So I rooted my phone using superoneclick I went to factory reset today and notice CWM was installed on my phone I thought CWM had to be installed afterwards with rom manager?
Also for the baseband which one am I suppose to flash for GB?
My current baseband is L6260_MODEM_SIC_01.1042.00
Model is P920h
Finally can you use the GB baseband for froyo?
Related
One day, I tried to find the way to restore my nexus s before I may flash any rom in the future. I dl the rom manager and I found the stock rom of nexus s(I didn't know it is for I9020 or I9023) and flashed it.
Then, I discovered that the baseband version was chanced to bei9023XXKB1 and the build number is GRI40...
I found various way to restore my nexus s to be HKT version hardly and I have found the way to restore nexus s to be HKT(Baseband version is i9023XXKB3 and Build number is GRI54) through Odin3. However, after I rooted the device and dl the titanium backup, it did not work(force close forever). Therefore I need a clear 2.3.3 rom with Baseband version is i9023XXKB3 and Build number is GRI54 HK rom (whatever using recovery mode install zip file from sd or Odin3)
and a few question
when I enter the bootloader mode in my device, I found that the bootloader version is I9023XXKA3, is there any problem?
thx for help.
I have rooted my nexus s and flash the kernel.
Here are the phone details.
Android version: 2.3.4
Baseband version: I9020XXKD1
Kernel version: [email protected] #27
Build no.: GRJ22
I tried both manual and OTA update, but it failed. Is it due to my kernel version?
I want to update to 2.3.6 as the OTA notification is really annoying.
what should I do? thanks in advance.
I have the same problem, nether the OTA or the manual update via ClockWork works.
Flash the rooted version in cwm. Wipe only cache and dalvic cache. Done. If a radio was changed and you would like to use it flash it via fastboot.
Sent from my Nexus S 4G using xda premium
Could you point to the rooted version please?
Ok I found the solution, the OTA update didn't work, and neither did the Update.zip
Grabbed the full Rom from here http://forum.xda-developers.com/showthread.php?t=1056062
And updated via CWM.
Working fine and running 2.3.6
hi
just downloaded and flashed V21A_00.KDZ FIRMWARE Official European GB. took a long time but im now running android 2.3.5. i am looking to flash the thiaiz rom but am a little confused about the baseband.
have i installed the latest baseband with the kdz file above? or do i need to complete this step: http://forum.xda-developers.com/show...47&postcount=2
got half way through it but didnt work. current baseband is L6260_MODEM_SIC_01.1042.00
thanks
hello
the new(gingerbread) baseband automatically flashed when you flashed the gingerbread KDZ..you can go ahead and root the phone and install thiaiz rom
right, i got the rom up and running. do i install the framework.zip through cwm or do i unzip it on my computer then install the apk's through file explorer? also it says on his page that it can be slightly over-clocked. what can i use to do this?
thanks for your help
Hi -
I'm trying to install the latest update from AT&T. I had previously tried rooting after going back to the default rom, and still have ClockworkMod Recovery v5.0.2.6 installed. When I download the update and reboot the phone, I get taken to this bootloader instead of giving me the option to install the update. When the phone finishes rebooting, the following message is displayed: "The software could not be updated at this time" My brother said I have to flash, but I'm not sure I know exactly what he meant. (is that just for the bootloader?)
Thanks in advance
Samsung Galaxy S II Skyrocket (I727)
Default ROM
Android 2.3.5
Baseband version: I727UCKJ2
Kernel Version: 2.6.35.11
Build number: GINGERBREAD.UCKJ2
Yes you do need to flash.
how to Odin and stock firmware
http://forum.xda-developers.com/showthread.php?t=1342348
And not to slam the OP but go to Sammobile to get the exact uckj2 Rom which is 100 percent stock
Read carefully and you'll be fine. I was new at flashes toi
Sent from my SAMSUNG-SGH-I727 using xda premium
Dracarnion said:
Hi -
I'm trying to install the latest update from AT&T. I had previously tried rooting after going back to the default rom, and still have ClockworkMod Recovery v5.0.2.6 installed. When I download the update and reboot the phone, I get taken to this bootloader instead of giving me the option to install the update. When the phone finishes rebooting, the following message is displayed: "The software could not be updated at this time" My brother said I have to flash, but I'm not sure I know exactly what he meant. (is that just for the bootloader?)
Thanks in advance
Samsung Galaxy S II Skyrocket (I727)
Default ROM
Android 2.3.5
Baseband version: I727UCKJ2
Kernel Version: 2.6.35.11
Build number: GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
Pretty sure you need to be on the stock 3e recovery and not Clockwork
Thanks!
So I need to use Odin to return my phone to stock to fix this?
Yes
Sent from my SAMSUNG-SGH-I717 using XDA
Hi
I want to flash the icysnap Rom and I understand that I need to flash a new baseband (I am running the stock 2.2.1 that came with the phone) my question is do I need to flash the baseband before of after I flash the rom???
And another question is when I connect my phone to the pc when I upgrade the baseband does it need to be on or off??
Thanks in advance!!!!
its more safer to install the new baseband v20 before you flash the rom thats what i did works perfect
thekidelvis said:
its more safer to install the new baseband v20 before you flash the rom thats what i did works perfect
Click to expand...
Click to collapse
Ok great
Thanks man.
If you flash stock GB ROM using KDZ, then your baseband will be updated automatically. Here's how to do it: http://forum.xda-developers.com/showthread.php?t=875881.
Else, you can search for updating the baseband via LGMDP. There's no harm doing it before or after flashing a ROM supporting new baseband.