I am pretty much a noob but I really enjoy this Infuse and the different ROMS I have been testing. This site is really great and I thank and really appreciate all the hard work and time that goes into this site.
I was running Caty Rom and though I would try Zeus 3.
I followed the directions and all I see now is a 'SAMSUNG' screen that flickers on and off occasionally. I have tried twice now to install Zeus 3.
I will go back to Caty now but If anyone has seen this I would really like to try Zeus3.
I have a red CWM. Does that mean anything?
you wont get a good answer if you dont post in the right place ..they dont like it ..repost here:
http://forum.xda-developers.com/showthread.php?t=1413488
good luck!!
Ok Thanks. I will do that.
I am back on Caty and very happy so no worries here.
madpb said:
Ok Thanks. I will do that.
I am back on Caty and very happy so no worries here.
Click to expand...
Click to collapse
To go from Caty uckj4 to zeus uckl2, you may need to do a full wipe and factory reset if you did not do that the first time.
back up what ever data or apps you had.
go to cwm. factory reset. wipe cache. goto advance: wipe dalvik and fix permisiion.
go back to main. go to mount: format system, data and cache.
then install zeus
if that doesnt work,
Here is h8rift's Odin UCKD5 Return to Stock with ROOT + 3e Recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
use the first package.
factory reset, wipes etc
then flash zeus
gl
http://forum.xda-developers.com/showthread.php?t=1318160
This is JordanElliott's guide to flash a rom with no problems. I've used it a dozen times and it always comes through for me.
Zeus is for advanced users...if your new to flashing i suggest flashing something else to get used to the process
Sent from my SAMSUNG-SGH-I997 using xda premium
dman3285 said:
Zeus is for advanced users
Click to expand...
Click to collapse
Clever "filter", I must say
qkster said:
To go from Caty uckj4 to zeus uckl2, you may need to do a full wipe and factory reset if you did not do that the first time.
back up what ever data or apps you had.
go to cwm. factory reset. wipe cache. goto advance: wipe dalvik and fix permisiion.
go back to main. go to mount: format system, data and cache.
then install zeus
if that doesnt work,
Here is h8rift's Odin UCKD5 Return to Stock with ROOT + 3e Recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
use the first package.
factory reset, wipes etc
then flash zeus
gl
Click to expand...
Click to collapse
Ok great , good directions. I will give that a try.. If i remember correctly when I went to look at 'mount: format system'
it asked for a size. I did not know what to choose.
Thanks qkster
Related
I'm currently using Eagleblood v1.8 without any problems...but when i installed Eagleblood v1.9 the phone does not start on boot up..after trying to boot it a minimum 5 times, then the phone out of nowhere boots up!
tried wiping data,cache,dalvik cache..
Any solutions to it?
didnt know that ver 1.9 was ready, Installing now will let ypo u know if I get the same problem.
Were you using 1.8 for 2.3.3, or 1.8 for 2.3.5?
Either way, since you said you already wiped your data, you might as well format /system. You'll need to reinstall your apps, but you'll have a clean install.
Wipe cache
Advanced --> Wipe Dalvik
Mounts and Storate --> format /system
Wipe data/factory reset
Flash rom
Flash gapps
Advanced --> fix permissions
Reboot
Same thing happened to me just go back to recovery do a full wype and flash the rom again and your good to go
mmapcpro said:
Were you using 1.8 for 2.3.3, or 1.8 for 2.3.5?
Either way, since you said you already wiped your data, you might as well format /system. You'll need to reinstall your apps, but you'll have a clean install.
Wipe cache
Advanced --> Wipe Dalvik
Mounts and Storate --> format /system
Wipe data/factory reset
Flash rom
Flash gapps
Advanced --> fix permissions
Reboot
Click to expand...
Click to collapse
I'm using 1.8 on 2.3.5
followed all of the above steps mentioned..
same boot problem...
gypsy214 said:
Same thing happened to me just go back to recovery do a full wype and flash the rom again and your good to go
Click to expand...
Click to collapse
i did try that...i tried factory resetting via privacy settings and performed wipe, still no use...
i also installed version 1.07 which has morfics kernel..v 1.07 works fine..tried installing 1.9 again...same problem
OK if u downloaded it from the directdownload, don't do that that one was messed up for me too, download the one from multi-upload and see if that works
Sent from my LG-P999 using XDA App
i found a weirdo solution to it...every time i have to install a fresh copy of morfics kernel to start the phone...
if i reboot...phone doesn't start....for god knows what reason!
it only starts after wiping cache,dalvik n flashing kernel!
Any better solution?
demonkicks said:
i found a weirdo solution to it...every time i have to install a fresh copy of morfics kernel to start the phone...
if i reboot...phone doesn't start....for god knows what reason!
it only starts after wiping cache,dalvik n flashing kernel!
Any better solution?
Click to expand...
Click to collapse
Hey DemonKicks, are you using a REFURBISHED G2X?? Have you done a warranty exchange at ANY TIME on your handset?
I am having problems with EaglesBlood 1.8, 1.9, and a couple other ROMS. I think that my REFURBISHED HANDSET is to blame!!
TeldenW said:
Hey DemonKicks, are you using a REFURBISHED G2X?? Have you done a warranty exchange at ANY TIME on your handset?
I am having problems with EaglesBlood 1.8, 1.9, and a couple other ROMS. I think that my REFURBISHED HANDSET is to blame!!
Click to expand...
Click to collapse
not a refurbished piece....anyways i cant exchange it.. warranty void
if you downdoaded the one from the direct download that one is messed up, try the one from multiupload
is this anywhere related to chip stability issue??
phone heats up
When in clockwork recovery go to mounts/storage then format/system then reflash Rom..find yourself a kernel while your at it ...try MORFIC's T15 or faux's 0.4.1 if you want to try undervolting..
Sent from my LG-P999 using xda premium
rymenigmatic said:
When in clockwork recovery go to mounts/storage then format/system then reflash Rom..find yourself a kernel while your at it ...try MORFIC's T15 or faux's 0.4.1 if you want to try undervolting..
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
tried morfics t15 didnt work.....stock version cm7 faux's 0.4.1 works...thanks..
You got it...by the way 0.4.2 is out..
Sent from my LG-P999 using xda premium
Ok first of all, this is my dad's phone he wanted rooted with a custom ROM. I'm not new at all to flashing but I have the Droid X and Droid Bionic so I only know MOto. SO I performed the root (*****) and installed CM7 build on his Evo. A week later he was experiencing ploblems with gmail and GPS and not wanting to constantly hear complaining, I opted to install a new ROM that had an RC build . I chose Synergy with god mode (wanting to wipe it twice) and proceeded with the dalvik and cahce wipes only. I didn't format sys because the op didn't state that I had to.....well I left his house letting the ROM settle and now its in a bootloop. He's telling me via gtalk that it trys to come on but says "storage is full" and "android.acor" has stopped. Any solutions that I can give him to get him back up and running?
Did you nandroid...if so just restore that
Sent from my PC36100 using XDA App
You'll have to flash a new rom or restore a previous backup (if any was made).
jboyer0000 said:
Did you nandroid...if so just restore that
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I made a CWM back-up but how do I get back into CWM recoovery to flash?
Theonew said:
You'll have to flash a new rom or restore a previous backup (if any was made).
Click to expand...
Click to collapse
How do I flash the new ROM? It's bootlooped and I have no idea how to get to his CWM recovery from a bootloop.
jkoldha said:
How do I flash the new ROM? It's bootlooped and I have no idea how to get to his CWM recovery from a bootloop.
Click to expand...
Click to collapse
Turn off the device, hold down the volume button and then the power button.
make sure you follow the 3 main steps before flashing/ restoring any rom or backup
1. wipe data/factory reset
2. wipe cache
3. go to advance->wipe dalvik
then proceed, and even though your motorola, it's the same through out all the phones
(have a photon and an evo3d)
A2CKilla said:
make sure you follow the 3 main steps before flashing/ restoring any rom or backup
1. wipe data/factory reset
2. wipe cache
3. go to advance->wipe dalvik
then proceed, and even though your motorola, it's the same through out all the phones
(have a photon and an evo3d)
Click to expand...
Click to collapse
Yea I should've data wiped but it said it would....
I always just restore to my previous rom the when I go to flash a new one I use amon ra recovery and wipe everything 3X before flashing.
Sent from my highspeed rooted Evo.
Hey, not sure of what I need to do. I have read things for clean installs, then things to unbrick your phone. I haven't seen anything for installing a newer rom.
I have the GingerBread unbloated root ROM. Nothing crazy. I want to install the newest Eclipse ROM. I downloaded the eclipse file. However, not 100% sure how to install this. When I installed my previous rom i did it with Odin. Can anybody point me in the right direction?
Isn't there an Odin for eclipse? If not you need to Odin cwm and then flash eclipse through that. Portip: you need to go into cwm on the first reboot or you will have to start over
Charged up post!
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
cnoevl21 said:
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
Click to expand...
Click to collapse
If you're coming from another Rom, it is highly recommended to do full wipe. Factory data, cache, dalvik. Mount system first, then flash Rom.
Sent from my SCH-I510 using xda premium
cnoevl21 said:
Go here to install CWM http://forum.xda-developers.com/showthread.php?t=1106608 Once you have CWM save whatever you need to save in Titanium Backup or Google or however u save ur stuff; make sure the ROM u want is on ur SD card (kernel too, i suggest PJB if u dont have it already) and power off ur phone. then boot into CWM (Vol up, home, and power together until u see the samsung logo, then let go of power button but hold the other two until you see the text this is CWM)
You dont HAVE to do a wipe data/factory reset, but it is highly suggested. wipe cache. go to advanced and wipe dalvik. Then just choose flash file from sd card, choose ur ROM and ur done.
Click to expand...
Click to collapse
Where is this PJB kernel?
Can I follow this procedure coming from deodexed EP4D debloated running Imnuts kernel (4.0. something) and EXT4?
Edit: its Imoseyon's kernel.
Sent from my SCH-I510 using Tapatalk
talty09 said:
Where is this PJB kernel?
Click to expand...
Click to collapse
http://rootzwiki.com/topic/137-01-30-12peanutbutta-jelly-time/
Yes, that's exactly what I did. I installed the newest CWM first (You can find the thread in the development section) and then I installed eclipse v1.4 over the debloated/deodexed EP4D. Wipe data, cache, and Dalvik cache of course before installing the new ROM. Reboot and then go back into recovery and install PBJ 0130 kernel and you'll be good to go. Also, if you run into superuser problems, like losing root access, just reinstall the newest superuser in CWM.
Sent from my SCH-I510 using XDA App
wpgibson said:
Can I follow this procedure coming from deodexed EP4D debloated running Imnuts kernel (4.0. something) and EXT4?
Edit: its Imoseyon's kernel.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
yes but not recommended...use pb&j...
Use imoseyon's kernel to convert to EXT4, then go back and flash pbj
Sent from my SCH-I510 using xda premium
So get the newest version of CWM, get PBJT, use odin to put on CWM, flash the PBJT kernel, Wipe data, davik, cahce, then flash the eclipse rom?
talty09 said:
So get the newest version of CWM, get PBJT, use odin to put on CWM, flash the PBJT kernel, Wipe data, davik, cahce, then flash the eclipse rom?
Click to expand...
Click to collapse
Yes but I flashed the new ROM first after wiping everything and then installed the new kernel (0130 PBJ) after first full boot on the new ROM.
Sent from my SCH-I510 using XDA App
does it matter? either way then i will follow what you said. Flash CWM, wipe data, Flash ROM, then PBJT?
Superuser through CWM
ewh1292 said:
Yes, that's exactly what I did. I installed the newest CWM first (You can find the thread in the development section) and then I installed eclipse v1.4 over the debloated/deodexed EP4D. Wipe data, cache, and Dalvik cache of course before installing the new ROM. Reboot and then go back into recovery and install PBJ 0130 kernel and you'll be good to go. Also, if you run into superuser problems, like losing root access, just reinstall the newest superuser in CWM.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
That procedure worked like champ. .... except:
as you suggested, Superuser lost root access.
I'm sure this is a noob question, but where/how do I plug SuperUser in through CWM. I assume there is a zip that I can load once i'm up in CWM recovery. If so, would you be kind enough to point in the right direction to get it? (I know, search is my friend, but I'm on a tight clock today.)
[EDIT] - I ran "Fix permissions" in CWM. Rebooted, and it had SU working properly.
I also Found a SuperUser Pack that is a .Zip file over at Tom's world that's flashable through CWM. I didn't use it, but I did download it.
Many thanks. You got me on Eclipse in a record amount of time.
talty09 said:
does it matter? either way then i will follow what you said. Flash CWM, wipe data, Flash ROM, then PBJT?
Click to expand...
Click to collapse
I don't know if it matters, but it worked for me, so it's ultimately up to you what you do with your phone lol. So the answer to your question is yes.
Sent from my SCH-I510 using XDA App
wpgibson said:
That procedure worked like champ. .... except:
as you suggested, Superuser lost root access.
I'm sure this is a noob question, but where/how do I plug SuperUser in through CWM. I assume there is a zip that I can load once i'm up in CWM recovery. If so, would you be kind enough to point in the right direction to get it? (I know, search is my friend, but I'm on a tight clock today.)
[EDIT] - I ran "Fix permissions" in CWM. Rebooted, and it had SU working properly.
I also Found a SuperUser Pack that is a .Zip file over at Tom's world that's flashable through CWM. I didn't use it, but I did download it.
Many thanks. You got me on Eclipse in a record amount of time.
Click to expand...
Click to collapse
Cool, glad I could help out although you did everything so great job!
Sent from my SCH-I510 using XDA App
So I'm coming from Synergy Nightlies 73. Using TWRP2.2 I did the normal steps before loading a new ROM. ( Cache Wipe, Dalvik Wipe, System Wipe) Once I flashed the JellyWiz Beta 4 ROM the phone booted up just fine. However, it froze within a matter of seconds and I had no functionality. I pulled the battery a few times and each time the phone would freeze. I had to restore my previous ROM. Any ideas or has anyone had this problem? I really want to try out the new JellyWiz.
topd823 said:
So I'm coming from Synergy Nightlies 73. Using TWRP2.2 I did the normal steps before loading a new ROM. ( Cache Wipe, Dalvik Wipe, System Wipe) Once I flashed the JellyWiz Beta 4 ROM the phone booted up just fine. However, it froze within a matter of seconds and I had no functionality. I pulled the battery a few times and each time the phone would freeze. I had to restore my previous ROM. Any ideas or has anyone had this problem? I really want to try out the new JellyWiz.
Click to expand...
Click to collapse
try formatting system.
tu3218 said:
try formatting system.
Click to expand...
Click to collapse
1+
with cwm, it would be under mount and storage>format system/data/cache.
I don't use twrp but I'd think there's a similar option.
Also check md5 to make sure you have a good download.
Sent from a SYNERGIZED GalaxySIII
tu3218 said:
try formatting system.
Click to expand...
Click to collapse
I don't see that option(format system) anywhere. I went under wipe and wiped Cache, Dalvik, and System. I did try to select the Format Data but that option failed multiple times.
epagib said:
1+
with cwm, it would be under mount and storage>format system/data/cache.
Idont use twrp but I'd think there's a similar option
Also check md5 to make sure you have a good download.
Sent from a SYNERGIZED GalaxySIII
Click to expand...
Click to collapse
I've always used CWM without any problems until recently. It wasn't creating back up of my ROM. So I made the switch to TWRP which seems to work fine when loading other Synergy builds. I checked the MD5 and it was good. I may have to go back to CWM however, without a back up I'm afraid to flash anything.
topd823 said:
I've always used CWM without any problems until recently. It wasn't creating back up of my ROM. So I made the switch to TWRP which seems to work fine when loading other Synergy builds. I checked the MD5 and it was good. I may have to go back to CWM however, without a back up I'm afraid to flash anything.
Click to expand...
Click to collapse
Yeah, know what you mean about not having a backup. It always a hassel installing everything from scratch.
Have been using cwm 6012. Never had a problem making backups....or anything else.
But yes I'd try the system format along with clean wipe before installing Incubus beta4. I'm testing it right now too. Has few minor bugs, but overall very fast and slick
Sent from a SYNERGIZED GalaxySIII
epagib said:
Yeah, know what you mean about not having a backup. It always a hassel installing everything from scratch.
Have been using cwm 6012. Never had a problem making backups....or anything else.
But yes I'd try the system format along with clean wipe before installing Incubus beta4. I'm testing it right now too. Has few minor bugs, but overall very fast and slick
Sent from a SYNERGIZED GalaxySIII
Click to expand...
Click to collapse
So I went back to CWM Touch 5.8.4.9 everything worked like a charm. I was able to back up and install Incubus Beta 4. When I was using CWM I realized when you wipe data it says factory reset. Which is an option on TWRP in the wipe menu. So I believe that's what I was doing wrong. Operator error! Thanks for the the replies.
I haven't been able to get wifi tether to work on Beta 4. I'm going to search the forums for the solution. Just wondering if you've had an issue?
So i was in Audiophile ICS ROm, and trying to move to Rem ICS 1.2, wiped data, cache and dalvik, flashing the rem ics.
Reboot to system was chosen, but instead to the system, it KEPT going back to the recovery.
I have tried flashing miui ics and audiphile ICS again but it KEPT going back to recovery.
Please help!
doc_v15 said:
So i was in Audiophile ICS ROm, and trying to move to Rem ICS 1.2, wiped data, cache and dalvik, flashing the rem ics.
Reboot to system was chosen, but instead to the system, it KEPT going back to the recovery.
I have tried flashing miui ics and audiphile ICS again but it KEPT going back to recovery.
Please help!
Click to expand...
Click to collapse
You have to do a factory reset before flashing.
If that still doesn't work, try flashing eollie's oneclick here, and flash the rom from the 5.0.2.8 recovery.
I did. But still
doc_v15 said:
I did.
Click to expand...
Click to collapse
You did... what?
doc_v15 said:
But still
Click to expand...
Click to collapse
But still, I'm asking for details to help you out.
bhundven said:
You did... what?
But still, I'm asking for details to help you out.
Click to expand...
Click to collapse
I did factory reset but still the same, kept coming back to recovery
Sent from my HTC One XL
So do the other part of what he said. Which you apparently haven't done, even though you generically said you did in response to his directions.
bhundven said:
If that still doesn't work, try flashing eollie's oneclick here, and flash the rom from the 5.0.2.8 recovery.
Click to expand...
Click to collapse