[Q] Android 4.0 screen problem - HTC Sensation

I just finished downloading and installing android ICS (4.0). After I turn on my phone (HTC Sensation XE) again, the touchscreen isn't working anymore. I can't type in my pin-code.
I can't connect my phone to the computer because it is set on charge.
Does anybody know what I have to do? thanx

Power off, reboot into bootloader and then recovery, and flash a new ROM or restore a nand...

Hello,
I have the same problem with my phone. After using recovery is doenst work either.
Can you explain more how to handle? What do is see when i use recovery and how long does ik take?

Related

bricked my desire, need help :/

hi i haw such a problem. bricked my desire, and need anny suggestions :/
it happened when i tryed to push a custom framework-res.apk i did it by pushing it throu adb. it was this one "smooth-sense-1.0-1.0c.zip" from desire section. and im using "Official" Froyo HTC Sense ROM 1.0c.
after i pushed it to my desire i rebooted it and everything seemed to be ok. device loaded but when came the screen to unlock it had some google errors and restarted to load screen and booted again to lock screen and so on and so on.
so i decided to wipe all data and reinstall "Official" Froyo HTC Sense ROM 1.0c. so i did it. everything seemed to be ok, i restarted my device, it started o load, loaded to boot screen, but thats all.
so i tryed to reinstal the same rom and radio :/ when i tryed to install radio device just shuted down.
after that my desire dount even loud up to boot screen, it only turns on to white screen with HTC letters on it, and restarts.
when i turn it with volume down it turns on to recovery. when i pick up recovery and pres power button to select it it turns to that screen with red !, but when i try to turn on recovery menu from my pc with recovery-windows.bat nothing happens :/
so thats my big problem, maybe anyone could help me with it? :/
i mannaged to turn my desire back on. now it runs on android 2.1-update1 rom.
but now there is no network connection, no sd card connection and no usb connection. anny sollutions?
and one more thing. :/ i cant turn off my desire. when i turn it off, phone turns back on again :/ when conncted to usb.
sounds like you've done the USB brick. check out the thread at modaco for a solution.
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
that might help you.
fixed damn it took some nerves

[Resolved] [Q] HTC p3600 stuck with white screen

Greetings all !!!
I'm a windows mobile user....I'm using an htc p3600 trinity.
I've never had trouble updating my phone's rom, untill yesterday!!!
Usually i just connect the phone thru usb cable and use the Rom Update Utility.
But this time
I copied the 'SSPL-TRIN' file to the device and ran it from the phone.
Sadly it hanged at the red-blue-green screen. No matter how many times i tried resetting the phone(soft reset), it showed the same.
I then ran a working Rom Update Utility(RUU) and it showed the updating process from 1- 100 %.
After completion, it now shows the htc pic ( as it normally does when starting) and then it shows me only a white screen!!!
I've tried using RUU, but no use! The phone doesnt even detect up on the activesync (using win XP)
Plzzzzzz gimme advice bcos i love this phone and dont want to get another one!!!!!
If you can get to htc screen, then you can get into recovery console. Do that, then wipe data/factory reset. That should fix the problem.
Its been a while but it finally worked Alhamdulillah(praise to God)
All i needed was to get to the bootloader screen.
I installed windows mobile device center(previously known as activesync)
on my windows 7 .
I pressed and hold the 3 buttons shown in the pic attached, and it got me to
the bootloader screen( the one with red,green,blue bars).
Then i ran the official rom update for my htc p3600 (downloaded from htc's website).
And to God's grace, it started updating and i got back my phone.
If this post has helped anyone of you, plz click on 'thanks ' on this post!!
Any help on further explainations...contact or pm me!

[Q] T-mobile HTC HD2 ROM issues, lots of details.

Hey everyone I am having some trouble with my friends HD2.
He installed HSPL3 with 2.08.hspl
Then Magldr 1.10
Then installed android 2.2 ROM
Everything worked fine, made phone calls, texts, all that except 3g didn't work but I am assuming that was because he didn't install a radio?
Now, heres where I am stuck.
He told me he used the phone for awhile without 3g.
Yesterday he turned off the phone before school and turned it on after school.
-The phone started to fail to boot up in multiple ways
-It sat at the stick together screen
-Got to MAGLDR 123456 go go go (would get stuck there sometimes)
-Got fully booted up and would search for a signal and freeze
-Or it would fully boot up and work normally until he had to restart it again
Now he told me this is what he did when he got home from school
-He opened magldr and did a usb flash
-opened bootloader and tried to reinstall android
-got two errors
-could no longer boot passed Magldr
I recommended he switched back to a shipped ROM from t-mobile it was the (3.14 update)
He told me he tried it, got to 8% and failed, and now he gets an error along the lines of:
-software update failed please try again
He gets that whenever the phone started up.
Now I said oh lord that sucks, now I have the phone.
-The phone is still on 2.08 hspl
-magldr 1.10 still installed
-Just did a USB flash
What do I do? I have tried looking at guides to install android but seeing as how there is no ROM on the phone anymore I can't do an SD install.
How do I tell if my phone is 512mb or 1024mb?
Is the phone bricked?
I currently have the Android 2.2 that my friend installed on the phone installed on this computer should I continue to use that?

[Q] Help! I bricked my HTC Titan

I have tied to update my HTC Titan (Vodafone branded) to Tango with Zune via the disconnect trick. I updated with success to 8112 version but when updating to 8173 the phone entered in an endless loop at the restart (after reaching the vodafone logo screen it reboot again).
My phone was not unlocked.
Please give me some suggestion on how to recover.
Thanks
Pacone93 said:
I have tied to update my HTC Titan (Vodafone branded) to Tango with Zune via the disconnect trick. I updated with success to 8112 version but when updating to 8173 the phone entered in an endless loop at the restart (after reaching the vodafone logo screen it reboot again).
My phone was not unlocked.
Please give me some suggestion on how to recover.
Thanks
Click to expand...
Click to collapse
If you can enter the boot loader i.e. pressing vol+ and vol- together with power on, then just flash a stock ROM from Eternity thread.
Thanks,
I dowloaded one of the stock rom i found and tried to flash it with the ROMUpdateUtility but I got the invalid Vender ID. I will try with another stock ROM before going to HTC for repair.
Try to flash stock Vodafone rom.
Where I can find it?
Did you ever try just reverting the update attempt? Zune automatically creates a backup (more properly, a "restore point") before installing an update. To put the phone in recovery mode, turn it off, then hold the Camera button fully and turn it on. The phone will boot straight to the black&white update screen, which is alo used for recovery. Start the Zune software and connect your phone via USB, and Zune should offer to restore the phone for you. Much less hassle and data loss than a new ROM would be.
Thanks,
Done but Zune give an error saying it has no restore point.
Perhaps I I did the upgrade via Zune as guest.
Here you can find all the Titan ROMS I know ...
http://www.filefactory.com/f/db553db625fe2273/
Could you paste the name of the ROM you already tried to flash ?
I have tried the following ROMs:
IMG_Eternity_HTC_Europe_1.08.401.06_Radio_16.23.02.09_2_16.24.00.23U_Signed_ETERNITY_RELEASE.nbh
IMG_Eternity_HTC_Europe_1.09.401.02_Radio_16.23.02.09_A_16.24.00.23_Signed_ETERNITY_RELEASE.nbh
IMG_Eternity_HTC_Europe_2.01.401.04_Radio_16.23.03.17_16.27.00.23_Signed_ETERNITY_RELEASE.nbh
Any Help?

Does my Sensation have a hardware damage?

Hello,
my Sensation just stopped working. While using the phone it rebboted and I can't boot the phone anymore. I had CM-10.2 | AOSP 4.3.1 Jellybean [KANG] [Oct-28] from albinoman installed. It worked for month withou any problem.
If I start the phone, I see the HTC logo, then the cyanogen loading sequence appears but after some seconds it stops loading. I can't even go to recovery. The first recovery menu (choosing fastboot, recovery, factory reset...) can be loadad. If I choose recovery the 4ext recovery touch boot logo appears but also disappears after some seconds. I also tried factory reset, but it seems not to reset, the HTC logo appears for several minutes without any change.
Because of these problems I think it must be a hardware failure. What do you think? Can I triy enything else? I don't wanna loose my beloved Sensation
dbsoundz said:
Hello,
my Sensation just stopped working. While using the phone it rebboted and I can't boot the phone anymore. I had CM-10.2 | AOSP 4.3.1 Jellybean [KANG] [Oct-28] from albinoman installed. It worked for month withou any problem.
If I start the phone, I see the HTC logo, then the cyanogen loading sequence appears but after some seconds it stops loading. I can't even go to recovery. The first recovery menu (choosing fastboot, recovery, factory reset...) can be loadad. If I choose recovery the 4ext recovery touch boot logo appears but also disappears after some seconds. I also tried factory reset, but it seems not to reset, the HTC logo appears for several minutes without any change.
Because of these problems I think it must be a hardware failure. What do you think? Can I triy enything else? I don't wanna loose my beloved Sensation
Click to expand...
Click to collapse
try this one
from bootloader connect the device in fastboot mode to pc
open a cmd window in your adb and fastboot folder and type
fastboot reboot recovery
dbsoundz said:
Hello,
my Sensation just stopped working. While using the phone it rebboted and I can't boot the phone anymore. I had CM-10.2 | AOSP 4.3.1 Jellybean [KANG] [Oct-28] from albinoman installed. It worked for month withou any problem.
If I start the phone, I see the HTC logo, then the cyanogen loading sequence appears but after some seconds it stops loading. I can't even go to recovery. The first recovery menu (choosing fastboot, recovery, factory reset...) can be loadad. If I choose recovery the 4ext recovery touch boot logo appears but also disappears after some seconds. I also tried factory reset, but it seems not to reset, the HTC logo appears for several minutes without any change.
Because of these problems I think it must be a hardware failure. What do you think? Can I triy enything else? I don't wanna loose my beloved Sensation
Click to expand...
Click to collapse
Try running a RUU. Are you s-on or s-off?
Now it stopped working... I can't even turn it on. Charging doesn't work... R.I.P. ?
dbsoundz said:
Now it stopped working... I can't even turn it on. Charging doesn't work... R.I.P. ?
Click to expand...
Click to collapse
remove battery,sim and sdcard and charge it as it is for 4-5 hours
put them back and switch it on
best wishes
rzr86 said:
remove battery,sim and sdcard and charge it as it is for 4-5 hours
put them back and switch it on
best wishes
Click to expand...
Click to collapse
Hello and thanks for reply.. but why charging without battery?!
dbsoundz said:
Hello and thanks for reply.. but why charging without battery?!
Click to expand...
Click to collapse
it charges the device internally somehow and somewhere
unfortunately i don't remember where

Categories

Resources