(NOTE TO MOD. PLEASE MOVE THIS POST TO THE INFUSE 4G GEN SECTION. THIS ISSUE MIGHT APPLY REGARDLESS OF THE PHONE BUT MY PHONE IS A INFUSE. THANKS.)
I seen this subject discussed but never really saw a answer, seems like everyone resorted to re installing firmware which I would like to avoid if I can.......
so, Ran into some trouble today trying to trying to do the 3e recovery mod today and had to reinstall stock firmware (using odin and gtg). Got root access and and was up and running. I went to updates just to see if anything was there and a update started and completed. the phone rebooted and was on the white and red update screen for about 4 secs and the phone rebooted again. When Got back to the home screen and got a message saying the update had failed. since then device management will not stop popping up. it stays in the task bar and if you use any process that needs it, it crashes and restarts itself. the message in the taskbar says "connecting to DM server" like its trying to get a update. how can I stop this without resetting the phone?
loulou704 said:
(NOTE TO MOD. PLEASE MOVE THIS POST TO THE INFUSE 4G GEN SECTION. THIS ISSUE MIGHT APPLY REGARDLESS OF THE PHONE BUT MY PHONE IS A INFUSE. THANKS.)
I seen this subject discussed but never really saw a answer, seems like everyone resorted to re installing firmware which I would like to avoid if I can.......
so, Ran into some trouble today trying to trying to do the 3e recovery mod today and had to reinstall stock firmware (using odin and gtg). Got root access and and was up and running. I went to updates just to see if anything was there and a update started and completed. the phone rebooted and was on the white and red update screen for about 4 secs and the phone rebooted again. When Got back to the home screen and got a message saying the update had failed. since then device management will not stop popping up. it stays in the task bar and if you use any process that needs it, it crashes and restarts itself. the message in the taskbar says "connecting to DM server" like its trying to get a update. how can I stop this without resetting the phone?
Click to expand...
Click to collapse
First we don't use Odin. As it is a different device post this in that device section.
Thread closed
Related
I seen this subject discussed but never really saw a answer, seems like everyone resorted to re installing firmware which I would like to avoid if I can.......
so, Ran into some trouble today trying to trying to do the 3e recovery mod today and had to reinstall stock firmware (using odin and gtg). Got root access and was up and running. I went to updates just to see if anything was there and a update started and completed. the phone rebooted and was on the white and red update screen for about 4 secs and the phone rebooted again. When it Got back to the home screen and got a message saying the update had failed. since then device management will not stop popping up. it stays in the task bar and if you use any process that needs it, the failed update screen pops up again and DM crashes and restarts itself. the message in the taskbar says "connecting to DM server" like its trying to get a update. how can I stop this without resetting the phone?
loulou704 said:
I seen this subject discussed but never really saw a answer, seems like everyone resorted to re installing firmware which I would like to avoid if I can.......
so, Ran into some trouble today trying to trying to do the 3e recovery mod today and had to reinstall stock firmware (using odin and gtg). Got root access and was up and running. I went to updates just to see if anything was there and a update started and completed. the phone rebooted and was on the white and red update screen for about 4 secs and the phone rebooted again. When it Got back to the home screen and got a message saying the update had failed. since then device management will not stop popping up. it stays in the task bar and if you use any process that needs it, the failed update screen pops up again and DM crashes and restarts itself. the message in the taskbar says "connecting to DM server" like its trying to get a update. how can I stop this without resetting the phone?
Click to expand...
Click to collapse
it shouldn't be a prob after you flash a new rom on it.
If it really bugs you, you can try freezing it or remove the update manager pak with TiBu
I tried to update my rooted note but it just keeps rebooting. It goes through the set-up with percentage at the bottom, gets to 100% and then reboots like it's going to start. However, instead of starting, it just instead tries to upgrade again. It keeps going through this cycle.
I started it and used Odin to flash initial .tar with root in it and it's doing the same thing.
Please help!!!
grimloktt said:
I tried to update my rooted note but it just keeps rebooting. It goes through the set-up with percentage at the bottom, gets to 100% and then reboots like it's going to start. However, instead of starting, it just instead tries to upgrade again. It keeps going through this cycle.
I started it and used Odin to flash initial .tar with root in it and it's doing the same thing.
Please help!!!
Click to expand...
Click to collapse
Well, my suggestion would be to load up Kies on your computer. Connect the tablet, and see if you can do a firmware repair seeing as how you seemingly already tried to ODIN in another rom. Maybe you can try to boot into CWM and wipe the cache, dalvik, and factory reset, but I'm not so sure that will do anything for you.
OK. Used the update/tar from this file. Got me up and running but then gave me a message that update failed to install. I did, however, lose root rights.
http://forum.xda-developers.com/showthread.php?t=1847706&page=2
As risky as I am, I checked software update and found another update--this time smaller in size. Downloaded and installing...Wish me luck.
OK, That's appearing to work! Machine is rebooting and is again "optimizing applications."
yeah, the recent update came in 2 flavors. stock to LI3 which was 75 and LH2 to LI3 which was 40mb.
Glad to hear you got it up and running!
Hello, tried finding a thread with the same issue but was not able to.
I did my first flash to a custom and the ROM flash went without any issues.
(TrickDroid for the S4 ROM)
Installation went fine, phone started up and I started setting up the accounts and WiFi.
Then when those steps were done the "update is available" screen came up.
There I have to choose data connection, WiFi only or any connection with the OK button at the bottom.
Well nothing happens when clicking the OK button and same result choosing either of the two choices.
Update available screen is the first thing I see after each reboot.
Done this update a few times before when phone has been reset due to updates and then it has worked just fine.
Any ideas?
Thanks.
EDIT: I reinstalled Trickdroid and removed my simcard before booting.. That way I got past the system update screen and am now able to use the phone.
Also disabled auto update and hopefully will not get stuck at that screen again.
I rooted my device using king root, in that state i got the notification for an official update. I went to settings, about phone, and updated. after it rebooted, it started installing the update. halfway through the the status bar was a little less half full, it stopped and booted normally. It said the the update installation was unsuccessful. I remembered that i had the stupid kingroot, so i uninstalled it, it rebooted, everything so far so good. i went just to double check the OS version currently installed, still on 5.0.2 Lollipop. This time i went ahead and started installing the update. I noticed that this time it looked fine because the status bar didn't stop halfway through like last time. It kept going until it was more than half full. So I was like "ok, lets just leave it for now to do its job and ill look at it later" Later, I looked and it had a black screen with the android model with an exclamation mark. It said: "No Command" I decided not to **** with it, so i jut left it. I went to Motorola's website, and chatted with one of their technicians. She told me to factory reset it. She gave me instructions on how to do that, Which those instructions did not work. I went on YouTube and figured out a way on how to get into recovery mode and factory reset it, and that was what i did of course. Now all it does is boot, show me android model, power off. Then it keeps doing the same thing over and over until the battery dies, or i force to shut down from recovery mode. BTW i still can access recovery mode, and everything is useless and leads to boot-loop thing i just mentioned. Please help i feel like i really ****ed it up.
XDA Visitor said:
I rooted my device using king root, in that state i got the notification for an official update. I went to settings, about phone, and updated. after it rebooted, it started installing the update. halfway through the the status bar was a little less half full, it stopped and booted normally. It said the the update installation was unsuccessful. I remembered that i had the stupid kingroot, so i uninstalled it, it rebooted, everything so far so good. i went just to double check the OS version currently installed, still on 5.0.2 Lollipop. This time i went ahead and started installing the update. I noticed that this time it looked fine because the status bar didn't stop halfway through like last time. It kept going until it was more than half full. So I was like "ok, lets just leave it for now to do its job and ill look at it later" Later, I looked and it had a black screen with the android model with an exclamation mark. It said: "No Command" I decided not to **** with it, so i jut left it. I went to Motorola's website, and chatted with one of their technicians. She told me to factory reset it. She gave me instructions on how to do that, Which those instructions did not work. I went on YouTube and figured out a way on how to get into recovery mode and factory reset it, and that was what i did of course. Now all it does is boot, show me android model, power off. Then it keeps doing the same thing over and over until the battery dies, or i force to shut down from recovery mode. BTW i still can access recovery mode, and everything is useless and leads to boot-loop thing i just mentioned. Please help i feel like i really ****ed it up.
Click to expand...
Click to collapse
Hello,
I'd recommend you to restore your device back to stock firmware Restore to Stock][XT1068][All Dual Sim Model][4.4.4] with fastboot.
Also, I would advice you not to flash bootloader again. (Since if yours is updated with marshmallow one, flashing the older one (downgrading) might end in a brick).
-Vatsal
last step fail
Vatsal said:
Hello,
I'd recommend you to restore your device back to stock firmware Restore to Stock][XT1068][All Dual Sim Model][4.4.4] with fastboot.
Also, I would advice you not to flash bootloader again. (Since if yours is updated with marshmallow one, flashing the older one (downgrading) might end in a brick).
-Vatsal
Click to expand...
Click to collapse
at the last step, it fails to verify the package and aborts package installation. what now?
waseem98 said:
at the last step, it fails to verify the package and aborts package installation. what now?
Click to expand...
Click to collapse
Hello,
You may try posting your query in the thread I linked above with all relevant logs, the experts there maybe able to assist you.
-Vatsal
Hello everyone, I have lots of issues with this tablet since I bought it. It works painfully slow, yet resetting it doesn't change anything, still the same problem. I also tried to root it via Kingroot and it werk, however it took me lot of time due to the system being unresponsive / unstable and almost useless. It comes with android 4.0.3 and I also tried looking up for any possibilites to reinstall the firmware since I'm extremely sure it could be caused from the firmware it also got installed from the factory. I also tried searching for custom roms and other ways around for TWRP or any custom recovery, but no result. I also tried up with the Flashify app to try extracting / backing up / dumping the recovery and the kernel but the app freezes up. I also tried a possibility to update the firmware from their official page, hence it failed to do so since it gives an error in their flashing software that dosen't tell me nor it logs it what it could be caused up from the connecting part.
primux.es/producto/tablets/tablet-primux-siroco-2-101/189
(not sure if anyone understands spanish thought but I can translate if needed)
This is the page from where I tried to download and install their software and their firmware down below on the page. primuxcomputers.es/primux/siroco2upgrade.pdf
There are the instructions where I tried to follow but at the "Imagen 9: Icono" part got me stuck in there. It requests me to insert the cable in the tablet holding the "Home" button and while holding it, plugging in the USB cable throught PC, and tap quickly the "Power" button 3 times. However it gives me a red X icon and yet nothing shows up in the devices: No ID, no other kind of detection no logs no nothing. After it showed up the X on the status, it disconnects itself and it changes to ready / green icon and plugs itself in again but nothing really happens to detect it again thought.
I also tried to boot in recovery mode but nothing happens menawhile Flashify keeps on the rebooting in recovery mode in loop doing nothing else... I'm seriously in pain with this tablet. And if you ask me to return it, not gonna even bother doing that..
I seriously hope any answer very soon and don't get dissapointed by the ignorance of this topic..