Hi,
I just update to 4.0.3 and did full wipe. but I always stuck at boot loops and it restart again and again. I try a lot of things, i find that, if it connected with PC and I run fastboot, it can get into home screen and works good. But i am unplug usb, it will crash and restart, stuck at boot loops.
Can anyone help on this? Thanks!
Which ICS ROM?
Sent from my Xoom using XDA App
4.0.3 official
Related
hi i haw such a problem. bricked my desire, and need anny suggestions :/
it happened when i tryed to push a custom framework-res.apk i did it by pushing it throu adb. it was this one "smooth-sense-1.0-1.0c.zip" from desire section. and im using "Official" Froyo HTC Sense ROM 1.0c.
after i pushed it to my desire i rebooted it and everything seemed to be ok. device loaded but when came the screen to unlock it had some google errors and restarted to load screen and booted again to lock screen and so on and so on.
so i decided to wipe all data and reinstall "Official" Froyo HTC Sense ROM 1.0c. so i did it. everything seemed to be ok, i restarted my device, it started o load, loaded to boot screen, but thats all.
so i tryed to reinstal the same rom and radio :/ when i tryed to install radio device just shuted down.
after that my desire dount even loud up to boot screen, it only turns on to white screen with HTC letters on it, and restarts.
when i turn it with volume down it turns on to recovery. when i pick up recovery and pres power button to select it it turns to that screen with red !, but when i try to turn on recovery menu from my pc with recovery-windows.bat nothing happens :/
so thats my big problem, maybe anyone could help me with it? :/
i mannaged to turn my desire back on. now it runs on android 2.1-update1 rom.
but now there is no network connection, no sd card connection and no usb connection. anny sollutions?
and one more thing. :/ i cant turn off my desire. when i turn it off, phone turns back on again :/ when conncted to usb.
sounds like you've done the USB brick. check out the thread at modaco for a solution.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
that might help you.
fixed damn it took some nerves
I just finished downloading and installing android ICS (4.0). After I turn on my phone (HTC Sensation XE) again, the touchscreen isn't working anymore. I can't type in my pin-code.
I can't connect my phone to the computer because it is set on charge.
Does anybody know what I have to do? thanx
Power off, reboot into bootloader and then recovery, and flash a new ROM or restore a nand...
Hello,
I have the same problem with my phone. After using recovery is doenst work either.
Can you explain more how to handle? What do is see when i use recovery and how long does ik take?
Its fixed. It seems that it was stuck and just needed that extra kick with another ROM. Not really sure what the hell happened but its working fine now.
Please delete post.
Yesterday I plugged the HOS into my laptop and it started to act a little weird. It wouldn't show the SDcard but it allowed me to open it. I copied a new ROM to it and installed it. Since I did this, the phone will not work. Once it boots, it just freezes and reboots when I try and do anything. The nand allows me to boot and scroll through the home screens, but if I try and do anything else it freezes and reboots. I can't install any other ROM that's not sense base like AOKP or MIUI as they just boot loop. I can get to recovery and the boot loader no problem.
Update: I can boot a stock nand and get into the app drawer. But, once I click on an app or pull down the notification bar it freezes.
Update 2: Was able to get the cyan alpha to install after a good 5 minutes of bootloops and it runs perfect. WTF is going on here?? haha
Can anyone give me any suggestions to try? Thanks for any help that you can provide me.
Hi,
So my SGS2 Skyrocket is stuck in a boot loop. I've have the Sky Icecream Sandwich ROM installed for a few months now, and haven't changed anything recently.
What is happening is my phone with vibrate every 2-3 seconds with a blank screen. When I take out the battery/power source, and put it back in, the phone shows the Samsung splash (not the Android splash) for a few seconds, then goes blank and does the vibrating again.
I've tried plugging it into the computer, but the power it gets from USB turns it on and into the boot loop, so I can't get it into any kind of recovery mode. I also tried the Vol+Home+Power key combo, with nothing.
Any idea what could cause this/what the course of action should be? Thanks!
Turn phone on and wait 2 hours. If it wont work do what you use to do when you booting recovery mode. (home screen i guess). But hold it longer.
Good luck
nathan-96, do you have any idea what caused this? Because what's concerning me is that it's not getting past the Samsung icon (before android starts actually booting).
When you say turn it on, do you mean just put in the battery? Because the loop starts right when I put the battery in, it doesn't wait for me to press anything.
No, I meant turning it on. Hold centre button and put battery in. Just hold it for a moment. Hopefully you will reach recovery.
Sent from my GT-S5660 using xda premium
Can you access download mode instead of recovery? If so you could try re flashing something with Odin...
Definitely try getting the battery out for a few minutes and boot the phone while maintaining the combination to enter recovery
Sent from my GT-I9100 using xda premium
boot loop samsung galaxy s2 skyrocket
nathan-96 said:
Turn phone on and wait 2 hours. If it wont work do what you use to do when you booting recovery mode. (home screen i guess). But hold it longer.
Good luck
Click to expand...
Click to collapse
so i have a question, im having the same problem (obviously) but my cwm wont work and says something about md5 check sum and verfication? i dont know what the problem is but if the 2 hour thing doesnt work i at least need cmw to work so i can then at least install my custom rom to have my phone working. can you help? thanks
Possible a bad download...
You have CWM on your phone? Have you visited the forum for your device?
http://forum.xda-developers.com/forumdisplay.php?f=1399
technologic337 said:
so i have a question, im having the same problem (obviously) but my cwm wont work and says something about md5 check sum and verfication? i dont know what the problem is but if the 2 hour thing doesnt work i at least need cmw to work so i can then at least install my custom rom to have my phone working. can you help? thanks
Click to expand...
Click to collapse
AT&T Skyrocket BOOT LOOP Cyanongenmod 10
Hi ,
I´am playing with my Skyrocket to run the Cyanogenmod 10 and always I got stuck at Boot Loop .
This is what I have and did :
- Running AT&T Stock ICS 4.0.4 UCFL6 rooted ( I have a back up of this)
- CWM 6.0.1
- Cyanogenmod 10 Nightly Dec 07 , but I also tried with Cyanogenmod 10 Stable
- Gapps
- Factory Reset / wipe cache
- Wipe dalvik
- Mount/storage format system
- install using CWM Cyanogenmod
- install using CWM gapps
- Mount/ storage format cache
- reboot
I also tried to wipe twice as other threads say.
So I´am still with the boot loop
I returned my backup to the ICS ...
Thanks in advance !!!
Skyrocket Bootloop
Whats happening is the power button acts as if its being pressed. Thats why you have the bootloop and the phone turns on as soon as you put the battery in.
Try repeating pressing the power button or hold the power button without the battery for a few seconds. :fingers-crossed:
I'm having an unusual problem for me I've not came across this before, I can get my tab 2 - 5110 to boot into download mode but not recovery mode, It will boot to the rom normally when I shut it down completely to the charge battery animation will it boot up normally. If I try restarting the tablet by holding in the power button then releasing it at the samsung logo it just goes to a blank black screen also kies nor odin recognises my tablet its a very unusuall problem for me and I've tried everything I know to try fix it but with no success so far, I was running phils touch recovery and brolees 3.0 themed rom, my tablet worked perfectly until I tried to install brolees 4.0 over the top of his previous one the 3.0 which I thought would have been straight forward, at first it wouldn't get past the samsung logo but I worked out if I can get it to shut down to the charge battery animation it will boot normally but it reloads the apps everytime, anyhoo if anyone has had a similar issue or knows what stupid mistake ive made I would really appreciate any help, thank you in advance!
I cannot get my gt2 10 to boot and keep recovery
Sent from my GT-P5113 using Tapatalk 4