Database Info

Stuck on Odin??? HELP

Wanted to install 2.3.6 and Cranium RC4.
Have it done like the instruction from fabsau, after that i got the Bootloop.
Now its not possible to flash any rom.
Have tried 3 PCs with all their USB Ports and 2 Cables.
When Iam in the download mode and want to flash via Odin it stuck like that on every firmware(2.3.4,2.3.6,..).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 5min nothing happens
Who can help
Thank you
olli

try using different usb port..
or enter download mode manually
(volume down+menu+power button instead of rebootdownload.bat)

Unplug USB cable.
Go to download mod again (push Volume down + Home + Power for 10 sec)
Close Odin
start again Odin
and try again.
Don't forget pit file if u cheeked rePartition ;-)
Use Odin 1.7

nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone

Dose Odin 1.7 detect phone ?

Masterolli said:
nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone
Click to expand...
Click to collapse
ermmm..strange...
its happen to me when i'm using rebootdownload.bat..
but its solve with manual download mode..
anybody has another solution??

Masterolli said:
nothing worked, I allready go manually in DL Mod, nothing else is possible.
Odin 1.70 wont flash, shows failure 1
WTF whats up with my Phone
Click to expand...
Click to collapse
Dont panic as long as you get the tringle yellow sign it can work. do as i mention exactly.
1- remove battery, after 1 min put it back.
2- on your phone and you will see the yellow triangle.
3- open odin 4.43 in your computer and set the files as on pic. you have to flash xxpk4.
4 - connect your phone while it is on with the yellow tringle.
5- odin will map your phone, it will show mapping port in yellow.
6- hit start and wait DONT panic, but wait till it finish.
If you need files you can download from here : http://forum.xda-developers.com/showthread.php?t=1346245

1.ok
2.hav to start manually, when i do nothing it boots to animation and reboot (Bootloop)
2.1 I can enter Download mode like this
Theres no triangle.
I have tried 2.3.6, 2.3.4 rooted like in your pic.
Odin detects my Phone on Comport but still stucks, see first post.

Take out your battery for a while. Rly like 5 min at least. If you have another USB cable, try with that. Also try reinstalling/updating the usb drivers. LINK TO DRIVERSsamsung-mobile-phone-usb-driver-software.updatestar.com/

Masterolli said:
1.ok
2.hav to start manually, when i do nothing it boots to animation and reboot (Bootloop)
2.1 I can enter Download mode like this
Theres no triangle.
I have tried 2.3.6, 2.3.4 rooted like in your pic.
Odin detects my Phone on Comport but still stucks, see first post.
Click to expand...
Click to collapse
good its ok, just flash with xxkp4 like in the pic i show you.

Battery was out for hours, allready have reinstalled usb drivers.
Have tried to flash like on your pic.
Damn it wont flash...
The last two options are build Jig USB Cable (dont know why because i can reach download mode) and when this wont work, I have to bring it back to the shop i have bought :-(

i got some problem howver i manage to overcome tht problem...
1.connect ur USB to your phone & make sure all file being set in Odin for flashing (make sure all file put in destop)
2.put ur phone in manual download mode (press lower volume button+homebutton+on button together)
3.i believe odin can should detect ur phone, then press start.
4.if the odin stuck at same place then off your phone pressing on button (dont remove ur usb cable) & follow step 2 & 3
5.try continue untill it flash.
i've try 4time until i can flashing my phone, hope it can help you too coz ur problem excatly same with mine (cant flash any rom)

hi,
thanks napie fo advice.
Somethimg new happend, when it stucks, i switched it of manually while it was connected, 1 sec before the Phone goes off it starts to flash.
But the problem is, that this happens when the Phone is shuting down, cant stop the procedure.
So it fails.
Its the same with the 2.3.4 firmware!!!
Look at the screenshot...
**** it also shows the same when I unplug while flashing procedure :-((

seem ur usb port got problem...try use another usb port maybe it can be fixed...also please put ur flash file direct in ur destop instead inside other folder name....otherwise use my previous instruction it can be use when ur phone stuck in odin
download file for 2.3.4
http://forum.xda-developers.com/showpost.php?p=17516475&postcount=1
how file to put in odin
http://forum.xda-developers.com/showpost.php?p=17642341&postcount=38

Masterolli said:
hi,
thanks napie fo advice.
Somethimg new happend, when it stucks, i switched it of manually while it was connected, 1 sec before the Phone goes off it starts to flash.
But the problem is, that this happens when the Phone is shuting down, cant stop the procedure.
So it fails.
Its the same with the 2.3.4 firmware!!!
Look at the screenshot...
**** it also shows the same when I unplug while flashing procedure :-((
Click to expand...
Click to collapse
You have to tick one package option then it will work...try it again

mbba67 said:
You have to tick one package option then it will work...try it again
Click to expand...
Click to collapse
But do you explain why XXKP4 didnt install?

@napie I know how to use odin, i have flashed 2.3.4 [email protected] 2.3.6 its not my ability that causes this problems.
I have tried on 3 Computers and 15 different USB ports, its not the USB port.
It makes no difference if the files are direct on the desktop or not, have tried it.
@ mbba67
I know when to select the one pack file, i have flashed several CMW and Kernel.
When its not seleceted it means I will not flash the file. ;-)
I have tried xxxx different combinations.
Maybe i have to accept that its broken :-(

mikeeo019 said:
But do you explain why XXKP4 didnt install?
Click to expand...
Click to collapse
Explaining is not the answer because i think you cant explain why others can flash Cranium RC 4 and others cant since they all doing them same way of flashing
The only way is trying all possiable way untill it comes right....it can be e.g. usb cable, corrupted files, drivers etc......

mbba67 said:
Explaining is not the answer because i think you cant explain why others can flash Cranium RC 4 and others cant since they all doing them same way of flashing
The only way is trying all possiable way untill it comes right....it can be e.g. usb cable, corrupted files, drivers etc......
Click to expand...
Click to collapse
What i meant was that if the problem was that the 'one package' wasn't ticked then it should have worked with xxkp4 as well.

Its now ****ing flashing and it works.
Its the way like napie said with one difference.
(4.if the odin stuck at same place then off your phone pressing on button (dont remove ur usb cable) & follow step 2 & 3)
When it stucks, i switched manually off, then i switched on and the Battery logo appeared.
Now I have pressed the Buttons for download mode there was no Samsung logo.
Strange but works so going on with flashing Cranium RC 4 ^^
Flashed CWM same way, have to go every time this way by flashing wit odin
Thanks to all

Who can help me,when i flashed 2.3.5ATT,CDT.bin FAIL

Who can help me,I OTA 2.3.6 rom，but no root，so I want to reflash 2.3.5.But when i flashed 2.3.5ATT,the CDT.bin was fail...
thanks for help!

Please read the forum before posting!
http://forum.xda-developers.com/showthread.php?p=22116461
Sent from my MB865 using Tapatalk

cogeary said:
Please read the forum before posting!
http://forum.xda-developers.com/showthread.php?p=22116461
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
thank you! i will be careful from now.haha

Ok I am having RSD Lite fail during my flashing back to 2.3.5. I did the update and my root failed so I want to start over. I have downloaded fxz and I have replaced the 4 files that needed replaced. I have the correct drivers and I have restarted my computer after installing and downloading everything. I have followed the steps to flashing back to a T. I have searched and I have read everything. I turn the phone off and put it into ap fastboot and connect the phone to my pc and run the rsd. During the flashing process it keeps failing at different steps and stops. Now the phone boots into fastboot only. Any thoughts?

tmease1 said:
Ok I am having RSD Lite fail during my flashing back to 2.3.5. I did the update and my root failed so I want to start over. I have downloaded fxz and I have replaced the 4 files that needed replaced. I have the correct drivers and I have restarted my computer after installing and downloading everything. I have followed the steps to flashing back to a T. I have searched and I have read everything. I turn the phone off and put it into ap fastboot and connect the phone to my pc and run the rsd. During the flashing process it keeps failing at different steps and stops. Now the phone boots into fastboot only. Any thoughts?
Click to expand...
Click to collapse
when you power on do the volume up/down and select normal boot.
see if it will boot.
i had to do this until i got it to reflash.

Yes, It will boot. It boots back to 2.3.6. I have tried different things to get rsd to work and it fails on different steps. I just tried again and it automatically failed as soon as i hit the start button. Then I hit start again and it says 1/18 flash mbm "allow mbmloader-flashing-mbm.bin. Is that correct. and its taking awhile on that step

tmease1 said:
Yes, It will boot. It boots back to 2.3.6. I have tried different things to get rsd to work and it fails on different steps.
Click to expand...
Click to collapse
What steps has it failed at?
Are you sure that your Atrix 2 is completely connected to your computer while flashing? What you should do is put your device into fastboot mode and keep connecting it to your computer until it says "Transfer Mode: USB Connected" at the bottom of your phone. Then DO NOT TOUCH YOUR PHONE until RSD Lite is completely finished. Some non-OEM usb cables don't play nice with the Atrix 2.

Everything is looking good on the phone and rsd. It was wierd rsd failing and then i soon as i hit the start button again it taking off. It is still in step 1 and its says its in process so Ill let it be for a minute and see what happens.
---------- Post added at 10:58 PM ---------- Previous post was at 10:43 PM ----------
I noticed on rsd, it is not showing my device on device properties. That is more than likely my problem? any suggestions on that?

tmease1 said:
Everything is looking good on the phone and rsd. It was wierd rsd failing and then i soon as i hit the start button again it taking off. It is still in step 1 and its says its in process so Ill let it be for a minute and see what happens.
---------- Post added at 10:58 PM ---------- Previous post was at 10:43 PM ----------
I noticed on rsd, it is not showing my device on device properties. That is more than likely my problem? any suggestions on that?
Click to expand...
Click to collapse
I can't exactly remember but off the top of my head but I think it's supposed to do that...

I finally got it to work. I had to use another computer. RSD must not like widows vista just like everyone else. It gets frustrating when you know you are taking the right steps and its the hardware. Thanks for the help

tmease1 said:
I finally got it to work. I had to use another computer. RSD must not like widows vista just like everyone else. It gets frustrating when you know you are taking the right steps and its the hardware. Thanks for the help
Click to expand...
Click to collapse
Good to hear you got it worked out.

[RESOLVED] Fail to boot 1/18... ect
zwz1984 said:
Who can help me,I OTA 2.3.6 rom，but no root，so I want to reflash 2.3.5.But when i flashed 2.3.5ATT,the CDT.bin was fail...
thanks for help!
Click to expand...
Click to collapse
Hi there, I had the same problem too, but I didn't realize that I had problem with my USB data cable, and that my phone needs to be fully charged and that it charges at least at 1.0 amp or higher. My phone is an Motorola RZR XT910. It does not matters now what kind of phone I'm using, what really matters is that your phone needs it original USB wire or one that will not be lose into the phone's USB port, and have it fully charged. Make sure your computer is charging your phone or any other phone at the specific AMP, otherwise your phone will die out of charge and you will keep receiving the same error when flashing a ROOM using RSD Lite.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Well I screwed up

Okay, so SOMEHOW I downloaded the crespo factory images and flashed the bootloader and then the radio. The system update wouldn't flash and this is when I realized my horrible mistake. So I downloaded the correct factory images. But now, I have no USB access on the thing. Can't fastboot. Can't adb. Phone boots and charges over usb. I can reboot into the bootloader, but my computer doesn't recognize the phone is even attached. I can reboot into recovery (I still have CWM on there) but what can I do from there? Am I TOTALLY ****ed? Please please please help!.....

I think what I need is a CWM flashable bootloader zip file. Or a complete OTA ROM Update zip file that flashes ROM, radio, and bootloader. Since I have CWM I think either of these will work for me, but I can 't find anything like this for the Nexus S 4G. Can anyone help?

have you checked if your computer recognizes your phone on odin mode? if it does you can prob try this
http://forum.xda-developers.com/showthread.php?t=1575502

JOEOZUNA4U said:
have you checked if your computer recognizes your phone on odin mode? if it does you can prob try this
http://forum.xda-developers.com/showthread.php?t=1575502
Click to expand...
Click to collapse
Unfortunately it doesn't. My computer doesn't recognize this phone at all anymore, not in fastboot or download mode, or even just booted into Android. If someone could PLEASE show me where a CWM flashable file that will flash the bootloader is, or make me one, I'd pay some good $$$ for it. Please help?

You flashed the bootloader & radio with ODIN?

supercluver said:
Unfortunately it doesn't. My computer doesn't recognize this phone at all anymore, not in fastboot or download mode, or even just booted into Android. If someone could PLEASE show me where a CWM flashable file that will flash the bootloader is, or make me one, I'd pay some good $$$ for it. Please help?
Click to expand...
Click to collapse
Give me a sec I will try to make a flashable CWM with just the bootloader. No need for donations

polobunny said:
You flashed the bootloader & radio with ODIN?
Click to expand...
Click to collapse
I flashed the CRESPO bootloader and radio via fastboot. Then when I tried to flash the ROM update via fastboot it gave me an error. This is when I noticed I was using the CRESPO files instead of the CRESPO 4G files.... Now, after rebooting, my computer WILL NOT recognize the phone at all via usb, in any way, fastboot, ODIN, nothing. But otherwise the phone seems fine. It charges over USB. It boots and I can get into recovery (and I still have CWM) so if I could download a file over wifi (which I can, already tried) and then flash said file via CWM that would flash the new bootloader, I'd be good to go.

rasengan82 said:
Give me a sec I will try to make a flashable CWM with just the bootloader. No need for donations
Click to expand...
Click to collapse
Dude THANK YOU.

I don't think that's possible though, to make a CWM flashable bootloader. :|

Here ya go man. Hope this helps.
https://www.dropbox.com/s/0yemj2aybmdda4f/crespo4g_bootloader_rasengan82.zip

polobunny said:
I don't think that's possible though, to make a CWM flashable bootloader. :|
Click to expand...
Click to collapse
I'm pretty sure it is, as a complete OTA zip will flash the radio, bootload, and ROM, at least I think it will....

rasengan82 said:
Here ya go man. Hope this helps.
https://www.dropbox.com/s/0yemj2aybmdda4f/crespo4g_bootloader_rasengan82.zip
Click to expand...
Click to collapse
Here. Just in case you missed from previous page.

rasengan82 said:
Here. Just in case you missed from previous page.
Click to expand...
Click to collapse
THANK YOU! Worked perfectly. Flashed, rebooted to bootloader, and computer recognized the device again. You are a life saver! You sure no donations are necessary???

supercluver said:
THANK YOU! Worked perfectly. Flashed, rebooted to bootloader, and computer recognized the device again. You are a life saver! You sure no donations are necessary???
Click to expand...
Click to collapse
Nah it's alright man. Glad it worked!

NVM RAS is da man!
Can you put the phone into download mode?
1. Unplug USB and pull the battery. then replace the battery.
2. with the volume up and vol down buttons held down. Press and release the power button for about a sec.
If you get the same as the picture below follow the procedure found here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i flashed a CM nightly build.. which is out nof the norm for me kuz i usually stick with #euroskank and i lost all USB capabilities too. everything else works perfectly, charges fine and all..
i flashed the above zip and it gives me temp access via USB but if my phone goes to sleep or if i reboot im back to square 1 and have to re flash... dunno wtf i did but damn this sucks

kalico17 said:
i flashed a CM nightly build.. which is out nof the norm for me kuz i usually stick with #euroskank and i lost all USB capabilities too. everything else works perfectly, charges fine and all..
i flashed the above zip and it gives me temp access via USB but if my phone goes to sleep or if i reboot im back to square 1 and have to re flash... dunno wtf i did but damn this sucks
Click to expand...
Click to collapse
Did you ever get this resolved? I did something VERY similar when I first started modding on this phone, and experienced VERY similar issues. I have an AWESOME fix, even though it leaves the download screen looking like the oem unlock screen if you put oem lock back on (otherwise it looks normal, and who the heck would do that is beyond me - I only found it when I originally took it back to COMPLETE stock), but it functions fine, and this will take you back to gb, but it seems like the 'fixall' for this phone, and you can always reroot, reflash cwm via fastboot, etc, after using it.
Let me know.
Peace..
~WickiD~

DONT POST IN THE DEVELOPMENT THREAD UNLESS YOU'RE RELEASING A ROM KERNEL OR RECOVERYY!!!
this needs to be moved to Q&A or General...
BIGGEST PET PEEVE!!!!!!!!!

[Q] Infuse stuck on boot screen

Background: Trying to update my stock infuse to Jelly Bean. Looked into what was needed via hours of research. Used SuperOneClick to root phone (Success), installed ESFile Manager to help install mod 3e recovery (success), used ROM Manager to flash CWM (Success).
Upon testing the CWM by booting into recovery, this boot screen issue started.
- I've tried hard resetting, (no success, won't go past the Samsung screen).
- I'm currently using Odin to restore stock firmware, but it's been about 25 minutes so it's probably not working.
- I can only get to Samsung screen and download mode, that's it!
I need my phone and I need to get some sleep. what am I missing? Much appreciated
thanks

here's a shot of Odin right now. It's stuck on "setup connection"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best

dginsd said:
Here is what I used to Un-boot loop my phone worked like a charm, the instructions we're a little un-clear but if you read through it, a few times, it's really rather easy. You need to download Java (Jave Runtime Enviorment, also known as JRE I used OpenJDK Java 7) on your computer, download the Heimdall one click packages, put your phone in download mode:
-Pull the battery out and make sure the phone is NOT connected by a usb cable.
-Put the battery back in!
-Hold vol up+Vol down. DO NOT PRESS POWER.
-Plug in the USB cable.
Open the downloaded heimdall one click with java (in Ubuntu Context menu Windowz is likely the same) and it will return your phone back to stock which is where you want to start for I believe almost all the JB ROMs. If you search around Quickster made some other One click packages to get you rooted and CWM installed as well as Kernels and other stuff. These things work great and to me are a million times easier than every other method.Good luck and if there's any other help I can provide I'll do my best
Click to expand...
Click to collapse
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed

mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
Perhaps try to use the Heimdall "back to stock" while in that Emergency mode. The Heimdall program will also tell you if it recognizes a phone attached in download mode, and if it will recognize the phone and flash you back to stock, you can also have it put you back on stock bootloaders which sounds like your problem (though flashing bootloaders is dangerious but in your case may be nessessary). Maybe PM Quickster see if he recommends trying to flash with Heimdall on that mode you've entered, I might also try using an alternate USB cable if you haven't already.

mendozer said:
I can't get into download mode anymore. I used to be able to prior to trying Kies. Now I can only get to an icon with a white phone with two dots and a computer icon with a yellow hazard triangle in between them (emergency mode logo). I can't get to any download mode no matter what, at least that's not displayed. I think Odin recognized it last night with this new emergency mode, but everything i tried failed
Click to expand...
Click to collapse
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium

psal217050 said:
The computer icon with a yellow hazard triangle in between them is a form of download. Use Heimdall after making sure you have the correct JRE and drivers.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I have the stock firmware from Samsung. that includes the drivers I presume? the md5 file

holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?

mendozer said:
holy smokes I'm so relieved it worked!
So, I used Heimdall's froyo Uck3 firmware or whatever since that's what was in the package. I still want Jelly bean. I have the JB folder with what I suppose I need (think it was from android geeks). However, since this was painless, is there a Heimdall one click for JB?
Click to expand...
Click to collapse
I haven't seen a Heimdall for JB, or any custom ROM I think because it requires a special PIT file to make. I used this ROM http://forum.xda-developers.com/showthread.php?t=1776129 To flash It though you have to be on the Gingerbread bootloaders, and the instructions for flashing it want you to even flash CM9 ICS, before you flash the final JB ROM. Basically follow the instructions thoroughly or you'll end up in a boot loop ( Not that that's a big deal, now that you have a quick easy way out)

meanhs sal
darn, I'll have to see if JB is really worth it to take the chance again. I also noticed that froyo version from the Heimdall is quirky with some apps. I turn the phone on and several apps just close on me. I get the buzz of death (the one and three) as i like to call it

I'm pretty sure there's Gingerbread version of the Heimdall one click, I'd flash that as almost all the newer Roms are going to require you at least have upgraded to the Gingerbread bootloaders.

j3 2017 dont boot after flash

hi i flashed j3 2017 with odin.the final result was passed but the phone dont boot.it goes only to odin download mode. any solution

ntamvakeras said:
hi i flashed j3 2017 with odin.the final result was passed but the phone dont boot.it goes only to odin download mode. any solution
Click to expand...
Click to collapse
Well, I'm no expert on booting, but I would try this. First, pull the battery to shut off the phone. Second, reinstall the battery and Press and hold "Volume Up+Home+Power" buttons at the same time till your phone is on,then your Samsung will enter Recovery Mode. It takes a while to get to the recovery screen so be patient. You may see the dead android for a while, but after a few minutes you will get the recovery menu. From there you can try reboot system and see if it will boot for you.
Good Luck!

BigZ1 said:
Well, I'm no expert on booting, but I would try this. First, pull the battery to shut off the phone. Second, reinstall the battery and Press and hold "Volume Up+Home+Power" buttons at the same time till your phone is on,then your Samsung will enter Recovery Mode. It takes a while to get to the recovery screen so be patient. You may see the dead android for a while, but after a few minutes you will get the recovery menu. From there you can try reboot system and see if it will boot for you.
Good Luck!
Click to expand...
Click to collapse
Forgot to ask you a question. I have a J3 that I'm trying to unlock the boot loader. If you get yours working, would you mind checking your developer options to see if you have the button for OEM unlocking? I would appreciate it. Thanks

BigZ1 said:
Forgot to ask you a question. I have a J3 that I'm trying to unlock the boot loader. If you get yours working, would you mind checking your developer options to see if you have the button for OEM unlocking? I would appreciate it. Thanks
Click to expand...
Click to collapse
I did that but nothing is happening. Only volume down home end power combination works

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Did you hold the keys down continuously? That is to say, until you either get recovery mode (or in your case bootloader mode)? If you let go of the key combo after seeing the Samsung J3 screen, you let go too soon. I've always had success with getting into recovery that way. Try it again.
If you truly can't start up in recovery mode, I think you may have wiped out your recovery partition. I'd suggest you use Odin to flash it again.

I just tried booting into recovery mode and then reboot to system. If you can get to that point, you are home free. If you can't get to recovery mode, I think your best bet is to try to reflash with Odin. Maybe you got a bad download. Consider getting a fresh download and reflashing with Odin.

One more thing you might be able to do. IF you had usb debugging enabled, you could connect the phone to your pc, and issue a fastboot command "fastboot reboot" which would reboot you into the system.
This reqires some level of technical skill and some setup work to get fastboot installed (on windows) or if you have a Linux computer, fastboot is probably already installed.
The above is only going to work if you had the developers option for usb debugging turned on before you flashed the phone, and even then it may or may not work, depending on how far the phone gets while booting.
I think at this point, your best option is downloading a fresh copy of your system image from Samsung, and reflashing it with Odin. Hoperfully it will still connect to Odin, since it's already in bootloader mode.

This phone was fully functional but had broken screen as you see. I left it and I ordered a new from aliexpress. After one month the new screen came. I took the phone for charging but it gave a signal that battery not charged. And the phone not opened. I placed a new battery for charging but still couldn't get to menu and I did a wipe data factory reset but nothing happened so I decided to flash it with odin but while the flash is OK the phone don't boot. When I try to charge it is gives a green screen

ntamvakeras said:
This phone was fully functional but had broken screen as you see. I left it and I ordered a new from aliexpress. After one month the new screen came. I took the phone for charging but it gave a signal that battery not charged. And the phone not opened. I placed a new battery for charging but still couldn't get to menu and I did a wipe data factory reset but nothing happened so I decided to flash it with odin but while the flash is OK the phone don't boot. When I try to charge it is gives a green scree
Click to expand...
Click to collapse

After you flashed it, and rebooted the phone, how long did you wait for the phone to boot into system? It takes a long time (like maybe 15 minutes) for it to get to the point where you do the initial configuration. If you can try flashing with Odin again, give it at least 15 minutes to get through it's initialization process. That might be what went wrong. Just a guess on my part, but that's what I think. Let me know if it works.

VID_20220727_202947.mp4
drive.google.com

ntamvakeras said:
VID_20220727_202947.mp4
drive.google.com
Click to expand...
Click to collapse
I did all this but nothing happens I don't see the Samsung logo only a green screen. I upload a video to see what I doing

I wish I could help you. I think you are doing everything right. This problem exceeds my knowledge. Maybe someone else smarter can help you.

OK thanks a lot for your assistance

ntamvakeras said:
OK thanks a lot for your assistance
Click to expand...
Click to collapse
I don't know if you are still trying to fix your phone. If so, you might try experimenting with the ODIN option for reboot after flash. Try turning it off, flash with ODIN, unplug cable, pull battery and re-insert, see if it will boot (be patient, it will be slow). If that doesnt work, pull and reinsert battery, then try to boot into recovery with keys.
Just an idea... might get lucky.

BigZ1 said:
I don't know if you are still trying to fix your phone. If so, you might try experimenting with the ODIN option for reboot after flash. Try turning it off, flash with ODIN, unplug cable, pull battery and re-insert, see if it will boot (be patient, it will be slow). If that doesnt work, pull and reinsert battery, then try to boot into recovery with keys.
Just an idea... might get lucky.
Click to expand...
Click to collapse
I did it but nothing happened. The matter is that the phone don't power on after flash. I don't know what else to do

Hello ntamvakeras, on the first video I tell you that in option you manipulate in pit. I have an old j3 2017 I managed to install official Firmware and then install TRWP, the J3 cable is the good one I didn't have the good is we change it worked.
When you use in option pit these why you do this, I flash I don't touch pit.

ntamvakeras said:
View attachment 5669359
Click to expand...
Click to collapse
Will never boot FRP lock and OEm are On i think a account is hanging to the phone , boot in recovery samsung mode and wipe data factory reset from there , reboot

meric57 said:
Hello ntamvakeras, on the first video I tell you that in option you manipulate in pit. I have an old j3 2017 I managed to install official Firmware and then install TRWP, the J3 cable is the good one I didn't have the good is we change it worked.
When you use in option pit these why you do this, I flash I don't touch pit.
Click to expand...
Click to collapse
HI I did that because I have done a lot of experiments in this phone. I know that is wrong but I did that as last way to recover the phone