Related
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
I have the same problem.
Any solution? Thanks
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose
Reboot the PPC the check..I am using Jabra 8010 without any problems
Thanks for your suggestion~
But I reboot many many times~
But still fail~
Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me
hs 820 ,same problem
i have bt8oo and it works fine , any problem .
firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d
All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.
Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks
We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?
Plantronics Discovery™ 640 - the problem is the same.
josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6
bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation
I updated to Jwrightmcps Crossbow ROM Update 2.02.02 WWE yesterday and very happy with it.
Only problem i have is that callers cant hear me through my bluetooth headset (I can hear them though). Its a Bluetrek G2 and was working fine before the upgrade.
Any got any ideas?
I have the same problem too, but I'm using a nokia HS-12W. I think there is some comments about this problem in Jwr's 2.02.02 thread, but no solutions wet.
I have the same problem too. I'm using a Jabra BT headset with vibra
Same problem : Plantronics 590A
- OK for stereo audio
- OK to ear caller
- Caller can't ear me
Same problem here with Motorola H500!
Same problem with Motorola H700
Used to work fine with previous ROM.
Tried downgrading to 2.02.00 but H700 still does not work...
I also tried with another phone but the mic does not work. Either my H700 broke during the same few hours that I was upgrading to 2.02.02, or something in the new ROM affected the H700 firmware.
Any ideas ?
Bluetooth
Same problem with Jabra BT250v.
rom 2.10.6 same problem with headset motorola H500
New WM6 rom posted by Ivan has a better bluetooth implementation.
Jabra BT250v, it works!!!!!!!!!!!!!!!
Hi
The Problem is the bluetooth name from headset. "Jabra BT 250v" does not work! "Jabra BT250v" does work! The problem are the spaces.
tme74 said:
Hi
The Problem is the bluetooth name from headset. "Jabra BT 250v" does not work! "Jabra BT250v" does work! The problem are the spaces.
Click to expand...
Click to collapse
what???
you're kidding.
im gonna try this first thing when i get home.
tme74 said:
Hi
The Problem is the bluetooth name from headset. "Jabra BT 250v" does not work! "Jabra BT250v" does work! The problem are the spaces.
Click to expand...
Click to collapse
Doesn't 'Jabra BT250v' also have a space in it ?
so why does that work, and 'BT 250v' doesn't
2 spaces
The problem are the 2 spaces!
How about 'Motorola H500' with just one space? any idea?
Bluetooth
maybe too long?
chuotdx said:
How about 'Motorola H500' with just one space? any idea?
Click to expand...
Click to collapse
'Jabra BT250v' is 12 and it works.
'Jabra BT 250v' is 13 and it does not.
'Motorola H500' is 13 chars long and it does not.
The number of spaces is obviously irrelevant.
Just it looks like Maximum length is 12 chars.
Can anyone confirm this ?
I've tested 02.02.02 and found the same BT headset problem that is discribed.
People couldn't hear me. I think I had the same problem with either the DarkForce rom or the PDAVIET rom.
My headset name is: "BlueTrek G2"
which is a total of 11 characters
So maybe it has something to do with even/uneven numbers ?
11 and 13 don't work, 12 does.
"Motorola H350" works....
... and it is 13 Characters long !!!!
Bravo 12, 13
Very strange, I shorten the name from "Motorola H500" to "MotoH500" and it works, the other party hear me!!! will stay with 2.02.02 til there has official WM6, fed up with reflashing ROM. Anybody with BT headset problem should try! Good luck!
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-
Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.
BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?
I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.
I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/
Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )
Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards
Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)
I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks
i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't
I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.
With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5
I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...
Hello all,
I have pulled the Bluex program from one of the other build an ion version and trying to get it on hero. But any time that I search for devices i get an error "Error in local device (power disabled?)" any one know why that it does that or how it can be fixed. any help would be geratly appreciated.
The Hero Bluetooth drivers are all messed up, that's why it's not working.
sorry 4 OT, but
imho there should be no support for apps, which you have not bought in the market!
uh..
I don't think he's trying to pirate software, I think he just wants bluetooth transfers. I understand his desire as well, as I also like transferring pics and music through bluetooth.
Caid.
444
Yeh I am not trying to pirate software at all. It was included in one of the other builds that i have downloaded from here before. It did work on the build. I am able to use the bluetooth on the Hero rom for calls and music just that this application don't work. Just was wondering if anyone knew if I can just try and use the bluetooth files from the other build and push into the Hero rom but as I was looking over everything it does not seem to be just a overlay but a different version of the OS not just standard 1.5 with a fancy UI as I had thought. Does anyone know how that I can pull the config files from the 1.5 and put on hero I have had no luck so far.
bluetooth issues
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
facevalue said:
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
Click to expand...
Click to collapse
Theres usually different profiles that handle a handsfree connection to your car, and different ones that handle audio, so in this case A2DP for stereo headset. Other then that, I would know nothing else on how to go about fixing it. Unless your up for a complete reflash...
masterveovis said:
Hello all,
I have pulled the Bluex program from one of the other build an ion version and trying to get it on hero. But any time that I search for devices i get an error "Error in local device (power disabled?)" any one know why that it does that or how it can be fixed. any help would be geratly appreciated.
Click to expand...
Click to collapse
Same Problem for me.
facevalue said:
I can get the Hero bluetooth working for stereo but it won't connect for calling.
I'm attempting this with my car's bluetootn (2009 acura tsx)
I can start a call but when someone answers, there's no sound.
Once again, bluetooth stereo works like a charm.
Tried a bluetooth stereo headset with exactly the same result,
Any ideas?
Click to expand...
Click to collapse
I also have the 09 tsx and been trying to get my magic to transfer my contacts to the car but doesnt work. nk02's ion rom works flawless on cars. the hero roms not so great. maybe we have to wait for the next update from google to get proper contact transferring among other profiles?
I have the same problem
and as it to see,there is no solution so far.
I have the same problem with Hero ROM.
When I want to send file this error appear: error in local device (power disabled?)
And I can not receive any file.
Can anyone solve this problem?
Hi everybody. I'm new to android. Recently i fleshed the ROM This is what i have now: Simply Honey 3.2 by SGT
Ever since the new ROM my headset isn't working. I can hear the noise when i move the plug in n out but no sound.
Other thing i cannot turn my Bluetooth on either. It says turning on but after a while it goes back to it's original state.
Any help would b greatly appreciated.
i would say try a new rom, it may be a bug in the bluetooth. Or if its a wired headset it may just be the phone. In short, flash a new rom and report back.
The phone is good. Tried 2 diff headset. B4 this ROM both was working perfectly. I believe it's a known bug and there is a fixing in Settings but i cannot find where it is.