Related
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Try finding the cab "sdkcerts.cab" to disable certificate checks and try it else reflash the rom once again and try.
fyi, the rom you're flashing is a WM6.0 build and NOT wm6.1
Fix?
Had the same issue, but it was related to a file that was removed from the windows directory search the ROM thread I think the file was something like olce?.dll to confirm its the same issue try installing isilo and see if the same error happens.
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
No, he’s just confused between WM 6.0 and WM 6.1 it did take me a while to realize I am not superman too.
WizP said:
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
Click to expand...
Click to collapse
firestormer said:
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Click to expand...
Click to collapse
Hi,
Just remove sddaemon.lnk from windows/startup folder.
(when in doubt, just paste this file elsewhere)
greetings,
Wout
I am getting the same thing. None of these "fixes" has any effect whatever. I thought this was a thread full of knowledgeable persons. Why all the stab-in-the-dark answers? Doesn't anybody know what REALLY causes this trouble?
(99% DISCONTINUED)
See MotoIncred/MotoFroyoSense for new versions
MotoSense, an adaption of the HTC 2.1 SenseUI(version 1.6) from HTC Desire
Image is only compatible with this a milestone A853 , and cannot be installed on other variants of "Milestone" XT720/A854/A855 branded models (yet).
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod.
LATEST RELOAD PATCH for MotoSense MotoSense v0.51 patch
Old releases :
LATEST FULL MotoSense DOWNLOAD MotoSenseV05
MotoSenseV03
a image folder goes into /nandroid/adbrecovery on your SDCARD its required to have OpenRecovery on your phone to install this image.[/COLOR]LATEST PATCH FOR DOWNLOAD
MotoSense v0.51 patch (see top of post)
WIPE YOUR PHONE BEFORE ANY FULL IMAGE IS INSTALLED! (Recovery menu - factory reset)
If you don't you might get constant reboots with the M logo
INSTALLATION:
Use G.O.T Recovery / Open Recovery to install this rom.
Currently require you to install a 2.36 stock rom, before you install this one.
Radio Band Requirements for different countries
Some countries require the original 3G files of your current ROM to work ie.
Canada, Brazil, Venezuela, Germany and some others countries uses a different band for 3G. If u dont backup the 4 original 3G Files and restore it over this nandroid once installed u gonna have poor signal, sms problems and HSDPA loss (even if u set apn and get conection its gonna be crappy one).
Files should be in the /system/etc/motorola/bp_nvm_default/ of your phone.
This can be done using OpenRecovery and a adb shell.
You might check this thread , if a update-nosign.zip file exists for your model. which makes it easier for you to install.
Filenames are:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
STATUS of the functionality in image
WorkingRadio (Calls,GPRS,HSPA)
USB
Milestone bootup AC charging
Wireless
Bluetooth (limited but works, only with a few functions)Not Working- PINCODE (will not be able to enter any pincode or boot normal)
Changelog history
v0.51 1-november-2010
- Finally beat the reload issue with SenseUI, it should work alot better now
v0.5 12 august 2010
- Corrected WorldClock bottom slider icons
- update HTC Camera to support more resolutions and moto recording.
- Changed Motorola VideoCamera & VideoRecorder to work with HTC framework for optimal use of Moto Camera.
Changed Moto Gallery for proper playback of your recordings.
- SDCard is now always "on", so you will notice status is "0 bytes" when you connect to pc. No conflict with wifi anymore.
- Apps2SD support, EXT2 supported.
Use G.O.T recovery or other application to partition your SDCARD Partition no. 2 should be EXT2 formatted
(G.O.T will do this automatically)
- Apps2SD remaining space can be seen in settings -> SD & Phone storage. Look under "Internal Phone storage" which is your EXT2 partition.
- optimized internal storage space. Most apps are now in /system. leaving your with 171MB free internal storage on your milestone.
- WIPE is 100% supported but you loose the following apps, if you do.
(Dock , GreekIME , Maps , MotoCarDock , PersonalPortal , VSuiteApp , QuickOffice , teeter )NOT SOLVED
- Reloading of Rosie (HTC Launcer)
Reason for not fixing it is that Motorola Milestone simply do not have enough memory for HTC SenseUI to run stable with only 256MB.
the launcher is very memory hungry for all its plugins and graphics.. so sorry, no fix, unless you add 256MB more memory to your phone.
- Bluetooth headset
v0.42 29 july 2010 (MotoSensev042-update-nosign.zip - attached to this post at the bottom) (type: nosign-update.zip)
build.prop correction (hopefully solves too many sense restarts)Keyboard light enabledHTC Camera fix (5M pixel)
OLD REVISION DATA DELETED, OBSOLETE and not worth writing anymore
WARNING: Use this image at your own risk and i take no responsibility if
you brick your phone.. Image has been tested on a UK milestone and works fine if all files in ADB recovery image is used.
woah, nice work buddy. just got a question, if i apply this rom to my North American Milestone, do i lose the ability to access 3g/hspa network from rogers?
is gps working
i got one guy on IRC from Canada(im from europe, so im not sure on networks you got overthere), he tried it, and it works fine for him
You should try to only flash the system+data image of it, as the cust.img contains telephone info, which might be what you need to keep.
GPS is not working atm..
im new to the motodroids , will this work on the motorola droid or just the milestone ? ive had the droid eris so im not sure if there is a difference between the droid and milestone, sorry for the dumb question,
tazzpatriot said:
im new to the motodroids , will this work on the motorola droid or just the milestone ? ive had the droid eris so im not sure if there is a difference between the droid and milestone, sorry for the dumb question,
Click to expand...
Click to collapse
there is already a senseui for Droid, look for Zeusdroid they made that image.
Dexter_nlb said:
there is already a senseui for Droid, look for Zeusdroid they made that image.
Click to expand...
Click to collapse
ok ill google it to see if i can find it , it is much easier to find eris roms , ive only had this moto droid for to dayz and im lost lol
edit well i found it but it doesnt look like its very functional , if its the one i found
tazzpatriot said:
edit well i found it but it doesnt look like its very functional , if its the one i found
Click to expand...
Click to collapse
Porting is no easy task, when its not about development, and zeusdroid actually do have some customized wireless driver.
But i managed to use the existings drivers from Milestone..
And im probably not going to do programming to make the port perfect, as that not so easy, although i got some experience.. but none within driver programming.
im really happy with the progress dext3r, this is awesome.
just curious, any ETA for GPS fix?
gemini002 said:
is gps working
Click to expand...
Click to collapse
ive just tried to fix this, and GPS will be working in the next release.
as it works now
Dexter_nlb said:
Porting is no easy task, when its not about development, and zeusdroid actually do have some customized wireless driver.
But i managed to use the existings drivers from Milestone..
And im probably not going to do programming to make the port perfect, as that not so easy, although i got some experience.. but none within driver programming.
Click to expand...
Click to collapse
i know , ive ported some roms for the eris , i understand its not easy to make it all work, trust me im not disrespecting any1
crap need gps gunna wait until next update fak really miss sense ui
if i install this rom what happend to my apps also i have app2sd applied is this gunna be a problem???
Dexter_nlb said:
ive just tried to fix this, and GPS will be working in the next release.
as it works now
Click to expand...
Click to collapse
awesome pls release this on the weekend would love to try it out also if this is htc sense ui does it have flash lite and if it does have flash lite would the 10.1 flash that works for 2.1 roms work with this...
SplitSnake said:
im really happy with the progress dext3r, this is awesome.
just curious, any ETA for GPS fix?
Click to expand...
Click to collapse
if you know your way on a few linux commands,
then you're welcome to make it work yourself.
1 . copy the /system/lib/libgps.so from the original milestone 2.36.0 image.
2. flash motosense image.
3. mount /system
and copy libgps.so into the flashed image into /system/lib
and GPS works after a reboot.. So fixed!
of course all done from adb shell.
gemini002 said:
awesome pls release this on the weekend would love to try it out also if this is htc sense ui does it have flash lite and if it does have flash lite would the 10.1 flash that works for 2.1 roms work with this...
Click to expand...
Click to collapse
10.1 for 2.1 senseui roms are not real, it just looks like 10.1,
but the flashlite already reports that number.
and yes, flashlite works fine. tested on a few flash websites.
I have a Telus Milestone and I will consider trying this ROM at some point.
Just to crosspost from the other thread... in another thread I was told the following. Could be useful for keeping 3G.
DAGr8 said:
cmstlist , there is an easy way to retain your baseband just flash the HK sbf , then , copy paste these files and make sure you set the permissions correctly .
Probably safest to do via adb if you dont make sure you reboot ...
for the 3G baseband Hack/Swistch it 5 files from /system/etc/motorola/bp_nvm_default
File_Audio , File_Audio2 , File_GSM , File_Seem_Flex_Tables , generic_pds_init
Click to expand...
Click to collapse
So perhaps if you want to try Motosense on your Telus Milestone, then you should backup these 5 files (and take note of the permissions) before flashing the nandroid image. Then afterwards if 3G doesn't work on the Motosense image, restore the same 5 files.
Ok I wasn't able to flash only certain parts of the nandroid backup so what I did was make 1) a full nandroid backup of the Thai firmware (leaked from GOT) on my Telus Milestone unlocked for Fido, 2) a partial nandroid backup using the options --backup --nodata --nocache --nosystem
Then 3) I flashed all of the motosense backup. Trying a first boot. Will report on whether my NAM 3G is gone.
All I get after the M boot logo is a black screen, followed by a force close notification for system. Nothing else comes up. Long-press Home and I get no recent applications. Oh wait - spoke to soon! Wow, just got the HTC lock screen. Unlocked and now I have the setup screen. Asks me to insert SIM to place calls as if I don't have one inserted. My only option seems to be to press "Skip". Okay, home screen loading up now after the tutorial.
So yeah it's not seeing any phone service and I get "Unable to start Wi-Fi". I'm going to try a second reboot. This time the Droid eye shows up promptly (BTW this is very odd to see because Milestones don't usually have that animation). The phone boots up considerably faster than on the Motorlola firmware. *This* time, I do see cell service. In fact I just got a text message. Wait it just dropped again.
Trying to search for network operators. None showing. Strange! It does see wifi though this time. As the OP implied, DHCP not coming through. Meanwhile my Fido service just came back... VERY weak. Dropped again. Normally both EDGE and 3G are quite strong at my apartment so it's odd. Is it possible this ROM has weaker RF somehow?
Ok trying to set up the APN. Noticing the keyboard doesn't light up. APN set up but still no service. Reboot #3: Yes, wifi works now. Mobile network still very weak. Briefly connected to mobile data and it was EDGE. Test phone call fades in and out. Maps manages to wifi-geolocate me.
Alright, so I'm obviously having connectivity problems and only getting 2G. Let's try flashing back the partial I took from the Thai firmware. To be continued next post.
Okay! Flashed back my partial backup from Thai 2.1. Rebooting. Droid eye comes up, glares at me a couple times, back to the homescreen. Connects to Fido. Disconnects, connects again. I am still connected via EDGE, not UMTS. I try going to *#*#4636#*#* and selecting WCDMA only - no dice.
Alright well this has been fun. But obviously I need my phone service to work so this ROM is not for me. Despite having dutifully pasted the info up above about the 5 files to backup... I neglected to do so. So it's back to the full nandroid of my Thai firmware. But one thing for sure, Sense is very pretty!
Before doing this, I made one attempt to install Superuser.apk using the app installer, and then to install Root Explorer. Root Explorer was unable to get root. Maybe if I installed Superuser via OpenRecovery it'd be happier.
Okay back to normal. Goodbye for now Sense!
Backup restored successfully. I used Root Explorer to back up the 5 files in question to SD. Then I restored MotoSense one more time, and before even booting it up the first time I applied root from OpenRecovery. This time it booted much faster. (Is there any way the stock ROM can be hacked to boot this fast? Wow.)
Again, wifi fails to start on boot #1; succeeds but no DHCP on boot #2; works on boot #3. Signed into my Google account and installed Root Explorer (previously purchased). This time Superuser pops up like it should and we're in. I entered Airplane mode. I pasted in the 5 backed up files from the Thai firmware to /system/etc/motorola/bp_nvm_default after mounting read/write. Then I made sure to fix the permissions. Rebooted without exiting airplane mode.
After reboot I disabled airplane mode. Hey, FULL SIGNAL BARS! I did it. But now it's telling me unable to start wi-fi. Let me add in the APN next. Done.
YES! The little H pops up. I'm getting 3G data! But as soon as the icon pops up, it drops out again. In any case I know I'm connected to UMTS because my cell tower ID in Maps > More > About is 1957869 which is my local UMTS tower. Test phone call is *much* clearer and signal isn't dropping anymore. One more reboot.
On the next reboot, wifi is back. Upon disabling it, the lovely "H" shows up and then flits down to "3G". Testing in browser... hmm nope. Something still missing, don't know what. One more reboot, trying again. Internet works on wifi, but not on HSPA (even though the 3G/H icon comes up).
Sanity check: Dialed *#*#4636#*#*, Phone information. Run ping test.
Ping IpAddr: Fail: IP addr unreachable
Ping Hostname (www.google.com): Fail: Host unreachable
One more sanity check: Switched to GSM only, verified in Maps>About that it's connected to a 2G cell ID (57322). Full signal bars, good call quality. So swapping the files improved both 2G and 3G voice performance.
Since I had a bit more success with this approach, I'm saving a backup for future reference, and on my rare moments of idle time I'll play with it again. But back to stock for now.
Hey guys,
I just downloaded the following Android Build for my HTC Diamond 2 (Topaz):
Package date: March 25th 2011
Build Froyo 2.2.2
Bundle package FRX06 Final NEW:
With the first boot it seems to have gotten stuck at a particular point in the run. I'm gonna try to retype the info on the screen and if anyone can give me an idea of how to fix this problem...
Thank you
(There is more than this, but seems to be of a repetetive sort. Please let me know if there)
INFO: task rpcprouter: 15 blocked for more than 120 seconds
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message
mdp irg already on 4 4
mdp_mda: busy
Hello!
I have the same problem with the release March 25th 2011 2.2.2 FRX06 Final bundle from http://forum.xda-developers.com/showthread.php?t=509493 on a HTC Topaz.
I have tried several kernels from glemsom and formatted my SD with Panasonic SD Format 2.0 to no avail.
Edit:
Fixed - I downloaded a ts-calibration file for Topaz from http://forum.xda-developers.com/showthread.php?t=951962 and now that error dissapeared and I can reach the "Insert PIN panel".
Edit 2:
The "ts-calibration" from the above thread behaves in mirror-like fashion.In portrait mode when I touch the left side it clicks on the right side.I made a custom ts-calibration using data from SPL.
http://forum.xda-developers.com/showpost.php?p=10807361&postcount=515
http://forum.xda-developers.com/showpost.php?p=10817104&postcount=529
Thanks for the reply edward-andrew,
It's been a while since I posted this topic and haven't really tried fixing the problem yet. Also I'm very new to development and OS installations on cell phones. Was wondering if I could get the ts-calibration file from you and if you could inform me how to go about fixing the problem...
Also, since that first run whenever I've tried to run haret I get an error...
'The file 'HARET' cannot be opened. Either it is not signed with a trusted...'
I have deleted all the files from that build from the memory card and recopied it onto the memory card, but still get the same message. Is there some log file on the phone I have to edit?
Thank you
Hi,
Yesterday I flashed a custom ROM , the rom somehow messed up my IMEI number.
Then i went back to the forum and found out that everyone who flashed the rom got his IMEI messed up and we all got the same IMEI now, i still have calls working but im afraid they will stop working soon, i know what was my original IMEI, can anyone help us please. (Heres the rom i flashed: http://forum.xda-developers.com/showthread.php?t=1034130)
I saw that the devs on samsung captivate managed to restore their imeis, there should be a way to do that to the nexus s.
This is how they restore the imei on the captivate: http://forum.xda-developers.com/showthread.php?t=881162 , i read it and a guy said that his imei became: 004999010640000 , same as us!
After i thought about it and about the nv log that says:
Code:
Thu May 26 13:20:25 2011: No NV backup found. Create one before MD5 on.
Thu May 26 13:20:25 2011: NV data back-up begin.
Thu May 26 13:20:25 2011: nv_data.bin does not exist.
Thu May 26 13:20:25 2011: NV data backup stopped due to NV data size.
Thu May 26 13:20:25 2011: MD5 is turned on.
Thu May 26 13:20:25 2011: nv_data.bin does not exist.
Thu May 26 13:20:25 2011: [B][U]default NV restored[/U][/B].
I think that the default IMEI for all the devices of the galaxy S series is : 004999010640000, Thats why we all got it!
Well there has been no response from the developer as yet, and i have also lost all hope.
And i dont think anybody else will be helping us out.
The reason no One is responding is cuz this is the WRONG SUB FORUM. Please post in Q & A.
Sent from a bird cage, with a swing!
Babydoll25 said:
The reason no One is responding is cuz this is the WRONG SUB FORUM. Please post in Q & A.
Sent from a bird cage, with a swing!
Click to expand...
Click to collapse
ok, if so : someone close the thread.
New thread: http://forum.xda-developers.com/showthread.php?t=1098963
Hello friends.
This is intended to be a thread providing up-to-date versions of ZTE ROMs, mainly for the very unsupported (so far) ZTE V71A and ZTE V11A, but if you have other requests for ZTE roms, please ask and I'll see if I can provide.
--- VDF_IT_V11AV2.0.0B02.zip (466.13 MB) http://www.multiupload.nl/E709JNIJ2H
--- FWUpgrade_Pad_CDMA_V55.zip (215.24 KB) http://www.multiupload.nl/NP6EWS6K3B
--- SPT_AM_V55V1.3.0B09.zip (193.05 MB) http://www.multiupload.nl/YTMKD922CU - NEW v55 ROM
--------------------------------------
The above files are most probably all down, and I can no longer locate new versions for them.
I can, however quote:
dclou said:
Hello All:
The phone company in Taiwan(TWN GSM) has just released the offical 4.0.4 rom zte V71A
(Taiwan mobile mypad p4 is the OEM of ZTE V71A)
http://service.taiwanmobile.com/csonline/cellphone/download.html
Just Connect to the above hyperlink and press "P4 Android 4.04 升級檔 "
Then you can download it and upgrade to 4.0.4.
Please help to update this ROM to the first page of this thread...^^
Click to expand...
Click to collapse
I'm sorry friends. I've lost access to the ZTE servers from where I procured new roms for devices.
Unless I find a different source, I can't provide any updates.
Until further notice this thread may be considered dead.
Thanks man, soo is this older or newer? http://kepfeltoltes.hu/120218/tmp_-2133757290_www.kepfeltoltes.hu_.png
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
sangemaru said:
1.2.0B09 released in february 2012 vs 1.0S released in july 2011
Leave me your e-mail adress by pm if you want the file, but be advised that we still don't have a flashing utility to install it with, me and mobilx are still trying to figure out how we can get this software on our devices.
Click to expand...
Click to collapse
That would be good. did you get my pm?
Zte score roms?
Sent from my X500 using xda premium
Okay, so here is a pdf for the huaweii media pad 7, of the flashing process and the unlmt.cfg needed is 0byte also , it is supposed to be the same process, dont use the files from here, its not for v71a or v11a!
http://www.huaweidevice.com/tcpsdownload/downLoadCenter?category=&flay=software&downloadID=NDM5NzQ=
brd912, couldn't you have just said X500 in the first place? I'll look, if I find anything I'll let you know.
zsolti, so far I've had no success with using the huawei procedure to flash our tabs, and mobilx hasn't been online today so I haven't got a clue from him about this.
The bad news is, as confirmed earlier by mobilx, the builds are IDENTICAL to what we currently have on our devices. Not encouraging at all (Verified by comparing build.prop). And we don't even know how to flash them yet...
I'm attempting to obtain a carrier unlocked nandroid backup right now, to see if it's locked at a component firmware level or at software level. Maybe we'll see some good news on that front.
Hello there,
This guide in english explains a lot. So this unlmt.cfg file actually serves as a trigger to automatik or manual update.
That means
if it is present update will start on PWR off PWR on
if it is NOT present than you need to go to the FTM mode VOL+ & PWR and update process will start
dload folder must be on ext-sd card.
Again leaked FWs for V11a are the same as ones on our devices
Sangemaru can confirm if his internal FW name on 7 inch matches with the leaked ones.
Go to yours build.prop file and check ro.build.sw_internal_version=VDF_RS_V11AV1.0.0B03 example of mine device
VDF - network - vodafone
RS - country - serbia
V11A - model - 10 inch
V1.0.0 FW version - very first
B03 - localisation ( APNs, keyboards etc) Serbian network APNs and Cyrillic keyboard
Yea, I read it.
At least for my tablet, it didn't apply. Update would not trigger, either on reboot or ftm mode, with neither UPDATA.zip or update.zip names, with the file or not, with fresh sd card format or not, development mode or not, etc.
I'm assuming it worked on your V11A, so somebody should attempt it on their own V71A's if possible. I may have messed something up, or simply have an unsupported sd card.
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
I'm assuming one thing will happen: nothing.
hei, did any of you has dialer app, it seems vodafone had removed this one
p.s. am on july rom
if there is one can some one post it
tanks
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Hi all !!!!!
I'm Italian .......
My device specs :
M8660A-AABQNLYM-3.1.32T 1 Jul 23 2011 22:00:00
Kernel version :
2.6.35.11-perf.
[email protected]#2
Build Number :
SmartTab10-MSM8260-V02d-Dec022011-Vodafone-IT
huawei media tab
sangemaru said:
Honeycomb, friend. Honeycomb has telephony support removed. If you want phone service look into a VoIP service.
Click to expand...
Click to collapse
did notice that huawei media pad has a dialer app, however did not succed to start it.
I'm saying that in greate proportion the two tablets are just the same.
no luck
zsolti256 said:
The one in first post for V71a is :
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-ES
ro.build.sw_internal_version=VDF_ES_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-vf-{country}
ro.build.date=Sat Dec 3 02:09:34 CST 2011
Mine is:
ro.build.zte_build_number=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.software_version=SmartTab7-MSM8260-V02d-Dec022011-Vodafone-HU
ro.build.sw_internal_version=VDF_HU_V71AV1.2.0B09
ro.com.google.clientidbase.ms=android-hms-vf-{country}
ro.com.google.clientidbase.am=android-zte
ro.build.date=Sat Dec 3 03:44:43 CST 2011
.
Anyone know what will happen if we flash a firmware from another carrier, like in my case? Because the network id isnt the same for hungary it is 21670, for spain its different...
Click to expand...
Click to collapse
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
caveman_78 said:
Hi majaelix,
Tried all proceudres described in this post with no luck updating firmware, I have a Vodafone Spain V71a with 1.0 software version.
Tired to create several folders in sd-ext and puting inside the update.zip and the .cfg file with no success
Tried to sign the zip with Signapk utility but when I try to update it from Recovery, it says: "signature check failed", I think one of the files nneded to sign a zip file is related to the recovery, so I don't know how to generate it.
Also tried to root it with fastboot boot superboot.img but my fastboot can't detect the device form pc, I'vhe checked if drivers are installed in device administration and all seems to be ok.
Did you make any advance on this issue, I'm looking forward.
Click to expand...
Click to collapse
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
good news
zsolti256 said:
No, but Please standby, a fellow Hungarian 10" user is probably going to make some kind of update we have obtained a build that is even newer, it is the following:
SmartTab7-MSM8260-V03a-Jan182012-Vodafone-HU
Click to expand...
Click to collapse
Wow, those are good news. I can't wait for the update. maybe after, we can try to make some weird ICS port.
Please, keep us informed...
Thanks...
i have some problem
hello i have a V71A and i wanna take back the stock rom beacuse i formated system... and a CWM is buggy and usb mass storage is doesn't work and my pc don't see the tablet just CD-rom and not more "adb devices -list of devices atthaced (and nothing)" pls help (sorry for my english)
Uninstall and reinstall usb drivers. Your problem is a driver issue. And how exactly did you format the system?