Database Info

[Q] Pls hept me i break my samsung galaxy sl i9003

i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((

you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?

Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*

Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)

umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are

supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003

Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps

add me on messenger sp8ky1 , maybe i could explain(in romanian)

umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...

i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....

Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?

Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310

Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.

Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.

[Q] bricked gt-s5670

my galaxy fit is not booting normally or in recovery mode.it is going into download mode and ramdump mode.i have flashed it many time with the official firmware from sammobile.com after this problem but no luck.previously i had installed the cyanogen mod 10.1 rom in it.
cm-10.1-20130309-NIGHTLY-beni
"http://forum.xda-developers.com/showthread.php?t=2075503"
i got a video in youtube showing the same problem which i have for galaxy pop... " https://www.youtube.com/watch?v=VppXy6_1sAw "
i would be very thankful to anyone who can come up with a solution or help
my email id [email protected]

What error are u facing in Odin?

Galaxy_Rohit said:
What error are u facing in Odin?
Click to expand...
Click to collapse
while flashing in odin I get no erros the device flashes successfully but when the device starts after flashing the screen starts blinking neither it would go into recovery nor normally boot.....no blinking of screen in downloading mode or arm9 mode

Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.

Galaxy_Rohit said:
Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.
Click to expand...
Click to collapse
I have tried flashing froyo...i dont have the one package but different files.still no luck .even tried to install the clockwork mode recovery but it isnt even entering into recovery.if u can give me the download links to your file I can try flashing them.

Install this Samsung USB Driver on pc.
Note:-
*Use Odin v4.42
*Rename ops file exactly as "BENI_v1.0.ops"(without quotes)...(might b case sensitive, so be careful)
Goto download mode by keep pressing & holding Volume Down+Home+Power Buttons together until the phone turn on in "Downloading" mode.
First, flash Galaxy Fit Froyo 2.2.1(ddkb1)
Procedure:
OPS: BENI_v1.0.ops
BOOT: APBOOT......
PHONE: MODEM.....
PDA: CODE......
CSC: CSC......
Click "Start".:thumbup:
& then flash Galaxy Fit Gingerbread 2.3.6(ddkt3)
Procedure:
OPS: BENI_v1.0.ops
Tick one package in Odin & place that ".tar.md5" file under One Package field.
Click "Start".:thumbup:
Additional advice: Try another pc/laptop coz in most cases USB is the major issue
*This will work for sure*:thumbup:
However, if unfortunately none of these work for u, then give it to service center...only way left...

ok I will give it a try once again .....and do u think that there may be some other issues lyk some hardware part faliure....

If the Download Mode is stable, there's no failure on phone's side. Our Fit's hardware never failed for such circumstances.Hence, pc is the main issue.
I think that all kinds of wrongs are easily recovered if Download Mode still exists on the phone(some ppl have their phone blinking in Download Mode...which is bad).
& 1 more thing... those care takers will definitely tell u that u need to replace ur motherboard(even if its alright) which isn't a good deal IMO.

hey I tried it your way but the same problem.....i think I have to visit the customer care and see if they can hook up to something...and I thing it would be wise going for a new cell if they say to change the motherboard....and thanks for your help bro.....

goplu said:
...and I thing it would be wise going for a new cell if they say to change the motherboard....
Click to expand...
Click to collapse
Absolutely...!!!

[q] help asap!!!

Hello,
Am new on this forum, and basically new at android operative system. So I wanted to root my Samsung Galaxy Young GT-S6310 via Odin and I got PASS! But afterwards I couldn't enter CWM by pressing Vol+ Home Power button...Phone wasn't practically rooted but it was still working fine.
But after two days I thought of resetting it to STOCK and I used the option in Samsung settings. After the phone restarted and tried to boot up, the screen froze and it couldn't load further. Practically I cannot do anything because OS is not loading.
I have access to Vol- Home Power but I tried many tar files tru Odin to replace but i failed.
Can ANYONE help me out with this please? I just wanna make the phone work again.
Thanks A LOT in advance!

hello buddy
go to sammobile download a stock rom for your device then on your phone enter download mode and flash stock rom thru odin
try this and tell me what u get
good luck
Sent from my GT-S6312 using XDA Free mobile app

Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.

Newbee android said:
Hello bud. While i was waiting for any answer (even before yours) i used some tar.md5 thru Odin and luckly somehow got to use it normally again. Then i used kies n return my device to stock and after dat wiped all my data ...phone works fine now all good...but i would still like to root my s6310. Any idea?
Thanks for ur first post tho.
Click to expand...
Click to collapse
For rooting use an app named "framaroot" install this app on your phone and open it and set it to install superuser (super su is not recommended) and select gandalf exploit if u get a success reboot your device
Here is a link for framaroot: http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
Good luck
Press thanks if i helped ..sent from my galaxy note 8.0

Help! i have a note 2 7105 LTE

hello how are you all of you
well i need help i bought a samsung galaxy note 2 it had jellybean 4.1.2 i upgraded to 4.4.2 via kies than i rooted the phone i installed cwm 6.0.4 and flashed the cm12.1 rom and gapps for a month or so it worked properly but after a month my device started to heat and after that just yesterday started to have random reboots and now its stuck on logo samsung galaxy note 2 7105 but the thing is i can get into download mode even i cwm but i tried reflashing the same rom it didnt work so kindly im stuck i dont know what to do any help would be appriciated.
And if this is posted in the wrong section im sorry i didnt knew where to post it am new to this modding and flashing.

Use Micro USB Jig to enter Download Mode

delliverance said:
Use Micro USB Jig to enter Download Mode
Click to expand...
Click to collapse
i can enter download mode with volume downn power and home button combination but what to do next a step by step help would be great anyways id be appriciated even if idid get back to stock or any version its cool
-And also forgot mention before i flashed cm12.1 on my note i made a backup via cwm of my stock rom but dont know how to flash it

[Completed] Need help S5 mini duos G800H someone plzzzz help me !!

i tried to root my s5 mini duos G800H, didnt work got my fone bricked i think, does not turn on, i can only go into the recovery modes, vol up and the vol down ones, i have downloaded a few "stock roms" but none have got my fone back into normal, i downloaded a "recovery" used Odin 3.10.7, did all the right things as videos show to do went to AP, hit start, the recovery one gives "PASS" but when i turn it on (REBOOT) it stays at SAMSUNG S5 MINI screen (LOGO). i reboot it into the volume UP and it gives me a "recovery is not seandroid enforcing"... so ok now i tried to download a new "stock ROM" this one here "twrp_kmini3g-31102014-2247" now when i go into volume UP i get a menu "team win recovery project v2.8.1.0"... but still cant get the fone to start what do i do? what am i doing worng, can someone please help me just get the fone back to normal.? 3 days without a cell fone
Modelo: SM-G800H/DS
Also, when i go to sites where there is a list of firmwares to download, there are a few differente contries does it matter witch one i pick? i dont know where my fone is form is there a way to find out?

Well ,
U only need to odin the stock firmware for phone , what ever the country firmware u can try it , lile the BTU firmware there ok
& u can post ur question on ur device forum
http://forum.xda-developers.com/galaxy-s5-mini
Thank you for using XDA Assist ,,