This is the EE19 Froyo update package for the Mesmerize. This build replaces any build dated prior or not dated in the name. It is also only for the Mesmerize. I am not responsible for what happens if you flash it to other phones.
This is just an update package, just like what you would get from the USCC home page. I have just pulled it out of Kies build form and turned it into an Odin build for our convenience. What this means, is that you will likely not lose anything that you have downloaded from the market if you just flash the package. What you must understand, is that there may be differences in the packages themselves. If you flash and experience FC's (force closes) on packages after the flash when you first boot up, then you will need to do a wipe data/factory reset and probably flash again.
To use these files: unzip and then flash in Odin using the directions below.
#####IF YOU HAVE VOODOO ENABLED, DISABLE LAGFIX BEFORE YOU USE ODIN#####
1. Pull your phone battery
2. Start Odin
3. Click PIT and select the .pit file from the download
4. Check the PDA box, Click PDA and select the .tar.md5 file from the download
5. Plug your phone into the USB port and hold volume down
-your phone should go into download mode
6.Verify that Odin sees your phone.
-if not, try another USB port
7. Click Start
It will look similar to this. -- and when i say similar, I mean 'not exactly like'
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mesmerize EE19 stock update
OK. New upload that has been verified good downloaded and md5 checksum is checking out now.
Stock means not rooted. If you want to root this build, SOC should still do the trick. I will have a PnP for it soon.
Do we know what all has changed/been updated? I looked on the uscc page but no info was there. As always thanks for your work . It is always appreciated
Tap-a-Talked
scarmon25 said:
Do we know what all has changed/been updated? I looked on the uscc page but no info was there. As always thanks for your work . It is always appreciated
Tap-a-Talked
Click to expand...
Click to collapse
Yeah, this is another of my source leaks. I sometimes get them before the company does. This won't be released for a little bit on the website, but it is coming.
As far as what is different, there are bug fixes that may or may not affect everyone. From what I have read, the main fix is a missed call bug that was actually present back in 2.1 and carried over into 2.2 that was finally found and fixed. As for anything else, I'm just getting into it, so we'll see what it has to offer.
Ah you the man. One last question. If we odin this does it wipe the phone. For example in on heinz and themes and such. Will this on undo all that or will this just update what's already on the phone.
Tap-a-Talked
scarmon25 said:
Ah you the man. One last question. If we odin this does it wipe the phone. For example in on heinz and themes and such. Will this on undo all that or will this just update what's already on the phone.
Tap-a-Talked
Click to expand...
Click to collapse
I assume we'll have to create new theme's and rom's from this build so if you don't want stock you'll have to wait until things roll out.
bdemartino said:
I assume we'll have to create new theme's and rom's from this build so if you don't want stock you'll have to wait until things roll out.
Click to expand...
Click to collapse
its gonna be fun on a bun!!!! as soon as hes got the PnP released for this ill get themes ported to it...will also have no clock mod, puzzle mod, and ill see if i can get puzzle answer without tsm parts but i dont know how well that will work
That's cool with me. No hurry I've been happy with this setup since I got it and don't mind waiting till things get rolling. You guys rock
Tap-a-Talked
Big thanks for this! The missed calls were a pain!
On first try I got a MD5 hash value is invalid error.
so got some info on the error code and got it to go by deleting the md5 in the file name and just leaving it as .tar
after deleting the md5 it converts it to a winrar file and when trying to use odin on it, it does nothing. any ideas?
ok, so after it converted to the winrar file renaming it once again with the .md5 at the end did the trick. go figure.
Kick ass. I'll try this tomorrow since I'm out of town right now. Hope this solves my missed calls/texts issue.
Sent from my SCH-I500 using XDA App
I can't get the .md5 to rename to a usable .tar file. Help!!
Did the fascinate suffer from this bug?
If we are using a VZW rom/radio, would the bug still affecT me? ...i suppose the amazing builders that make this device worth owning will be hard at work on framework updates? Thanx for the package!
Sent from my SCH-I500 using XDA Premium App
From what I can tell on ec01 I missed even more calls then when on ec10
Sent from my SCH-I500 using XDA App
stephenj37826 said:
From what I can tell on ec01 I missed even more calls then when on ec10
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Then I bet vzw had their own update coming soon
but this tells me that all their programmers aren't working on GB yet!
As usual the biggest obstacle to the progress of cm7 is samsung! Gah ...hopefully these bugs were fixed finally! I've missed at least a few importanto calls
Sent from my SCH-I500 using XDA Premium App
Tortuga1234 said:
Big thanks for this! The missed calls were a pain!
On first try I got a MD5 hash value is invalid error.
so got some info on the error code and got it to go by deleting the md5 in the file name and just leaving it as .tar
Click to expand...
Click to collapse
MD5 is a checksum process to make sure you're not flashing a corrupted file, by removing that from the name you're also removing the md5 check, I don't think that's a good idea even tho it may still work. I haven't tried this yet so I'm not sure but sounds like a corrupted download would be the cause.
Oh, Thanks for the heads up!
Flashed, rooted, and got OTB on it before bed and it has been running very smooth ever since.
Sent from my SCH-I500
So this radio is the most recent radio for the Mesmerize correct? And I can Odin this to my rooted phone with the Heinz rom?
I am running stock Rom but using Voodoo kernel and voodoo lagfix. Can I just disable lagfix and then flash this in Odin?
Sorry for my ignorance, just wasn't sure if I need to revert everything back to stock before flashing this.
Thanks!
Thank you, I will be following this one. My only complaint with this phone has been missed calls. I am also interested in how this will work with Heinz 57 ROM.
Related
Here is a collection of my personal MM themes for status bar icons.
(note - i did not create the img files them selves. i just packaged them up so people can use them with there roms. If anyone finds there work here and would like me to remove it please PM RIGHT AWAY!!!!. With that said i cant make img files, if you request something please attach a link to an img that you would like me to use.)
**Please make a back up of your ROM before installing anything I have created!!!**
Email
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link ---> http://db.tt/7HwBZAH
(After applying you will need to do a restart of the phone to take effect.)
Gmail
Link ---> http://db.tt/qzlAScK
(After applying you will need to do a restart of the phone to take effect.)
SMS
link ---> http://db.tt/oclNqoI
(After applying you will need to do a restart of the phone to take effect.)
Notify Icons
link ---> http://db.tt/2YSrg5e
(After applying you will need to do a restart of the phone to take effect.)
(img look pix-elated because i made them bigger for you to see. It will look smoother on your phone)
Let me know if you have any problems. This has only been tested on SkyRaider 3.3 final. If you have any more requests just let me know and I will try to make them for you.
And if you like what i do please consider on giving me more space on my drop box. I don't need money. I just need space so i can offer more room for my MM themes.
http://www.dropbox.com/referrals/NTEyMzcyNzg2OQ
synisterwolf said:
Here is a collection of my personal MM themes for status bar icons.
**Please make a back up of your ROM before installing anything I have created!!!**
Gmail
Link ---> http://db.tt/qzlAScK
(you might need to apply this twice. Some people said they did and some said they didn't.)
SMS
link ---> http://db.tt/oclNqoI
(you might need to apply this twice. Some people said they did and some said they didn't.)
Notify Icons
link ---> http://db.tt/2YSrg5e
(img look pix-elated because i made them bigger for you to see. It will look smoother on your phone)
Let me know if you have any problems. This has only been tested on SkyRaider 3.3 final. If you have any more requests just let me know and I will try to make them for you.
And if you like what i do please consider on giving me more space on my drop box. I don't need money. I just need space so i can offer more room for my MM themes.
http://www.dropbox.com/referrals/NTEyMzcyNzg2OQ
Click to expand...
Click to collapse
Can you make a MM for the HTC Mail application. Please.
Oops forgot to post that one. It will be up shortly.
I've tried to apply the Gmail one twice, both times it made Gmail stop working. I'm running Virtuous 3.1.0 had to restore with Titanium Backup. Any thoughts?
Hey thanks for the work. I tried the Gmail, Mail and SMS and they all stopped working (applied twice). Had to restore.
Don't fret, the others that I have tried have done the same.
I am using Rooted Stock Froyo, Deodexed, S-OFF.
Thanks for the effort.
Just tested gmail and mine disappeared too. I applied it again and it came back with the notify working. Please try this and report back.
Sent from my ADR6300 using XDA App
looks like you will need to do a restart after you applied the themes. i guess the system needs to re read the apk to make them work.
(this is still a learning experience for me.... sorry again)
synisterwolf said:
looks like you will need to do a restart after you applied the themes. i guess the system needs to re read the apk to make them work.
(this is still a learning experience for me.... sorry again)
Click to expand...
Click to collapse
YAHTZEE! We have a winner! Very nicely done! Works for me now.
I'm glad it works now. I guess I just needed more testers before going live.
Sent from my ADR6300 using XDA App
GMail works fine. I applied the icon pack twice and rebooted, but no joy. It does not work. Like I said, I'm using Virtuous 3.1.0 with the Revolution Theme.
Cincybearcatfan said:
GMail works fine. I applied the icon pack twice and rebooted, but no joy. It does not work. Like I said, I'm using Virtuous 3.1.0 with the Revolution Theme.
Click to expand...
Click to collapse
Can you tell me where you framework-res.apk is located. And if possible make a copy of it and send it to me?
Sent from my ADR6300 using XDA App
synisterwolf said:
Can you tell me where you framework-res.apk is located. And if possible make a copy of it and send it to me?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Not sure where to even look to find that.
Is the link for the email one broken or pulled? Because there is nothing showing up. SMS one worked great, thank you.
Cincybearcatfan said:
Not sure where to even look to find that.
Click to expand...
Click to collapse
ok. i will download the rom and install it and see whats up with it.
there was an extra .bd file that was not suppose to be in the zip that i deleted. please try again while i download the rom and test
never mind. i found out why it does not work. can i use us as a tester???
Yes, I'll test it no problem.
00McD00 said:
Is the link for the email one broken or pulled? Because there is nothing showing up. SMS one worked great, thank you.
Click to expand...
Click to collapse
i pulled it. its back up. i forgot that 7zip adds a thumb.db to any img folder. and i did not want anyone install it to there phone because it might cause a boot loop for a file the phone does not know. i double checked every file again so its should all be clean and good to go
Cincybearcatfan said:
Yes, I'll test it no problem.
Click to expand...
Click to collapse
pm sent. please make a back up before testing. apply once and do a full restart
synisterwolf said:
i pulled it. its back up. i forgot that 7zip adds a thumb.db to any img folder. and i did not want anyone install it to there phone because it might cause a boot loop for a file the phone does not know. i double checked every file again so its should all be clean and good to go
Click to expand...
Click to collapse
Oh awesome, I see it's back up now. Should have just been more patient. Thanks again.
Tried the new icon.zip force closes with an error message
"The file we are looking for mnt/sdcard/AndroidThemes/Icon-1/Framework-res in this theme but it does not exist, skipping"
Cincybearcatfan said:
Tried the new icon.zip force closes with an error message
"The file we are looking for mnt/sdcard/AndroidThemes/Icon-1/Framework-res in this theme but it does not exist, skipping"
Click to expand...
Click to collapse
ops i forgot to say that the "android Theme" folder needs to be clear. the xml is trying to find a file that you dont have because the phone made a copy of the "icon" folder.
Please clear out the android theme folder on your sd card and unzip again.
and delete the old zip files you have in you download file and re download.
synisterwolf said:
ops i forgot to say that the "android Theme" folder needs to be clear. the xml is trying to find a file that you dont have because the phone made a copy of the "icon" folder.
Please clear out the android theme folder on your sd card and unzip again.
and delete the old zip files you have in you download file and re download.
Click to expand...
Click to collapse
ok so i renamed the hole zip xml and all so it wont conflict if you still have the old one on the phone.
Updated to include 2.2.1
#####IF YOU HAVE VOODOO ENABLED, DISABLE LAGFIX BEFORE YOU USE ODIN#####
If you are unfamiliar with how to use Odin pay attention to what you are doing. Flashing the wrong file or flashing to the wrong place can potentially be a nightmare.
*********ONLY FLASH MESMERIZE FILES TO YOUR MESMERIZE*****
*********ONLY FLASH MESMERIZE FILES TO YOUR MESMERIZE*****
First download both files if you don't already have Odin. Unzip the Mesmerize DI14 zip file or EC10 zip file. You will notice that there is a .pit file and a .tar.md5 file. You will flash both at the same time if you want to go COMPLETELY back to stock. This process will wipe all data from your phone except your phone number and anything on your sdcard.
1. Pull your phone battery
2. Start Odin
3. Click PIT and select the .pit file from the download
4. Check the PDA box, Click PDA and select the .tar.md5 file from the download
5. Plug your phone into the USB port and hold volume down
-your phone should go into download mode
6.Verify that Odin sees your phone.
-if not, try another USB port
7. Click Start
It will look similar to this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mesmerize Files located here:
Mesmerize 2.2.1: EE19 Full Froyo Restore Package
Mesmerize 2.2.1: EC10 Full Froyo Restore Package
Mesmerize 2.1: Full Eclair Restore Package
Odin3 v1.3 located here: Odin3
This is a stock kernel that is in a flashable zip. If you are just wanting or needing to go back to a stock kernel for some reason and do not want to flash everything back to stock, this is what you want. If you are using a voodoo kernel, make sure you disable lagfix before flashing the stock kernel.
Mesmerize EE19 kernel only: Stock EE19 kernel only
Mesmerize EC10 kernel only: Stock EC10 kernel only
Mesmerize DI14 kernel only: Stock DI14 kernel only
Will this unroot or take voodoo off your mesmerize? kind of want a fresh start.
chidesd said:
Will this unroot or take voodoo off your mesmerize? kind of want a fresh start.
Click to expand...
Click to collapse
Yes to both. Just make sure you disable voodoo lagfix before you do anything.
Sent from my SCH-I500 using XDA App
phidelt82 said:
Yes to both. Just make sure you disable voodoo lagfix before you do anything.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
for some reason I cant disable it in the boot menu
nice thank you, been looking for these in case of emergency
chidesd said:
for some reason I cant disable it in the boot menu
Click to expand...
Click to collapse
Just add a file to the voodoo folder on your sdcard called disable_lagfix and reboot. It should talk through the disable just like the enable.
Sent from my SCH-I500 using XDA App
I'm guessing i have to be running windows to do this? I wanted to have a windows free machine. But I guess when getting into this kind of thing thats impossible.
G'day
Great work phidelt82
I've stickied this thread as it will come in handy for a lot of people I'm sure
the_scotsman said:
G'day
Great work phidelt82
I've stickied this thread as it will come in handy for a lot of people I'm sure
Click to expand...
Click to collapse
Thank you sir!
n7mesis said:
I'm guessing i have to be running windows to do this? I wanted to have a windows free machine. But I guess when getting into this kind of thing thats impossible.
Click to expand...
Click to collapse
Just run a virtualbox. Six months ago I thought it was great that I got away from Windows at home when I got a MacBook Pro. I thought it was perfect. Then, like you found that I still needed Windows, plus Linux... lol Sometimes you can't win for losing. So now I have a work laptop that has Windows with a Linux virtuabox and a MBP at home running a Windows and Linux virtualbox. The sad thing is, the only work I do on the MBP now, is graphics.
Worked perfectly! thanks for the files and step by steps.
androidjosh said:
Worked perfectly! thanks for the files and step by steps.
Click to expand...
Click to collapse
That's what I'm here for.
Remember im noob so be nice! Couple questions, I assume your phone number and MEID stay the same? Where are these stored? Does this replace the current kernel?
droidroidz said:
Remember im noob so be nice! Couple questions, I assume your phone number and MEID stay the same? Where are these stored? Does this replace the current kernel?
Click to expand...
Click to collapse
Very good question, and I try to be nice even when I think an answer is obvious. This one isn't so obvious and I wondered the same thing when I first flashed it.
Yes your phone number and MEID stay the same and they stay in on the phone. Where they are stored is a question that I haven't really looked in to. I think they may be stored in the radio portion of the phone, but again, I don't know for sure. What you are flashing is the PDA portion and the kernel, so yes it does replace the current kernel. Also, in case you have flashed a voodoo kernel, make sure you disable lagfix before you use Odin. If not, you may end up with a mess trying to fix the problems it will create.
any chance we can get the files to go back stock to cellular south on here?
don't really plan on it unless we have to in order to upgrade WHENEVER that will be.. but you never know
elijahblake said:
any chance we can get the files to go back stock to cellular south on here?
don't really plan on it unless we have to in order to upgrade WHENEVER that will be.. but you never know
Click to expand...
Click to collapse
Make friends with the in store technicians if you have them. That's the only thing I can recommend for now.
hemdall for linux...
n7mesis said:
I'm guessing i have to be running windows to do this? I wanted to have a windows free machine. But I guess when getting into this kind of thing thats impossible.
Click to expand...
Click to collapse
Linux has a odin like program called hemdall it is a very powerful program and is not for the timid as you can really mess up you phone if you dont know what to do...it can be nonforgiving...hemdall is a good program and will do everything you need to do to flash...Installing Heimdall (Open Source Odin)....................Odin is a leaked Samsung program never meant for public consumption and runs only in Windows. It won't run in Linux under Wine, but will run through VirtualBox with some modifications to see the USB.... Odin on GNU/Linux If your not familiar with VirtualBox, it does not emulate Windows. It runs an actual copy of Windows inside Linux. You have to have a licensed copy of Windows available for this.
There is an open source alternative that works on Linux and Mac's as well. It's called Heimdall, and has been in testing at XDA for several months now. Read about it more and download the latest version herehttp://forum.xda-developers.com/showthread.php?t=755265: Heimdall – Glass Echidna. I used this to flash the DJ05 modem, so can confirm it works on the Fascinate.
https://launchpad.net/~modycz/+archive/modycz-heimdall
Instructions to get this for Ubuntu are here: https://launchpad.net/~modycz/+archive/modycz-heimdall
sudo add-apt-repository ppa:modycz/modycz-heimdall
sudo apt-get update
sudo apt-get install heimdall
heimdall help
[Note: The version at launchpad is out-of-date and the newer version is much easier to use. Until this is updated, check Heimdall – Glass Echidna for latest version to install.]
THIS IS A POWERFUL PROGRAM, PROCEED WITH CAUTION ....I hope this has been helpful....
I see you linked Odin 1.3.... does it matter if I'm using a newer version? I have 1.6 thanks.
1greek4u said:
I see you linked Odin 1.3.... does it matter if I'm using a newer version? I have 1.6 thanks.
Click to expand...
Click to collapse
Probably not. 1.3 is what I have and what I know works. I'll have to check out 1.6.
phidelt82 said:
Just run a virtualbox. Six months ago I thought it was great that I got away from Windows at home when I got a MacBook Pro. I thought it was perfect. Then, like you found that I still needed Windows, plus Linux... lol Sometimes you can't win for losing. So now I have a work laptop that has Windows with a Linux virtuabox and a MBP at home running a Windows and Linux virtualbox. The sad thing is, the only work I do on the MBP now, is graphics.
Click to expand...
Click to collapse
Ok, thank you. That is good news. I wasn't sure if i could do something like this through virtualbox because i didn't know if the usb support was good enough. I didn't want to brick my phone. So If i set up my virtualbox guest to see my phone.....I should be able to just follow these instructions? Is there any additional configuration i need?
First and foremost I take no responsibility to what this update package will do to your device. That being said I have tried this successfully on multiple rooted tablets running US 8.6.5.6.
Long story short if your rooted this will update you to 8.6.5.9 and update your CWM to 3.2.0.1 provided by Roach2010. Simply download to root of sdcard and flash through CWM.
All credit goes to Roach2010 and the package he provided for the 3.2 upgrade.
UPDATE: This is for Rooted stock firmware only, if you applied Netflix patch or any other mod's this will fail. Revert your changes and then give this a shot.
UPDATE2: Added the WW package but I can't test this. Please let me know how it goes.
Nice, waiting for WW version also
Sent from my Transformer TF101 using Tapatalk
Remember !!!!
If you already apply Netflix patch You cant update. (MD5 error) Using root explorer go to system/lib and rename
libnvomx.so file to libnvomx.so.tmp
and
original libnvomx.so.bak file to libnvomx.so.
After Update using CW mode ( Remember to mount all before)
*** [when you update nexflix patch last time this file replace to XOOM's libnvomx.so file. Thats why you need to do this.]***
rufik said:
Nice, waiting for WW version also
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
If someone can get me the WW package I can cobble something together. I won't be able to test however since I am on US.
Let me know.
Backing up now to try. I tried the unroot and update method but it kept failing, im betting some file I modified (like the Xoom SystemUI) or something I deleted is pissing it off. Hopefully this resolves it.
I never did the netflix patch so I should be good right? I should be able to run this, sideload netflix and party all the time?
I un-rooted, trying to get the update ... will this still work ?
nolf3 said:
I un-rooted, trying to get the update ... will this still work ?
Click to expand...
Click to collapse
If you unroot that why you did'n update original one. I saw some one upload in another thread. I think this is only for rooted one and this is modified version.
I was able to install this, it appears to have updated my build. I did run into some issues where it got mad because I had uninstalled the ASUS programs that it wanted to update but once I pasted those back in it ran fine (i of course then deleted them again).
Now I just need to clear this firmware thing. It keeps asking me to update
Ryan, did you install this while un-rooted ? since you mention you tried the unroot and update method - which is what i tried too
ryan stewart said:
I was able to install this, it appears to have updated my build. I did run into some issues where it got mad because I had uninstalled the ASUS programs that it wanted to update but once I pasted those back in it ran fine (i of course then deleted them again).
Now I just need to clear this firmware thing. It keeps asking me to update
Click to expand...
Click to collapse
Just run the firmware and it will fail. Reboot and the notice will go away. How I did it on mine.
Can I use this if I'm running Prime 1.7 ?
ajamils said:
Can I use this if I'm running Prime 1.7 ?
Click to expand...
Click to collapse
No. This is only for people with rooted stock ROM version 8.6.5.6 who want to update to stock rooted 8.5.6.9
nolf3 said:
Ryan, did you install this while un-rooted ? since you mention you tried the unroot and update method - which is what i tried too
Click to expand...
Click to collapse
Rooted and with clock workmod
A couple of bugs I see, not sure if its because of my Xoom systemUI but when I mount a disk it says its mounted as read only but I can modify it and when I click on the SD card icon the pop up says "mobiledock firmware updating" instead of "sd card inserted."
Also, the auto and slider look wierd under the brightness options, white icons that dont match.
chuy08 said:
If someone can get me the WW package I can cobble something together. I won't be able to test however since I am on US.
Let me know.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/39328504/dlpkgfile.zip
CrazyPeter said:
http://dl.dropbox.com/u/39328504/dlpkgfile.zip
Click to expand...
Click to collapse
Bump, give that a shot. Let me know.
chuy08 said:
Bump, give that a shot. Let me know.
Click to expand...
Click to collapse
No Go...
Failed on CRC Checking of ApplicationsProvidor.apk
(running HTJ85B.WW_epad-8.6.5.7-20110730)
CrazyPeter said:
No Go...
Failed on CRC Checking of ApplicationsProvidor.apk
(running HTJ85B.WW_epad-8.6.5.7-20110730)
Click to expand...
Click to collapse
I see what I did wrong try that. Sorry bout this I am new at this Android stuff.
chuy08 said:
I see what I did wrong try that. Sorry bout this I am new at this Android stuff.
Click to expand...
Click to collapse
Just did a BeyondCompare diff between the original dpkgzip and the modded one, so I can understand what you did. Most of it makes sense (the stuff in the script).
But why is the binary blob file half the size?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bump...
Anyone know what the blob file is, what it does and why it's smaller? I don't want to screw up my working tablet, but I do want to try this out.....
CrazyPeter said:
Bump...
Anyone know what the blob file is, what it does and why it's smaller? I don't want to screw up my working tablet, but I do want to try this out.....
Click to expand...
Click to collapse
The blob is half the size cause its CWM.
I really like Nexus S boot animation, it's one of the most beautiful ones I've seen so I decided to mod it for note.
Preview:
(The actual animation looks better as the preview is in half the resolution.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: http://www.mediafire.com/?59yapyivu3oy1cg
Enjoy!
EDIT2: I have finally learned how to sign files so this fixed-signed version should flash reliably now
EDIT3: So, seems I was too quick there... The file flashed correctly the first time. But then when I tried again later I got error twice and then the third time it flashed... Not quite sure what's wrong - CWM is not exactly informative in its error messages. So if flashing fails just try again a few times!
Thank you!
Nice!
I don't usually change or care that much about boot animations but that is a really good looking one!thanks a lot for sharing mate
off to flashing
Mate I flashed you're mod and it's amazing!thank you very much
Can you tell me what files I have to delete to disable bootanimation sound? I tried bootsamsung and boot samsundloop in /system/media but wasn't successful
Thanks in advance
Sent from my GT-N7000
matius44 said:
Mate I flashed you're mod and it's amazing!thank you very much
Can you tell me what files I have to delete to disable bootanimation sound? I tried bootsamsung and boot samsundloop in /system/media but wasn't successful
Thanks in advance
Sent from my GT-N7000
Click to expand...
Click to collapse
There should be a file called 1_Power_on.ogg in /system/etc. Just make a backup of it then delete
Sent from my GT-N7000 using XDA App
verisae said:
There should be a file called 1_Power_on.ogg in /system/etc. Just make a backup of it then delete
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
Thanks a lot for the help mate
though its Poweron.wav that did the trick not the .ogg file anyways wouldn't have found it without you're help so thanks
Sent from my GT-N7000
I tried this. Installed via CWM, install went fine, but no change in boot animation.
I am on Rocket rom v18. Is this only supposed to work on stock?
Any help is appreciated.
oalex said:
I tried this. Installed via CWM, install went fine, but no change in boot animation.
I am on Rocket rom v18. Is this only supposed to work on stock?
Any help is appreciated.
Click to expand...
Click to collapse
Very sorry, I never actually tested the CWM file myself.
There was an error in the installation script which I have now fixed and re-uploaded the file: http://www.multiupload.com/SYYQBKHN60
It should now work fine, at least it did for me.
Original post edited.
piit79 said:
Very sorry, I never actually tested the CWM file myself.
There was an error in the installation script which I have now fixed and re-uploaded the file: http://www.multiupload.com/SYYQBKHN60
It should now work fine, at least it did for me.
Original post edited.
Click to expand...
Click to collapse
Tried to apply again and this time it gave error
E:Error in /sdcard/download/bootanimation-nexus-s-cwm-fixed.zip (status 0).
Installation aborted.
What other installation method can I use with the zip? You said you did not test it CWM so I guess you used some other means. Do you just rename zip to apk?
Anyway there is probably still some syntax errors that you left in there.
Thank for trying to help.
oalex said:
Tried to apply again and this time it gave error
E:Error in /sdcard/download/bootanimation-nexus-s-cwm-fixed.zip (status 0).
Installation aborted.
What other installation method can I use with the zip? You said you did not test it CWM so I guess you used some other means. Do you just rename zip to apk?
Anyway there is probably still some syntax errors that you left in there.
Thank for trying to help.
Click to expand...
Click to collapse
Ugh... That's strange, sorry for that! I tried flashing this file using recovery in CF-root LA3 kernel and it worked fine for me, not sure what the problem is :/
If you want to install manually, just put the bootanimation.zip file (contained in the bootanimation-nexus-s-cwm-fixed.zip file) and put it to /system/media using Root Explorer (or adb if you have it set up). Don't forget to remount /system read/write first.
problem since la4
hi this was working great (manually put in system/media) then i flashed la4, put in there again and it just loads stock animation every time, and if i delete stock it just loads blank, any ideas?
Which kernel do you use?
Androboyben said:
hi this was working great (manually put in system/media) then i flashed la4, put in there again and it just loads stock animation every time, and if i delete stock it just loads blank, any ideas?
Click to expand...
Click to collapse
Hi, as far as I know custom boot animations work with CF kernels and AbyssNote kernels (probably with most custom kernels but these two I have personal experience with).
They do not work with stock kernels.
Signed file reploaded
Hi,
I have finally learned how to sign zip/apk files so I have re-uploaded a signed CWM-flashable file that should work correctly at last.
Thanks for your patience
Piit
kernals......hmmm i need to do some more reading in the forums
I've only just wrapped my head round installing roms etc so not got a clue about the kernals.
I guess I accidentally flashed a compatible kernal the 1st time I ref lashed and this latest flash doesn't have a compatible one. Can I install a custom kernal with mobile Odin?
Androboyben said:
I've only just wrapped my head round installing roms etc so not got a clue about the kernals.
I guess I accidentally flashed a compatible kernal the 1st time I ref lashed and this latest flash doesn't have a compatible one. Can I install a custom kernal with mobile Odin?
Click to expand...
Click to collapse
Yes, Mobile Odin is ideal. Just click Kernel and select either a zImage file (found inside the CWM flashable files) or a tar file that contains the zImage file. Then click Flash firmware at the bottom.
I would recommend a CF-root kernel to start with - it's nearly stock so is the least likely to give you any trouble. Download the kernel according to your ROM base version from here: http://forum.xda-developers.com/showpost.php?p=20724234&postcount=5
Ah nice one. Thank you piit79 followed your steps and now have a new kernel........just gotta figure out what I can do with it now but hopefully I can get me boot animation back now
piit79 said:
Hi,
I have finally learned how to sign zip/apk files so I have re-uploaded a signed CWM-flashable file that should work correctly at last.
Thanks for your patience
Piit
Click to expand...
Click to collapse
Hi, can't flash it via cwm.. Got error message..
Sent from my GT-N7000 using xda premium
freyria182 said:
Hi, can't flash it via cwm.. Got error message...
Click to expand...
Click to collapse
Hi, yeah, don't quite know what it is! As mentioned in the first post it flashed fine when I was testing the last signed package. But then I re-flashed ROM and when I tried again it was failing. Anyway, when I tried again it would succeed on third or fourth attempt. Just try again until it flashes
piit79 said:
Hi, yeah, don't quite know what it is! As mentioned in the first post it flashed fine when I was testing the last signed package. But then I re-flashed ROM and when I tried again it was failing. Anyway, when I tried again it would succeed on third or fourth attempt. Just try again until it flashes
Click to expand...
Click to collapse
Thanks.. Will try again
Sent from my GT-N7000 using xda premium
Through a well executed chain of private messages I managed to get a hold of a shiny new leak for us S4 users, Don't know if it will help you AT&T users much, But I'd love it if it did. For now, this is for Canadian users only, and can be used (Confirmed with Bell, and Telus) with any carrier
Included in this package are a few things:
1) BL, AP, CP, and CSC files for Odin
2) Odin v3.09 to be used for flashing (Not confirmed to work with any other version, So why not have the latest? )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions for Flashing
Root: Latest version of CF Auto root HERE (Seriously, go buy that guy a beer. http://www.chainfire.eu/ )
As far as flashing the package goes, all files need to be put in their respective shots as per the screenshot, you may need to flash 2-3 times in odin to get the whole package in there, like with most custom -> stock transitions.
The updated bootloader is the only real bummer here, overall a very nice package, fully rootable, works with Wanam Xposed for any of those curious, with very little as far as incompatible modules I can see.
One key change I'm missing personally is the lack of adaptive auto brightness... Can no longer increment -5/+5 on your auto brightness setting
Anyway, enough about it for now, here is the package link. Screenshots will be posted in a few minutes.
https://mega.co.nz/#!h8pTnCZS!t2-PiSb5W9ZyNp7fct7WD_Pg_dnc-eZqtMvpsuKv_9Q <-- Now with 100% less pit file!
I know some people were doubting the legitimacy of this in the Canadian thread, but I just finally got permission to post the leak from my source, since it's not carrier specific, and doesn't tie back to any one specific person. Heh.
downloading right now, will install it asap.
Thanks a lot 0mega1
Interested in trying this out...wondering if anyone has noticed any bugs or general performance issues? Also is it responsive on the S4?
Thanks,
0mega1 said:
Through a well executed chain of private messages I managed to get a hold of a shiny new leak for us S4 users, Don't know if it will help you AT&T users much, But I'd love it if it did. For now, this is for Canadian users only, and can be used (Confirmed with Bell, and Telus) with any carrier
Included in this package are a few things:
1) BL, AP, CP, and CSC files for Odin
2) The appropriate PIT file for the Canadian 16gb model
3) CF Auto Root package for Odin(Latest version as of posting) -- HUGE Thank you to chainfire for all of his work. http://www.chainfire.eu/
4) Odin v3.09 to be used for flashing (Not confirmed to work with any other version, So why not have the latest? )
Instructions for Flashing
As far as flashing the package goes, all files need to be put in their respective shots as per the screenshot, you may need to flash 2-3 times in odin to get the whole package in there, like with most custom -> stock transitions.
The updated bootloader is the only real bummer here, overall a very nice package, fully rootable, works with Wanam Xposed for any of those curious, with very little as far as incompatible modules I can see.
One key change I'm missing personally is the lack of adaptive auto brightness... Can no longer increment -5/+5 on your auto brightness setting
Anyway, enough about it for now, here is the package link. Screenshots will be posted in a few minutes.
https://mega.co.nz/#!ghpAhaaK!eXjKiZvQy9aUvy54AhXXAl14DJGVrot1msb6XOUlhgw
I know some people were doubting the legitimacy of this in the Canadian thread, but I just finally got permission to post the leak from my source, since it's not carrier specific, and doesn't tie back to any one specific person. Heh.
Click to expand...
Click to collapse
dahlungril said:
Interested in trying this out...wondering if anyone has noticed any bugs or general performance issues? Also is it responsive on the S4?
Thanks,
Click to expand...
Click to collapse
Up until I hear otherwise it is literally running on two phones, aside from whatever there is internally.
I've had zero issues since I flashed it yesterday, and battery has been great.
Very nice. Thanks for uploading. Can someone please provide and upload a system dump of this ROM? Having trouble with my ext4.img extract tools since 4.3.
Thanks.
I noticed that the pit file isn't in the package anywhere!
dont use pit files unless you NEED a pit file.
quick way to bork your phone
always check the post count of the Uploader.
less than 200 ? I would not follow his instructions. And i would only flash his leak, if my post count was higher and I knew what to do without reading some "new guy's" instructions
TRusselo said:
dont use pit files unless you NEED a pit file.
quick way to bork your phone
always check the post count of the Uploader.
less than 200 ? I would not follow his instructions. And i would only flash his leak, if my post count was higher and I knew what to do without reading some "new guy's" instructions
Click to expand...
Click to collapse
OP probably took the files and infos from here: http://true-android.blogspot.ca/2014/03/i337mvlufnc1-android-442-kitkat.html
I don't care where he got it, my point is only experts should be flashing leaked firmware.
Or to put it simply if you need instructions, don't flash it.
Sent from my SGH-I337M using Tapatalk
I've installed this using Odin. Can't get the modem file to stick. I'm stuck on MK6 for baseband. Wifi doesn't work as a result.
Did a complete wipe of System, Cache, Dalvik and Data.
I've tried reflashing the modem file a few times but it's not sticking. I'm attempting a reflash of the entire ROM right now to see if that does the trick.
Edit: It stuck after a second flash. Wifi works now.
Relayers said:
OP probably took the files and infos from here: http://true-android.blogspot.ca/2014/03/i337mvlufnc1-android-442-kitkat.html
Click to expand...
Click to collapse
That's my ****ing screenshot. Are you for real? I can submit the full resolution one if you'd like.
I've leaked a full early release before...
http://forum.xda-developers.com/showthread.php?t=868829
That was the official went-to-public build for the Telus Fascinate... Same deal.
TRusselo said:
dont use pit files unless you NEED a pit file.
quick way to bork your phone
always check the post count of the Uploader.
less than 200 ? I would not follow his instructions. And i would only flash his leak, if my post count was higher and I knew what to do without reading some "new guy's" instructions
Click to expand...
Click to collapse
I fail to see how my post count indicated the quality of what the release. This isn't the first time I've posted a leak here, might be the last though... Apparently the content doesn't matter so much as who is doing the work nowadays.
Hey, I'm thankful for the leak.
So where is the .pit file in the package? Or can we flash this without the .pit?
Thanks!
aiton said:
So where is the .pit file in the package? Or can we flash this without the .pit?
Thanks!
Click to expand...
Click to collapse
You don't need the .pit file. The OP should remove that from the instructions. Otherwise it's running smoothly.
TLS2000 said:
You don't need the .pit file. The OP should remove that from the instructions. Otherwise it's running smoothly.
Click to expand...
Click to collapse
Oh, ok, thanks. And just another question, if we're not using the .pit file, we should also uncheck the repartition box? (because .pit files will only need to be used if a firmware update needs to change your partition layout). Or how did you do it?
Thanks for the info!
modem.bin
Is it possible to pull the modem.bin file from here? I am running another kitkat rom but with MK6 would like to try this one......
aiton said:
Oh, ok, thanks. And just another question, if we're not using the .pit file, we should also uncheck the repartition box? (because .pit files will only need to be used if a firmware update needs to change your partition layout). Or how did you do it?
Thanks for the info!
Click to expand...
Click to collapse
It fails for me Re-Partition checked or unchecked. Any suggestions?
thank you very much!
works great on I337M Telcel Mexico
ChantalCaron13 said:
It fails for me Re-Partition checked or unchecked. Any suggestions?
Click to expand...
Click to collapse
where does it fails ?