Related
About a week ago, I ordered a Case/Holster combo from Amazon. I already had a normal case, but I am a real holster kind of guy. I received it tonight (was apparently in my PO Box since Saturday ) and quickly tore my new toy open. Here are my impressions-
SkyTouch Hard Cover Combo Case Holster for AT&T Samsung Galaxy S II Skyrocket i727 (search this on Amazon to find it)
Cost- $12.98 ($8.99 + $3.99 s&h)
I love this case! Unlike the Otterbox's I had with my iPhones, there is almost no way this phone will fall out of this holster. It is blocked on both sides and the bottom. Comes out from top only. It slides in and out easily, but snug enough that you cant shake it loose. Of course, it sits face-in and the holster has a soft velvet type padding where the screen sits. The holster also serves as a kickstand.
Here is the only complaint/curiosity I have with it- The phone can only sit in the holster with the screen facing in, so the kickstand is pretty much useless. IT does not upset me really. Actually, it made me laugh a little at the oversight/absurdity. Still, this combo is a wonderful setup. I have included some pics for your viewing. I hope this helps someone who might be researching before purchasing a new case.
I ordered the SkyTouch case based on this review and like it. It provides a secure holster without the bulk of an Otterbox Defender.
For those looking for info on cases there is a thread here that discusses various cases.
Edit: The belt clip on the holster part of the case can not be removed but it does swivel allowing the holster to be used vertically or horizontally.
After using this for a couple of weeks I really like it. It is secure when in the holster. The ridged back makes a good grip surface. The snap on case for the phone provides protection but is minimalist in appearance. I feel it makes the phone look better rather than cover it up like a Commuter case does.
So ever since I owned my Evo 4G, I have found a kickstand an invaluable part of my daily phone use. Most phones don't come with them so I am always looking for a good kickstand case. Sadly, most of kickstand cases are not to my liking as they are either too thick, cover the sides but not the top and bottom of the phone, etc. The Seidio Surface w/kickstand for the S4 comes close but I don't like the cutouts for the buttons. It just feels awkward trying to push the buttons as I wish Seidio had covered them with TPU or silicone. My favorite non-kickstand cases are definitely the Diztronic TPU cases as they are very slim, fit perfectly, use high quality TPU, very reasonably priced, and provide good protection from everyday wear and tear. If only there was some way to add a kickstand to the Diztronic, this would be my perfect case.
So I then came across the following video where the guy added a Seidio kickstand to an Otterbox commuter and I figured I could do the same to my Diztronic case.
https://www.youtube.com/watch?v=uCb1jNmdS4s
So here is what I did:
1. Found the cheapest Seidio Surface with kickstand I could. Turns out it was a purple version made for the One X+. $8 with free Prime shipping on Amazon. Perfect.
2. I extracted the kickstand by simply pulling back the felt and popping the kickstand out.
3. Used the bottom half of the Seidio case (which now has an empty/vacant slot where the kickstand use to be) and positioned it inside the Diztronic TPU case.
4. Using a sharpie, I utilized the empty kickstand mold to trace the outline of the kickstand onto the inside of the Diztronic.
5. Used an exacto knife to cut out the outline I just traced onto the inside of the Diztronic. This left a hole/gap just the right size for the kickstand.
6. I slipped the kickstand in and secured it with black electrical tape.
7. Put my modified Diztronic case onto my S4 and done!
The kickstand is very secure and props the phone up perfectly in landscape mode. Its slim, covers all sides of the phone, has a nice lip, and buttons are easy to push. Glad to finally have my perfect kickstand case!
Wow.
Great work. I'm with you in that I love the Diztronic cases, but I would for sure mess this up haha.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I took a slight gamble buying this belt clip for the S3, but it fit perfectly with the bumper from Google (or Chinese replica), and its only $3.20 (shipped from the U.S.). The clip is great for the price with a soft felt inside and rugged outside with a 360 degree belt clip. The N4 slides in perfectly. and doesn't move. Here's the link:
http://www.amazon.com/gp/offer-listing/B008H34ZQW/ref=dp_olp_all_mbc?ie=UTF8&condition=all
Be sure to click buying options and add the third one down for $3.20 from LowerPriceUSA that ships from CA.
jt.61 said:
I took a slight gamble buying this belt clip for the S3, but it fit perfectly with the bumper from Google (or Chinese replica), and its only $3.20 (shipped from the U.S.). The clip is great for the price with a soft felt inside and rugged outside with a 360 degree belt clip. The N4 slides in perfectly. and doesn't move. Here's the link:
http://www.amazon.com/gp/offer-listing/B008H34ZQW/ref=dp_olp_all_mbc?ie=UTF8&condition=all
Be sure to click buying options and add the third one down for $3.20 from LowerPriceUSA that ships from CA.
Click to expand...
Click to collapse
Sounds great! Too bad I already have the Seidio Active and Surface holsters...the Seidio Active Holster for the N4 fits our phone with bumper. And the Surface for the N4 fits the N4 that has most tpu cases.
You have any pics of it installed? And how is the holster when trying to reach for it when a call or text comes in?
Will post some pics up tomorrow, but you need to slide the phone out for a phone call or text as it doesn't clip in. It can be worn horizontal or vertical.
Sent from my Nexus 4 using xda premium
I'll give it a shot for that price. Hopefully it will work with my Ionic case.
Erm ... not really.
Can anyone give some advice about a belt case/holster?
I'm thinking on the lines of this type http://www.amazon.co.uk/dp/B00OHFTPXM/ a horizontal case.
But, this don't usually last that long.
So, I was thinking about http://www.amazon.co.uk/Urvoix-Case-Cover-Samsung-Galaxy/dp/B00S6DQ37W/ a vertical canvas style.
But, I'm unsure using it with a belt and in vertical orientation would it just get in the way, sitting down, driving etc?
I'll probably be buying a case for the phone too.
Any advice please.
Thank you
I used to use belt holsters and cases but problem is this phone is so big the cases look like fanny packs Lol.
With that out of the way, I think the horizontal holders are better for when you sit down.
I'm using a Seidio CAPSA exoskeleton holster in horizontal orientation, with a UAG case. They fit perfectly together. If you search the forums someone on here has posted photos of this combination. If you rotate it to vertical it does get in the way a little when sitting down, so I use it horizontal.
http://www.seidioonline.com/samsung-galaxy-note-4-capsa-touchview-holster-p/hl4ssgt4ast.htm
DarkManX4lf said:
I used to use belt holsters and cases but problem is this phone is so big the cases look like fanny packs Lol.
With that out of the way, I think the horizontal holders are better for when you sit down.
Click to expand...
Click to collapse
Kinsman-UK said:
I'm using a Seidio CAPSA exoskeleton holster in horizontal orientation, with a UAG case. They fit perfectly together. If you search the forums someone on here has posted photos of this combination. If you rotate it to vertical it does get in the way a little when sitting down, so I use it horizontal.
http://www.seidioonline.com/samsung-galaxy-note-4-capsa-touchview-holster-p/hl4ssgt4ast.htm
Click to expand...
Click to collapse
Thank you both very much
I use an Otterbox Defender w/holster & don't have any issues sitting down w/ the phone in the landscape/horizon mode. I do take the phone off my belt in the car to use my Craig's Docks car dock/mount. I think your physique has a lot to do with the comfort of the phone when seated. I also have a horizontal nylon belt pouch I got from Amazon that fits the phone with the Defender case but I've never used it because I've had no problems with the Defender's holster. The nylon pouch would be very useful if you're in a warm climate & it's raining & you're outside a lot.
One thing I really like about the Defender holster is it allows the phone to be placed in the screen out position so I can see/use the screen when it's clipped on my belt (it's of course less protection than screen in but for me the functionality outweighs that). I do agree that the size of the N4 looks like you've got a tablet on your belt, it does look ridiculous but it is what it is.
The Defender is a high quality precision made case IMO and if you buy one online make sure you buy it either directly from Otterbox or directly from Amazon (not a third party reseller) as counterfeiting is rampant with them. Also you have to remove the included plastic screen protector & use something else for clarity & to prevent the constant dirt that accumulates through the opening for the home key w/ the installed screen protector.
I haven't used the exact same one that you listed, but I used a very similar design holster for my gs1 and that fake pleather material wore out pretty quick by the belt area. I can't believe I paid $15 for that. If you want to go vertical, I personally recommend it on the side. Would interfere if worn near the front. Out of those 2, I would say the nylon holster would last longer because of the 1000d cordura nylon, but I can't speak for the overall quality. The stitching might be shoddy and stuff could fall apart easily.
I used the supcase beetle case with holster, but the case and holster broke. The case could not take a huge impact. I wore the holster on my side horizontally and broke the belt clip getting out of the car. I am currently using a cheap otterbox defender type case with holster.
mty msi said:
I use an Otterbox Defender w/holster & don't have any issues sitting down w/ the phone in the landscape/horizon mode. I do take the phone off my belt in the car to use my Craig's Docks car dock/mount. I think your physique has a lot to do with the comfort of the phone when seated. I also have a horizontal nylon belt pouch I got from Amazon that fits the phone with the Defender case but I've never used it because I've had no problems with the Defender's holster. The nylon pouch would be very useful if you're in a warm climate & it's raining & you're outside a lot.
One thing I really like about the Defender holster is it allows the phone to be placed in the screen out position so I can see/use the screen when it's clipped on my belt (it's of course less protection than screen in but for me the functionality outweighs that). I do agree that the size of the N4 looks like you've got a tablet on your belt, it does look ridiculous but it is what it is.
The Defender is a high quality precision made case IMO and if you buy one online make sure you buy it either directly from Otterbox or directly from Amazon (not a third party reseller) as counterfeiting is rampant with them. Also you have to remove the included plastic screen protector & use something else for clarity & to prevent the constant dirt that accumulates through the opening for the home key w/ the installed screen protector.
Click to expand...
Click to collapse
burntrat said:
I haven't used the exact same one that you listed, but I used a very similar design holster for my gs1 and that fake pleather material wore out pretty quick by the belt area. I can't believe I paid $15 for that. If you want to go vertical, I personally recommend it on the side. Would interfere if worn near the front. Out of those 2, I would say the nylon holster would last longer because of the 1000d cordura nylon, but I can't speak for the overall quality. The stitching might be shoddy and stuff could fall apart easily.
I used the supcase beetle case with holster, but the case and holster broke. The case could not take a huge impact. I wore the holster on my side horizontally and broke the belt clip getting out of the car. I am currently using a cheap otterbox defender type case with holster.
Click to expand...
Click to collapse
Awesomes x2 Thank you
I think we can close this one now, if needed :good:
http://www.seidioonline.com/samsung...-kickstand-combo-black-p/bd2-hr3ssgt4k-bk.htm
iv been using the seido surface for about 6-7 months now and its still working great, spring on the holster still seems as strong as brand new, and its pretty slim compared to the other case+holster combos. it provides plenty of protection, iv dropped my phone at least 10 times since november, each time onto hard surface floors from about waist high (im 5 foot 11), and each time i remove the case to see what damage i caused and surprised to see that my phone itself still it perfect cosmetic condition. no scratches or scuffs anywhere on the edges or corners. phone sits pretty snug into the clip, it has NEVER came off on its own. if something were to go wrong with this case ill definitely buy another one.
Read my thread about Seidio & buying form their online store.
http://forum.xda-developers.com/note-4/accessories/dont-want-to-buy-seidios-webstore-t3036913
I have to initiate a chargeback w/ the bank that issued the credit card I used to get a refund. Seidio refunded zero.
Seido's online store is a joke if you have a problem w/ one of their products. By far the worst experience I've ever had purchasing online.
The Surface is a decent case but completely overpriced. Only reason I got one was to turn into the Surface w/ holster which was complete garbage, both the case & the holster. Everytime I moved the phone fell off the beltclip, is was unusable. And yes, I did have the case locked to the beltclip.
For the price Seidio charges for the Surface it should have rocker switch covers at a bare minimum. You can spend a fraction of the cost of a Surface & get a far nicer case.
Best Buy sells the Surface as their Platinum series at half the price Seidio charges.
IMO Seidio = garbage.
Maxpedition
Ever since I starting using tactical pouches with my iPhone 5s, I have continued to do so with my Note 4. I use Maxpedition pouches, as they are made of 1050d ballistic nylon. They are quite excellent.|
When I'm at work, during my food vendering stuff, I use their TC-3 pouch. However, I rock their leg pouch for any other events. Since I run around with no case on my phone except for the leg pouch and the small pouch that my phone and cards slip in, I am quite pleased with the setup. Excellent durability and I can carry my expensive IEMs, wallet, phone, and a couple extras with no problem.
Thank you all for the additional post and information
After a lot of head scratching I ordered the vertical case (2nd link in my OP).
I'll use it as a starting point and try other cases once I get my Note 4 through the post.
Am looking for a belt clip or holster.
Have used seido for all my previous phones. No such case for this one?
I use this one from Walmart
The blackberry priv holster fits it perfectly FWIW!
Just a thought
Love my Essential phone but have always used a holster case. Nothing specific yet but PDAir Leather holster from Cases.com for Galaxy S7 is a precise fit and E-grips from Amazon cut into narrow strips for the sides of the phone give great grip.
Just a thought.
when I look for a belt clip/holster I want something that lasts. Any of the plastic clips either broke when sitting down in tight spaces or fell apart (I had three of them). I eventually went with TurtleBack holsters. You pay premium, but it's worth every penny. I've been using a 6.25" for a larger phone now for over a year and it still looks great (Nylon).
based on the PH-1's dimensions:
Height: 141.5mm = 5.57 inches
Width: 71.1mm = 2.8 inches
the 5.5" X 3" here should work.
If you will use a case then the next size up (5.87" X 3.25") should work great.
https://cdn3.bigcommerce.com/s-dom6...dm-iphone-dual._836__62182.1426190383.jpg?c=2
$26 with free shipping
I just ordered the larger of the two. The holster I have now is too roomy and the phone moves too much. I'll update this with pictures once I get it.
xela19115 said:
I use this one from Walmart
Click to expand...
Click to collapse
HA! I got the exact same one today! Size Large (the extra large seemed a little too big)
For $9.98 it works fine, I bought another one on EBay but it was too tight - every time I put it in the holster the elastic sides would press against the power button, causing the phone to either turn and stay on, or go into bootloader mode! No good, so had to return it; this one from Walmart was cheaper and works better.
Now I want to add the Olixar Ultra-Thin Phone Case bumper guard when it comes out - hopefully the phone will still fit into this holster case.
SimpTheChimp said:
HA! I got the exact same one today! Size Large (the extra large seemed a little too big)
For $9.98 it works fine, I bought another one on eBay but it was too tight - every time I put it in the holster the elastic sides would press against the power button, causing the phone to either turn and stay on, or go into bootloader mode! No good, so had to return it; this one from Walmart was cheaper and works better.
Now I want to add the Olixar Ultra-Thin Phone Case bumper guard when it comes out - hopefully, the phone will still fit into this holster case.
Click to expand...
Click to collapse
I reached out to MobileFun.com a few weeks ago about that Olixar case and they absolutely have no ETA on that. My guess, never. I am using Incipio NGP Pure clear case and it works just fine with that holster.
I just ordered this: https://www.ebay.com/itm/PREMIUM-Le...var=541282532750&_trksid=p2057872.m2749.l2649
Looks like a good holster.
here is an update on the premium turtleback holster with pictures. Perfect fit with Incipio case.
It's of the quality of a gun holster, almost unbreakable.
derausgewanderte said:
here is an update on the premium turtleback holster with pictures. Perfect fit with Incipio case.
It's of the quality of a gun holster, almost unbreakable.
Click to expand...
Click to collapse
Is it easy to put it in and out? Or, is it tight?
goldentequila said:
Is it easy to put it in and out? Or, is it tight?
Click to expand...
Click to collapse
Yes, it's pretty much perfect for me
Anybody got the Olycism Essential PH-1 Phone Case cover (search for 'Olycism Essential PH-1 Phone Case cover' @ Amazon)? I like what I am seeing because I like having a recessed opening (rather than covers) for the side buttons.
Just wondering if anyone had one and what they thought of it.
Seidio
Cowbell_Guy said:
Am looking for a belt clip or holster.
Have used seido for all my previous phones. No such case for this one?
Click to expand...
Click to collapse
I also like Seidio. I sent them an email and got a VERY fast response. They do not intent to make a case for the Essential Phone at this time.
Just stumbled upon a Seidio-style clam case & holster. I got hooked on these years ago, when Verizon sold them for each of their smartphones for $29. The rigid clam cases have protected my phones so well I've almost always been able to resell them as ""mint" condition, top dollar. The matching belt holster protects the glass while still allowing me to remove & use the phones one-handed. I'd given up on getting a clam case/holster for my Essential, though, rationalizing that the production numbers were too small. Then I stumbled across the picture (attached). Ordered mine today from Amazon. It's on eBay, too, but eBay's system wasn't working, failed (repeatedly) at the credit card info screen. The previous clam case/holster combos I've bought were all of a fine, tough plastic with a film of rubber texture overlaid & a velvety material on the inside of the holster that protected the phones' screens. This set appears to be the same but I haven't used it or even received it so I don't yet know if this product will be of the same rugged quality.
Here's the Amazin link:
https://www.amazon.com/gp/product/B078PS4VKJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://photos.app.goo.gl/fiawdLwMnn5ir5l03
roebling said:
Just stumbled upon a Seidio-style clam case & holster. I got hooked on these years ago, when Verizon sold them for each of their smartphones for $29. The rigid clam cases have protected my phones so well I've almost always been able to resell them as ""mint" condition, top dollar. The matching belt holster protects the glass while still allowing me to remove & use the phones one-handed. I'd given up on getting a clam case/holster for my Essential, though, rationalizing that the production numbers were too small. Then I stumbled across the picture (attached). Ordered mine today from Amazon. It's on eBay, too, but eBay's system wasn't working, failed (repeatedly) at the credit card info screen. The previous clam case/holster combos I've bought were all of a fine, tough plastic with a film of rubber texture overlaid & a velvety material on the inside of the holster that protected the phones' screens. This set appears to be the same but I haven't used it or even received it so I don't yet know if this product will be of the same rugged quality.
Here's the Amazin link:
https://www.amazon.com/gp/product/B078PS4VKJ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://photos.app.goo.gl/fiawdLwMnn5ir5l03
Click to expand...
Click to collapse
Just received mine from eBay.
The case itself provides good protection for the back of the phone and the sides, but does not protect the top and bottom of the phone where the ceramic meets the display glass. With the phone in the holster, all edges are protected.
The kickstand is actually pretty useful.
Unlike Sedio, the phone does not "click" in and out of the holster. Rather, you have to slide it in and out, which takes a bit more focus.
The best surprise is the tempered glass protector. It covers the entire display including the camera. It has a black border that matches the display perfectly. It also has clear areas for the sensors around the front camera. It only has adhesive along the border but the glass matches the case perfectly, so the edges don't lift up. No Halo or rainbow effect. Only negative is the fingerprints are more visible.
All in all, I'm going to use this combo, as I need a belt holster for my line of work.
Sent from my PH-1 using Tapatalk
I was wondering if the Sedio spring clip holster for the iPhone X would fit? The PH-1 is just a little shorter but otherwise the same size.
Cowbell_Guy said:
Am looking for a belt clip or holster.
Have used seido for all my previous phones. No such case for this one?
Click to expand...
Click to collapse
https://www.reddit.com/r/essential/comments/7z1vp7/holster_for_tudia_case/?utm_source=reddit-android
Sent from my PH-1 using Tapatalk
Just wondering if we have better solutions after all this time. What are people using?
This is what I'm using: https://www.amazon.com/gp/product/B017HVSF2O/. It fits good and holds well. The height and width are perfect but the depth of the PH-1 is less than the iPhone 6/6S with Otterbox case that the holster is designed for. This makes the lower clips protrude and catch on things every now and again.
https://imgur.com/a/1GZ8W0p
fastoy said:
This is what I'm using: https://www.amazon.com/gp/product/B017HVSF2O/. It fits good and holds well. The height and width are perfect but the depth of the PH-1 is less than the iPhone 6/6S with Otterbox case that the holster is designed for. This makes the lower clips protrude and catch on things every now and again.
https://imgur.com/a/1GZ8W0p
Click to expand...
Click to collapse
Thanks for sharing. I wonder if it would fit perfectly if we put PH-1 in a thicker case like these? They are both triple-layer cases, so I'm guessing they an add a good thickness.
https://www.ebay.com/itm/Shockproof...13.TR12.TRC2.A0.H0.Xessential+phone+case.TRS0
https://www.ebay.com/itm/Case-For-E...13.TR12.TRC2.A0.H0.Xessential+phone+case.TRS0