Database Info

[ODIN][5-30-11][Mesmerize] Froyo EE19 stock update

This is the EE19 Froyo update package for the Mesmerize. This build replaces any build dated prior or not dated in the name. It is also only for the Mesmerize. I am not responsible for what happens if you flash it to other phones.
This is just an update package, just like what you would get from the USCC home page. I have just pulled it out of Kies build form and turned it into an Odin build for our convenience. What this means, is that you will likely not lose anything that you have downloaded from the market if you just flash the package. What you must understand, is that there may be differences in the packages themselves. If you flash and experience FC's (force closes) on packages after the flash when you first boot up, then you will need to do a wipe data/factory reset and probably flash again.
To use these files: unzip and then flash in Odin using the directions below.
#####IF YOU HAVE VOODOO ENABLED, DISABLE LAGFIX BEFORE YOU USE ODIN#####
1. Pull your phone battery
2. Start Odin
3. Click PIT and select the .pit file from the download
4. Check the PDA box, Click PDA and select the .tar.md5 file from the download
5. Plug your phone into the USB port and hold volume down
-your phone should go into download mode
6.Verify that Odin sees your phone.
-if not, try another USB port
7. Click Start
It will look similar to this. -- and when i say similar, I mean 'not exactly like'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mesmerize EE19 stock update
OK. New upload that has been verified good downloaded and md5 checksum is checking out now.
Stock means not rooted. If you want to root this build, SOC should still do the trick. I will have a PnP for it soon.

Do we know what all has changed/been updated? I looked on the uscc page but no info was there. As always thanks for your work . It is always appreciated
Tap-a-Talked

scarmon25 said:
Do we know what all has changed/been updated? I looked on the uscc page but no info was there. As always thanks for your work . It is always appreciated
Tap-a-Talked
Click to expand...
Click to collapse
Yeah, this is another of my source leaks. I sometimes get them before the company does. This won't be released for a little bit on the website, but it is coming.
As far as what is different, there are bug fixes that may or may not affect everyone. From what I have read, the main fix is a missed call bug that was actually present back in 2.1 and carried over into 2.2 that was finally found and fixed. As for anything else, I'm just getting into it, so we'll see what it has to offer.

Ah you the man. One last question. If we odin this does it wipe the phone. For example in on heinz and themes and such. Will this on undo all that or will this just update what's already on the phone.
Tap-a-Talked

scarmon25 said:
Ah you the man. One last question. If we odin this does it wipe the phone. For example in on heinz and themes and such. Will this on undo all that or will this just update what's already on the phone.
Tap-a-Talked
Click to expand...
Click to collapse
I assume we'll have to create new theme's and rom's from this build so if you don't want stock you'll have to wait until things roll out.

bdemartino said:
I assume we'll have to create new theme's and rom's from this build so if you don't want stock you'll have to wait until things roll out.
Click to expand...
Click to collapse
its gonna be fun on a bun!!!! as soon as hes got the PnP released for this ill get themes ported to it...will also have no clock mod, puzzle mod, and ill see if i can get puzzle answer without tsm parts but i dont know how well that will work

That's cool with me. No hurry I've been happy with this setup since I got it and don't mind waiting till things get rolling. You guys rock
Tap-a-Talked

Big thanks for this! The missed calls were a pain!
On first try I got a MD5 hash value is invalid error.
so got some info on the error code and got it to go by deleting the md5 in the file name and just leaving it as .tar

after deleting the md5 it converts it to a winrar file and when trying to use odin on it, it does nothing. any ideas?

ok, so after it converted to the winrar file renaming it once again with the .md5 at the end did the trick. go figure.

Kick ass. I'll try this tomorrow since I'm out of town right now. Hope this solves my missed calls/texts issue.
Sent from my SCH-I500 using XDA App

I can't get the .md5 to rename to a usable .tar file. Help!!

Did the fascinate suffer from this bug?
If we are using a VZW rom/radio, would the bug still affecT me? ...i suppose the amazing builders that make this device worth owning will be hard at work on framework updates? Thanx for the package!
Sent from my SCH-I500 using XDA Premium App

From what I can tell on ec01 I missed even more calls then when on ec10
Sent from my SCH-I500 using XDA App

stephenj37826 said:
From what I can tell on ec01 I missed even more calls then when on ec10
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Then I bet vzw had their own update coming soon
but this tells me that all their programmers aren't working on GB yet!
As usual the biggest obstacle to the progress of cm7 is samsung! Gah ...hopefully these bugs were fixed finally! I've missed at least a few importanto calls
Sent from my SCH-I500 using XDA Premium App

Tortuga1234 said:
Big thanks for this! The missed calls were a pain!
On first try I got a MD5 hash value is invalid error.
so got some info on the error code and got it to go by deleting the md5 in the file name and just leaving it as .tar
Click to expand...
Click to collapse
MD5 is a checksum process to make sure you're not flashing a corrupted file, by removing that from the name you're also removing the md5 check, I don't think that's a good idea even tho it may still work. I haven't tried this yet so I'm not sure but sounds like a corrupted download would be the cause.

Oh, Thanks for the heads up!
Flashed, rooted, and got OTB on it before bed and it has been running very smooth ever since.
Sent from my SCH-I500

So this radio is the most recent radio for the Mesmerize correct? And I can Odin this to my rooted phone with the Heinz rom?

I am running stock Rom but using Voodoo kernel and voodoo lagfix. Can I just disable lagfix and then flash this in Odin?
Sorry for my ignorance, just wasn't sure if I need to revert everything back to stock before flashing this.
Thanks!

Thank you, I will be following this one. My only complaint with this phone has been missed calls. I am also interested in how this will work with Heinz 57 ROM.

[THEME] [ZipThemer] [any GB rom] chargRED by Manigma77

chargRED​
I would like to start off by giving credit to all the great themers that I have probably borrowed images from.
In No particular order, TheBowers, bgill55, Mobile_Sensei, NatemZ, and I'm sure theres more.
DISCLAMER
This theme is in no way complete and I can not give any ETA's as when it will be or if it ever will be because of my busy schedule with life and work, but I will try if there is enough interest. FYI, I am fully aware that the dialer and contacts needs some work, Please enjoy the rest.
LockScreen
You will only get the aosp locksreen if you install a rom with it included such as GummyGB. You also need to check glass lock in display settings to get the aosp dialer lock slider to answer calls.
Install Instructions
This is a Metamorph theme, but I recommend using ZipThemer from the market to apply it.
Just move the zip to your sdcard/zipthemer folder then open Zipthemer
You will have to update ZipThemer to work with Edify Scripting (heres how to do it)
Select Menu then Update Edify from within ZipThemer, then select BROWSE and choose any zip off your sd card that is known to work with edify scripting, then select CONFIGURE. Now, you will be able to continue on to the next steps and ZipThemer will work.
From there select +theme, and choose my zip, then choose *output and name it whatever you like.
Next, select Build it, and choose to make a backup (it will ask you) that way if you don't like it you can easily flash back to what you had before installing.
Finally boot into CWR, and choose the zip you just made and flash then reboot.
I am currently using this on GummyGB v1.8, It should work for "almost" any rom, the good thing is if it doesn't look how you expected all you have to do is boot back into CWR and flash the Undo file you made in ZipThemer and your good to go.
I don't think ZipThemer has been given enough credit, but it allows you to try this theme on any rom and flash back using the undo feature without any negative effects. For Ex. When I was building this I caused my phone to bootloop, I just flashed the undo zip and I was back up and running.
If you do try this on another rom and you are not happy with the results, you can also go into the zip file you got from here and change the .pngs and .jpgs as you like. (Be carefull Changing .9.pngs unless you know what you are doing) then rerun it though ZipThemer and see If you fixed your problem.
EXTRA NOTES: Because this is a ZipThemer Theme then if your Rom (ex. GummyGB 1.8) gets updated to say, 1.9 then all you have to do is apply the rom update then run ZipThemer again and apply, Then this theme will essentially be ported to the new update.
DOWNLOAD
http://dl.dropbox.com/u/7883290/chargREDv1.zip
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you feel I have helped in some way please feel free to donate by clicking on link below.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=VDUSLGCD24GPS
​

You are awesome I have been waiting for this theme ever since I saw the post on RootzWiki

yutzybrian said:
You are awesome I have been waiting for this theme ever since I saw the post on RootzWiki
Click to expand...
Click to collapse
No problem, I know the install method is a little lengthy but hopefully it will work for more people.

jsminnis said:
No problem, I know the install method is a little lengthy but hopefully it will work for more people.
Click to expand...
Click to collapse
Uhh it doesn't work at all. Zipthemer uses the wrong scripting. I get the message:
Amend scripting (update-script) is no longer supported. Amen scripting was deprecated by Google in Android 1.5. It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages. Installation aborted.
Click to expand...
Click to collapse

Thank you for releasing this and did you ever try this with the humble rom?
Sent from my humble charge.

yutzybrian said:
Uhh it doesn't work at all. Zipthemer uses the wrong scripting. I get the message:
Click to expand...
Click to collapse
Unzip it with root explorer and put all the contents into an edify zip. You can use the one from my steele blue theme. Just extract,delete all my contents and replace it with his...... If you dont know how. Im sure OP can do it........
Sent from my SCH-I510 using XDA App

GrainOsand said:
Unzip it with root explorer and put all the contents into an edify zip. You can use the one from my steele blue theme. Just extract,delete all my contents and replace it with his...... If you dont know how. Im sure OP can do it........
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
I was just about to ask about this thank you very much
Sent from my humble charge.

Actually you just have to open zipthemer press menu then select update edify. From there you choose any zip on your sd that allready uses edify and it will work from then on out.
EDIT: Updated OP to show how to configure ZipThemer to work with your cwr.
Sent from my SCH-I510 using Tapatalk

jsminnis said:
Actually you just have to open zipthemer press menu then select update edify. From there you choose any zip on your sd that allready uses edify and it will work from then on out.
EDIT: Updated OP to show how to configure ZipThemer to work with your cwr.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
Sweet that is much more simple.

This is what i did: downloaded zipthemer, downloaded chargRED, opened zipthemer, pressed menu button, pressed update edify, choose option 2 at bottom by pressing download button, after it says success i pressed back button, menu, settings, then pressed update script format at bottom, then selected edify-fascinate then followed steps of putting chargRED in zipthemer and flashed..all worked perfect thanks
Premium Droid Charge

Outsider2011 said:
This is what i did: downloaded zipthemer, downloaded chargRED, opened zipthemer, pressed menu button, pressed update edify, choose option 2 at bottom by pressing download button, after it says success i pressed back button, menu, settings, then pressed update script format at bottom, then selected edify-fascinate then followed steps of putting chargRED in zipthemer and flashed..all worked perfect thanks
Premium Droid Charge
Click to expand...
Click to collapse
No Problem, I hope you like the fact that if your rom is updated you can still use this theme, all you have to do is flash the rom, then re-run this file through ZipThemer, and essentially you just ported this theme to the new build. I know I mentioned this in the OP but how many people actually read the whole thing,

jsminnis said:
No Problem, I hope you like the fact that if your rom is updated you can still use this theme, all you have to do is flash the rom, then re-run this file through ZipThemer, and essentially you just ported this theme to the new build. I know I mentioned this in the OP but how many people actually read the whole thing,
Click to expand...
Click to collapse
hehe I did! I always read the entire OP on themes and roms so I know what may or may not work

Also I just played around with ZipThemer a bit and if you go to Setings -> Update Script Format and select the Incredible it works with our phones as the Incredible uses the same scripting style. May have to update the phone database first by going to Update Edify -> Download

jsminnis said:
No Problem, I hope you like the fact that if your rom is updated you can still use this theme, all you have to do is flash the rom, then re-run this file through ZipThemer, and essentially you just ported this theme to the new build. I know I mentioned this in the OP but how many people actually read the whole thing,
Click to expand...
Click to collapse
I do lol
Sent from my humble charge.

Will this work on EE4? Humble 1.42

24BlackMamba said:
Will this work on EE4? Humble 1.42
Click to expand...
Click to collapse
Try using Zipthemer and see what it tells you. This theme was designed around GummyCharged GB but Zipthemer compiles based on your system so it might work.

24BlackMamba said:
Will this work on EE4? Humble 1.42
Click to expand...
Click to collapse
Some parts will theme but im not sure if all of them will. The signal icons are now in sytemui.apk in gb, froyo doesnt have the systemui. U are welcome to try, it will not hurt anything and u can always use the undo zip u make to go back exactly like u have it now.
Sent from my SCH-I510 using Tapatalk

Alright cool thanks alot. last question, im currently using another theme can i just flash over it?
jsminnis said:
Some parts will theme but im not sure if all of them will. The signal icons are now in sytemui.apk in gb, froyo doesnt have the systemui. U are welcome to try, it will not hurt anything and u can always use the undo zip u make to go back exactly like u have it now.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse

Yes just flash over, of course there may be a few icons left over from your old theme. If u can figure out what needs ti be changed just unzip the chargredV1.zip and replace and/or add what you need then rezip with 7zip (storage mode) and run it back through zipthemer to see your changes. The undo zip you make will have your old theme on it so u can easily get back to your old theme by flashing the undo zip. Hope that helps and not to confusing.
Sent from my SCH-I510 using Tapatalk

Ubuntu User - Rom help plz

Alright... i keep reading about this KIES deal... since its windows native, i cant install that.
So i need some help...
Im wanting to know how to load a flashing system... and which one...
then wanting to load Infused v1.
Im doing this all from Ubuntu 10.10
__________
Im already rooted, along with the current (stable) BusyBox loaded... so i got that far.
i just wanna know what i gotta do, cause everything seems to rely on this KIES deal, and i dont have that.
I guess im asking for a walk-through... if anyone is willing to help?

re: Ubuntu
Ph0z3 said:
Alright... i keep reading about this KIES deal... since its windows native, i cant install that.
So i need some help...
Im wanting to know how to load a flashing system... and which one...
then wanting to load Infused v1.
Im doing this all from Ubuntu 10.10
__________
Im already rooted, along with the current (stable) BusyBox loaded... so i got that far.
i just wanna know what i gotta do, cause everything seems to rely on this KIES deal, and i dont have that.
I guess im asking for a walk-through... if anyone is willing to help?
Click to expand...
Click to collapse
Kies is not required for what you want to do, but without knowing
if your Ubuntu OS can reconize your phone as an external USB
flash drive device and or if you have a microUSB card reader and a
microUSB memory card in your phone its difficult to tell you the
exact step by step way to flash roms to your phone.
I can help, but I do need to know these things first.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Have a great day,
Enjoy!
Please don't forget to give me a big THANKS if this was worthwhile reading!

Ph0z3 said:
Alright... i keep reading about this KIES deal... since its windows native, i cant install that.
So i need some help...
Im wanting to know how to load a flashing system... and which one...
then wanting to load Infused v1.
Im doing this all from Ubuntu 10.10
__________
Im already rooted, along with the current (stable) BusyBox loaded... so i got that far.
i just wanna know what i gotta do, cause everything seems to rely on this KIES deal, and i dont have that.
I guess im asking for a walk-through... if anyone is willing to help?
Click to expand...
Click to collapse
If you have all that just download the rom zip, place on SD, reboot into recovery, install zip from SD, choose the zip you desire and then select yes and wait .
Sent from my SAMSUNG-SGH-I997R using XDA Premium App

Ph0z3 said:
Alright... i keep reading about this KIES deal... since its windows native, i cant install that.
So i need some help...
Im wanting to know how to load a flashing system... and which one...
then wanting to load Infused v1.
Im doing this all from Ubuntu 10.10
__________
Im already rooted, along with the current (stable) BusyBox loaded... so i got that far.
i just wanna know what i gotta do, cause everything seems to rely on this KIES deal, and i dont have that.
I guess im asking for a walk-through... if anyone is willing to help?
Click to expand...
Click to collapse
first dont ask questions in dev
next kies does nothing but install drivers for the infuse. you.have ubuntu. you.dont need drivers.
what you need is cwm to flash roms and heimdall to return to stock.
google heimdall download. get the frontend package and the backend package and install. you may need to set permissions.as executable.
for.cwm the easiest way is to use heimdall to push a kernel to the.phone. download the comunity kernel. extract the .zip and place the zimage in the kernel slot in heimdall
the phone needs to be in download mode look it up.
alternatively yu can use sgs kernel flasher. get it in android market. that app is self explainatory.
there is another way we used before we had these cool custom kernels but i wont get into that.

re: flashing rom
VtHondaGuy08 said:
If you have all that just download the rom zip, place on SD, reboot into recovery, install zip from SD, choose the zip you desire and then select yes and wait .
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
Click to expand...
Click to collapse
My, the way you explain things so fast, complete and with
such few words....... I never seen anything like it!
For me to explain the same thing you have just now would
take me well over a hundred words for sure
Have a great day,
Enjoy!

VtHondaGuy08 said:
If you have all that just download the rom zip, place on SD, reboot into recovery, install zip from SD, choose the zip you desire and then select yes and wait .
Sent from my SAMSUNG-SGH-I997R using XDA Premium App
Click to expand...
Click to collapse
lol, he never said he has clockwork mod.
op pm me if you have trouble. i run mint 10kde. its basdically identical to ubuntu kde edition. i havent run gnome in a while but i think i can still help.

I've used heimdall on my install of ubuntu and it works fairly well. 1.3.0 should be compatible with 10.10

Misterjunky said:
My, the way you explain things so fast, complete and with
such few words....... I never seen anything like it!
For me to explain the same thing you have just now would
take me well over a hundred words for sure
Have a great day,
Enjoy!
Click to expand...
Click to collapse
LOL I'm a chef so I do everything at light speed! Id go more into depth but its 4:56am and I have to be at work in 6 hours.
Sent from my SAMSUNG-SGH-I997R using XDA Premium App

hmm,. i just updated to heimdall 1.3.0 im not sure i like it.
i prefer 1.1.0. it was very strait forward.
edit: after further use i definately prefer v1.1.0, 1.3 isnt as friendly for flashing kernels. it wants a firwamre.xml file in the .tar or something, i need to read up on the new heimdal, the old one let you flash the different partitions individually. and the files were not .tar achives, you just extracted the images from the odin packages.
im sure the new version has its purpose but for simplicity id say get 1.1.1. the 1.1.1 frontend package seems to work over the 1.2 comandline package.
v1.3 seems to be for compatability with future devices(or current ones) that have a different partition table, the firmware.xml file can specify what device the files get flashed to. this is more advanced and not for everyone.

Dani, just go to the "Flash" tab. The old style of doing things is still there.

LinuxBozo said:
Dani, just go to the "Flash" tab. The old style of doing things is still there.
Click to expand...
Click to collapse
thanks linux, but i couldnt see how to insert the files. it lets me search for a pit but nothing else.
does the phone need to be connected first?
does it now require a pit before the other files?(i cant get the unbrick ackage to download at this time to test that)
should it be in a .tar file or still extracted like it was before?

Misterjunky said:
I can help, but I do need to know these things first.
Click to expand...
Click to collapse
Like i said... i have NOTHING as far as recovery, flash software, ect... Im rooted and thats it.
When i plug my phone in, and enable USB, it sees my internal & external memory separately, so im good to go.
So if you could help me though this, that would be spectacular.
Hell... i might even be cool and donate you a few bucks on PayPal

What you might want to look into are the "Odin" flashable ROM packages - these will at least get you root and CWM recovery.
The Ubuntu equivalen of Odin is Heimdall, as mentioned previously. There are a few tricks to flashing a complete Odin firmware package with heimdall, next time I'm at my Ubuntu box I'll go into more detail.
To use Odin/Heimdall, once you've got them set up and have something to flash - turn off your phone, and then hold VolUp and VolDn at the same time while plugging in the USB cable to the phone. A yellow screen with an Android doing construction work will appear.
Edit: And Heimdall 1.3.0 is just as easy to flash kernels with as 1.1.0... 'heimdall flash --kernel zImage' (I don't use the GUI frontend ever)

Ph0z3 said:
Like i said... i have NOTHING as far as recovery, flash software, ect... Im rooted and thats it.
When i plug my phone in, and enable USB, it sees my internal & external memory separately, so im good to go.
So if you could help me though this, that would be spectacular.
Hell... i might even be cool and donate you a few bucks on PayPal
Click to expand...
Click to collapse
no donation needed.
Ubuntu doesn't need any special packages or drivers on these phones at all.
actually a heimdall install on ubuntu iis a lot easier than an Odin install in windows, there are never driver issues. infact Ubuntu is eaiser to install than windows so all these Mac users doing the vm thing with windows and Odin are making life hard for themselves.
you can get cwm recovery by flashing a voodoo kernel. this can be done in heimdall (1.1.1 is self explanitory, 1.3.0 might need some explaining but I figured it out so feel free to ask if you need to.) the kernel can also be flashed in a market app called sgs kernel flasher.

Entropy512 said:
Edit: And Heimdall 1.3.0 is just as easy to flash kernels with as 1.1.0... 'heimdall flash --kernel zImage' (I don't use the GUI frontend ever)
Click to expand...
Click to collapse
but us linux newbs like the gui, it reminds us of windows.
but yeah, you're right that is easy.
the new gui requires a pit to flash individual partitions. I found it odd. but its not too difficult.

re: flash custom rom
Ph0z3 said:
Like i said... i have NOTHING as far as recovery, flash software, ect... Im rooted and thats it.
When i plug my phone in, and enable USB, it sees my internal & external memory separately, so im good to go.
So if you could help me though this, that would be spectacular.
Hell... i might even be cool and donate you a few bucks on PayPal
Click to expand...
Click to collapse
First download this cwm recovery kernel here:
http://www.mediafire.com/?srhipjqvy7mpdde
Then rename the downloaded zip file to "update.zip"
and copy it to root of your INTERNAL SD card.
Now boot to the blue text recovery screen of your phone
pressing the up/down and power keys at the same time
then after 10-15 seconds letting go.
If you have trouble getting into the stock blue recovery
menu you can go to the market and download a free
app called "reboot recovery" that way you can go to
the recovery menu with one click.
After you are in the blue recovery menu select "reinstall packages"
You may have to do this twice the first time, then you will see the
clockworkmod recovery menu and you will be ready to flash a
custom rom.
I do now know which custom rom you want to download, so go
ahead and download a custom rom of your choice (must be a zipfile)
and then copy the custom rom zipfile to the root of your internal
sdcard.
After that reboot the phone into recovery using the "reboot recovery"
app or by pressing vol up/down and power keys after the phone is off.
Then you get to the cwm recovery menu and select
"install zip from sd card" then you will see the files in sdcard.
Select the custom rom zipfile from the the menu by going up/down
on list using vol up and vol down buttons. When you highlight the
file you want press the power button and let it start flashing
the custom rom.
On first bootup on custom rom it usually takes twice as long
to complete the boot process.
If you have any questions, let me know.
Good luck, and yes a donation is always welcome
Have a great day,
Enjoy!

alright... got it loaded...
-phone didnt catch fire.
-the sketchy beaner down the road hasnt stolen my car yet
-i still have 1/2 a pot of tea left...
:: UPDATE ::
STEP 9) Press OK and hold your breath. When 3e recovery comes up, just select reinstall packages.
yeah... i never got that... is that an issue?
2nd thing, was kinda hoping it would be a bit louder... since it has voodoo sound. I DLed the FREE manager, but it doesn't seem any different...
3rd thing, how do i change the lock screen back to the default? (just the large pane, instead of the sliders)
That aside... now that ive had it up and running for a few hours and able to play online and play games to really test it. I really like it. nice and smooth, quick as hell too!
@MisterJunky - It appears my PayPal was attacked, so once i get it sorted and un-frozen, ill send ya a few bucks for helping me.

help on my previous.... anyone?
.....?

voodoo sound is mainly for recording and headphones( headphones more so than recording) . it had no effect on the external speaker.

[GUIDE] How to convert your favorite BML rom to MTD

Before I even start I would like everyone if they haven't already to read this thread http://forum.xda-developers.com/showthread.php?t=1387334 and watch this video on MTD courtesy of QBKing77
http://youtu.be/ds9rwAoI2IQ
I did this with Legendary RC2.2 rom and it worked flawlessly. I will not promise it will work for any other BML rom but I don't see why not.
I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU DO TO YOUR PHONE NOR IS ANYONE ELSE BUT YOURSELF, YOU KNOW THE RISK.... SO WHAT?? WANNA FIGHT ABOUT IT??
Also I would like to thank edfunkycold because it was his work that led me to make this guide. ALL CREDIT GOES TO HIM!!!!! HE IS ALSO NOT RESPONSIBLE FOR ANY DAMAGE!!!!!
REQUIREMENTS
-Micro USB cord
-Currently on a BML rom, if you are on a MTD rom you will have to Odin back
-CWM5 you must use this to make your nandroid back up. NO ACSRECOVERY
GETTING STARTED
Step 1:
Ok so when I did this I was on CM7 which is MTD. So I had to use Odin to flash back to BML. So if you are on MTD already your gonna have to do alittle bit to get back to BML because
you have to make a nandroid backup of the BML rom you want to convert.
If you are on the BML rom you want to convert currently then you can skip to step 2.
This will delete ALL your DATA, make sure you backup all your music, photos, videos, etc. And use Titanium Backup to backup all your apps and copy all this to your pc.
Follow these video guides to Odin back to the stock froyo rom. Once you are done and rooted with CM5 on the BML rom you want to convert you can go on to step 2.
Courtesy of QBKing77
First follow this video http://www.youtube.com/watch?v=MFazLOVXPns this will put to on stock froyo EC05
Then you will follow this if you can't OTA update to the EI22 modem http://www.youtube.com/watch?v=7H6k-WNcpcA
Then follow this because if you try and flash CWM it won't work till you do this http://www.youtube.com/watch?v=kwFRzzIqouE
And finally follow this and make sure you don't use the ACSrecovery in the video instead download the CM5.tar.md5 Odin flashable version in the Development section http://www.youtube.com/watch?v=jWOLEXqAeCc
Once you are done you can flash to whatever EI22 BML rom you want. The kernel does not matter so flash one don't flash one doesn't really matter. I flashed to Legendary RC2.2 because that is my favorite rom and it's what edfunkycold did also. Though this should work with any EI22 BML rom.
Step 2:
I like to make sure that everything is running smoothly on the BML rom before backing up. Boot into recovery and make sure your on the lastest version on CWM NOT ACSrecovery. Make a nandroid backup of your rom.
Step 3:
Now you will have to download and flash to a MTD rom, this converts you to MTD and you will not be able to go back to BML unless you follow step 1. I suggest CleanGB MTD rom by Toadlife becaue it's small and you only have to convert to MTD other then that the MTD rom you flash to is irrelevant. Wipe 3X and flash your MTD rom, your phone will reboot during the conversion to MTD. Once you are done Wipe 3X again.
Step 4:
Boot up your phone, you are now on MTD. Plug your Epic into your PC and browse your SD card. Go to the clockworkmod folder and open up your backup folder it will be named something like this "2011-12-31.08.33.43". You must rename the ext4 or rfs in the files cache.ext4.tar, system.ext4.tar and data.ext4.tar or rfs instead of ext4 depending on the rom you backed up to yaffs2. So they will look like this cache.yaffs2.tar, data.yaffs2.tar, and system.yaffs2.tar
(MAKE SURE YOU CHANGE ALL FILE NAMES ON THE COMPUTER, DON'T USE YOUR PHONE IT SEEMS TO CAUSE MD5 ERRORS WHEN RESTORING)
Then open the nandroid.md5 file in notepad. Press CTRL+H and it will open a little window. Under "find what" type ext4 and under "replace with" type yaffs2. Then click "replace all" If your not sure if your on ext4 or rfs just change ext4 to rfs and click "replace all" again. Then close out of this window and save the file. Thanks Flastnoles11 I think you said you did it this way in notepad
Step 5:
Once you have renamed the 3 files and changed all the ext4 or rfs's to yaffs2 in the nandroid.md5 file you can unplug and turn off your phone and boot into CWM5. Wipe 3X. Navigate to "backup and restore" then to "advanced restore". Choose your backup. Choose "restore system" and let that run. Then navigate back to "advanced restore" pick your backup and choose "restore data". Navigate back to advanced restore one last time and choose your backup and choose "restore cache". I do one final Wipe 3X and wipe data/factory reset because last time when I didn't I kept getting the download error in the market. But I just had to do the factory reset in the "Privacy" menu under settings on your Phone. Also Fix your permissions while you are in CWM.
Step 6:????
Step 7:Profit!!!!
Boot up your phone and you are now on whatever ROM you backed up with your setup if you had it setup before but you are on MTD. You can go to "about phone" and check your kernel version. It should be something or other MTD. But your build number is whatever your BML rom was. Wanna make sure your actually on MTD?? Well first off you didn't have to Odin back to it. Second you can go and download any TW.MTD Kernel and flash it. Please DON'T flash a CM.MTD kernel.
Here is a picture of my "about phone" showing that I am on Legendary RC2.2 but running the Shadow MTD kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So try this out if you want and post your findings and problems and whatever. Sharing is caring.
Happy Hacking!!!!! ​

Excellent post!! Should be a sticky. I'm not on mtd yet , because I'm waiting for all the dust to settle from the fast and furious pace of development and bug fixes , but I'm leaning in that direction.
Its guides like this that'll make it easier for us mortals to take the plunge.
Sent from my SPH-D700 using xda premium

Excellent guide and very easy to follow! I did this before you posted this but it would've been a lot easier to figure out if I would have seen this first!
Sent from my SPH-D700 using Tapatalk

Xalky said:
Excellent post!! Should be a sticky. I'm not on mtd yet , because I'm waiting for all the dust to settle from the fast and furious pace of development and bug fixes , but I'm leaning in that direction.
Its guides like this that'll make it easier for us mortals to take the plunge.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Well thank you, MTD seems to have no affect on the ROM, it runs smoothly and no weird reboots or such. The only problem I had was not being able to download anything from the market, which was solved by a factory reset. Though I don't have service right now I can't confirm mms or 3g or such working
flastnoles11 said:
Excellent guide and very easy to follow! I did this before you posted this but it would've been a lot easier to figure out if I would have seen this first!
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Sorry man, took me forever to write this up. I wanted to make sure everything was working smoothly too. I did this like 4 times now with no ill affect. Take the "Plunge" now people!!!!!

Was on CM7 MTD, followed the steps here to go back to a Nandroid I had from 2 days ago of Legendary. Then flashed the newest Samurai Katana MTD kernel. No wipe. Reboot. BAM. Amazing. Thanks x100

I plan on making the jump this weekend. Good to find all this info in one place. Thanks.

kennyglass123 said:
I plan on making the jump this weekend. Good to find all this info in one place. Thanks.
Click to expand...
Click to collapse
I walked a drunk person through doing it while I was drunk. It's easy. They only had their phone and a tab.

You could just take the /system from the cwm flashable of your favorite rom and paste it into the cm7 cwm flashable. As long as you flash a tw mtd kernel you'd be fine
sent from my touchwiz 4.5-ed epic

So I can make ACS ICS v5 a MTD ROM?
*faints*
I'll try it later today!

The Root said:
I walked a drunk person through doing it while I was drunk. It's easy. They only had their phone and a tab.
Click to expand...
Click to collapse
Dude! You are like my MTD inspiration! Can I PM you after a few drinks each and I get stuck? There is no heading into this sober...LOL!
Sent from my SPH-D700 using XDA App

The Root said:
I walked a drunk person through doing it while I was drunk. It's easy. They only had their phone and a tab.
Click to expand...
Click to collapse
Ok two drunk phone geeks are in a bar ...

jdelano said:
Ok two drunk phone geeks are in a bar ...
Click to expand...
Click to collapse
We made plans to get trashed at the bbq. lol
If anyone needs help let me know. It's shockingly easy.

Will this work while running a BML theme on a BML rom? Or does it exclusively apply to a clean rom?

I read through it all, and I think I got it.
One final question....
Once I have converted everything over, and do a nand backup, I should then be able to flash between backups of CM7 and My fav ROM (Leg 2.2), correct?
This Epic post as brought to you via Tapatalk

macb1997 said:
Will this work while running a BML theme on a BML rom? Or does it exclusively apply to a clean rom?
Click to expand...
Click to collapse
I am not sure about this, the rom will have everything you had before the convert but if it doesn't all you have to do is redownload the theme and befre you flash it navigate to mounts and storage then mount system, flash your theme, then unmount system and rebbot
DCRocks said:
I read through it all, and I think I got it.
One final question....
Once I have converted everything over, and do a nand backup, I should then be able to flash between backups of CM7 and My fav ROM (Leg 2.2), correct?
This Epic post as brought to you via Tapatalk
Click to expand...
Click to collapse
Yes after this you can switch back and forth between whatever MTD roms you want, and if you wanna go back just do the advanced restore again then BLAM!!!!

The_Legendary said:
Yes after this you can switch back and forth between whatever MTD roms you want, and if you wanna go back just do the advanced restore again then BLAM!!!!
Click to expand...
Click to collapse
Awesome, I have SO been waiting for a way to do that!
I am sure this will be made easier at some point, but the directions had everything I need to do it, so I am super pumped.
My fav ROM available via nand, and official CM7
Talk about being one heck of a happy Epic owner!
This Epic post as brought to you via Tapatalk

kennyglass123 said:
Dude! You are like my MTD inspiration! Can I PM you after a few drinks each and I get stuck? There is no heading into this sober...LOL!
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
PM me tooo! I can't tell you how many times I got trashed and thought I had a great idea for my phone and messed it up lol. Now I'm gonna stop getting off subject lol
Thanks for your work legendary
Sent from my SPH-D700 using Tapatalk

travismoreno said:
PM me tooo! I can't tell you how many times I got trashed and thought I had a great idea for my phone and messed it up lol. Now I'm gonna stop getting off subject lol
Thanks for your work legendary
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
No problem guys, but I do recommend not get drunk before trying this lol. Though it is the new year. Also I flashed your minimalistic black theme v4.5 over this and it is working great, so thank you
Sent from my Legendary RC 2.2 MTD Converted Epic

The_Legendary said:
No problem guys, but I do recommend not get drunk before trying this lol. Though it is the new year. Also I flashed your minimalistic black theme v4.5 over this and it is working great, so thank you
Sent from my Legendary RC 2.2 MTD Converted Epic
Click to expand...
Click to collapse
Thanks for this man! I did do it sober, and I bravely went in without wipes. Just wiped cache and Dalvik before flashing MTD Shadowkernel. Awesome work!

kennyglass123 said:
Thanks for this man! I did do it sober, and I bravely went in without wipes. Just wiped cache and Dalvik before flashing MTD Shadowkernel. Awesome work!
Click to expand...
Click to collapse
Yeah you shouldn't have to do any wipes before you restore, because this basically does all that for you. Once you are on it though you should normal wipe to flash kernels, etc.

[ROM][AOSP][LOTK]~Jelly Bean 4.2.2~Code Name Bleu Mynt~04/01/2013

JellyBean 4.2.2 Code Name Bleu Mynt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recompiled system and boot images from Evervolv-Acies-3.2.0-Nightly-2013.03.26 and added a bunch of tweaks and mods to go with it,enjoy!!
Thanks to the following:
preludedrew
TroNit
Installation:(Before installation,make sure you have SmelkusMod revovery and are partitioned to ext.3 or above).
1)Download the rom
2)Download Crossbreeder
3)Copy downloaded items to your sd card
4)Boot into Recovery
5)Wipe everything at least 3 times,i shouldnt have to tell you to not wipe your sd card
6)Find the rom and install
7)Run through set-up and set up your rom
8)Boot into recovery and wipe cache and dalvik and install Crossbreeder
9)Open Android Tuner and set it up,make sure to reboot after you set each tweak,if you dont you will get a bootloop
10)You are now GOLDEN!!
The Rom:
Jelly Bean 4.2.2(AOSP)
Recompiled from Evervolv system and boot images(Evervolv-Acies-3.2.0-Nightly-2013.03.31)
Black Dome Kernel SBC v.2.2 R1(JB Kernel)
Sony Playstation Store Enabled(Sony Playstation Store)
Market Spoof Enabled(Market Enabler)
North America GPS Enhancement(Stronger GPS Signal For JB)
Custom Blue Mint Theme(CM10.1 Theme Beta)
Custom Blue Mint Dialer
Custom Blue Mint Keyboard
Custom Boot Animation(Ubuntu Style Blue Mint Boot Screen)
Custom Wallpaper
Apex Launcher(Android Launcher Beta)
Android Tuner(Android Tweaker Beta)
Boot Animation Changer(Changes Boot Animations,Over 300 To Choose From)
Premium Widgets(Clock & Weather Widgets Beta)
Drive Droid(Download/Install Any Of The Linux Distributions To Your Phone,Using Your Phone as a Virtual Machine)
Not Working:
FFC
Video
Netflix(Video)
Tweaks:
Crossbreeder
Rom:
Code Name Bleu Mynt​

Mine also.

Re: [ROM][AOSP]Jelly Bean 4.2.2~Code Name Bleu Mynt~03/30/2013
Downloading now. Thanks Diablo!
Sent from my X10 using xda premium

Mounts 2sd problem
justgonecrazy said:
Downloading now. Thanks Diablo!
Sent from my X10 using xda premium
Click to expand...
Click to collapse
Your device does not have the ability to switch to the superuser account. This is needed in order for the startup script to do its work, and needed by the application it self in order to write configurations to the property folder. Please enable this account (Root your device). You can find posts on how to do this for your specific device on XDA-Developers.com
Clicked on settings and tried to configure busybox and it says "The current busybox version is outdated or to limited. Please update to a newer one.
Install Script. The init.d startup script could not be copied to the system partition.
My device is rooted.
Please help. This rom looks BAD ASS!

justgonecrazy said:
Your device does not have the ability to switch to the superuser account. This is needed in order for the startup script to do its work, and needed by the application it self in order to write configurations to the property folder. Please enable this account (Root your device). You can find posts on how to do this for your specific device on XDA-Developers.com
My device is rooted.
Please help. This rom looks BAD ASS!
Click to expand...
Click to collapse
I've never heard of that before????That's a new one on me brother,try reinstalling it.

Re: [ROM][AOSP]Jelly Bean 4.2.2~Code Name Bleu Mynt~03/30/2013
Sweet rom man!!!!!! Thanks for the killer android nugget of goodness!!! You pulled through again!
Sent from my PC36100 using xda app-developers app

Re: [ROM][AOSP]Jelly Bean 4.2.2~Code Name Bleu Mynt~03/30/2013
Will dl and flash after work, looks wicked! I'll be happy to let you know how it runs, been looking for some good jelly beans and Diablo's the man for keeping the dream alive!
Sent from my PC36100 using xda app-developers app

Re: [ROM][AOSP]Jelly Bean 4.2.2~Code Name Bleu Mynt~03/30/2013
Diablo67 said:
I've never heard of that before????That's a new one on me brother,try reinstalling it.
Click to expand...
Click to collapse
Does this work with dta2sd? For some reason I cant get this one to work
Sent from my X10 using xda premium

justgonecrazy said:
Does this work with dta2sd? For some reason I cant get this one to work
Sent from my X10 using xda premium
Click to expand...
Click to collapse
No DT's App2sd,it will not work,this rom is set up for Mounts2sd,just follow the directions and dont flash dta2sd.It erases dta2sd.

Diablo67 said:
No DT's App2sd,it will not work,this rom is set up for Mounts2sd,just follow the directions and dont flash dta2sd.It erases dta2sd.
Click to expand...
Click to collapse
Okay I'm getting somewhere now, I downloaded root checker and it says I don't have root access while I'm on this rom. I switched back to AlienMOD Solar Flare Series 5! and my root access is back to normal. Any Ideas?

justgonecrazy said:
Okay I'm getting somewhere now, I downloaded root checker and it says I don't have root access while I'm on this rom. I switched back to AlienMOD Solar Flare Series 5! and my root access is back to normal. Any Ideas?
Click to expand...
Click to collapse
Did you try to redownload and reinstalling it?

I just flashed this. ROM looks amazing Diablo. 2 things...
1- I can't seem to get the Mounts2SD to work. I can not get the button to work. It just sits on the first screen and I touch all over and I have tried flashing it 3 times and still can't get the button to work. I have not tried to re-download yet.
2- Is there a way to change the contacts page to a dark mode? It is white background and a light grey letters and is tough to see.
Other than that I am digging it so far.

ice3bills said:
I just flashed this. ROM looks amazing Diablo. 2 things...
1- I can't seem to get the Mounts2SD to work. I can not get the button to work. It just sits on the first screen and I touch all over and I have tried flashing it 3 times and still can't get the button to work. I have not tried to re-download yet.
2- Is there a way to change the contacts page to a dark mode? It is white background and a light grey letters and is tough to see.
Other than that I am digging it so far.
Click to expand...
Click to collapse
1-Use your volume keys to navigate and power to choose.
2-I'll work on that for the update.

justgonecrazy said:
Your device does not have the ability to switch to the superuser account. This is needed in order for the startup script to do its work, and needed by the application it self in order to write configurations to the property folder. Please enable this account (Root your device). You can find posts on how to do this for your specific device on XDA-Developers.com
Clicked on settings and tried to configure busybox and it says "The current busybox version is outdated or to limited. Please update to a newer one.
Install Script. The init.d startup script could not be copied to the system partition.
My device is rooted.
Please help. This rom looks BAD ASS!
Click to expand...
Click to collapse
I get the same error message.
ROM is amazing. I love the all the themeing you have done.

curious as to which mounts2sd file to flash
ext4 zip or the mtd zip?

bnasty06 said:
curious as to which mounts2sd file to flash
ext4 zip or the mtd zip?
Click to expand...
Click to collapse
Flash the one i posted in the bottom of the OP.Its An Aroma installer.

ice3bills said:
I get the same error message.
ROM is amazing. I love the all the themeing you have done.
Click to expand...
Click to collapse
I wonder why some are getting a good install and some aren't,check the MD5SUM guys and dont download from your phone,sometimes it will give you a bad download.Not saying your not,but make sure to follow the instructs.
Edit: I just reflashed the rom again and im not getting a root/su issue.Is this an issue when using Mounts2SD? or a general issue?

Diablo67 said:
Did you try to redownload and reinstalling it?
Click to expand...
Click to collapse
I tried downloading 3 times now and flashing each different one. Checked m5sum and it matches. Same problem, it doesn't recognize my root. When I open Terminal it says at the top "void endpwent( ) (3) is not implemented on Android" Next line says "sh-4.1$ export PATH=/data/local/bin:$PATH" Kinda glad to see someone else has the same problem and I'm not going crazy. Love the theme on this one. Let me know if I can give you any more information.
The issue occurs on first boot before I even try to flash mounts2sd. I'm following the instructions word for word. Wiping everything 3x

I have re-flashed everything and tried the mount2sd and still says no root access. I opened up Titanium and it basically says the same thing, but it shows The space used for the system ROM, Internal, SD card and SD card(a2sd). Plus I have a good percentage of the apps I have on my last rom I used in the app drawer.

justgonecrazy said:
I tried downloading 3 times now and flashing each different one. Checked m5sum and it matches. Same problem, it doesn't recognize my root. When I open Terminal it says at the top "void endpwent( ) (3) is not implemented on Android" Next line says "sh-4.1$ export PATH=/data/local/bin:$PATH" Kinda glad to see someone else has the same problem and I'm not going crazy. Love the theme on this one. Let me know if I can give you any more information.
The issue occurs on first boot before I even try to flash mounts2sd. I'm following the instructions word for word. Wiping everything 3x
Click to expand...
Click to collapse
ice3bills said:
I have re-flashed everything and tried the mount2sd and still says no root access. I opened up Titanium and it basically says the same thing, but it shows The space used for the system ROM, Internal, SD card and SD card(a2sd). Plus I have a good percentage of the apps I have on my last rom I used in the app drawer.
Click to expand...
Click to collapse
Ok,ill check this out tonite and see what i can come up with for you guys.