Related
Just upgraded to the latest version of Kies and I continue not being able to connect my GT-P6800 to Kies...it just hangs there "Connecting" forever
My Ace Duo connects fine...the 7.7?...Nothing...not in MTP or PTP USB/PC connection modes.
Utterly puzzled...
XK
XDAKhan said:
Just upgraded to the latest version of Kies and I continue not being able to connect my GT-P6800 to Kies...it just hangs there "Connecting" forever
My Ace Duo connects fine...the 7.7?...Nothing...not in MTP or PTP USB/PC connection modes.
Utterly puzzled...
XK
Click to expand...
Click to collapse
What OS are you running on computer? Check Device Manager. Installed Samsung USB drivers? Connecting directly to computer and not via a hub? Try a different USB cord. Some just won't work.
HTH
Thanks for the reply
skeeterpro said:
What OS are you running on computer?
Click to expand...
Click to collapse
W7(64)
skeeterpro said:
Check Device Manager.
Click to expand...
Click to collapse
Already done.
skeeterpro said:
Installed Samsung USB drivers?
Click to expand...
Click to collapse
Re-installed several times, via "connection troubleshooting" feature, in Kies.
skeeterpro said:
Connecting directly to computer and not via a hub?
Click to expand...
Click to collapse
Connected via a powered USB hub. Tried a MB direct USB port, same results.
skeeterpro said:
Try a different USB cord. Some just won't work.
Click to expand...
Click to collapse
It's the one provided with the device. It used to work. It still does, as Windows recognizes the tab as an MTP device.
I've now left it a long, LONG time trying to connect. After several minutes I got a pop-up window with: "This device is not supported by Kies 2.0. Make sure that your device is supported and try again"
What the....!?!?!?
XK
If you've installed a ROM from a different country, a custom ROM, or rooted your device, KIES will not recognize it. Actually, it is possible that KIES won't recognize the device if the binary counter is above zero (or, if you've ever installed anything through Odin).
Steve_max said:
If you've installed a ROM from a different country, a custom ROM, or rooted your device, KIES will not recognize it. Actually, it is possible that KIES won't recognize the device if the binary counter is above zero (or, if you've ever installed anything through Odin).
Click to expand...
Click to collapse
I did install the Austrian P6800XXLQ2 P6800OXALQ2 firmware with Odin and have also rooted the device.
Rooting must not be the cause, since Kies connected fine with stock HC and the device already rooted.
What's the "binary counter"?
Is there any way around this? I would like to have Kies centralizing my contacts and backups.
XK
Does your CSC match the installed frimware?
Had to change the CSC from TEN to ATO after installing ATO firmware in order for Kies to work properly
ShyPod said:
Does your CSC match the installed frimware?
Had to change the CSC from TEN to ATO after installing ATO firmware in order for Kies to work properly
Click to expand...
Click to collapse
Well, I downloaded a zip file named "P6800XXLQ2_P6800OXALQ2_ATO". It uncompressed into "P6800OXALQ2_P6800XXLQ2_HOME.tar" and "SS_DL.dll".
I installed using Odin. I can only believe the CSC is the ATO one.
How do I check this?
XK
XDAKhan said:
I did install the Austrian P6800XXLQ2 P6800OXALQ2 firmware with Odin and have also rooted the device.
Rooting must not be the cause, since Kies connected fine with stock HC and the device already rooted.
What's the "binary counter"?
Is there any way around this? I would like to have Kies centralizing my contacts and backups.
XK
Click to expand...
Click to collapse
Binary Counter is Samsung's internal method of tracking how many times a ROM (or other alteration I believe) was made to the device. Some say a method of tracking for warranty purposes. Chainfire has an app (TriangleAway) that resets the binary counter on Google Play but unsure if it is supported for the 7.7. Have it on my 10.1 Note.
skeeterpro said:
Binary Counter is Samsung's internal method of tracking how many times a ROM (or other alteration I believe) was made to the device. Some say a method of tracking for warranty purposes. Chainfire has an app (TriangleAway) that resets the binary counter on Google Play but unsure if it is supported for the 7.7. Have it on my 10.1 Note.
Click to expand...
Click to collapse
Does not work on the 7.7.
Showed the following message: "Could not locate hidden partition. Are you not running ICS?"
Uninstalled with refunded.
PK
ShyPod said:
Does your CSC match the installed frimware?
Had to change the CSC from TEN to ATO after installing ATO firmware in order for Kies to work properly
Click to expand...
Click to collapse
Please, tell me how to change the CSC?!
I've been trying it for a long time without success... I flashed the ATO ROM (P6800XXLQ2) to my Hong Kong vendor code device. But this ROM doesn't contain special CSC folder, so, I couldn't change it with the dedicated CSC Change app. I even thought that I should go back to honeycomb and change the code on that ROM but I didn't find a proper ATO ROM among the HC ones on Samfirmware. So, what to do?
Tapatalk 2-vel küldve az én GT-P6800-ről
XDAKhan said:
Does not work on the 7.7.
Showed the following message: "Could not locate hidden partition. Are you not running ICS?"
Uninstalled with refunded.
PK
Click to expand...
Click to collapse
Just installed, and I can confirm it does work. At least under CM10...
Steve_max said:
Just installed, and I can confirm it does work. At least under CM10...
Click to expand...
Click to collapse
Not on my Austrian version...
Thought: I love Android because of the versatility and the superior support given by a knowledgeable, generous community of developers.
...but I am starting to wonder if the efficiency of those developers coupled with the said versatility isn't resulting in such a gargantuan number of combinations that they are actually killing any chance of effective support, as our own incarnation of Android is always slightly but irremediably different from the next one.
XK
XDAKhan said:
Not on my Austrian version...
Thought: I love Android because of the versatility and the superior support given by a knowledgeable, generous community of developers.
...but I am starting to wonder if the efficiency of those developers coupled with the said versatility isn't resulting in such a gargantuan number of combinations that they are actually killing any chance of effective support, as our own incarnation of Android is always slightly but irremediably different from the next one.
XK
Click to expand...
Click to collapse
Did you try using the CM10 2012-10-04 build? Its changelog mentions TriangleAway compatibility specifically.
ShyPod said:
Does your CSC match the installed frimware?
Had to change the CSC from TEN to ATO after installing ATO firmware in order for Kies to work properly
Click to expand...
Click to collapse
Have you try with this? https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=search_result
It worked for me but make sure you back up your data because it will wave your data.
Interesting post. I gave up months ago trying to connect my 7.7 to Kies on my computer. Getting the same message as the OP. And.. I am running stock honeycomb from VZ. No rooting, roms, etc.
Thread moved to Q & A section, post in the relevant section next time.
'cooleagle' said:
Thread moved to Q & A section, post in the relevant section next time.
Click to expand...
Click to collapse
Errr...the only question in the OP was a rhetorical one. All the rest was just matter of fact. Can you please elaborate on why this belongs to the Q&A, so I can be relevant the next time around?
Thanks.
XK
XDAKhan said:
Errr...the only question in the OP was a rhetorical one. All the rest was just matter of fact. Can you please elaborate on why this belongs to the Q&A, so I can be relevant the next time around?
Thanks.
XK
Click to expand...
Click to collapse
Hi bud, don't you think you were asking for a solution as Kies was unable to detect your device after updating to the latest firmware ?
'cooleagle' said:
Hi bud, don't you think you were asking for a solution as Kies was unable to detect your device after updating to the latest firmware ?
Click to expand...
Click to collapse
No.
I asked for help regarding Kies not being able to recognize my 7.7 on another thread on the same subject...funnily enough, one where the OP specifically asked for a solution and that was (...and still is...) filled under "Galaxy Tab 7.7 General" without being subject to this aggressive moderating zeal...go figure...
This thread of mine merely stated the fact (not question) that it still does not connect under the newest Kies incarnation.
Although generous posters advanced with possible solutions, that was not the intent.
The reason I prefer international forums to Portuguese ones is because my countrymen have a tendency to turn into little arrogant dictators when the slightest modicum of power is entrusted to them (...especially under the cover of anonymity...)
Please don't fall into the same trap.
XK
cakrabayu said:
Have you try with this? https://play.google.com/store/apps/details?id=com.manniakk.cscselector&feature=search_result
It worked for me but make sure you back up your data because it will wave your data.
Click to expand...
Click to collapse
Hi,
Having the same issues, not connecting to KIES and cannot find out my CSC.
Will this tool, specifically for a phone, work with the SCH-i815 version of the tab 7.7 once I root?
thx!
My question may sound foolish but here it is.
I have Galaxy R with me on stock 2.3.4. Never rooted or installed any sort of ROMs.
If I carry this phone to Singapore and try to update OTA, will I be able to update to ICS as I see ICS Stock ROM for Singapore already released.
saroj405 said:
My question may sound foolish but here it is.
I have Galaxy R with me on stock 2.3.4. Never rooted or installed any sort of ROMs.
If I carry this phone to Singapore and try to update OTA, will I be able to update to ICS as I see ICS Stock ROM for Singapore already released.
Click to expand...
Click to collapse
If update is released in your area/country then only you will get OTA update or else you will not get it....
where are you from i mean which country..
mj.vikram said:
If update is released in your area/country then only you will get OTA update or else you will not get it....
where are you from i mean which country..
Click to expand...
Click to collapse
I am from India. I may go to Singapore next month. Here in india OTA won't show any new update as it has never gone past 2.3.4
But in Singapore, I think the update for ICS has been released. So I had a doubt if I go there, and just search for update OTA, will I be able to see ICS and be able to update to ICS??
saroj405 said:
I am from India. I may go to Singapore next month. Here in india OTA won't show any new update as it has never gone past 2.3.4
But in Singapore, I think the update for ICS has been released. So I had a doubt if I go there, and just search for update OTA, will I be able to see ICS and be able to update to ICS??
Click to expand...
Click to collapse
Buddy India we also we got ICS just connect your phone to PC and update it using Samsung Kies S/W and in INDIA Galaxy R released with 2.3.5 not 2.3.4..... No OTA Differs from area to area its depends on Phone CSC so you will not get OTA if you go to Singapore ....
mj.vikram said:
Buddy India we also we got ICS just connect your phone to PC and update it using Samsung Kies S/W and in INDIA Galaxy R released with 2.3.5 not 2.3.4..... No OTA Differs from area to area its depends on Phone CSC so you will not get OTA if you go to Singapore ....
Click to expand...
Click to collapse
Are you sure that we get ICS in India when we connect to a PC using kies???
saroj405 said:
Are you sure that we get ICS in India when we connect to a PC using kies???
Click to expand...
Click to collapse
yes just check it with kies ....
Also, our phone does not get updates with respect to our geographical location.. If you purchased your phone in India, you will have an indian rom by default and kies will search for an update to that rom.. So even if you take your phone to hong Kong or Taiwan it will not update if ics for India is not available...
Since ics is out for india, you can go ahead and update with kies as suggested by mj.vikram buddy
From my CM10.1 powered galaxy R
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
pankajramnani said:
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
Click to expand...
Click to collapse
buddy, just dont unpluged the phone when It will be updating. Also, eMMC bug is there in ICS. so after that just install CWM & then install Ardatdat's kernel V4 or higher. it is safe.
pankajramnani said:
If we update through Kies, will my phone be affected by the eMMC brick bug? will my phone get bricked by chance? is there any safe way to do it?
Click to expand...
Click to collapse
yes off course eMMC Brick bug will be there but it will not effect you until unless you wipe anything from CWM, if you are not using CWM then it will be safe or else you flash Ardatdat's kernel if you are using CWM.....
mj.vikram said:
yes off course eMMC Brick bug will be there but it will not effect you until unless you wipe anything from CWM, if you are not using CWM then it will be safe or else you flash Ardatdat's kernel if you are using CWM.....
Click to expand...
Click to collapse
I've never rooted my phone. So, if I want to just update it through Kies, and then wipe data and factory reset my phone, will it do any harm to it? (considering that there is no CWM & ardatdat kernel is installed). Please tell me the steps to install the kernel as well..
Sorry for bugging you!
pankajramnani said:
I've never rooted my phone. So, if I want to just update it through Kies, and then wipe data and factory reset my phone, will it do any harm to it? (considering that there is no CWM & ardatdat kernel is installed). Please tell me the steps to install the kernel as well..
Sorry for bugging you!
Click to expand...
Click to collapse
if you never rooted your mobile and don't want to use CWM forget all the things and just use Kies and update it ICS.....
mj.vikram said:
if you never rooted your mobile and don't want to use CWM forget all the things and just use Kies and update it ICS.....
Click to expand...
Click to collapse
Thanks a ton!
You are saying that the brick bug won't affect me at all if I am not using CWM, right?
pankajramnani said:
Thanks a ton!
You are saying that the brick bug won't affect me at all if I am not using CWM, right?
Click to expand...
Click to collapse
Yep you are correct....
Brick bug won't affect you, but don't do a factory reset! It's like wiping without a secure kernel.
New firmware found.
Firstly I was shocked to see this new firmware on kies. All these days I was checking on Kies(Mac version) and didn't find any update.
(I am on GB 2.3.5. Never did any customizations on my phone, no rooting, no infected ROM. Nothing. It is as same as it was when I took it)
Now, I find this firmware update on KIES (Windows version) and wanna know if I can go ahead and update this firmware?? Is there any side effect of doing this?
Some one says you cannot factory reset after this firmware. Someone says, nothing would happen.
I am confused. Please help.
P.S: I am newbie and have no clue about CWM or eMMC brick or kernal
saroj405 said:
Firstly I was shocked to see this new firmware on kies. All these days I was checking on Kies(Mac version) and didn't find any update.
(I am on GB 2.3.5. Never did any customizations on my phone, no rooting, no infected ROM. Nothing. It is as same as it was when I took it)
Now, I find this firmware update on KIES (Windows version) and wanna know if I can go ahead and update this firmware?? Is there any side effect of doing this?
Some one says you cannot factory reset after this firmware. Someone says, nothing would happen.
I am confused. Please help.
P.S: I am newbie and have no clue about CWM or eMMC brick or kernal
Click to expand...
Click to collapse
buddy: just take backup of your contacts & msgs. If it could (it won't but for safety side), then please go ahead. update it. Coz CWM format may harm due to eMMC bug.
kataria.vikesh said:
buddy: just take backup of your contacts & msgs. If it could (it won't but for safety side), then please go ahead. update it. Coz CWM format may harm due to eMMC bug.
Click to expand...
Click to collapse
I dunno about CWM and i don't have it on my phone. can you please explain about this and how it would harm due to eMMC bug.
( I ran eMMC brick bug check application on my phone. It is a sane device. )
saroj405 said:
I dunno about CWM and i don't have it on my phone. can you please explain about this and how it would harm due to eMMC bug.
( I ran eMMC brick bug check application on my phone. It is a sane device. )
Click to expand...
Click to collapse
Simply update it & do not think much about these things and for safe side do not wipe data.....
mj.vikram said:
Simply update it & do not think much about these things and for safe side do not wipe data.....
Click to expand...
Click to collapse
Error says you require more than 3000MB space.
Hy, i'm new here, so sorry if i did not post in the right section
I have a Galaxy Fit on Android 2.3.4 and I want to update to 2.3.6.The problem when I connect to Kies is: "Your device's current firmware version is not supported to update firmware via Kies"
As far as I read on other posts, i have to change the CSC code.Can someone help me with that?I tried changing to some CSC's with the *#272*... but it did not work.What csc do i have to select?
Mention: my phone is not rooted, not flashed.Stock ROM!
Here are some details about my phone: PDA: S5670XWKQA / PHONE: S5670XWKQ3 / CSC: S5670OXFKQ4 /
Help please.
Download the Firmware from "samfirmware" and flash it through "Odin"
Press Thanks On Getting Helped
Thanks, but isn't there any other posibility?I still have warranty for the phone and don't want to void it.
Lawr3nce said:
Thanks, but isn't there any other posibility?I still have warranty for the phone and don't want to void it.
Click to expand...
Click to collapse
Updating via odin won't void your warranty
Or, you still have your warranty,so why don't you ask in service center to upgrade your firmware.
Ok, thanks a lot.
One last thing though: Can something bad/harmful for my phone happen if upgrade with Odin?Can you indicate me best thread that teaches correctly how to update via Odin?
Thanks in advance
Lawr3nce said:
Thanks, but isn't there any other posibility?I still have warranty for the phone and don't want to void it.
Click to expand...
Click to collapse
On the web site are official ROMs.
http://www.sammobile.com/firmware/
In Search type s5670 and you'll get Firmware for install. Install Firmware for your region. After install it via ODIN,
connect your phone with PC, open KIES and you'll get notification about Firmware that you have installed.
I do not think they should more receive such a notice, but notification that is your last firmware official.
Lawr3nce said:
Ok, thanks a lot.
One last thing though: Can something bad/harmful for my phone happen if upgrade with Odin?Can you indicate me best thread that teaches correctly how to update via Odin?
Thanks in advance
Click to expand...
Click to collapse
YOU are yourself your best guide..just READ READ and READ before you do anything with odin..its little risky,but not hard at all!
^follow this video..he has a video for 2.3.4 also,in case you have 4 files and not one package file
Watch 2-3 videos of upgrading galaxy fit in his playlist and you are good to go..
Lawr3nce said:
Ok, thanks a lot.
One last thing though: Can something bad/harmful for my phone happen if upgrade with Odin?Can you indicate me best thread that teaches correctly how to update via Odin?
Thanks in advance
Click to expand...
Click to collapse
The latest Update contains only "1 file" so it's much easier
Press Thanks On Getting Helped
Tutorial for install stock ROM:
http://www.samsdroid.com/2011/09/samsung-galaxy-fit-s5670-flashing.html
Photo for stock ROM with 1 file and 4 files:
I'm back again and still thinking about flashing with Odin.I have never done this before.I'm from Romania.Which 2.3.6 stock ROM should I get?From which country?which CSC?
Thanks
Lawr3nce said:
I'm back again and still thinking about flashing with Odin.I have never done this before.I'm from Romania.Which 2.3.6 stock ROM should I get?From which country?which CSC?
Thanks
Click to expand...
Click to collapse
pavel73 is from Romania. Best to ask him which stock ROM is installed.
So I am currently on the CM10.1 nightlies on my Canadian N8010. I'm now trying to reflash the stock rom back onto it, but I'm not sure which one to flash. samfirmware has stock roms for almost every contry, except for teh Canadian one. Does anyone know which rom i should be flashing, ie is there no Canadian one, and where i should find it?
alex13809 said:
So I am currently on the CM10.1 nightlies on my Canadian N8010. I'm now trying to reflash the stock rom back onto it, but I'm not sure which one to flash. samfirmware has stock roms for almost every contry, except for teh Canadian one. Does anyone know which rom i should be flashing, ie is there no Canadian one, and where i should find it?
Click to expand...
Click to collapse
I dont see it either., but lets say you have it, how would you install it?
Because that is my problem.
Fujiwarano said:
I dont see it either., but lets say you have it, how would you install it?
Because that is my problem.
Click to expand...
Click to collapse
I'm assuming this will work just fine.
http://forum.xda-developers.com/showthread.php?t=1945195
alex13809 said:
I'm assuming this will work just fine.
http://forum.xda-developers.com/showthread.php?t=1945195
Click to expand...
Click to collapse
Ah thank you.
I will update you if i find your stock firmware.
You Can Use ODIN On Your PC, Or Mobile ODIN On Your Device To Flash The Stock .tar Files....
I'd Try Sammobile.com For stock firmware...
ultramag69 said:
You Can Use ODIN On Your PC, Or Mobile ODIN On Your Device To Flash The Stock .tar Files....
I'd Try Sammobile.com For stock firmware...
Click to expand...
Click to collapse
Tried, they don't have one for Canada....
alex13809 said:
Tried, they don't have one for Canada....
Click to expand...
Click to collapse
Hey, i just chatted with a samsung support guy. He said there are no firmwares available on the website nor anywhere else.
You can only get updates with kies. but that is not the way you want it.....
Fujiwarano said:
Hey, i just chatted with a samsung support guy. He said there are no firmwares available on the website nor anywhere else.
You can only get updates with kies. but that is not the way you want it.....
Click to expand...
Click to collapse
wonderful, and kies just stays on the screen saying connecting...
alex13809 said:
wonderful, and kies just stays on the screen saying connecting...
Click to expand...
Click to collapse
you could try using a different language. but i dont know if it can damage your tablet.
Sock roms are interchangeable through regions. That's how most people got JB when it wa first released for Germany only....
Just be aware however that flashing a stock rom will change your CSC (region code), you will need to change back with the CSC Changer app available in app store HOWEVER, make sure to backup the contents on your Internal memory first or you will loose it.
First of all hi!
I have Samsung Galaxy Pocket (GT-s5300) and I have a bit problem with updating.
So my device says you have a new update:
When I press confirm it starts to load:
But then this appears:
I've tried to change region but no use:
Any help or at least response would be great.
Aurimazs said:
First of all hi!
I have Samsung Galaxy Pocket (GT-s5300) and I have a bit problem with updating.
So my device says you have a new update:
Any help or at least response would be great.
Click to expand...
Click to collapse
If you are rooted, then OTA updates will not work for you. Download a full update from Samsung site and flash it via cable from BB.
izzylaif said:
If you are rooted, then OTA updates will not work for you. Download a full update from Samsung site and flash it via cable from BB.
Click to expand...
Click to collapse
Not rooted, link please
Aurimazs said:
Not rooted, link please
Click to expand...
Click to collapse
download samsung kies and update it that way, otherwise if your willing to factory reset, download odin and the update firmware for your device and flash it that way.
Trozzul said:
download samsung kies and update it that way, otherwise if your willing to factory reset, download odin and the update firmware for your device and flash it that way.
Click to expand...
Click to collapse
Kies didn't worked.
Can't flash trough odin.
Other advices?
Aurimazs said:
Kies didn't worked.
Can't flash trough odin.
Other advices?
Click to expand...
Click to collapse
are you sure you phone is original and not a chineese clone?
Try droid tools for MTK based phones to detect if it is MTK based
izzylaif said:
are you sure you phone is original and not a chineese clone?
Try droid tools for MTK based phones to detect if it is MTK based
Click to expand...
Click to collapse
Original, link please
Aurimazs said:
Original, link please
Click to expand...
Click to collapse
dorid tools anly work on MTK devices, if yous is original, then it has a different chip not MTK