Database Info

JABRA BT200/XDAII Reconnect/Bonding problems

I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding

hey ian,
it was just recently that i was able to figure out the bt-xda2 bonding; thanks to some helpful chaps in the forum. in the process; i did some research within several topics and read something which may answer your query. when the headset is back in it's cradle; i believe it's "turned off" or is put into inactive mode. the forum message i read indicated that the bonding is lost once the headset is turned off; thus you have to bond again. yes, i have had similar experiences while figuring out the bonding issue. i just keep the bt200 i have out of the cradle; when the time comes to charge it i then holster it and repeat the bonding process once it's charged. i don't think it's a problem with neither devices; it's the default setting i believe. with luck probably the xda-developer guys will come up with a bug fix for this item. which could also include using bt for other than the phone function...like mp3....hint! hint!
cheers
robson

Ian_Goulding said:
I have been using a JABRA BT200 Headset with my XDAII and have always had the same problem, once the BT200 has been paired with the XDAII it works fine but once I put the headset into it's charging cradle and then remove it and try to use it again it always loses it's bond, the only way I can get it to communicate with the XDAII again is to pair it again.
I don't know whether the problem lies with the BT200 or the XDAII
Does anyone else have this problem ???
Thanks
Ian Goulding
Click to expand...
Click to collapse
I've installed Towa's GPS BT patch and the Jabra works perfect.

hey redbull,
what's the Towa's GPS BT patch and where can i find a link?
cheers mate
robson

Towa's gps patch has nothing to do with this...
I'm not sure what you are talking about, but Towa's patch will not solve the Jabra BT200 issue. The more important question to look at here is what version of BT200 you have. If you look on your Jabra BT200 right next to the microphone, there is a combination of letters and numbers, what does yours say? I think the problem has to do with issues in the firmware in the Jabra that were fixed in later versions.
It's usually 2 numbers and a letter on the boom to the Microphone.
I have a 47A and it does not work at all. Also tested a 48A and it doesn't work either.

mine's a 48b. works fine.

Cool, just so we are talking about the same thing, you can turn off the Jabra BT200, and turn it back on, and it still works with the phone? You can charge the headset in it's charger and pull it out and it still works? You can go out of range and then back in range and it still works? You can press the answer phone button on the headset when no call is in progress and then try to make a call and things still work?
Please try these various things and let me know.
I know that the A models are from 2002, and the B models are 2003. So it is possible if yours works with all these scenarios that they fixes or changed something in the 2003 models that allow them to work.
Thanks for your time,
LouisK

I recently purchased a BT 250 with nr. 44B and indeed it works with all the tests you described. (Don't need the BT GPS patch for that)
If only the advanced Headset Profile features would work with the MDA II I would be in heaven...........

Ok, it seems based on feedback I've gotten from several people that any Jabra Freespeak that has a "B" as the last part of it's version number will work correctly, but the "A" models do not. The "B" models according to Jabra are the most recent, and thought they don't admit it, there must have been a change in the firmware that allows the "B" units to work correctly with an XDA2/MDA2/i-Mate that the "A" units don't support.
LouisK

I have a "B" on mine and the same problem of rebonding when Jabra is shut off. I experimented by turning off bluetooth on the i-mate and it still worked. Anyone have ideas of a good headset that will not need rebonding?

I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....

48B works fine for me... can't everyone else just use TOWA's patch... that fixed the problem for others

stryker said:
I have problems with mine too and its a 16B. Turn the BT headset off and its rebond time again.....
Click to expand...
Click to collapse
16B is no good. I've been told that minumum needed is 19B. Below 19B is bluetooth 'handsfree' not 'headset'.

Towa's patch has nothing to do with this. It will not help in this situation. It only applies to Bluetooth Serial Profile, of which the Jabra has none. I have talked to Towa via email to confirm this. For those that installed Towa's patch and said it works, more than likely they didn't have the problem anyway because of the version of Jabra they had.

BT jabra 200/plantronic M3000
Jabra is model 45B, - no nead to repair, Plantronics M3000, no need to repair, but sometimes fails to answer call properly.

Hi 2U all,
I have just purchased a BT200 off Ebay, the number on the boom is 20B. No problems works well , no rebonding problems. Just one wish, it would work with voice. But I will keep praying!
StayLucky Jim :wink:

EMAIL FROM JABRA RE-Bonding Problems with XDA-II
:roll: :roll:
Dear Ian,
Thank you for your e-mail and please accept our apologies for the delay in reply.
We are sorry to hear you are experiencing problems using your JABRA BT200 headset in conjunction with your O2 XDA II.
However, having tested the JABRA BT200 headset with the XDA II, we have encountered the following problems.
When completed charging the headset you will need to synchronise the Headset and the Audio Gateway in your XDA II.
Please follow the steps below:
Select Bluetooth menu> Select Off> Select OK (BT is now disconnected)
Return to desktop (Today view)> Disable BT HS mode> Enable BT HS mode (User
to be prompted to turn On BT radio)>Select OK
Enter BT menu> Select On> Select OK (The XDA II returns to the "Today" view
and will try to synchronise with the HS again.
Check connection by establishing an outgoing call. If no sync - you will need
to re-pair the two devices)
We hope this will solve your problem for you. If you require any further assistance please do not hesitate to contact us again.
Thank you for contacting JABRA Customer Service, Europe
Camilla Vang
Customer Service Representative
GN Netcom, Mobile Division (Copenhagen, Denmark)
Click to expand...
Click to collapse
Seems to me that without actually saying it, JABRA think that the fault lies with the XDA-II!
Regards
Ian Goulding

question?? does the bt200 2.5 work with the imate and a i95c at the same time??
i have two devises an I95cl for nextel not blue tooth and the imate pc phone. i would like if possible to use one headset ?? the bt 2002.5 says it will work for bt phones also?? but will it work at the same time ?? hope iam clear...iam a baby here can you tell

15B, can it be upgraded?

Hello everyone...
I have an MDAII and a Plantronics M3000 BT headset and I have the same pairing problem.
I always have to repair the two divices for them to work...
Any ideas?
Best regards,
Rayan

Jabra BT-800 not working w Qtek 2020 WM2003SE

I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.

me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.

Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??

bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers

Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks

Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly

The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD

Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.

DarkForce Rom 2.10.2WWE / Bluetooth problem.

To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose

I have the same problem.
Any solution? Thanks

firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
not yet.
jose

Reboot the PPC the check..I am using Jabra 8010 without any problems

Thanks for your suggestion~
But I reboot many many times~
But still fail~

Same problem here
Headset = Bluetrek G2
I can answer calls with it, but ppl can't hear me

hs 820 ,same problem

i have bt8oo and it works fine , any problem .

firering said:
I have the same problem.
Any solution? Thanks
Click to expand...
Click to collapse
Also,this problem happen in i-tech R35d

All, I had problems with every WM6 rom, varying in seriousness. However, this one meant you can't use it at all (Blutrek G2). So I bit the bullet and bought a HBH-PV700 fo 19.99ukp. Have had no problems since.

Bluetooth problem
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose

The Bluetooth needs serious work
Hey ,
I've been using Nokia BH-900 headset and the vioce quialty etc is fine the only problem i am facing is that every few hours the connection just drops and i have to reconnect the bluetooth headset. Also BTGPS is not just working for tomtom or co pilot.
Any suggestions on how it would be possible to use one of the older bluetooth stacks from the original roms would be a great help.
Thanks

We have two families of wm6 roms: universal specific (Indra, Helmi, Jwright, Pdaviet up tu 08) and Athena derived (DarkForce and latest Pdaviet). Bluetooth on them share the same problem present in aku1.x original universal rom: after a random number of houres it turns off and up to now we don't know why?

Plantronics Discovery™ 640 - the problem is the same.

josedias said:
To All,
I've test the ROM 2.10.2WWE with the Jabra 250v and I found a Bluetooth problem.
You can pair the Jabra 250v easily,
But when you make a call, nobody can listen to you, meanwhile you can listen the other person.
I've teste with the Jabra620s it work fine with Mp3 end the head phone.
Finally I deduced that the ROM WM6 had been modified to function with Bluetooth V1.2, the Jabra 250v was made for BT v1.1.
This is the problem that we are facing.
Somebody have any solution?
Best regards,
jose
Click to expand...
Click to collapse
same problem with all wm6

bluetooth and probs
well hope there is some serious discussion going on in the big wigs for the bluetooth stacks. All of you are using lots of energy in between the 2 stacks of Microsoft and Widdcomm. Personally I prefer widdcomm but please get atleast one of them working for sure with everything
BTW the nokia headsets are working fine with all the WM6 versions I have used. Only the BT goes off after sometime with the blue light still flashing and then even the nokia cant do much.
Any help is worth a million

on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.

beginner said:
on my side the problem was with a parrot. It was solved after change the power off when running on batteries on the pda. Now it connects ever.
Click to expand...
Click to collapse
Isn't that due to the fact BT switches off when the uni switches itself on with incomming calls comming out of hibernation

Parrot CK3100 BT carkit and WM6 problems

Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.

BT-Parrot-Trinity-WM6
Pls. 1.update Parrot met latest version- www.parrot.com
2. update Cyberon / cyberon patchCVSD: www.cyberon.com.tw
( http://www.cyberon.com.tw/upload/qa1/CVSD_Patch.CAB )
-Maja-

Parrot has latest sotware.
Have installed the patch and will let you know if it improves.
Thanks for the quick reply.

BT-Parrot-Trinity-WM6
abeesley said:
Ever since I upgraded my M700 to WM6 I have had no end of problems using my Parrot Ck3100 bluetooth carkit and my phone.
It worked perfectly with WM5 but I have since upgraded with various versions of WM6 from AXL and Mary's version. I've also tried various different radio ROMs up to the latest 1.50.08.11 but no difference. These are the problems I have been experiencing:
1, Intermittent loss of link between phone and Parrot.
2, Call not routed through car speakers even though BT is connected.
3, Sometimes the audio is lost completely as the phone thinks it has diverted it to the car speakers, when it hasn't and mutes the phone. Other times the music note with the line through it (mute?) is on during a call.
4, Calls dialled through Parrot dial, but voice goes through phone.
5, Parrot reboots itself after a call.
Although since uprgading to WM6 I now have network name, signal strength and battery level on the Parrot, it's main usability has become very frustrating as it only seems to work as advertised 25% of the time. I have checked the firmware on the Parrot and it has the latest version and it still works perfectly with my friends' Sony Erricson, so I know it's not a problem with the Parrot, only WM6.
I have also tried JETware BT stack, but it didn't make any difference, the same problems persisted.
Click to expand...
Click to collapse
Have exactly the same problems... WM5 worked perfectly with car kit, but since ROM flash update to WM6 never worked the same way then...
Perhaps a flash update to parrot car kit solves the problem...
Any new issue after this?

I've given up on wm6 at the mo. I use a parrot mini and have the same problem with all the wm6 roms I've tried. Have gone back to wm5 and no problems.

I had same problem
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!

Parrot BT problems
tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I checked my CK3100 firmware version and confirmed that is the last one 4.16_C.
I'll try to install the that same BT extension an let you know...

tower5 said:
last sunday I had the unlucky idea to update my CK3100 ; until that it worked perfectly with my HTC p3600 with WM6.
After a short period , I found a solution installing JETware BT HFP Extension 1.31; now everythingh is perfect , contacts are well syncronized , every indication is ok , etc. any residual prblem !!!
Click to expand...
Click to collapse
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.

BT-Parrot-Trinity-WM6
dateboy said:
I have the same problem. Were I can find CAB for these jet truth BT HFP Extension 1.31 ? Pls. THX.
Click to expand...
Click to collapse
Have installed and works far better now.
Entire weekend without a problem.
Go to JetWare website http://www.jetwaremobile.com/

Parrot BT Problem
i s my post from Parrot:
Hello sir ,
Thank you for your feed back ,our technical engineers are currently doing some advance tests regarding this issue
Inorder to find solutions.
Moreover you can try this procedure inorder to connect your phone with the kit :
First of all , please delete preving paring settings which is present in parrot ck3200 ( settings/ paried devices )
And also in your phone .
And repair your phone by using the menu « disable syncho »
Regards,
Parrot
( maja )

Hi all,
I have just updated my SPV M700 to udk 6.0 Italian WM6 ROM and I'm not able to pair it with my Parrot CK3500 (or Ck3100) hands-free kit...
I have applied both patches from JetWare and Cyberon but still got connection error...
PDA says that connection security code is not recognized by Parrot and Parrot display says that "Bluetooth connection failed".
Anybody can help with this problem?
Thanks
Regards

Parrot and probl.WM6- ck3200,
Hi, is my 3 post from Parrot:
Hello sir ,
Thank you for your feed back , Indeed We notice some issue regarding the phones working in windows mobile 6 et ck3200,
So we are currently doing some advance tests regarding this issue .
And also we get feedbacks from clients, who mentionned us that in software version 2.03 E windows mobile phones works better than in 2.11 .
I can provide you the software version 2.03 e for ck3200 so that you can test it with your windows mobile 6 phone .
Regards,
Daniel PRASANTH
Customer Service
Parrot
174 Quai de Jemmapes
75010 Paris
France
(maja)

I have a new Sprint 6800 -Mogul (ROM 2.09.651.3) with WM6 (pro CE OS 5.2.1238) factory load . I am trying to get it to work a Bluetooth car kit.
Originally tried a Motorla HF850 and had dropout problems (paired and connected great then randomly dropped the connection.
Just bought a Parrot CK3100 (firmware version 4.16c) and it is experiencing exactly the same problems as described by abeesley (thread item #1).
Scattered throughout various blogs is the same theme, this phone has bluetooth issues but there is no consensus of where the problem is or what to do to fix it.
Does anyone know of a fix?
If not who needs to be chased, Sprint, HTC, Microsoft, Parrot
This is getting very frustrating
Thanks

i deleted all pairing from both sides
paired the device with parot
name appeared
but phone both and call register didn't

I have just had the 3200LS installed into my car and am having similiar problems. Most notibly, whenever the phone rings and i press the answer button on the parrot, it disconnects the bluetooth and then i cant hear anything. It does this every single time, but works fine (well 80%) when i dial out from the parrot.

With my Motorola HF850, I have the same issue referring the route to the CK speaker when answering a call. I tried to install all the software/Radio ROM...no way! MY P3600 WM6 does not want to work properly...while no issues running WM5

I have the same problem with the Parrot minikit and HTC TOUCH
Hi all,
I just bought the Parrot minikit, and I am facing the same problems with the HTC TOUCH.
The minikit is paired perfectly, when I dial a number from the TOUCH, the sound of the call remains on the TOUCH, only when pressing the answer button in the minikit it sometimes transfers the call to the minikit.
I opened a SUPPORT case to Parrot and they are saying:
"We have fully tested the HTC Touch in France with our Minikit and we did not see any impediments. "
So I emailed them back with allot of links describing the problem.
Good luck to us all

The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...

BT-Parrot-Trinity-WM6
fl3nd3r said:
The issue is for sure within the new Bluetooth stack in the WM6...it weould be great if we could roll back to the WM5 one...
Click to expand...
Click to collapse
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.

xmaavx said:
Hey man,
I had all the trouble described above, and i did a lot of things (tried another wm6 rom, for ex.) and never had problems since.
Try to:
1st - remove pairing bluetooth devices both on phone and Parrot
2nd - pair again both
3rd - If still having problems, try a different wm6 rom or install the JetWare BT extension (don't forget to repeat steps 1st-2nd, after install/update)
This should work.
Regards.
Click to expand...
Click to collapse
Hi, thanks for your hint. Unfortunately I tried with all of these stuff, but still having the same [email protected] moment I run Lasagna ROM 3.05 KE Full with Jetware ext...and still struggling...I'm desperate....the only way to make it works is to roll back to WM5...but I do not want...

Problem Htc Touch Cruise and Bluetooth Headset

Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!

Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !

academic said:
No problem with my Samsung WEP200 BT Headset. In my case it work much better than with my old P3600 where people always complain about bad sound when I was in BT.
To be sure that your problem isn't linked to the Polaris, you should test with another headset.
Good luck !
Click to expand...
Click to collapse
Thanks for your answer!
I try with another headset...

Sirius75it said:
Thanks for your answer!
I try with another headset...
Click to expand...
Click to collapse
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.

Sony Ericsson bluetooth headsets work also just fine.

butzchan said:
I had similar problems with another HTC phone, same Motorola H700. Seems that the H700 might be the problem. I also use a Jabra without problems.
Click to expand...
Click to collapse
I have the same problem with my Motorola H700!
Going to try an old Jabra headset this evening.

Sirius75it said:
Hi and sorry for my bad english.
I have a problem with my Htc Touch Cruise and my bluetooth headset Motorola H700.
The headset worked fine with my ex P3600 but with TC have this problem:
when i receive a call, the headset responding correctly but after few seconds the audio disappears despite the bluetooth connection is ok!
If i shut off my headset the call continues regularly on TC, but if i re turn on the headset work correctly for few second and after stop.
The only solution is soft reset or turn off the bluetooth connection with commmanager and restart.
Someone have same problem?
Thanks to all!
Click to expand...
Click to collapse
I have the same problem and sometimes I re-apply pairing between the headset and my polaris

same problem with Motorola H700. and olso motorola HS 810
They seem not to be compatible

I have reconnect my old carkit bluetooth Parrot CK3000 Evolution and with my HTC Touch Cruise work very fine!
With my old P3600, the parrot ck3000 evolution don't work fine but have problem with audio and connection, therefore i had unplugged and i had buy the headset Motorlola H700 thed worked well with P3600...

Same problem with Jabra headset
I have also exactly the same problem with a Jabra headset.
I found that the problem only occur when bluetooth is first activated on HTC and then activated on the headset. if I do it in the other way it works fine.
that's also the reason why it works after a soft rest of the HCT or disconnection reconnection of bluetooth on HTC.
Does it only mean that the headset is not compatible or is this a problem on the HTC.
Vincent

I don't know the bluetooth 2.0 + edr is compatible with motorola headset
perhaps a bluetooth incompatibility
i read on it http://direct.motorola.com/ENS/HKernel/H700_Headset_detail.asp
this : # Bluetooth Class 2 for wireless connection of to 10 meters
(30 feet)
# Compatible with Bluetooth 1.2- or 1.1-enabled mobile
phones, PDAs, PCs, and more that support headset and
hands-free profiles

I had the same problem with the H700. It connected fine the first day, and I used it for about 15 minutes. The next day, it wouldn't stay connected at all. Tried to re-pair, etc..no luck. My Jabra BT-125 works great, as does my LG HBM-730.

HTC patch for bluetooth
I saw on HTC (in the e-club section) that there is a patch for Touch (is it touch only or touch cruis also? I don't know) regarding "bluetooth connection problem".
Unfortunately I cannot download it.
If someone can do it, I'm interested.
Vincent

First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise

Where I can found the patch ?? I want to try it on my cruise. If don't work I will restore all with a backup file...

you can found it on HTC web in the e-club section. If the patch works properly write it in the forum please!

mesmo said:
First of all sorry for my bad english!!
What about the patch for HTC TyTN II? this one seems to be like htc cruise, both of them have the same specifications, may be this patch work on HTC touch cruise
Click to expand...
Click to collapse
Same specifications but different motherboard. Don't try it.

Ok......... thank you, I'll wait for another solution

After more and more test, I have found that the problem of the motorola Headset HS850 (and I think H700 etc. etc.) is the boom switch.
If you pair the headset to the Cruise and use it, it works fine (not stop after 3-4 seconds). Works great also bluetooth audio program:
http://www.freewarepocketpc.net/ppc-download-bluetooth-audio-v1-0.html
for redirect all audio to the headset.
But... if you switch off the headset with boom close, next time it will not work more than 3 seconds
So, the problem on this motorola is the automatic connection when open the boom.

Sony Ericsson HCB-700
Hi. I seem to be having similar problems. I had 3 phones linked to my HCB 700, and all worked fine. Very occasionally, I would have found that one wouldn't pair up when the ignition was switched on, but with my old Orbit 1, that may have happened once a week. I got a new Orbit 2, and was able to pair it easily. Now, it never fails to start paired, but frequently drops the BT connection. Usually a simple button press links it again, but it will rarely stay linked for more than 30 minutes, and could drop the connection 3 or 4 times in 10minutes. Then it may work for 30 minutes. I tried a reset to default settings, and re -paired the two again, but it doesn't seem to have made any difference. This can happen whether I have used the phone or the handsfree or not.. I'm thinking of getting a Parrot kit now instead - any ideas? Thanks in advance..