Database Info

[Q] Pls hept me i break my samsung galaxy sl i9003

i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((

you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?

Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*

Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)

umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are

supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003

Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps

add me on messenger sp8ky1 , maybe i could explain(in romanian)

umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...

i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....

Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?

Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310

Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.

Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.

[Q] My SGY stucks at logo screen. What should I do?

my samsung galaxy hangs and stucks at logo screen..
cant even use recovery mode or the bootloader (voldown+home+power key)
this happened after i installed Repencis v3.0 beginner without CWM
what should I do now
this was posted on samsung galaxy y thread but someone told me to post it also here T_T

iamryllev22 said:
my samsung galaxy hangs and stucks at logo screen..
cant even use recovery mode or the bootloader (voldown+home+power key)
this happened after i installed Repencis v3.0 beginner without CWM
what should I do now
this was posted on samsung galaxy y thread but someone told me to post it also here T_T
Click to expand...
Click to collapse
I did the same thing with a friend's phone.
Find ur stock rom here :
forum.xda-developers.com/showthread.php?t=1465800
Then download Odin Multi Downloader and the same post above has a flashing guide at the end.
Don't worry. I got it working. You'll have to reroot though

I've done that many times on my original galaxy s. Just reflash with Odin and it'll be fine, don't worry.
Sent from my GT-I9300 using xda premium

[Q] Help with Samsung galaxy s duos S7652

hi guys. been looking all over for something i can do with samsung galaxy s duos? can i root it? can i flash samsung galxy s roms on it?? thanks for the replies..:good:
sorry.. seems like i did not search hard enough... found what i need... how can i delete this thread??

Try this ROM: http://forum.xda-developers.com/showthread.php?t=2087177
Cheers,
C.

Need Help Phone is Dead after installin CW Recovery 6
Guys need help ......Please help me .. My phone become dead after i install CW Recovery 6....... I was using Kyle Open ROM 3.4.... What should i do to restatr that...

samsung galaxy s duos gt-s7562 bootloop
i have samsung galaxy s duos gt-s7562. it still not rooted. unfortunately accidently its battery was pulled out wile it official updating since then it in a bootloop i tried to slove it by odin 3.07 and S7562XXBMJ1_S7562ODDBMJ1_S7562DDBMJ1_HOME.tar.md5 but still its not working .please help me out i cant understand what to do...

Need Help Phone is Dead after installin CW Recovery 6
patnaik.mohan said:
Guys need help ......Please help me .. My phone become dead after i install CW Recovery 6....... I was using Kyle Open ROM 3.4.... What should i do to restatr that...
Click to expand...
Click to collapse
First Of All Check It Out That Your Phone Is Actually Dead Or Not By Connecting Your Phone In Charging, Wait For Few Seconds If Screen Is Not Showing That Charging Then........... Its Dead And There Is No Way To Restart The Phone.
Go To Nearest Samsung Service Centre.....!!
---------- Post added at 08:34 PM ---------- Previous post was at 08:21 PM ----------
souviktherocker said:
i have samsung galaxy s duos gt-s7562. it still not rooted. unfortunately accidently its battery was pulled out wile it official updating since then it in a bootloop i tried to slove it by odin 3.07 and S7562XXBMJ1_S7562ODDBMJ1_S7562DDBMJ1_HOME.tar.md5 but still its not working .please help me out i cant understand what to do...
Click to expand...
Click to collapse
install cwm den wipe data cache... also wipe dalvik cache...n den start ur phone... it will boot up... first boot will take upto 5 mins to start...
dont forget to press thanks!

bHarat33 said:
First Of All Check It Out That Your Phone Is Actually Dead Or Not By Connecting Your Phone In Charging, Wait For Few Seconds If Screen Is Not Showing That Charging Then........... Its Dead And There Is No Way To Restart The Phone.
Go To Nearest Samsung Service Centre.....!!
---------- Post added at 08:34 PM ---------- Previous post was at 08:21 PM ----------
install cwm den wipe data cache... also wipe dalvik cache...n den start ur phone... it will boot up... first boot will take upto 5 mins to start...
dont forget to press thanks!
Click to expand...
Click to collapse
i tried that too but it always shows failed...i download the root toolkit from http://d-h.st/BtL....:crying: sending a pic of odin...

[q] [help] gt-i9082l

Good day all
I have a Samsung Galaxy Grand I9082L that i want to root.
I have searched the forum and found this thread http://forum.xda-developers.com/showthread.php?t=2234975 but i wanted to know (to avoid bricking my device) if this is correct procedure and software for my phone version specifically
My baseband is I9082LUBAMA6
Build Number JZO54K.I9082LUBAMA8
I wanted to know if the software and procedure used differs for the each baseband and/or build number or it is constant once it's the L version of the I9082
I am new at this sorry
Thanks alot

legend2nr said:
Good day all
I have a Samsung Galaxy Grand I9082L that i want to root.
I have searched the forum and found this thread http://forum.xda-developers.com/showthread.php?t=2234975 but i wanted to know (to avoid bricking my device) if this is correct procedure and software for my phone version specifically
My baseband is I9082LUBAMA6
Build Number JZO54K.I9082LUBAMA8
I wanted to know if the software and procedure used differs for the each baseband and/or build number or it is constant once it's the L version of the I9082
I am new at this sorry
Thanks alot
Click to expand...
Click to collapse
please help

Just do it the same as i9082 process. U cant brick it if u follow the steps. Install cwm tru odin. Dun let it boot up once "pass" appeared in odin. Pull battery out once "pass" is lighted up. Put back in the battery. Press power + home + vol up. Release power only when u see the gt i9082l logo. U will enter cwm. Install fixrecovery.zip then install superuser v 1.25.zip then reboot and yur good to go. Make sure the zip files are in yur external sd card before u flash cwm tru odin.
Sent from my GT-I9082L using Tapatalk 2

hayabusa08 said:
Just do it the same as i9082 process. U cant brick it if u follow the steps. Install cwm tru odin. Dun let it boot up once "pass" appeared in odin. Pull battery out once "pass" is lighted up. Put back in the battery. Press power + home + vol up. Release power only when u see the gt i9082l logo. U will enter cwm. Install fixrecovery.zip then install superuser v 1.25.zip then reboot and yur good to go. Make sure the zip files are in yur external sd card before u flash cwm tru odin.
Sent from my GT-I9082L using Tapatalk 2
Click to expand...
Click to collapse
Thanks alot for the info

Pleasure
Sent from my GT-I9082L using Tapatalk 2

unable to hear any thing while calling some one
hi,
i have installed gennxt_i9082XXUBMGA custom rom in my phone every thing work perfectly but when i call some one i can hear only the connecting sound after i cant hear ringing tone or the other person voice
after rebooting it work fine for first 2 call then the problem start again
i have installed "sound about" but it does not help
please help me

[Completed] [Q] Galaxy S3 AT&T Stuck at logo

Hello my S3 is stuck at logo after installing a app and rebooting i tried clearing cache and formating in recovery mode i tried downloading a new firmware with odin it didnt work ive tried and looked at many forms on this site and couldnt get anything to work and my phone is rooted any idea's ? btw im kinda nub at this so i need simple explaining

ththe22 said:
Hello my S3 is stuck at logo after installing a app and rebooting i tried clearing cache and formating in recovery mode i tried downloading a new firmware with odin it didnt work ive tried and looked at many forms on this site and couldnt get anything to work and my phone is rooted any idea's ? btw im kinda nub at this so i need simple explaining
Click to expand...
Click to collapse
what's the name of the app ? are you have CWM ? or AnyRecovery ? what was your rom ?

imostfa said:
what's the name of the app ? are you have CWM ? or AnyRecovery ? what was your rom ?
Click to expand...
Click to collapse
the app was chainfire3D I dont have Cwm or any recovery i downloaded some for my phone but it didnt work is for the rom i dont remember the name i had it for almost a year now

ththe22 said:
Hello my S3 is stuck at logo after installing a app and rebooting i tried clearing cache and formating in recovery mode i tried downloading a new firmware with odin it didnt work ive tried and looked at many forms on this site and couldnt get anything to work and my phone is rooted any idea's ? btw im kinda nub at this so i need simple explaining
Click to expand...
Click to collapse
ththe22 said:
the app was chainfire3D I dont have Cwm or any recovery i downloaded some for my phone but it didnt work is for the rom i dont remember the name i had it for almost a year now
Click to expand...
Click to collapse
Boot into the Stock Recovery, and Factory reset. I would also suggest fully Rooting, and installing a Custom Recovery if you are going to be modding your device. It will greatly simplify things for you. It will also give you the safety of having a Nandroid Backup in case things go wrong.
[HOW-TO] The All-In-One Backup/Root/Flash Guide & Bootloader Support
Location ★ ☆ ✰ STICKY ROLL-UP THREAD AT&T Galaxy S III
How to Root the Samsung Galaxy S3

i tried to turn it on this time and it changed to fireware upgrade encountered an issue Please select recovery mode in kies & try again so i got kies and installed all the drivers its just stuck on connecting.

ththe22 said:
i tried to turn it on this time and it changed to fireware upgrade encountered an issue Please select recovery mode in kies & try again so i got kies and installed all the drivers its just stuck on connecting.
Click to expand...
Click to collapse
The first thing you should do is try a different USB Cable, and USB Port. You can also check out the thread HERE. There is another HERE, and THIS one. One major thing to keep in mind always. Is to read, read, and read some more before doing anything.