Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
UPDATE 2010/03/29
a half solution is to start the car, then turn the BT on the phone, then it works perfect.
the reason why his is a HALF solution only: next time you start the car you have to start BT on the phone again ( I am used to have my BT working 24/7 )
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
You could always buy a more expensive phone to go with that expensive accessory
Only joking
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
Not BMW, but I have it working perfectly paired with my Ford car system. So I'd suspect is most likely a settings isue one side or the other rather than anything fundamental.
well I have noticed that it works well with newer idrive models, but mine is 2005 MY so no idrive and no luck
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
souljaboy said:
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
Click to expand...
Click to collapse
or no, the phone book is excellent
it is not being able to call or receive calls what bothers me
and as I said, it works with newer iDrive BMW
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
souljaboy said:
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
Click to expand...
Click to collapse
Yes, I have tried 2 bmw forums, but they do not know about WM 6.5 much
this is my first WM phone, all the other phones worked in the same car.
I managed now to get sms to show on the screen of the car, but calls is more important
people here in HD2 forum said they exange some big (5-6 digits) number in the registry and it works for them, but I am pesimistic about this because they have different BT stack, right?
HD2 - widcomm
TG01 - MS
well it never hurts to try , just make sure u can undo it .. tho if the regkey contains "htc" somwhere it most def wont work
I have downloaded a utility for enabling rSAP profile on our phone - it did not help...I then disabled the rSAP and a miracle!!!
I managed to place 2 calls already. I hope on next connection with the car it will still work
what is this miracle program which lets you enable the rSAP? I need it too!!
youbrokeit said:
what is this miracle program which lets you enable the rSAP? I need it too!!
Click to expand...
Click to collapse
search this forum "rSAP"...but before you do a short update:
of course on next connection, nothing worked ...and I have updated to the new rom and did not install rSAP and I was able to obtain the same result...this means it has nothing to do with my previous success
this situation is driving me grazy already...I do not know why sometimes i can get it to work perfectly by just switching BT on and off.
today i have wasted many hours just turning it on and off trying to find the rule, working combination - so far it seems to work at random
and if I get it to work it works for the next call and the next...until I get out of the car. when I start the car again it does not work r-r-r...how can I take a "snapshot" of the phones state when it is working and somehow replicate this state every other time I am in the car?!!
please help me
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
souljaboy said:
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
Click to expand...
Click to collapse
a SR does indeed fix it, but only until next disconnect...when I came to the next day it is the same story again
I refuse to believe that this just a normal thing for WM (although having for the last couple of years only blackberries, I miss their stability and auto on/off function) ...even WM cannot be THAT glitchy
anyone?
I think I am onto something here:
if the BT is switched on after I start the car, everything works perfect!
the only inconvinience now is switching BT on/off for each jorney (especially annoying during short trips with short stops - to the local shop, post office etc)