Database Info

Bricked my Skyrocket

I was flashing a new rom last night and it stopped right in the middle of it. Now when I turned it on the only thing I get is the samsung logo. I can't get into recovery mode to install my rom again. Any suggestion anyone?

If you cant get in to cwm than Go to download mode and using odin go back to stock. Reroot again.
Dude research you will find 10 threads about soft brick.
appdroid said:
These will set you back to Stock and Unroot Your phone.​
Welcome Finally You have made it here. Well now I know that you are little worried bout your phone but Let me tell you that there is noting to worry about.
Make sure you are relaxed because if you are tensioned than you will most likely screw things up. Do me a favor and watch this video. Relax get beer or Watch Funny videos on Youtube.
“Never ever unplug your phone when you are Flashing”
Drivers You will need!
! Odin 1.85
!! USB Drivers
!!! Skyrocket Stock Recovery.tar file ATT Or Rogers
Extract the contents of odin-185.zip and the 7zip archive.
Run Odin3+v1.85.exe, and prepare Odin:
Check "auto-reboot", and uncheck all other options.
Install Usb Drivers and Unzip the Recovery file and put it to safe place.
Main Process.
Try to get in Download Mode.
) Connect USB to computer but not your Phone.
))Take out and put back in the battery.
)))Then, hold Vol + and Vol - , now plug in USB and you will at the following screen that’s in picture.
))))Press Volume Up button now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally You have made it to Download mode.
If in case this does not work for you than and you are still luck enough to go into CWM than do factory reset and flash any stock rom. And do all this steps again.
Ok so after getting into Download Mode.
-Go ahead and Go to Odin (Check "auto-reboot", and uncheck all other options).
--In Odin check PDA and find the recovery.tar file that you downloaded.
Now Press Start (Check "auto-reboot", and uncheck all other options.)
When you are done Your screen will look like one below.
It should now reboot to recovery and delete cache and data. Then, it will boot.
Click to expand...
Click to collapse
Rocketing on Sky Ics¡
digitalnrg said:
I was flashing a new rom last night and it stopped right in the middle of it. Now when I turned it on the only thing I get is the samsung logo. I can't get into recovery mode to install my rom again. Any suggestion anyone?
Click to expand...
Click to collapse
Rocketing on Sky Ics¡

digitalnrg said:
I was flashing a new rom last night and it stopped right in the middle of it. Now when I turned it on the only thing I get is the samsung logo. I can't get into recovery mode to install my rom again. Any suggestion anyone?
Click to expand...
Click to collapse
Put it in download mode and flash back to stock with odin
Sent via smoke signal

thanks guys. I was able to flash it back to stock based on above instruction

Instead of making a new thread, figured i would try here first.
Long story short, my skyrocket wont boot into recovery or cmw. I've tried both countless times, and all i can ever get is a quick flash of a battery icon. It still vibrates (gosh i hope thats a good sign of life) and has been plugged into the wall with stock cable/charger for about an hour now.
Basically, flashed the phone via cmw, waited 30+ minutes for it to reboot, it wouldnt, and now i have the problem described above. Battery was at about 40% when i flashed, but was plugged into my computer.
Any help? Maybe i need an external battery charger?
---------- Post added at 04:30 AM ---------- Previous post was at 03:38 AM ----------
GOT IT! took out battery, left it out for 15 mins. got right into cwm.
whew

teeg07 said:
Instead of making a new thread, figured i would try here first.
Long story short, my skyrocket wont boot into recovery or cmw. I've tried both countless times, and all i can ever get is a quick flash of a battery icon. It still vibrates (gosh i hope thats a good sign of life) and has been plugged into the wall with stock cable/charger for about an hour now.
Basically, flashed the phone via cmw, waited 30+ minutes for it to reboot, it wouldnt, and now i have the problem described above. Battery was at about 40% when i flashed, but was plugged into my computer.
Any help? Maybe i need an external battery charger?
---------- Post added at 04:30 AM ---------- Previous post was at 03:38 AM ----------
GOT IT! took out battery, left it out for 15 mins. got right into cwm.
whew
Click to expand...
Click to collapse
can you get the phone into download mode? unplug phone, pull battery and reinsert, press vol up/down at the same time and plug usb into phone, contine holding vol up/down until download mode arrears, basically have you followed the instructions in the post mentioned above?

Yes, I did try that, with no luck.
I actually got it, though. I pulled the battery countless times, did the whole download mode thing, cwm thing, and let it charge for an hour... so on, with no luck.
As an almost last resort, i ended up pulling the battery and leaving it out for 15 minutes after charging it for another hour. Once i reinserted it, i got it go into cwm, mounted my card, downloaded/flashed a new rom and I'm good to go.
Thanks for your help tho!
whew.

Well I screwed up

Okay, so SOMEHOW I downloaded the crespo factory images and flashed the bootloader and then the radio. The system update wouldn't flash and this is when I realized my horrible mistake. So I downloaded the correct factory images. But now, I have no USB access on the thing. Can't fastboot. Can't adb. Phone boots and charges over usb. I can reboot into the bootloader, but my computer doesn't recognize the phone is even attached. I can reboot into recovery (I still have CWM on there) but what can I do from there? Am I TOTALLY ****ed? Please please please help!.....

I think what I need is a CWM flashable bootloader zip file. Or a complete OTA ROM Update zip file that flashes ROM, radio, and bootloader. Since I have CWM I think either of these will work for me, but I can 't find anything like this for the Nexus S 4G. Can anyone help?

have you checked if your computer recognizes your phone on odin mode? if it does you can prob try this
http://forum.xda-developers.com/showthread.php?t=1575502

JOEOZUNA4U said:
have you checked if your computer recognizes your phone on odin mode? if it does you can prob try this
http://forum.xda-developers.com/showthread.php?t=1575502
Click to expand...
Click to collapse
Unfortunately it doesn't. My computer doesn't recognize this phone at all anymore, not in fastboot or download mode, or even just booted into Android. If someone could PLEASE show me where a CWM flashable file that will flash the bootloader is, or make me one, I'd pay some good $$$ for it. Please help?

You flashed the bootloader & radio with ODIN?

supercluver said:
Unfortunately it doesn't. My computer doesn't recognize this phone at all anymore, not in fastboot or download mode, or even just booted into Android. If someone could PLEASE show me where a CWM flashable file that will flash the bootloader is, or make me one, I'd pay some good $$$ for it. Please help?
Click to expand...
Click to collapse
Give me a sec I will try to make a flashable CWM with just the bootloader. No need for donations

polobunny said:
You flashed the bootloader & radio with ODIN?
Click to expand...
Click to collapse
I flashed the CRESPO bootloader and radio via fastboot. Then when I tried to flash the ROM update via fastboot it gave me an error. This is when I noticed I was using the CRESPO files instead of the CRESPO 4G files.... Now, after rebooting, my computer WILL NOT recognize the phone at all via usb, in any way, fastboot, ODIN, nothing. But otherwise the phone seems fine. It charges over USB. It boots and I can get into recovery (and I still have CWM) so if I could download a file over wifi (which I can, already tried) and then flash said file via CWM that would flash the new bootloader, I'd be good to go.

rasengan82 said:
Give me a sec I will try to make a flashable CWM with just the bootloader. No need for donations
Click to expand...
Click to collapse
Dude THANK YOU.

I don't think that's possible though, to make a CWM flashable bootloader. :|

Here ya go man. Hope this helps.
https://www.dropbox.com/s/0yemj2aybmdda4f/crespo4g_bootloader_rasengan82.zip

polobunny said:
I don't think that's possible though, to make a CWM flashable bootloader. :|
Click to expand...
Click to collapse
I'm pretty sure it is, as a complete OTA zip will flash the radio, bootload, and ROM, at least I think it will....

rasengan82 said:
Here ya go man. Hope this helps.
https://www.dropbox.com/s/0yemj2aybmdda4f/crespo4g_bootloader_rasengan82.zip
Click to expand...
Click to collapse
Here. Just in case you missed from previous page.

rasengan82 said:
Here. Just in case you missed from previous page.
Click to expand...
Click to collapse
THANK YOU! Worked perfectly. Flashed, rebooted to bootloader, and computer recognized the device again. You are a life saver! You sure no donations are necessary???

supercluver said:
THANK YOU! Worked perfectly. Flashed, rebooted to bootloader, and computer recognized the device again. You are a life saver! You sure no donations are necessary???
Click to expand...
Click to collapse
Nah it's alright man. Glad it worked!

NVM RAS is da man!
Can you put the phone into download mode?
1. Unplug USB and pull the battery. then replace the battery.
2. with the volume up and vol down buttons held down. Press and release the power button for about a sec.
If you get the same as the picture below follow the procedure found here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i flashed a CM nightly build.. which is out nof the norm for me kuz i usually stick with #euroskank and i lost all USB capabilities too. everything else works perfectly, charges fine and all..
i flashed the above zip and it gives me temp access via USB but if my phone goes to sleep or if i reboot im back to square 1 and have to re flash... dunno wtf i did but damn this sucks

kalico17 said:
i flashed a CM nightly build.. which is out nof the norm for me kuz i usually stick with #euroskank and i lost all USB capabilities too. everything else works perfectly, charges fine and all..
i flashed the above zip and it gives me temp access via USB but if my phone goes to sleep or if i reboot im back to square 1 and have to re flash... dunno wtf i did but damn this sucks
Click to expand...
Click to collapse
Did you ever get this resolved? I did something VERY similar when I first started modding on this phone, and experienced VERY similar issues. I have an AWESOME fix, even though it leaves the download screen looking like the oem unlock screen if you put oem lock back on (otherwise it looks normal, and who the heck would do that is beyond me - I only found it when I originally took it back to COMPLETE stock), but it functions fine, and this will take you back to gb, but it seems like the 'fixall' for this phone, and you can always reroot, reflash cwm via fastboot, etc, after using it.
Let me know.
Peace..
~WickiD~

DONT POST IN THE DEVELOPMENT THREAD UNLESS YOU'RE RELEASING A ROM KERNEL OR RECOVERYY!!!
this needs to be moved to Q&A or General...
BIGGEST PET PEEVE!!!!!!!!!

[Q] Infuse stuck on boot screen

Background: Trying to update my stock infuse to Jelly Bean. Looked into what was needed via hours of research. Used SuperOneClick to root phone (Success), installed ESFile Manager to help install mod 3e recovery (success), used ROM Manager to flash CWM (Success).
Upon testing the CWM by booting into recovery, this boot screen issue started.
- I've tried hard resetting, (no success, won't go past the Samsung screen).
- I'm currently using Odin to restore stock firmware, but it's been about 25 minutes so it's probably not working.
- I can only get to Samsung screen and download mode, that's it!
I need my phone and I need to get some sleep. what am I missing? Much appreciated
thanks

here's a shot of Odin right now. It's stuck on "setup connection"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best

dginsd said:
Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best
Click to expand...
Click to collapse
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed

mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
Perhaps try to use the Heimdall "back to stock" while in that Emergency mode. The Heimdall program will also tell you if it recognizes a phone attached in download mode, and if it will recognize the phone and flash you back to stock, you can also have it put you back on stock bootloaders which sounds like your problem (though flashing bootloaders is dangerious but in your case may be nessessary). Maybe PM Quickster see if he recommends trying to flash with Heimdall on that mode you've entered, I might also try using an alternate USB cable if you haven't already.

mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium

psal217050 said:
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I have the stock firmware from Samsung. that includes the drivers I presume? the md5 file

holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?

mendozer said:
holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?
Click to expand...
Click to collapse
I haven't seen a Heimdall for JB, or any custom ROM I think because it requires a special PIT file to make. I used this ROM http://forum.xda-developers.com/showthread.php?t=1776129 To flash It though you have to be on the Gingerbread bootloaders, and the instructions for flashing it want you to even flash CM9 ICS, before you flash the final JB ROM. Basically follow the instructions thoroughly or you'll end up in a boot loop ( Not that that's a big deal, now that you have a quick easy way out)

meanhs sal
darn, I'll have to see if JB is really worth it to take the chance again. I also noticed that froyo version from the Heimdall is quirky with some apps. I turn the phone on and several apps just close on me. I get the buzz of death (the one and three) as i like to call it

I'm pretty sure there's Gingerbread version of the Heimdall one click, I'd flash that as almost all the newer Roms are going to require you at least have upgraded to the Gingerbread bootloaders.

Note 5 bricked

Good Morning
I have spent all night trying to determine how to unbrick my brand new Note 5. I was able to use Odin to root the device, but then when I rebooted after trying to install TWRP, it is just plain bricked. I cannot get Odin to install any firmware, i can boot into recovery mode, but wiping data and cache does nothing. I get a constant bootloop that says Kernel is not SEAndroid and Custom Binary blocked by FRP.
Every time i plug the phone into the laptop, it says that the USB device is unrecognizable. I have installed Samsung USB drivers. I am just at a loss, Odin fails every time.
I will admit that I am a pathetic noob and should have waiting a longer time to do this. I had just given up my iPhone on Sunday.
Any help would be appreciated.

Delete the Samsung drivers and then reinstall them, that may get your computer to recognize your device. As far as the rest idk

Trizen said:
Delete the Samsung drivers and then reinstall them, that may get your computer to recognize your device. As far as the rest idk
Click to expand...
Click to collapse
I have done that several times so far. The thing is, the system says not reco. but Odin sees it. I can boot into both download and recovery. So is this considered soft or hard bricked?

molodoko said:
I have done that several times so far. The thing is, the system says not reco. but Odin sees it. I can boot into both download and recovery. So is this considered soft or hard bricked?
Click to expand...
Click to collapse
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.

Brava27 said:
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.
Click to expand...
Click to collapse
I have used Odin 3.09 and 3.10.7. I got my firmware from Sammobile and search by my device model SM-N920T. I have tried this on two different machines, Win8 and Win10. Someone on another thread asked me to try a few different ways to attempt so I will try this:
One "trick" that might work:
Without your phone plugged-in to your PC,
Set up ODIN w/the firmware of choice,boot-up your phone,plug-in to PC,then,boot into download mode while plugged-in.
Try this,or several variations of it.
I had to do this using ODIN on my Note5 to get programs/ROMS to load up.
This isn't common,but,I've seen a few other people have to do this,it's likely a PC-Driver related thing (I have a somewhat uncommon PC,a Gateway,that may explain it)............from Kolio on AndroidForums

molodoko said:
I have used Odin 3.09 and 3.10.7. I got my firmware from Sammobile and search by my device model SM-N920T. I have tried this on two different machines, Win8 and Win10. Someone on another thread asked me to try a few different ways to attempt so I will try this:
One "trick" that might work:
Without your phone plugged-in to your PC,
Set up ODIN w/the firmware of choice,boot-up your phone,plug-in to PC,then,boot into download mode while plugged-in.
Try this,or several variations of it.
I had to do this using ODIN on my Note5 to get programs/ROMS to load up.
This isn't common,but,I've seen a few other people have to do this,it's likely a PC-Driver related thing (I have a somewhat uncommon PC,a Gateway,that may explain it)............from Kolio on AndroidForums
Click to expand...
Click to collapse
If it's bootlooping, you must go into stock recovery and wipe data, factory reset!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Brava27 said:
If it's bootlooping, you must go into stock recovery and wipe data, factory reset! View attachment 3569513
Click to expand...
Click to collapse
I have gone into recovery and wiped data however that does nothing. here are the steps I have done:
Power phone on holding the volume up, home and power buttons - it installs system update
-wipe data/factory reset
I get red line: E: failed to mount /preload (No such file or directory)
then using what was suggested in prior post
When trying to flash with Odin it gets to cm.bin and then fails.

Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Sent from my SM-N920T using Tapatalk

Brava27 said:
Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Yes i have. i grabbed the latest and the one before that. Maybe I should go one further.
I also tried using nobleltetmStockRecovery.tar.md5
I have gotten most success from this though it just hangs after NAND Write Start!!
Click to expand...
Click to collapse

molodoko said:
Brava27 said:
Have you tried re-downloading the firmware from sammobile.com? Try a different build number?
Yes i have. i grabbed the latest and the one before that. Maybe I should go one further.
I also tried using nobleltetmStockRecovery.tar.md5
I have gotten most success from this though it just hangs after NAND Write Start!!
Click to expand...
Click to collapse
That method given to me earlier was the key, it was the order in which i plugged it in, turned it on and boom it worked!!
I am not going to do this again until i am much more well versed in the Android world. Thank you to everyone who helped! :laugh::laugh::laugh::good::good::good:
Click to expand...
Click to collapse

molodoko said:
Good Morning
I have spent all night trying to determine how to unbrick my brand new Note 5. I was able to use Odin to root the device, but then when I rebooted after trying to install TWRP, it is just plain bricked. I cannot get Odin to install any firmware, i can boot into recovery mode, but wiping data and cache does nothing. I get a constant bootloop that says Kernel is not SEAndroid and Custom Binary blocked by FRP.
Every time i plug the phone into the laptop, it says that the USB device is unrecognizable. I have installed Samsung USB drivers. I am just at a loss, Odin fails every time.
I will admit that I am a pathetic noob and should have waiting a longer time to do this. I had just given up my iPhone on Sunday.
Any help would be appreciated.
Click to expand...
Click to collapse
It happened to me too i was scared i thought ihad messed my phone up but I found a solution

You can try different usb port and different cable too. And which tab you use for the installing the stock firmware? FRP lock is here because you didnt open the oem unlock before the installing customized file. You have to install stock with odin. and then factory reset and then you can open the device get the development settings and disable the oem unlock.
SM-N920I cihazımdan Tapatalk kullanılarak gönderildi

Brava27 said:
You can't brick your phone. That terminology is silly.
What Odin are you using? You have to use 10.0.7.1 something like that.
Also make sure you are flashing your device model firmware.
Try another computer if Odin fails on your current computer.
Click to expand...
Click to collapse
Sure you can brick your phone, and the only thing silly about the term brick is the over use of it.

j3 2017 dont boot after flash

hi i flashed j3 2017 with odin.the final result was passed but the phone dont boot.it goes only to odin download mode. any solution

ntamvakeras said:
hi i flashed j3 2017 with odin.the final result was passed but the phone dont boot.it goes only to odin download mode. any solution
Click to expand...
Click to collapse
Well, I'm no expert on booting, but I would try this. First, pull the battery to shut off the phone. Second, reinstall the battery and Press and hold "Volume Up+Home+Power" buttons at the same time till your phone is on,then your Samsung will enter Recovery Mode. It takes a while to get to the recovery screen so be patient. You may see the dead android for a while, but after a few minutes you will get the recovery menu. From there you can try reboot system and see if it will boot for you.
Good Luck!

BigZ1 said:
Well, I'm no expert on booting, but I would try this. First, pull the battery to shut off the phone. Second, reinstall the battery and Press and hold "Volume Up+Home+Power" buttons at the same time till your phone is on,then your Samsung will enter Recovery Mode. It takes a while to get to the recovery screen so be patient. You may see the dead android for a while, but after a few minutes you will get the recovery menu. From there you can try reboot system and see if it will boot for you.
Good Luck!
Click to expand...
Click to collapse
Forgot to ask you a question. I have a J3 that I'm trying to unlock the boot loader. If you get yours working, would you mind checking your developer options to see if you have the button for OEM unlocking? I would appreciate it. Thanks

BigZ1 said:
Forgot to ask you a question. I have a J3 that I'm trying to unlock the boot loader. If you get yours working, would you mind checking your developer options to see if you have the button for OEM unlocking? I would appreciate it. Thanks
Click to expand...
Click to collapse
I did that but nothing is happening. Only volume down home end power combination works

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did you hold the keys down continuously? That is to say, until you either get recovery mode (or in your case bootloader mode)? If you let go of the key combo after seeing the Samsung J3 screen, you let go too soon. I've always had success with getting into recovery that way. Try it again.
If you truly can't start up in recovery mode, I think you may have wiped out your recovery partition. I'd suggest you use Odin to flash it again.

I just tried booting into recovery mode and then reboot to system. If you can get to that point, you are home free. If you can't get to recovery mode, I think your best bet is to try to reflash with Odin. Maybe you got a bad download. Consider getting a fresh download and reflashing with Odin.

One more thing you might be able to do. IF you had usb debugging enabled, you could connect the phone to your pc, and issue a fastboot command "fastboot reboot" which would reboot you into the system.
This reqires some level of technical skill and some setup work to get fastboot installed (on windows) or if you have a Linux computer, fastboot is probably already installed.
The above is only going to work if you had the developers option for usb debugging turned on before you flashed the phone, and even then it may or may not work, depending on how far the phone gets while booting.
I think at this point, your best option is downloading a fresh copy of your system image from Samsung, and reflashing it with Odin. Hoperfully it will still connect to Odin, since it's already in bootloader mode.

This phone was fully functional but had broken screen as you see. I left it and I ordered a new from aliexpress. After one month the new screen came. I took the phone for charging but it gave a signal that battery not charged. And the phone not opened. I placed a new battery for charging but still couldn't get to menu and I did a wipe data factory reset but nothing happened so I decided to flash it with odin but while the flash is OK the phone don't boot. When I try to charge it is gives a green screen

ntamvakeras said:
This phone was fully functional but had broken screen as you see. I left it and I ordered a new from aliexpress. After one month the new screen came. I took the phone for charging but it gave a signal that battery not charged. And the phone not opened. I placed a new battery for charging but still couldn't get to menu and I did a wipe data factory reset but nothing happened so I decided to flash it with odin but while the flash is OK the phone don't boot. When I try to charge it is gives a green scree
Click to expand...
Click to collapse

After you flashed it, and rebooted the phone, how long did you wait for the phone to boot into system? It takes a long time (like maybe 15 minutes) for it to get to the point where you do the initial configuration. If you can try flashing with Odin again, give it at least 15 minutes to get through it's initialization process. That might be what went wrong. Just a guess on my part, but that's what I think. Let me know if it works.

VID_20220727_202947.mp4
drive.google.com

ntamvakeras said:
VID_20220727_202947.mp4
drive.google.com
Click to expand...
Click to collapse
I did all this but nothing happens I don't see the Samsung logo only a green screen. I upload a video to see what I doing

I wish I could help you. I think you are doing everything right. This problem exceeds my knowledge. Maybe someone else smarter can help you.

OK thanks a lot for your assistance

ntamvakeras said:
OK thanks a lot for your assistance
Click to expand...
Click to collapse
I don't know if you are still trying to fix your phone. If so, you might try experimenting with the ODIN option for reboot after flash. Try turning it off, flash with ODIN, unplug cable, pull battery and re-insert, see if it will boot (be patient, it will be slow). If that doesnt work, pull and reinsert battery, then try to boot into recovery with keys.
Just an idea... might get lucky.

BigZ1 said:
I don't know if you are still trying to fix your phone. If so, you might try experimenting with the ODIN option for reboot after flash. Try turning it off, flash with ODIN, unplug cable, pull battery and re-insert, see if it will boot (be patient, it will be slow). If that doesnt work, pull and reinsert battery, then try to boot into recovery with keys.
Just an idea... might get lucky.
Click to expand...
Click to collapse
I did it but nothing happened. The matter is that the phone don't power on after flash. I don't know what else to do

Hello ntamvakeras, on the first video I tell you that in option you manipulate in pit. I have an old j3 2017 I managed to install official Firmware and then install TRWP, the J3 cable is the good one I didn't have the good is we change it worked.
When you use in option pit these why you do this, I flash I don't touch pit.

ntamvakeras said:
View attachment 5669359
Click to expand...
Click to collapse
Will never boot FRP lock and OEm are On i think a account is hanging to the phone , boot in recovery samsung mode and wipe data factory reset from there , reboot

meric57 said:
Hello ntamvakeras, on the first video I tell you that in option you manipulate in pit. I have an old j3 2017 I managed to install official Firmware and then install TRWP, the J3 cable is the good one I didn't have the good is we change it worked.
When you use in option pit these why you do this, I flash I don't touch pit.
Click to expand...
Click to collapse
HI I did that because I have done a lot of experiments in this phone. I know that is wrong but I did that as last way to recover the phone