloop on every rom

Hi, i have downloaded and flashed firmware 3.24 fine and now it says
Revolutionary
Pyramid pvt ship s-off rl
Hboot-1.27.1100
Radio-11.21.3504. 13_2
openADSP-v02.6.0.2226.00.0104
eMMC-boot
so i am guessing i have the correct HBOOT for 4.03/3.6 roms yeah?
problem is no matter what rom i try and flash [last one was Insert coin] after it tells me it has flashed and i reboot my phone i just get a bootloop..
I've always wiped my phone using 4ext full wipe and then proceeded to flash the rom am i installing the wrong firmware ? i am also superCID.
Any help will be appreciated, all i want to do is try ICS on my Sensation lol

Remove the firmware zip from your sd card.

Instead of using the full wipe try out the Super Wipe Script as written below.
Probably you find here a solution.
And on 4ext Recovery you have 2 suggestions on flashing a new rom:
TMOUS and KERNEL (latest could cause some problems)
I dont know what you have XE or non-XE.
With XE you should choose the 1,2 GHz Kernel.

Rhiannon224 said:
Remove the firmware zip from your sd card.
Click to expand...
Click to collapse
I'm having the exact same problem. I just went back to regular Gingerbread bootloader with this to get my phone to work:
http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22
I'm pretty sure this has been answered a million times, but I apparently never learned much about the firmware part of this . I rooted my phone a long time ago when Revolutionary first came out.
I probably missed something along the way and not sure what I did wrong. I even tried the other firmware 3.12 with the hope I could get it to boot. No luck.

2Noob4U said:
I'm having the exact same problem. I just went back to regular Gingerbread bootloader with this to get my phone to work:
http://forum.xda-developers.com/showpost.php?p=20681060&postcount=22
I'm pretty sure this has been answered a million times, but I apparently never learned much about the firmware part of this . I rooted my phone a long time ago when Revolutionary first came out.
I probably missed something along the way and not sure what I did wrong. I even tried the other firmware 3.12 with the hope I could get it to boot. No luck.
Click to expand...
Click to collapse
Were you trying to flash ICS ROMS or GB ROMS, you can't run GB on 1.27 h boot. H Boot 1.23 can run both GB and ICS. What were you trying to flash?
Have you read this thread http://forum.xda-developers.com/showthread.php?t=1459767
After you flash the firmware for ICS you have to delete the PG58IMG.zip from your sd card. Then flash the ICS ROM.

Rhiannon224 said:
Were you trying to flash ICS ROMS or GB ROMS, you can't run GB on 1.27 h boot. H Boot 1.23 can run both GB and ICS. What were you trying to flash?
Have you read this thread http://forum.xda-developers.com/showthread.php?t=1459767
After you flash the firmware for ICS you have to delete the PG58IMG.zip from your sd card. Then flash the ICS ROM.
Click to expand...
Click to collapse
I was trying to install InsertCoin (Latest). I updated the firmware and removed the file so I could boot into recovery again and install the ROM.
I Did a super wipe even though it appears you can do this with the ROM itself. I got the bootloop and read somewhere that I might need to install 3.12 firmware so I tried this and the boot screen just stayed on and wouldn't boot into the ROM so I could set everything up.
I tried reinstalling the firmware and rewiping and installing the ROM a few times with no success.
I just switched back to the gingerbread firmware to get my phone working again.
I must be doing something wrong, but it's the middle of my semester and I'm really trying to make this as painless as possible. I don't have time to be up working on this stuff all night long.
---------- Post added at 10:26 PM ---------- Previous post was at 09:41 PM ----------
I tried ARHD ICS ROM and installed the firmware and it worked like a champ!
My download of Insertcoin must have been corrupted. The links on their page are all messed up.
Thanks for your help

Help please!

I have been at this for 5 hours straight and I just can't find a SOLUTION...I've READ A LOT before posting this question...and still I can't find anything to help me. So can someone PLEASE HELP if you can. I will be as detailed as i can. I will start off with my phone specs and so forth: By the way i am on GB 2.3.4..
LOCKED
Pyramid PVT SHIP S-OFF RL
HBOOT- 1.27.000
Radio- 11.22.3504.07_M
OpenADSP-v02.6.0.2226.00.0131
emmc- boot
Okay, i wanted to download the ELEGANCIA ICS ROM but before i could i had to download a FIRMWARE PACKAGE(or just firmware). So i downloaded the Firmware from 3.32 RUU which is for the ELEGANCIA ROM...By the way, I DID THIS BEFORE I INSTALLED the ELEGANCIA ROM(i hadn't downloaded it yet..elegancia rom) I followed the instructions how to flash it. It said it would tell you what to do next..so i did it. Went into Recovery and flashed through sd and installed the ZIP file and when it asked if i wanted to udate it i pressed Yes...and then this is what HAPPENs NEXT.
It ask if i want to update and I do and then it says:
Parsing...[ SD ZIP]
[1] BOOTLOADER - Ok
Update Complete...
Press POWER to reboot.
So i press power and all it does is: BOOTS up and then TURNS OFF
It continues to do that...I believe it's called BOOT LOOPING.?
I pull out the battery and press VOL. Down plus POWER at the same tiime and it takes me back to the WHITE SCREEN and I see FASTBOOT, RECOVERY, FACTORY RESET, SIMLOCK and IMAGE CRC but does NOT let me choose. It automatically goes to HBOOT.
I have to pull battery or it will continue to BOOT itself on and off again. Even with the phone off, I connect it to my usb connection on my laptop and my device does not show on my laptop. Both the usb connection and usb cord are working properly.
That is my BIG PAIN in MY ASS right now!!
Can someone please help me.?

You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300

Sigg1996 said:
You will have to make your phone Super-CID or download the correct firmware package that fit your CID.
Super-CID makes you able to flash any firmware package etc.
Guide for Super-CID: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?

Find my post I will bump it in general
Sent from my HTC Sensation using xda premium

thekoopers said:
THANK YOU for the response but how do I do that if i can"t power my phone on since it just re boots?
I am on T Mobile USA. How do I know which Firmware Package to choose?
Click to expand...
Click to collapse
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App

namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767

namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...

namila007 said:
i think you have to retore your phone to stock if you cant log to hboot :/
if you can load to hboot then find the cid ( or just supercid -check my sig) then flash the correct firmware file
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
craven667 said:
Find my post I will bump it in general
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
I just found your post and i will try and follow your instructions to the tee...if I have a problem with anything I will ask you on your post.
Thanks, craven667

thekoopers said:
How do i restore to stock? I have already read the supercid but it does say phone has to be turned on and everytime i turn phone on it just turns off again then on..etc...
Click to expand...
Click to collapse
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?

gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
I will try what you said to do.
Thanks, gol_sol.
Very much appreciated.

gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
+1 10 char. I also do not suggest to flash an RUU.

gol_n_dal said:
You stated that your ROM was GB and that's not supported on the 3.32 F/W.
Download your ICS ROM and mike's SuperWipe script from the ARHD thread.
Copy them to the SDcard via the PC and a USB <-> microSD adapter.
Delete the PG58IMG.zip file on the SDcard.
Boot the phone into Bootloader, get into Recovery, SuperWipe and flash the ROM.
You also have a locked version (1.27.0000) of the HBOOT, I suggest at some stage installing an unlocked version (1.27.1100) from: http://forum.xda-developers.com/showthread.php?t=1459767
Click to expand...
Click to collapse
gol_n_dal said:
Don't bother restoring to stock, waste of effort.
Read my previous post.
1. Anyway, did the ICS F/W update work ?
2. Is the PG58IMG.zip file still on the SDcard ? If so rename /delete it.
3. Get your chosen ICS ROM and mike's SuperWipe script onto the SDcard.
4. Go into recovery and run the Superwipe script then flash the ROM.
Steps 2 & 3 you'll need to use a PC to do these with a USB <-> microSD adapter.
I am assuming that there wasn't a typo in your original post in that you actually have HBOOT 1.27.0000, this is ICS ONLY firmware and GB won't work on it.
BTW what recovery have you got ? CWM or 4EXT ?
Click to expand...
Click to collapse
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.

thekoopers said:
I just tried it and the phone is ON NOW BUT it is just on the White screen with the Green HTC letters. It has been on for 15 minutes already...By the way, I DO NOT have a microSD adapter. I did it by getting into CWM and going to Recovery and going into mounts and then i mounted it and was able to install it like that. Is that the reason why it is still on the White HTC screen? Do I pull the Battery?
Another thing I still haven't flashed my ICS Rom because when i DID Mike's SuperWipe it did it's thing and just automattically went to the White HTC screen.
No, there is NO TYPO, that is exactly what it says. I believe i still have CWM and I remember tthat I had 4ext to.
Click to expand...
Click to collapse
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.

gol_n_dal said:
So precisely what have you got on the SDcard at the moment ?
PG58IMG.zip ?
SuperWipe.zip (or what ever the name is) ?
ICS ROM "zip" file ?
Edit: If you used the superwipe script you have no OS on the phone and will NEED to flash an ICS ROM through recovery. It shouldn't have gone to the white HTC screen just returned to CWM. If you don't have an ICS ROM on the phone's SDcard you can try adb pushing it or possibly use another device that has microUSB capability.
Click to expand...
Click to collapse
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?

thekoopers said:
What I have now is Superwipe.zip and ICS ROM.zip. I deleted the PG58IMG that I had on the SD Card before I did the SUPERWIPE.
I pulled out the battery and got into recovery and installed from sdcard and I went to install ICS ROM and it started but then it said ABORTED. Tried again and said the same thing.
Should I try another ICS ROM?
What about not having the PG58IMG?
Click to expand...
Click to collapse
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk

musarraf172 said:
It seems that your ics ROM is corrupted. Did you check the md5sum of the ROM zip file?
Sent from my Sensation using Tapatalk
Click to expand...
Click to collapse
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172

thekoopers said:
I did not check that but I will Re-Flash and see if it works.
Thanks musarraf172
Click to expand...
Click to collapse
In stead of writing "Thanks" please hit the thanks button...

TMOUSA Sensation 4G help

Alright guys I got s-off and thats about it. I want ics on my phone but once I update to the nnewest firmware and flash an ics rom it stays stuck on white HTC screen. I've had to use RUU twice because I can't load a recovery without updating firmware and once i do that my phone does not boot. Anyone have any ideas on what I can do to get ics on my sensation 4g?

Make sure you get SuperCID so the firmware update goes through. If you don't have SuperCID then it can look like it updated but it actually fails.
Once you get the firmware flashed properly, you have to delete or rename the firmware zip from your SD card so that you can access recovery.

dallashigh said:
Make sure you get SuperCID so the firmware update goes through. If you don't have SuperCID then it can look like it updated but it actually fails.
Once you get the firmware flashed properly, you have to delete or rename the firmware zip from your SD card so that you can access recovery.
Click to expand...
Click to collapse
I did that. super cid to 11111111 and to the latest firmware even tried it with the patch. I am able to go into recovery but everytime I flash any rom it stays stuck on the white HTC screen after I boot it up.

Sounds like you might be one of those unlucky users. Have you tried this guide? http://forum.xda-developers.com/showthread.php?t=1542555

TopazUser1 said:
Alright guys I got s-off and thats about it. I want ics on my phone but once I update to the nnewest firmware and flash an ics rom it stays stuck on white HTC screen. I've had to use RUU twice because I can't load a recovery without updating firmware and once i do that my phone does not boot. Anyone have any ideas on what I can do to get ics on my sensation 4g?
Click to expand...
Click to collapse
The steps I used are...flash firmware 3.32 ,then superwipe( very important if coming from GB, then Rom this has seemed to work for me..
Also did you do a MD5 to check the file of the Rom to make sure it was the same?
Sent from my HTC Sensation 4G using XDA
---------- Post added at 10:38 PM ---------- Previous post was at 10:13 PM ----------
TopazUser1 said:
I did that. super cid to 11111111 and to the latest firmware even tried it with the patch. I am able to go into recovery but everytime I flash any Rom it stays stuck on the white HTC screen after I boot it up.
Click to expand...
Click to collapse
The problem with this might be which version of htc sense was cooked into the Rom you are using. If you are using a android 4.0.3 rom with sense 3.5 then you need firmware package 3.12 because sense 3.5 needs HBOOT 1.23, and sense 3.6 needs HBOOT 1.27 so you would use the 3.24, 3.30, 3.32 but again it all depends on what the chef has built from if the chef used a 3.5 sense in the rom then that might be your issue.
If not try to just start over, completely format your sd card, then put your rom, supersipe, and firmware on sd card.
1. install firmware from recovery once installed pull battery out and remove sd to take off the firmware file,
2. reinstall sd card, boot phone into recovery- go to install from zip and run the superwipe script once it finishes it will reboot into recovery.
3. then install the rom of your choosing and see if that works.
I use the energy rom series and flashed over from GB using the instructions i found in that forum, it does get confusing if you have not do it a million times....hope this helps ICS is awesome...

I want to super wipe but I'm not sure which one to download. Also guys, I'm on stock tmobile usa rom. No custom rom

TopazUser1 said:
I want to super wipe but I'm not sure which one to download. Also guys, I'm on stock tmobile usa rom. No custom rom
Click to expand...
Click to collapse
I used the super wipe from android revolution...u have to make sure it is a sensation superwipe though...if I were u I would head to the android development forum and there are step by step guides I have used android revolution and the energy Rom series both have pretty good instructions..pm if u need help it can get confusing...also when u flashed firmware were you still on stock GB Rom?
Sent from my HTC Sensation 4G using XDA

snoop101 said:
I used the super wipe from android revolution...u have to make sure it is a sensation superwipe though...if I were u I would head to the android development forum and there are step by step guides I have used android revolution and the energy Rom series both have pretty good instructions..pm if u need help it can get confusing...also when u flashed firmware were you still on stock GB Rom?
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?

TopazUser1 said:
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?
Click to expand...
Click to collapse
Stock is not needed.
You need to ensure that F/W and ROM are compatible. I.e. ICS 1.27.xxxx F/W WILL NOT work with a GB ROM, and GB 1.17.xxxx WILL NOT work with ICS.
Flash the F/W, if not already done. Can't remember what you are on.
SuperWipe (from Mike's ARHD thread).
Flash your chosen ICS ROM.
Pop out the SD card, reboot insert and then delete the PG58IMG.zip ONLY if you flashed the F/W.
Deep joy.

TopazUser1 said:
Yes I was. I was s-off and custom recovery. Am I not suppose to flash firmware over stock rom?
Click to expand...
Click to collapse
What Rom do u plan on using...if I knew that I could tell you exactly what firmware to flash, it dosent matter that u flash firmware over stock rom, but if the firmware isn't compatible then the phone won't boot up...
Sent from my HTC Sensation 4G using XDA

[Q] Multiple problems when flashing HTC Sensation with ARHD ROM

I decided to join the xda-developers community after I spent literally 9+ hours trying to get my phone to work and looking for the answers and couldn't find any for my situation. I am hoping an experienced user can give me some much needed answers!
The reason I am trying to flash the ROM in the first place is because I recently replaced the LCD/Digitizer from another HTC Sensation but for some reason I am not able to connect to T-Mobile network. I thought maybe it was the antennas and I had knocked something loose when I was repairing it when the WiFi wasn't working either, but when I took it to my parents house and used their WiFi it started working. So I decided to flash the the Android Revolution HD 7.2 ROM and followed the guide from http://forum.xda-developers.com/showthread.php?t=1192300. I followed the instructions and was able to do everything but the permanent root but I realized I could just flash the ARHD ROM and have it be rooted that way. I flashed the ROM and when it was done it got stuck at the beats audio screen. Then I realized I hadn't flashed the 3.33 firmware first and thought that was the problem so I went back and wiped partitions and data and flashed it to that and then flashed ARHD but it still got stuck at the beats audio logo. So I went and restored it to the backup I made on clockworkmod recovery but then it would just reboot to HTC logo constantly so I flashed to 3.33 again and it still does that same thing. I've flashed ARHD and 3.33 firmware multiple times and it either gets stuck on the beats audio logo or keeps rebooting from HTC. So now it's on 3.33 firmware and I'm leaving it there until someone can help me.
When I did the S-Off, in the beginning it said "revolutionary" at the top. When I flashed the ROM it said *LOCKED*. Now it says -Firmware-3.33-.
This is what it looks like on my HBOOT.
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.350431_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
What do I do next? I know for a fact that if I flash the ARHD ROM again it will get stuck on the beats audio logo. I can't even start the phone on the 3.33 firmware because it restarts over and over to HTC logo screen. Also does anyone think flashing to this new ROM will get my phone to connect to the network again?
PLEASE HELP!!

thisiisdaniel said:
I decided to join the xda-developers community after I spent literally 9+ hours trying to get my phone to work and looking for the answers and couldn't find any for my situation. I am hoping an experienced user can give me some much needed answers!
The reason I am trying to flash the ROM in the first place is because I recently replaced the LCD/Digitizer from another HTC Sensation but for some reason I am not able to connect to T-Mobile network. I thought maybe it was the antennas and I had knocked something loose when I was repairing it when the WiFi wasn't working either, but when I took it to my parents house and used their WiFi it started working. So I decided to flash the the Android Revolution HD 7.2 ROM and followed the guide from http://forum.xda-developers.com/showthread.php?t=1192300. I followed the instructions and was able to do everything but the permanent root but I realized I could just flash the ARHD ROM and have it be rooted that way. I flashed the ROM and when it was done it got stuck at the beats audio screen. Then I realized I hadn't flashed the 3.33 firmware first and thought that was the problem so I went back and wiped partitions and data and flashed it to that and then flashed ARHD but it still got stuck at the beats audio logo. So I went and restored it to the backup I made on clockworkmod recovery but then it would just reboot to HTC logo constantly so I flashed to 3.33 again and it still does that same thing. I've flashed ARHD and 3.33 firmware multiple times and it either gets stuck on the beats audio logo or keeps rebooting from HTC. So now it's on 3.33 firmware and I'm leaving it there until someone can help me.
When I did the S-Off, in the beginning it said "revolutionary" at the top. When I flashed the ROM it said *LOCKED*. Now it says -Firmware-3.33-.
This is what it looks like on my HBOOT.
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.350431_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot
What do I do next? I know for a fact that if I flash the ARHD ROM again it will get stuck on the beats audio logo. I can't even start the phone on the 3.33 firmware because it restarts over and over to HTC logo screen. Also does anyone think flashing to this new ROM will get my phone to connect to the network again?
PLEASE HELP!!
Click to expand...
Click to collapse
I'm having the same problem my HBOOT was 1.17.111 and needed 1.27 to install elegancia mod.so i was reading and it said i needed the 3.33 FW so i updated it and i'm now stuck just like you.

Joethelegend said:
I'm having the same problem my HBOOT was 1.17.111 and needed 1.27 to install elegancia mod.so i was reading and it said i needed the 3.33 FW so i updated it and i'm now stuck just like you.
Click to expand...
Click to collapse
I only needed to flash to 3.33 was because it was for Android Revolution HD. I'm not sure if you need to do that for the elegancia mod.

How did you update the firmware? Did you use the PG58IMG.zip method and if so have you removed it from your SD card afterwards? I know ARHD is best used with 4ext recovery too but i'm not sure it's a necessity. Check out this thread. There maybe some info on it.
http://forum.xda-developers.com/showthread.php?t=1472298

thisiisdaniel said:
I only needed to flash to 3.33 was because it was for Android Revolution HD. I'm not sure if you need to do that for the elegancia mod.
Click to expand...
Click to collapse
try to flash the 3.33fw from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
before flashing check md5 sums(it is important)
and follow the installation steps carefully
after that flash the rom
if fails again then flash the boot.img of the rom manually
if don't know how see extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861

3484jacks said:
How did you update the firmware? Did you use the PG58IMG.zip method and if so have you removed it from your SD card afterwards? I know ARHD is best used with 4ext recovery too but i'm not sure it's a necessity. Check out this thread. There maybe some info on it.
http://forum.xda-developers.com/showthread.php?t=1472298
Click to expand...
Click to collapse
I used the zip method and I did remove it afterwards. I am using the clockworkmod recovery instead of the 4ext.

rzr86 said:
try to flash the 3.33fw from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
before flashing check md5 sums(it is important)
and follow the installation steps carefully
after that flash the rom
if fails again then flash the boot.img of the rom manually
if don't know how see extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
Sorry for being a noob but how do I check md5 sums? What do I compare the sums too? And also, why is it important to check?

thisiisdaniel said:
Sorry for being a noob but how do I check md5 sums? What do I compare the sums too? And also, why is it important to check?
Click to expand...
Click to collapse
put the firmware zip in the root of the sdcard
use any file manager and navigate to that zip
press and hold to the zip until it pops up a menu
go to proprerties
then you will see calculate md5 checksum or something like that
then check if it is the same with the one from the firmware thread
it is important because if you mess up with fw probably you will damage your device

rzr86 said:
put the firmware zip in the root of the sdcard
use any file manager and navigate to that zip
press and hold to the zip until it pops up a menu
go to proprerties
then you will see calculate md5 checksum or something like that
then check if it is the same with the one from the firmware thread
it is important because if you mess up with fw probably you will damage your device
Click to expand...
Click to collapse
I can't access the zip because I can't start up the phone. Is there any other way of checking md5 sums?

thisiisdaniel said:
I can't access the zip because I can't start up the phone. Is there any other way of checking md5 sums?
Click to expand...
Click to collapse
Hi,
MD5 is checked in recovery.
What recovery do you have?

thisiisdaniel said:
I can't access the zip because I can't start up the phone. Is there any other way of checking md5 sums?
Click to expand...
Click to collapse
no i don't know other way
if someone else knows pls post
edit:maybru has right
i didn't think it at all

malybru said:
Hi,
MD5 is checked in recovery.
What recovery do you have?
Click to expand...
Click to collapse
I have clockworkmod recovery.

thisiisdaniel said:
I have clockworkmod recovery.
Click to expand...
Click to collapse
Hi,
That is odd.
You say you have flashed ARHD ROM.
That should install 4 EXT recovery.
So,that means the flash did not work.
Have you actually had a ROM working on your phone since you changed the digitizer?
Also,there is a md5 checksum checker in 4 EXT.
Have a look around the CWM recovery,to see if there is one there.

How do I check md5 sums from recovery?

malybru said:
Hi,
That is odd.
You say you have flashed ARHD ROM.
That should install 4 EXT recovery.
So,that means the flash did not work.
Have you actually had a ROM working on your phone since you changed the digitizer?
Also,there is a md5 checksum checker in 4 EXT.
Have a look around the CWM recovery,to see if there is one there.
Click to expand...
Click to collapse
I haven't been able to get my phone past the HTC logo after 3.33 and up to the beats logo after ARHD.

thisiisdaniel said:
I haven't been able to get my phone past the HTC logo after 3.33 and up to the beats logo after ARHD.
Click to expand...
Click to collapse
Hi,
With your s-off status and current 3.33 firmware,there is no reason why it should not work.
Maybe ,the phone was not re-assembled properly?
Or did it work before the 3.33 firmware installation?

rzr86 said:
try to flash the 3.33fw from this thread
http://forum.xda-developers.com/showthread.php?t=1459767
before flashing check md5 sums(it is important)
and follow the installation steps carefully
after that flash the rom
if fails again then flash the boot.img of the rom manually
if don't know how see extra 1 step from here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
I flashed from the thread you mentioned but it still does the bootloop..

malybru said:
Hi,
With your s-off status and current 3.33 firmware,there is no reason why it should not work.
Maybe ,the phone was not re-assembled properly?
Or did it work before the 3.33 firmware installation?
Click to expand...
Click to collapse
Yeah it was working before I did the firmware installation but the only thing was that it was not connecting to the network. What do I do??

thisiisdaniel said:
Yeah it was working before I did the firmware installation but the only thing was that it was not connecting to the network. What do I do??
Click to expand...
Click to collapse
Hi,
OK.
Let's go about this a different way.
Look HERE
2. Flashing a recovery
1.Flash 4 EXT recovery.
2.Go into 4 EXT recovery/wipe/ and format all partitions except sd card.
3.Flash ARHD ROM again.
The firmware is not preventing the installation of the software.
But using a different recovery,and wiping properly ,may get the ball rolling again.
Once you get the ROM up and running,you can look at the radio/ril combination.

thisiisdaniel said:
Yeah it was working before I did the firmware installation but the only thing was that it was not connecting to the network. What do I do??
Click to expand...
Click to collapse
try to change recovery
use 4ext
then from recovery format all partitions except sdcard
flash the rom
see how it goes