Welcome Finally You have made it here. Well now I know that you are little worried bout your phone but Let me tell you that there is noting to worry about.
Make sure you are relaxed because if you are tensioned than you will most likely screw things up. Do me a favor and watch this video. Relax get beer or Watch Funny videos on Youtube.
“Never ever unplug your phone when you are Flashing”
Drivers You will need!
! Odin 1.85
!! USB Drivers
!!! Skyrocket Stock Recovery.tar file ATT Or Rogers
Extract the contents of odin-185.zip and the 7zip archive.
Run Odin3+v1.85.exe, and prepare Odin:
Check "auto-reboot", and uncheck all other options.
Install Usb Drivers and Unzip the Recovery file and put it to safe place.
Main Process.
Try to get in Download Mode.
) Connect USB to computer but not your Phone.
))Take out and put back in the battery.
)))Then, hold Vol + and Vol - , now plug in USB and you will at the following screen that’s in picture.
))))Press Volume Up button now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally You have made it to Download mode.
If in case this does not work for you than and you are still luck enough to go into CWM than do factory reset and flash any stock rom. And do all this steps again.
Ok so after getting into Download Mode.
-Go ahead and Go to Odin (Check "auto-reboot", and uncheck all other options).
--In Odin check PDA and find the recovery.tar file that you downloaded.
Now Press Start (Check "auto-reboot", and uncheck all other options.)
When you are done Your screen will look like one below.
It should now reboot to recovery and delete cache and data. Then, it will boot.
Reserved for more info.
Reserved for more info!!
You may want to mention that using a jig to get into download mode will keep you from tripping the flash counter (ie no yellow triangle warning screen).
But, if you've already tripped the counter anyways it really doesn't matter (and no, using a jig will not reset the flash counter...).
well there is no yellow triangle because one click root is good and talking about flash counter usb jig does not reset the flash counter.
skrambled said:
You may want to mention that using a jig to get into download mode will keep you from tripping the flash counter (ie no yellow triangle warning screen).
But, if you've already tripped the counter anyways it really doesn't matter (and no, using a jig will not reset the flash counter...).
Click to expand...
Click to collapse
appdroid said:
well there is no yellow triangle because one click root is good and talking about flash counter usb jig does not reset the flash counter.
Click to expand...
Click to collapse
One Click doesn't trip flash counter for rooting but you still need to get into download mode from a soft brick without tripping it (if you care about that sort of thing...not sure I do...)
Sent from my SAMSUNG-SGH-I727 using XDA App
I don't know what happen, but when I download Skyrocket Stock Recovery.tar file for AT&T my counter had +1.
And I find it's a custom rom ! Not samsung official!
Don't flash it!
If want go back to stock use this one: SGH-I727_ATT_ I727UCKJ2_I727ATTKJ2.rar (search in this forum). I used it, all ok.
And, Does anyone know how to reset counter for skyrocket i727? Please help! (I had use an lastest USB JIG - but not working! )
nhattan221982 said:
I don't know what happen, but when I download Skyrocket Stock Recovery.tar file for AT&T my counter had +1.
And I find it's a custom rom ! Not samsung official!
Don't flash it!
If want go back to stock use this one: SGH-I727_ATT_ I727UCKJ2_I727ATTKJ2.rar (search in this forum). I used it, all ok.
And, Does anyone know how to reset counter for skyrocket i727? Please help! (I had use an lastest USB JIG - but not working! )
Click to expand...
Click to collapse
Currently, there isn't a way to reset the flash counter.
Excellent Thanks!!!
My flash counter is still at 0. im on stock 2.3.5, but i am rooted.
so what if i wanted to flash to stock.
how could i do this without tripping the counter?
if i follow this tutorial will it trip? or if i use a jig to get into download mode and flash stock will it trip. (not reset counter, just keep it from going to 1 while i flash stock)
also how could i restore the default recovery and get rid of cwm?
When u flash the recovery.tar file cwm will be gone. I m not sure about if it will make ur flash counter 1 or not but i don't think it will make 1.
OFWGKTADGAF said:
My flash counter is still at 0. im on stock 2.3.5, but i am rooted.
so what if i wanted to flash to stock.
how could i do this without tripping the counter?
if i follow this tutorial will it trip? or if i use a jig to get into download mode and flash stock will it trip. (not reset counter, just keep it from going to 1 while i flash stock)
also how could i restore the default recovery and get rid of cwm?
Click to expand...
Click to collapse
OFWGKTADGAF said:
My flash counter is still at 0. im on stock 2.3.5, but i am rooted.
so what if i wanted to flash to stock.
how could i do this without tripping the counter?
if i follow this tutorial will it trip? or if i use a jig to get into download mode and flash stock will it trip. (not reset counter, just keep it from going to 1 while i flash stock)
also how could i restore the default recovery and get rid of cwm?
Click to expand...
Click to collapse
To flash back to stock you need to use Odin. If you use the key combo+USB to get into download mode you'll get the evil yellow warning from at&t, and then after you click the volume up button you'll be in download mode, with text that you're in "Odin Mode" (or something to that effect, unable to check now) according to flash counter, and your count will go up by 1.
When you use a jig, no scary at&t warning, straight to download mode, flash counter says 0, and it's in "Dev Mode".
If using Odin use a jig. There may be other ways around this but the jig seems safest to me...
Sent from my SAMSUNG-SGH-I727 using XDA App
Related
USE AT YOUR OWN RISK! NOT TESTED
http://www.sdx-downloads.com/devs/noobnl/clockworkmod.tar
1.adb reboot download
2. extract odin for epic, open odin3.exe
3. put the clockworkmod.tar as phone
4. start
to get radio back
http://www.sdx-downloads.com/devs/noobnl/modem.d700.tar
1.adb reboot download
2. extract odin for epic, open odin3.exe
3. put the modem.tar as phone
4. start
thanks to all of the tester at #sdx-developers!
i need to install windows again
So have you tested this?
Or did you release this with out any testing to watch others possibly brick their phones?
I say no one flash this until OP gives more info.
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.bin
<ID:0/004> Removed!!
didn't flash at all
we need a proper odin flasher
I used this one to flash the stock rom after a partial brick last night
http://www.sdx-downloads.com/devs/noobnl/Odin3epic.rar
Just to let you guys know odin never flash the first time for me with my captivate. It just hangs and never flashs. After I reboot I get a screen with phone and pc. I use a button combo from there to get to download mode then flash again and it works. Not sure why it never works the first time. Not sure if the epic has the same issue but if it does this could be way its not working.
From this screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Take out your sim card, removable sd card, battery and open Odin3(you must open odin3 before you start or it won't flash. Do NOT put your sim or sd card back in).
Put the battery in.
Plug in USB. (the phone will power on and goto the phone+!+computer screen)
Hold down both Volume buttons, and then push and hold the power button. Hold all three and do NOT let go!
Wait for it to go black and return to the phone+!+computer screen.
When it goes black the 2nd time release the power button and keep holding the volume buttons.
You should now be in download mode, click start on Odin, wait for it to finish and start enjoying your phone again!
This button combo for the captivate!
shep211 said:
This button combo for the captivate!
Click to expand...
Click to collapse
For the Epic 4G to enter Download Mode the Combo is :
with the phone turned off, phold the number 1 key on the QWERTY keyboard and the power button simultaneously
Several members of SDX have also succesfully used this method.
latinmaxima said:
Several members of SDX have also succesfully used this method.
Click to expand...
Click to collapse
To install a custom recovery?
rjmjr69 said:
To install a custom recovery?
Click to expand...
Click to collapse
Yes, I really wanna know this. If this can be done, we ALL know Koush would be proud to support it. A few donations and we could have another addition to the Clockwork Family.
Sent From The Moon...
I've been looking at the 1-click flasher, but have been a bit nervous to do it before a nandroid backup is available. Is the plan right now to wait for Koush and noobnl to finish the clockworkmod recovery except for people who are highly adept at recovering their phones?
gdbassett said:
I've been looking at the 1-click flasher, but have been a bit nervous to do it before a nandroid backup is available. Is the plan right now to wait for Koush and noobnl to finish the clockworkmod recovery except for people who are highly adept at recovering their phones?
Click to expand...
Click to collapse
Thats the only thing thats missing. Recovery and Restore. Cause it can flash .zip files with no problems
So one could flash a theme with this?
rjmjr69 said:
So one could flash a theme with this?
Click to expand...
Click to collapse
Of course.
Fixter said:
Of course.
Click to expand...
Click to collapse
SWEET here we go let the fun start.
ok so still the only way to get into this recovery is by pulling the battery?
Also what do you think would happen with flashing an evo theme?
rjmjr69 said:
SWEET here we go let the fun start.
ok so still the only way to get into this recovery is by pulling the battery?
Also what do you think would happen with flashing an evo theme?
Click to expand...
Click to collapse
Probably crash like hell. And you can get to the Recovery by using the button commands when the phone is off.
Alright I'm totally new to the Samsung Android scene. I've got tons of experience with HTC & Moto devices though, so I'm not a total noob.
What do you mean by get radio back? Do you lose radio if you flash this? I'm so confused by all this.
Yeah, on odin3 when you flash under "phone" you lose radio.
Sent from my SPH-D700 using XDA App
Is there a way for us linux or mac users to flash this without having to install windows or set up a virtual machine?
Sent from my SPH-D700 using XDA App
curious I fairly new to the samsung game with ODIN but why can't we push recovery though ADB or the Terminal like other android phones?
Wanted to install 2.3.6 and Cranium RC4.
Have it done like the instruction from fabsau, after that i got the Bootloop.
Now its not possible to flash any rom.
Have tried 3 PCs with all their USB Ports and 2 Cables.
When Iam in the download mode and want to flash via Odin it stuck like that on every firmware(2.3.4,2.3.6,..).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 5min nothing happens
Who can help
Thank you
olli
try using different usb port..
or enter download mode manually
(volume down+menu+power button instead of rebootdownload.bat)
Unplug USB cable.
Go to download mod again (push Volume down + Home + Power for 10 sec)
Close Odin
start again Odin
and try again.
Don't forget pit file if u cheeked rePartition ;-)
Use Odin 1.7
nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone
Dose Odin 1.7 detect phone ?
Masterolli said:
nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone
Click to expand...
Click to collapse
ermmm..strange...
its happen to me when i'm using rebootdownload.bat..
but its solve with manual download mode..
anybody has another solution??
Masterolli said:
nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone
Click to expand...
Click to collapse
Dont panic as long as you get the tringle yellow sign it can work. do as i mention exactly.
1- remove battery, after 1 min put it back.
2- on your phone and you will see the yellow triangle.
3- open odin 4.43 in your computer and set the files as on pic. you have to flash xxpk4.
4 - connect your phone while it is on with the yellow tringle.
5- odin will map your phone, it will show mapping port in yellow.
6- hit start and wait DONT panic, but wait till it finish.
If you need files you can download from here : http://forum.xda-developers.com/showthread.php?t=1346245
1.ok
2.hav to start manually, when i do nothing it boots to animation and reboot (Bootloop)
2.1 I can enter Download mode like this
Theres no triangle.
I have tried 2.3.6, 2.3.4 rooted like in your pic.
Odin detects my Phone on Comport but still stucks, see first post.
Take out your battery for a while. Rly like 5 min at least. If you have another USB cable, try with that. Also try reinstalling/updating the usb drivers. LINK TO DRIVERSsamsung-mobile-phone-usb-driver-software.updatestar.com/
Masterolli said:
1.ok
2.hav to start manually, when i do nothing it boots to animation and reboot (Bootloop)
2.1 I can enter Download mode like this
Theres no triangle.
I have tried 2.3.6, 2.3.4 rooted like in your pic.
Odin detects my Phone on Comport but still stucks, see first post.
Click to expand...
Click to collapse
good its ok, just flash with xxkp4 like in the pic i show you.
Battery was out for hours, allready have reinstalled usb drivers.
Have tried to flash like on your pic.
Damn it wont flash...
The last two options are build Jig USB Cable (dont know why because i can reach download mode) and when this wont work, I have to bring it back to the shop i have bought :-(
i got some problem howver i manage to overcome tht problem...
1.connect ur USB to your phone & make sure all file being set in Odin for flashing (make sure all file put in destop)
2.put ur phone in manual download mode (press lower volume button+homebutton+on button together)
3.i believe odin can should detect ur phone, then press start.
4.if the odin stuck at same place then off your phone pressing on button (dont remove ur usb cable) & follow step 2 & 3
5.try continue untill it flash.
i've try 4time until i can flashing my phone, hope it can help you too coz ur problem excatly same with mine (cant flash any rom)
hi,
thanks napie fo advice.
Somethimg new happend, when it stucks, i switched it of manually while it was connected, 1 sec before the Phone goes off it starts to flash.
But the problem is, that this happens when the Phone is shuting down, cant stop the procedure.
So it fails.
Its the same with the 2.3.4 firmware!!!
Look at the screenshot...
**** it also shows the same when I unplug while flashing procedure :-((
seem ur usb port got problem...try use another usb port maybe it can be fixed...also please put ur flash file direct in ur destop instead inside other folder name....otherwise use my previous instruction it can be use when ur phone stuck in odin
download file for 2.3.4
http://forum.xda-developers.com/showpost.php?p=17516475&postcount=1
how file to put in odin
http://forum.xda-developers.com/showpost.php?p=17642341&postcount=38
Masterolli said:
hi,
thanks napie fo advice.
Somethimg new happend, when it stucks, i switched it of manually while it was connected, 1 sec before the Phone goes off it starts to flash.
But the problem is, that this happens when the Phone is shuting down, cant stop the procedure.
So it fails.
Its the same with the 2.3.4 firmware!!!
Look at the screenshot...
**** it also shows the same when I unplug while flashing procedure :-((
Click to expand...
Click to collapse
You have to tick one package option then it will work...try it again
mbba67 said:
You have to tick one package option then it will work...try it again
Click to expand...
Click to collapse
But do you explain why XXKP4 didnt install?
@napie I know how to use odin, i have flashed 2.3.4 [email protected] 2.3.6 its not my ability that causes this problems.
I have tried on 3 Computers and 15 different USB ports, its not the USB port.
It makes no difference if the files are direct on the desktop or not, have tried it.
@ mbba67
I know when to select the one pack file, i have flashed several CMW and Kernel.
When its not seleceted it means I will not flash the file. ;-)
I have tried xxxx different combinations.
Maybe i have to accept that its broken :-(
mikeeo019 said:
But do you explain why XXKP4 didnt install?
Click to expand...
Click to collapse
Explaining is not the answer because i think you cant explain why others can flash Cranium RC 4 and others cant since they all doing them same way of flashing
The only way is trying all possiable way untill it comes right....it can be e.g. usb cable, corrupted files, drivers etc......
mbba67 said:
Explaining is not the answer because i think you cant explain why others can flash Cranium RC 4 and others cant since they all doing them same way of flashing
The only way is trying all possiable way untill it comes right....it can be e.g. usb cable, corrupted files, drivers etc......
Click to expand...
Click to collapse
What i meant was that if the problem was that the 'one package' wasn't ticked then it should have worked with xxkp4 as well.
Its now ****ing flashing and it works.
Its the way like napie said with one difference.
(4.if the odin stuck at same place then off your phone pressing on button (dont remove ur usb cable) & follow step 2 & 3)
When it stucks, i switched manually off, then i switched on and the Battery logo appeared.
Now I have pressed the Buttons for download mode there was no Samsung logo.
Strange but works so going on with flashing Cranium RC 4 ^^
Flashed CWM same way, have to go every time this way by flashing wit odin
Thanks to all
Shabbypenguin presents...
Clockworkmod Recovery 6.0.5.0 for Blaze 4G
Sponsored by Shabbypenguin.com. Have you tipped your devs today?
DO NOT CHECK REPARTITION! YOU HAVE BEEN WARNED!
Why the big red warning? Far too many people have broken their devices by not following these instructions! Search the forums, or drop by IRC - you'll see plenty of examples.
So the T-Mobile CWM worked... well sorta you couldnt see anything, so i fixed it up and made sure it worked fine for yall enjoy
Instructions
Download Odin 1.85 - see section below.
Download the Clockworkmod recovery TAR - see section below.
Extract the contents of odin-185.zip.
Run Odin 1.85.exe, and prepare Odin:
Check "auto-reboot", and uncheck all other options.
Click PDA and select the TAR you downloaded.
Put your device into Download Mode:
Connect the USB cable to your PC, but NOT your device.
Remove the battery.
Reinsert the battery.
Hold down Volume Up + Volume Down + Power.
You should now be at Download Mode.
Click Start in Odin.
If you are having issues getting into download mode check out these instructions
That's it! Your device will autoreboot, and your phone should be working properly again.
Downloads
Download Odin 1.85
CWM Touch 6.0.5.0
Credits:
DrTaru: stock device, remote access, lots of testing, screenshots, patience
k0nane: k0nane for being an awesome sauce kind of guy
JFigure/Watcher64: initial testing and pointers/proof of concept
UberPinguin: notes on building kernels for celox, which also apply to this device
SOURCE
If you feel as though my work is worth your money, you can click the link in my signature to donate to me
second'dddddd
P-O-S-T :: R-E-S-E-R-V-E-D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original artwork by Pendulum via Gasolin3.
...for future use.
Follow me on Twitter @k0nane and @publik0!
Okay.
Im having issues.
I have a T-Mobile Samsung Blaze4G
Followed every step to the T.
When I do Vol up+ Vol dwn+ PWR
i come to a recovery screen and at the bottom it says Manual mode.
I dont see anything that says "Download Mode"
From the top down this is what I see
Android Systems recovery <3e>
Reboot system now
apply update from sdcard
wipe data/ factory reset
wipe cache partition
Any ideas?
In Odin I had to download Keis Air because my computer was not installing drivers for the phone. once i downloaded Keis Air and plugged in the phone it recognized it and finished installing the drivers. I did a computer reboot and when I follow the steps I get a YELLOW highlighted box in ODIN under the ID:COM part that says 0:[COM3] in yellow.
I hit start but nothing happens.
Worked awesomely! Just need root now. ;-)
Thanks everyone for all the hard work!
avelasqu said:
Worked awesomely! Just need root now. ;-)
Thanks everyone for all the hard work!
Click to expand...
Click to collapse
I guess you missed this, which was posted at the exact same time.
http://forum.xda-developers.com/showthread.php?t=1591598
k0nane said:
I guess you missed this, which was posted at the exact same time.
http://forum.xda-developers.com/showthread.php?t=1591598
Click to expand...
Click to collapse
Ah shucks. I was able to use the SU files from the t989 and it worked for me.
Is there a difference in what I did and what the root kernel will do?
rooted kernel has a few perks to it that k0nane threw in . hopefully you guys can now attract some devs and start working on roms/cm . we aim to please, just remember us the next time you have a device that isnt getting much love ;P
SCossio from what i understand the key combo gets you into a quasi-downloadmode, need to hit vol up to confirm to enter download mode and then you can plug it in and begin to flash this
perhaps some nice blaze owner can make a how-to video? sorry if our instructions seem off or vague, myself or k0nane have never seen this phone let alone touched one, so we rely on you guys (blaze owners) to help with these kinds of things.
Here is a video on how to successfully enter download mode every time.
shabbypenguin said:
rooted kernel has a few perks to it that k0nane threw in . hopefully you guys can now attract some devs and start working on roms/cm . we aim to please, just remember us the next time you have a device that isnt getting much love ;P
Click to expand...
Click to collapse
This! We're here to help. Feel free to come join us on IRC.
i highly suggest you guys check out https://play.google.com/store/apps/details?id=com.s0up.goomanager to download all your roms etc, just the same as rom manager except you can use any recovery you wnat. same rules still apply... if your devs dont post roms/kernels to goo then they dont show up in teh app
Pre-reqs?
Use odin to install the rooted kernel first, then clockworkmod, correct?
This is my first time rooting. I just wanted to double check that the clockworkmod image didn't contain the rooted kernel already.
Dedridd
It doesn't although for the sake of only incrementing the flash counter once it probably could be consolidated.
However, if you flash CWM its a simple process of flashing the SU binary zip package from the sdcard with CWM, same end result.
I keep getting this message when I try and run odin on my Samsung Galaxy S Blaze 4g I know that I am doing everything right maybe it is my phone
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)
Someone help me plz
Total n00b here.. with a stupid question. (or twenty).
Let's say, if this "Clockworkmod Recovery for Blaze" was installed via Odin and then Rom Manager app flashed with Clockworkmod Recovery for Galaxy S 2, what happens to the previous files (loaded via Odin)? Do both recoveries co-exist? Or does one replace the other? and if so, can this process be repeated again?
I'm just trying to understand this process.
[Update]: I repeated the process described in this thread, figuring that having recovery for some other phone model would not be a good idea, probably not be a well functioning recovery... everything seemed to have worked great but how can I verify that I have the correct version of recovery now? (I apologize for another stupid question in advance).
SCossio said:
Okay.
Im having issues.
I have a T-Mobile Samsung Blaze4G
Followed every step to the T.
When I do Vol up+ Vol dwn+ PWR
i come to a recovery screen and at the bottom it says Manual mode.
I dont see anything that says "Download Mode"
From the top down this is what I see
Android Systems recovery <3e>
Reboot system now
apply update from sdcard
wipe data/ factory reset
wipe cache partition
Any ideas?
In Odin I had to download Keis Air because my computer was not installing drivers for the phone. once i downloaded Keis Air and plugged in the phone it recognized it and finished installing the drivers. I did a computer reboot and when I follow the steps I get a YELLOW highlighted box in ODIN under the ID:COM part that says 0:[COM3] in yellow.
I hit start but nothing happens.
Click to expand...
Click to collapse
Hey there. The phone must be plugged into the computer before you put the battery in.
You guys can also just turn off your phone hold down the volume up+volume down and plug the usb cable into the phone... Make sure the other end is plugged in to the computer first , Odin 100%
Sent from my SGH-T769 using xda premium
Done...now will wait for ROMs. Thank you to all involved in making this happen.
Sent from my SGH-T769 using XDA
De Odexed / Debloated rom should be coming tomorrow. possibly maybe.
Awesome! Can't wait. Thanks for all of the hard work!
Background: Trying to update my stock infuse to Jelly Bean. Looked into what was needed via hours of research. Used SuperOneClick to root phone (Success), installed ESFile Manager to help install mod 3e recovery (success), used ROM Manager to flash CWM (Success).
Upon testing the CWM by booting into recovery, this boot screen issue started.
- I've tried hard resetting, (no success, won't go past the Samsung screen).
- I'm currently using Odin to restore stock firmware, but it's been about 25 minutes so it's probably not working.
- I can only get to Samsung screen and download mode, that's it!
I need my phone and I need to get some sleep. what am I missing? Much appreciated
thanks
here's a shot of Odin right now. It's stuck on "setup connection"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best
dginsd said:
Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best
Click to expand...
Click to collapse
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
Perhaps try to use the Heimdall "back to stock" while in that Emergency mode. The Heimdall program will also tell you if it recognizes a phone attached in download mode, and if it will recognize the phone and flash you back to stock, you can also have it put you back on stock bootloaders which sounds like your problem (though flashing bootloaders is dangerious but in your case may be nessessary). Maybe PM Quickster see if he recommends trying to flash with Heimdall on that mode you've entered, I might also try using an alternate USB cable if you haven't already.
mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium
psal217050 said:
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I have the stock firmware from Samsung. that includes the drivers I presume? the md5 file
holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?
mendozer said:
holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?
Click to expand...
Click to collapse
I haven't seen a Heimdall for JB, or any custom ROM I think because it requires a special PIT file to make. I used this ROM http://forum.xda-developers.com/showthread.php?t=1776129 To flash It though you have to be on the Gingerbread bootloaders, and the instructions for flashing it want you to even flash CM9 ICS, before you flash the final JB ROM. Basically follow the instructions thoroughly or you'll end up in a boot loop ( Not that that's a big deal, now that you have a quick easy way out)
meanhs sal
darn, I'll have to see if JB is really worth it to take the chance again. I also noticed that froyo version from the Heimdall is quirky with some apps. I turn the phone on and several apps just close on me. I get the buzz of death (the one and three) as i like to call it
I'm pretty sure there's Gingerbread version of the Heimdall one click, I'd flash that as almost all the newer Roms are going to require you at least have upgraded to the Gingerbread bootloaders.
Good Morning
I have spent all night trying to determine how to unbrick my brand new Note 5. I was able to use Odin to root the device, but then when I rebooted after trying to install TWRP, it is just plain bricked. I cannot get Odin to install any firmware, i can boot into recovery mode, but wiping data and cache does nothing. I get a constant bootloop that says Kernel is not SEAndroid and Custom Binary blocked by FRP.
Every time i plug the phone into the laptop, it says that the USB device is unrecognizable. I have installed Samsung USB drivers. I am just at a loss, Odin fails every time.
I will admit that I am a pathetic noob and should have waiting a longer time to do this. I had just given up my iPhone on Sunday.
Any help would be appreciated.
Delete the Samsung drivers and then reinstall them, that may get your computer to recognize your device. As far as the rest idk
Trizen said:
Delete the Samsung drivers and then reinstall them, that may get your computer to recognize your device. As far as the rest idk
Click to expand...
Click to collapse
I have done that several times so far. The thing is, the system says not reco. but Odin sees it. I can boot into both download and recovery. So is this considered soft or hard bricked?
molodoko said:
I have done that several times so far. The thing is, the system says not reco. but Odin sees it. I can boot into both download and recovery. So is this considered soft or hard bricked?
Click to expand...
Click to collapse
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.
Brava27 said:
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.
Click to expand...
Click to collapse
I have used Odin 3.09 and 3.10.7. I got my firmware from Sammobile and search by my device model SM-N920T. I have tried this on two different machines, Win8 and Win10. Someone on another thread asked me to try a few different ways to attempt so I will try this:
One "trick" that might work:
Without your phone plugged-in to your PC,
Set up ODIN w/the firmware of choice,boot-up your phone,plug-in to PC,then,boot into download mode while plugged-in.
Try this,or several variations of it.
I had to do this using ODIN on my Note5 to get programs/ROMS to load up.
This isn't common,but,I've seen a few other people have to do this,it's likely a PC-Driver related thing (I have a somewhat uncommon PC,a Gateway,that may explain it)............from Kolio on AndroidForums
molodoko said:
I have used Odin 3.09 and 3.10.7. I got my firmware from Sammobile and search by my device model SM-N920T. I have tried this on two different machines, Win8 and Win10. Someone on another thread asked me to try a few different ways to attempt so I will try this:
One "trick" that might work:
Without your phone plugged-in to your PC,
Set up ODIN w/the firmware of choice,boot-up your phone,plug-in to PC,then,boot into download mode while plugged-in.
Try this,or several variations of it.
I had to do this using ODIN on my Note5 to get programs/ROMS to load up.
This isn't common,but,I've seen a few other people have to do this,it's likely a PC-Driver related thing (I have a somewhat uncommon PC,a Gateway,that may explain it)............from Kolio on AndroidForums
Click to expand...
Click to collapse
If it's bootlooping, you must go into stock recovery and wipe data, factory reset!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Brava27 said:
If it's bootlooping, you must go into stock recovery and wipe data, factory reset! View attachment 3569513
Click to expand...
Click to collapse
I have gone into recovery and wiped data however that does nothing. here are the steps I have done:
Power phone on holding the volume up, home and power buttons - it installs system update
-wipe data/factory reset
I get red line: E: failed to mount /preload (No such file or directory)
then using what was suggested in prior post
When trying to flash with Odin it gets to cm.bin and then fails.
Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Sent from my SM-N920T using Tapatalk
Brava27 said:
Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Yes i have. i grabbed the latest and the one before that. Maybe I should go one further.
I also tried using nobleltetmStockRecovery.tar.md5
I have gotten most success from this though it just hangs after NAND Write Start!!
Click to expand...
Click to collapse
molodoko said:
Brava27 said:
Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Yes i have. i grabbed the latest and the one before that. Maybe I should go one further.
I also tried using nobleltetmStockRecovery.tar.md5
I have gotten most success from this though it just hangs after NAND Write Start!!
Click to expand...
Click to collapse
That method given to me earlier was the key, it was the order in which i plugged it in, turned it on and boom it worked!!
I am not going to do this again until i am much more well versed in the Android world. Thank you to everyone who helped! :laugh::laugh::laugh::good::good::good:
Click to expand...
Click to collapse
molodoko said:
Good Morning
I have spent all night trying to determine how to unbrick my brand new Note 5. I was able to use Odin to root the device, but then when I rebooted after trying to install TWRP, it is just plain bricked. I cannot get Odin to install any firmware, i can boot into recovery mode, but wiping data and cache does nothing. I get a constant bootloop that says Kernel is not SEAndroid and Custom Binary blocked by FRP.
Every time i plug the phone into the laptop, it says that the USB device is unrecognizable. I have installed Samsung USB drivers. I am just at a loss, Odin fails every time.
I will admit that I am a pathetic noob and should have waiting a longer time to do this. I had just given up my iPhone on Sunday.
Any help would be appreciated.
Click to expand...
Click to collapse
It happened to me too i was scared i thought ihad messed my phone up but I found a solution
You can try different usb port and different cable too. And which tab you use for the installing the stock firmware? FRP lock is here because you didnt open the oem unlock before the installing customized file. You have to install stock with odin. and then factory reset and then you can open the device get the development settings and disable the oem unlock.
SM-N920I cihazımdan Tapatalk kullanılarak gönderildi
Brava27 said:
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.
Click to expand...
Click to collapse
Sure you can brick your phone, and the only thing silly about the term brick is the over use of it.