Related
Hi everyone.
I've bought my Motorola Xoom 3G 32GB from the internet and it came with the "international" firmware.
3G used to work all fine with any carrier I try until I flashed Tiamat ROM for all the advantages it supplies.
It just can't find a carrier (which is probably US Verizon).
Is there any way I can regain my 3G back?
Well its been a couple days. Has the 3g kicked in yet by itself?
I went ahead and unlocked my zoom yesterday and when it booted back up I didn't have 4g service kinda like you.
I tried finding some APN settings but the xoom wont let me edit them anyways. By the end of the night I went back to try and fix it again and I noticed it had connected again by itself.
I would try calling the carrier you prefer and get them to reset the APN. Moto might do it if you leave out the rooting part.
If its like phones it might be a case of flashing the multiCSC. Because on my old captivate the multicsc was the international unlock you described.
Sent from my SAMSUNG-SGH-I997 using XDA App
Well, I'm in this state for moths and still didn't regain my 3G back.
And, is there any way I can re-flash the files which determine the carrier alone?
Or alternatively, isn't there a way to manually compile Tiamat ROM with the international build files for universal support?
well you could go back to stock and that should work to get 3g-
I really like this ROM and don't want to go back to original.
That's why I'm asking for solutions '{: (
Fredrick Sylar said:
I really like this ROM and don't want to go back to original.
That's why I'm asking for solutions '{: (
Click to expand...
Click to collapse
Look in the Development Section. TeamEos ICS Nightly is now available for 3G/4G...not sure if it supports international 3G yet, but they're working on it. The ICS rom, while still in alpha/beta stage (missing binaries for cameras) is stable and smooth and has tons of functionality.
Thanks okantomi!
I hope this ends my dilemma (fingers crossed).
Fredrick Sylar said:
Thanks okantomi!
I hope this ends my dilemma (fingers crossed).
Click to expand...
Click to collapse
It's the one for Stingray (the 3G/4G model).
im in 3.2 stock rom rooted with tiamat kernel oc gpu and 3g works like charm.the system is very fast and respoding good.
I really love Atrix 2, and I have two options:
one for a chinese one, which is cheaper and unlocked, but i'll have to give up all the android apps and facebook, twitter, etc.
one for a att one, which is relatively expensive and locked, but loaded with all the apps i needed.
So, my question is that is it possible to flash a chinese Atrix 2 with a stock att rom or other English roms that has the apps loaded without being carrier-locked?
Thanks!
why not getting att one, first it is cheaper XD(att version release 2 months early than chinese one). Also it seems like it has more support on att version in here, since most rom here are base on att version here.
But the chinese version also has a white one, which i prefer. Plus, i can only buy the att version using ebay, while i can tell my dad to buy the chinese one and bring it for me
hu_willy said:
I really love Atrix 2, and I have two options:
one for a chinese one, which is cheaper and unlocked, but i'll have to give up all the android apps and facebook, twitter, etc.
one for a att one, which is relatively expensive and locked, but loaded with all the apps i needed.
So, my question is that is it possible to flash a chinese Atrix 2 with a stock att rom or other English roms that has the apps loaded without being carrier-locked?
Thanks!
Click to expand...
Click to collapse
No you can not do this. The ROMs (fxz files) are hardware Dependant, and that includes the Radio. You can not flash an MB865 fxz (ROM) to an ME865 phone, and vise a versa.
jimbridgman said:
No you can not do this. The ROMs (fxz files) are hardware Dependant, and that includes the Radio. You can not flash an MB865 fxz (ROM) to an ME865 phone, and vise a versa.
Click to expand...
Click to collapse
But if i buy an att one, can it be unlocked with the 3g network properly functioning?
hu_willy said:
But if i buy an att one, can it be unlocked with the 3g network properly functioning?
Click to expand...
Click to collapse
That is not something we discuss in here, but I am sure a google search will get you what you need pretty quick. I have heard it is possible though.
yes i am using the att version atrix 2 now right at ur location . I got it right after it released and unlocked it. I have been using for 2 months everything work perfect so far.
athris said:
yes i am using the att version atrix 2 now right at ur location . I got it right after it released and unlocked it. I have been using for 2 months everything work perfect so far.
Click to expand...
Click to collapse
how did you unlock it? did you use the unlock code method or something else?
I bought the unlock code from ebay.
Sent from my MB865 using xda premium
I'm sick of being treated like dirt by Motorola, and will never buy anything from them again.
But for now I'm stuck with my Xoom Wi-Fi, unable to upgrade to ICS because Motorola doesn't give a stuff!
Is there a way to change my region settings from Australia to US?
I'm guessing if the update thought I had a US Xoom it would update it for me.
Sorry to hear that man. Not sure about changing regions, just root it and Install the latest ICS 4.0.4 Custom ROM.
http://forum.xda-developers.com/showthread.php?t=1242241
I'm in the UK and get treated the same as you.. So just unlock your xoom and flash the USA rom.. Its dead simple... There are lots of tutorials on the web with all the links to the required files..
Sent from my GT-I9100 using XDA
Dont blame motorola blame the countries. Unfortunately the world isn't a universal place.
Sent from my Galaxy Nexus using Xparent Cyan Tapatalk
okuda1971 said:
I'm in the UK and get treated the same as you.. So just unlock your xoom and flash the USA rom.. Its dead simple... There are lots of tutorials on the web with all the links to the required files..
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
+1. iirc Aus, can and UK can all flash us MZ604 files on to become an honorary GED
Sent from my Xoom using xda premium
I GEDified my Aussie MZ604 using the image from the Motorola site. Now running 4.0.4 and its really good.
I used the instructions from here
http://forums.whirlpool.net.au/forum-replies.cfm?t=1853613#r4
moosc said:
Dont blame motorola blame the countries.
Click to expand...
Click to collapse
Are you kidding? Motorola alone chose to release ICS in the US only, it has nothing to do with any country.
Thanks to the rest of you, looking into it.
Hmm no google has control of the USA wifi xooms that's there test baby. Why do u think there are tweeks like SD card on forign motorola xooms and not the USA xooms? Motorola just sends out the os for google on the USA xooms.
deanbilly said:
Are you kidding? Motorola alone chose to release ICS in the US only, it has nothing to do with any country.
Thanks to the rest of you, looking into it.
Click to expand...
Click to collapse
Sent from my Xoom using Tapatalk
deanbilly said:
Are you kidding? Motorola alone chose to release ICS in the US only, it has nothing to do with any country.
Thanks to the rest of you, looking into it.
Click to expand...
Click to collapse
Wrong. The US WiFi only is a Google Experience Device (GED) and GOOGLE handles updates for it, NOT Motorola.
Sent from my ADR6400L using Tapatalk
Updates come from Motorola, who have issued release dates for foreign owned Xooms.
deanbilly said:
I'm sick of being treated like dirt by Motorola, and will never buy anything from them again.
But for now I'm stuck with my Xoom Wi-Fi, unable to upgrade to ICS because Motorola doesn't give a stuff!
Is there a way to change my region settings from Australia to US?
I'm guessing if the update thought I had a US Xoom it would update it for me.
Click to expand...
Click to collapse
If you haven't found this yet: http://forum.xda-developers.com/showthread.php?t=1166106
You'll need to register (free) as a Motorola dev to download the US Honeycomb image from their site, or just download it from somewhere else. Then once it's flashed, your device will update itself via the official OTAs all the way to ICS 4.0.4.
deanbilly said:
I'm sick of being treated like dirt by Motorola, and will never buy anything from them again.
But for now I'm stuck with my Xoom Wi-Fi, unable to upgrade to ICS because Motorola doesn't give a stuff!
Is there a way to change my region settings from Australia to US?
I'm guessing if the update thought I had a US Xoom it would update it for me.
Click to expand...
Click to collapse
http://www.simonjstuart.com/2011/07/23/gedify-your-non-us-wifi-xoom-for-n00bs/
Simplest and fairly fool-proof instruction. I used this to change my region to US. Got pushed to ICS by doing the steps listed above and then checking for updates. Worked GREAT!
Just GEDify my brother version to US and very easy using the guide
although find some differences. but that make it easier
I have an Atrix 2 from the U.S. that I am using in Thailand. My current firmware version is 55.13.25.MB865.ATT.en.US. Can I flash the phone to the Asia Retail version without any problems? Is the hardware identical? If yes, how do I go about flashing it?
As I know, you can only flash AT&T fw
Flash others -> soft brick
PhoenixNghi said:
As I know, you can only flash AT&T fw
Flash others -> soft brick
Click to expand...
Click to collapse
Bummer. Thanks for the reply.
Sent from my Astrix 2 using mobile app.
Is there an actual hardware difference?
Quite hard finding the right info
Sent via Tapatalk, Atrix 2 ICS.
Processed by brainmeats.
lukensteinz said:
Is there an actual hardware difference?
Quite hard finding the right info
Sent via Tapatalk, Atrix 2 ICS.
Processed by brainmeats.
Click to expand...
Click to collapse
I think yes, the proof is, while other Atrix 2 such as Chinese version, Indian version have ICS leak, we (AT&T) can not flash these leak, zzz
PhoenixNghi said:
I think yes, the proof is, while other Atrix 2 such as Chinese version, Indian version have ICS leak, we (AT&T) can not flash these leak, zzz
Click to expand...
Click to collapse
Instead of just guessing it would be nice if someone can state some facts and say what the exact differences are. The one they sell in Thailand has the exact same HSDPA/UMTS bands as the AT&T one so I would think they are identical hardware. Someone who actually knows something please enlighten us.
jboxer said:
Instead of just guessing it would be nice if someone can state some facts and say what the exact differences are. The one they sell in Thailand has the exact same HSDPA/UMTS bands as the AT&T one so I would think they are identical hardware. Someone who actually knows something please enlighten us.
Click to expand...
Click to collapse
The two main differences between the international A2s and the AT&T A2 are:
1) Hardware differences. AT&T's A2 has different GPS, radio, and wifi chips than the international A2s.
2) The international A2s and the AT&T A2 have different bootloader signatures... so we would not be able to even begin flashing the fxz in order to flash the ICS update.
PS. Next time please search first ... http://forum.xda-developers.com/showpost.php?p=26978219&postcount=261 http://forum.xda-developers.com/showpost.php?p=28463789&postcount=24 etc etc
cogeary said:
The two main differences between the international A2s and the AT&T A2 are:
1) Hardware differences. AT&T's A2 has different GPS, radio, and wifi chips than the international A2s.
2) The international A2s and the AT&T A2 have different bootloader signatures... so we would not be able to even begin flashing the fxz in order to flash the ICS update.
PS. Next time please search first ... http://forum.xda-developers.com/showpost.php?p=26978219&postcount=261 http://forum.xda-developers.com/showpost.php?p=28463789&postcount=24 etc etc
Click to expand...
Click to collapse
Please be more specific. Give us the manufacturer part numbers for these supposedly different chips. Then we have somewhere to start working from.
Cogeary is dead on my friend, and we didn't engineer the phone so we can't give exactly specific chip numbers and so fourth but yes, he is right, and very reputable.
Even if you some how magically got it to install, you would have no phone calling capabilities due to the radio issue.
Moving to that firmware, is just an impossibility. It'd be a soft brick waiting to happen.
However, it's your call, feel free to flash it! Just make sure you're ready to flash the fxz.
Just be patient and wait for ICS with the rest of us.
Sent from my MB865 using xda premium
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more fun (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
jboxer said:
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more phone (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
Click to expand...
Click to collapse
It's an ME865? You might already have an ICS leak. What's your system version?
cogeary said:
It's an ME865? You might already have an ICS leak. What's your system version?
Click to expand...
Click to collapse
NO. Mine in an MB865 from AT&T USA unlocked and being used in Thailand. What I said is the version sold locally is an ME865. That is why i wanted to know if I could flash the Asian version rom to my phone.
jboxer said:
I checked some more and the one sold here in Thailand is an ME865, even thought it has the same exact freqs as the ATT one. Different hardware deliminators so definitely some major differences. Yes, I will wait for ICS as I don't want to brick my phone. I had more phone (even though I like the Atrix better) with my LG G2X because with the unlocked bootloader and ability to install CWM recovery to the phone it was virtually unbrickable.
Click to expand...
Click to collapse
Oh yeah absolutely bud, My OG droid was unlocked and i loved it.
We are definitely limited with our locked bootloader. But alas, we do what we can!
Hey,
Can I flash a Canadian Fido model with the French SFR ROM? It's not a US Droid, so I'm assuming the bootloader is unlocked?
It looks like the Euro model is getting quicker firmware upgrades (they got JB late November, whilst the Canadian model is pending for Q1 2013), so I would prefer to be on that ROM!
Cheers,
Su
Sumanji said:
Hey,
Can I flash a Canadian Fido model with the French SFR ROM? It's not a US Droid, so I'm assuming the bootloader is unlocked?
It looks like the Euro model is getting quicker firmware upgrades (they got JB late November, whilst the Canadian model is pending for Q1 2013), so I would prefer to be on that ROM!
Cheers,
Su
Click to expand...
Click to collapse
Your bootloader is locked, but can be unlocked. I wouldn't recommend going to European firmware though since I've been seeing a lot LTE issues when users switch off of the Rogers ROM. What's another month (or 2-3 weeks) anyways? You might end up spending a lot of time getting your phone to function just how it did on the Rogers firmware.
Sent from my XT925 using Tapatalk 2
Hey,
I'm actually based in the UK, but thinking of picking up a Fido RAZR HD because they are much cheaper over there!
We have only one LTE network at the moment, and I'm not on it I'd prefer to have JB and HSPA+ if possible!
I've just come across this thread http://forum.xda-developers.com/showthread.php?p=35085808
Looks like the Australian ROM is using the new(er) version of JB?!
Thanks,
Su
JB "should" be out at the end of January for our phone claims Rogers. I would at least wait till Feb 1St b4 tinkering
Sent from my XT925 using xda app-developers app
I flashed the Fido Razr HD using an Australian JellyBean sbf with the Rogers modem_signed and fsg_signed files from ICS. Works a beaut, not sure which rom you would use the files for to get it working in the UK though. The Australian rom had minimal bloat and I didn't feel like waiting a month for Rogers/Fido to release JB.
Does the Rogers/Fido ROM have a lot of crapware in it?
Not too much... Nothing compared to Verizon! I saw like 7 or 8 bloatware applications when I first got my phone and was able to disable all of the apps I.don't use. Heck, they didn't even pre-load an ebook software!
Sent from my XT925 using Tapatalk 2
Hey I just rooted my fido razr hd and I am wondering where you got those specific files and how you used them when flashing the Australian sbf.
Do you know if you can revert to the fido rom if you ever wanted?
Thanks in advance
Sent from my XT925 using xda app-developers app
skpamnani said:
Hey I just rooted my fido razr hd and I am wondering where you got those specific files and how you used them when flashing the Australian sbf.
Do you know if you can revert to the fido rom if you ever wanted?
Thanks in advance
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
I got them from the Fido/Rogers ICS rom. I opened the JellyBean rom with 7-zip and dragged and dropped the files along with an xml file found here: http://forum.xda-developers.com/showthread.php?t=2054906
I missed a step when doing it and missed putting the fsg file in there and was without LTE, I was then able to use a fastboot script to flash it after. I have attached the script and fsg file. The modem file can be found in the referenced thread. You also need to have an unlocked bootloader.
I'm fairly certain we are able to SBF to the Rogers/Fido JB when it comes out safely. I would not SBF to a prior firmware like ICS myself....and why would you want to?
coolloser said:
I got them from the Fido/Rogers ICS rom. I opened the JellyBean rom with 7-zip and dragged and dropped the files along with an xml file found here: http://forum.xda-developers.com/showthread.php?t=2054906
I missed a step when doing it and missed putting the fsg file in there and was without LTE, I was then able to use a fastboot script to flash it after. I have attached the script and fsg file. The modem file can be found in the referenced thread. You also need to have an unlocked bootloader.
I'm fairly certain we are able to SBF to the Rogers/Fido JB when it comes out safely. I would not SBF to a prior firmware like ICS myself....and why would you want to?
Click to expand...
Click to collapse
Thanks alot for this did you unlock the bootloader with the official motorola site? I don't like the idea of losing all warranty even though the phone seems to be built very nice
Sumanji said:
Does the Rogers/Fido ROM have a lot of crapware in it?
Click to expand...
Click to collapse
I have the fido one,
crapware, honestly about 4 apps, just like myaccount, vvm, ringtones and shop.
But when they sold me my phone it was apparently a Fido/Rogers verison, and i had to return the phone, then i got my new one i never hit SIM CONFIGURATION when it booted and now my rom is completely stock from factory, no crapware whatsoever! not even a fido boot screen.
skpamnani said:
Thanks alot for this did you unlock the bootloader with the official motorola site? I don't like the idea of losing all warranty even though the phone seems to be built very nice
Click to expand...
Click to collapse
I did, warranty's are made to be broken right?! lol
If I ever had a defect; I would return it to Fido anyways...they have no idea if it's been unlocked nor would they care to check.
Just a little warning for you ...
if you use a rogers/fido on UK :
you can flash any firmware with any radio file ... but YOU NEVER GET LTE ( NOT SAME BAND IT S HARDWARE NOT SOFTWARE )... and Rogers/Fido phone don't have dual carrier chip (42mbits)... only hspa+ chip (21 mbits)
if i have the choice i prefer pay 50 $ more to get lte or dc hspa ...
o2qc418 said:
Just a little warning for you ...
if you use a rogers/fido on UK :
you can flash any firmware with any radio file ... but YOU NEVER GET LTE ( NOT SAME BAND IT S HARDWARE NOT SOFTWARE )... and Rogers/Fido phone don't have dual carrier chip (42mbits)... only hspa+ chip (21 mbits)
if i have the choice i prefer pay 50 $ more to get lte or dc hspa ...
Click to expand...
Click to collapse
Hmm, well I assumed there would be physical hardware differences, but got different info from another thread:
EdwardN said:
Not exactly true. The XT925 firmware is what determines which radios are active. Having 700/800/1700/1800/2100/2600 all active at the same time would drain the battery like woah. Currently you can merge the radio you need into the rom you want to use, and make it work that way.
Click to expand...
Click to collapse
The DC-HSPA point is a good one though, thanks for the heads up so you're saying the Euro/LatAm model does support it?
Cheers,
Su
Sumanji said:
Hmm, well I assumed there would be physical hardware differences, but got different info from another thread:
The DC-HSPA point is a good one though, thanks for the heads up so you're saying the Euro/LatAm model does support it?
Cheers,
Su
Click to expand...
Click to collapse
For sure the xt925 have two model ... in canada only compatible to hspa up to 21 mbits and lte band 700 and aws ...
European device have dc hspa up to 42 mbis and all others lte band...
In first time this is hardware... after there are the base band... i have test all baseband and i don t get dc hspa with my razr hd