Hi there, phone screen remains black and no visuals after flashing rom, so I canrt see anything on screen or know what to do about it, pls help?
Details -
After flashing ROM from SD card via which seem to go well... ONLY that the screen is blanked out, no lights except the key lights, phone comes on, responds to touch by giving normal sounds like when I use flick the scroll lock and touch the screen etc (just because I know how the phone works) but problem remains that I cant see anything, so I cant even boot into recovery or download mode to flash again since its all black and dimly lit.
I have a B63M running Gingerbread 2.3.5 so I am not sure what model of HTC it falls under in case this question or similar has been asked already.
I was able to initially get into flash recovery using the mobile uncle tool which allowed me get into recovery, something that has been impossible using the stock recovery in b63m.
I backed up the ROM , cleared cache and daikvil cache then went on to flash ROM using an update.zip and then the touble I explained above.
This is a current situation pls I need help getting back up and flashing the right lattest rom for my phone?
Help me pls
xdadeem said:
Hi there, phone screen remains black and no visuals after flashing rom, so I canrt see anything on screen or know what to do about it, pls help?
Details -
After flashing ROM from SD card via which seem to go well... ONLY that the screen is blanked out, no lights except the key lights, phone comes on, responds to touch by giving normal sounds like when I use flick the scroll lock and touch the screen etc (just because I know how the phone works) but problem remains that I cant see anything, so I cant even boot into recovery or download mode to flash again since its all black and dimly lit.
I have a B63M running Gingerbread 2.3.5 so I am not sure what model of HTC it falls under in case this question or similar has been asked already.
I was able to initially get into flash recovery using the mobile uncle tool which allowed me get into recovery, something that has been impossible using the stock recovery in b63m.
I backed up the ROM , cleared cache and daikvil cache then went on to flash ROM using an update.zip and then the touble I explained above.
This is a current situation pls I need help getting back up and flashing the right lattest rom for my phone?
Click to expand...
Click to collapse
Guys I need help fast pls. My phone screen is blank after flashing thru sd card, now I cant see anything but it appears to still be working, I since it responds to touch with click sounds... help pls.
Have you probably try to go over adb to recovery?
sure... adb could see it
xdadeem said:
Hi there, phone screen remains black and no visuals after flashing rom, so I canrt see anything on screen or know what to do about it, pls help?
Details -
After flashing ROM from SD card via which seem to go well... ONLY that the screen is blanked out, no lights except the key lights, phone comes on, responds to touch by giving normal sounds like when I use flick the scroll lock and touch the screen etc (just because I know how the phone works) but problem remains that I cant see anything, so I cant even boot into recovery or download mode to flash again since its all black and dimly lit.
I have a B63M running Gingerbread 2.3.5 so I am not sure what model of HTC it falls under in case this question or similar has been asked already.
I was able to initially get into flash recovery using the mobile uncle tool which allowed me get into recovery, something that has been impossible using the stock recovery in b63m.
I backed up the ROM , cleared cache and daikvil cache then went on to flash ROM using an update.zip and then the touble I explained above.
This is a current situation pls I need help getting back up and flashing the right lattest rom for my phone?
Click to expand...
Click to collapse
dagger780 said:
Have you probably try to go over adb to recovery?
Click to expand...
Click to collapse
Thanks for your response, yes I have gone the adb route and I was able to see my device in adb but once I say adb reboot recovery or adb reboot download, it restarts and reboots but again I cant see the screen so I have no idea what to do next or what really is happening on screen.
Maybe if you know how to proceed once in adb, you can share with me, this is frustrating me?
Hey Everyone,
Recently the touchscreen on my HTC Sensation stopped working, including the capacitive buttons. I pulled the battery to reset it (several times), but still the problem persisted. I then though that maybe I should do a full wipe and reflash my ROM (CM10.1 AOSP 4.2.2 Jellybean [KANG]) but I have CWM Touch installed and therefore can not achieve this from the phone. I then searched for ways to flash the ROM from the PC through adb, but haven't had much luck at finding a precise step-by-step guide on how to do this. I searched through XDA and found a thread outlining a 'foil trick' to fix a potential grounding problem, however this did not resolve the issue.
Question 1: Is this (most likely) a digitizer issue?
Question 2: If not, is it possible to flash CWM Recovery (not Touch) over the top of the Touch version FROM MY PC so that I can reflash my ROM?
Question 3: If not possible, can someone please outline the steps to be taken to wipe and flash a ROM FROM MY PC?
I have attempted to connect my phone to my PC and flash the ROM using UniFlash, but my PC does not recognise my phone as being connected. I have made sure that the drivers are installed and HTC Sync is uninstalled, but it still does not recognise the phone being connected. Cannot check if USB-Debuggung is turned on as I cannot use the touchscreen.
Anything else I should try?
Thanks,
Matt
Edit: the screen itself lights up, I can receive texts, calls, etc. but I cannot actually interact with the phone due to the touchscreen issue
Hi yh id say ul need new digitizer, they cheap on ebay. Anyway if ur s-off u can use fastboot commands to flash non touch recovery. go here
http://www.clockworkmod.com/rommanager
Download non touch recovery (rename file to recovery.img)
Then go here
http://forum.xda-developers.com/showthread.php?t=2317536
Setup adb & fastboot
Once uv setup everything, put recovery.img in the fastboot folder then boot ur phone into fastboot mode (turn off phone then press n hold volume down + power then select fastboot) connect to pc and now shoud say fastboot usb. Now open command window from fastboot folder (shift right click, open cmd window here) then type
fastboot flash recovery recovery.img
U now should have non touch recovery
If im honest, if ur digitizer is broke then a full wipe and fresh flash of rom wont make a difference, but u can try.
You can try this thread aswell for some other fixes
[FIX] [UPDATED] Touchscreen issues
These fixes didnt work for me, i actually put a small piece of rubber on mine and worked perfect. see pic
Sent From My HTC Sensation
soloman56 said:
Hey Everyone,
Recently the touchscreen on my HTC Sensation stopped working, including the capacitive buttons. I pulled the battery to reset it (several times), but still the problem persisted. I then though that maybe I should do a full wipe and reflash my ROM (CM10.1 AOSP 4.2.2 Jellybean [KANG]) but I have CWM Touch installed and therefore can not achieve this from the phone. I then searched for ways to flash the ROM from the PC through adb, but haven't had much luck at finding a precise step-by-step guide on how to do this. I searched through XDA and found a thread outlining a 'foil trick' to fix a potential grounding problem, however this did not resolve the issue.
Question 1: Is this (most likely) a digitizer issue?
Question 2: If not, is it possible to flash CWM Recovery (not Touch) over the top of the Touch version FROM MY PC so that I can reflash my ROM?
Question 3: If not possible, can someone please outline the steps to be taken to wipe and flash a ROM FROM MY PC?
I have attempted to connect my phone to my PC and flash the ROM using UniFlash, but my PC does not recognise my phone as being connected. I have made sure that the drivers are installed and HTC Sync is uninstalled, but it still does not recognise the phone being connected. Cannot check if USB-Debuggung is turned on as I cannot use the touchscreen.
Anything else I should try?
Thanks,
Matt
Edit: the screen itself lights up, I can receive texts, calls, etc. but I cannot actually interact with the phone due to the touchscreen issue
Click to expand...
Click to collapse
I had same problem..
remove the battery and give external voltage to battery pin on phone via usb cable from PC ... Mine one is works this way. coz USB port is broken I tried to charge my battery externally. Ultimately I got my touch screen back
jmcclue said:
Hi yh id say ul need new digitizer, they cheap on ebay. Anyway if ur s-off u can use fastboot commands to flash non touch recovery. go here
http://www.clockworkmod.com/rommanager
Download non touch recovery (rename file to recovery.img)
Then go here
http://forum.xda-developers.com/showthread.php?t=2317536
Setup adb & fastboot
Once uv setup everything, put recovery.img in the fastboot folder then boot ur phone into fastboot mode (turn off phone then press n hold volume down + power then select fastboot) connect to pc and now shoud say fastboot usb. Now open command window from fastboot folder (shift right click, open cmd window here) then type
fastboot flash recovery recovery.img
U now should have non touch recovery
If im honest, if ur digitizer is broke then a full wipe and fresh flash of rom wont make a difference, but u can try.
You can try this thread aswell for some other fixes
[FIX] [UPDATED] Touchscreen issues
These fixes didnt work for me, i actually put a small piece of rubber on mine and worked perfect. see pic
Sent From My HTC Sensation
Click to expand...
Click to collapse
Thank you for your reply, your instructions about installing CWM Recovery were incredibly straight forward and made the process of re-flashing my ROM very easy. Unfortunately, re-flashing my ROM didn't help (wasn't expecting it to, in all honesty) so it looks like I will have to replace the digitizer Hopefully this relatively cheap fix will solve the problem. The thanks button has been pressed
Matt
soloman56 said:
Thank you for your reply, your instructions about installing CWM Recovery were incredibly straight forward and made the process of re-flashing my ROM very easy. Unfortunately, re-flashing my ROM didn't help (wasn't expecting it to, in all honesty) so it looks like I will have to replace the digitizer Hopefully this relatively cheap fix will solve the problem. The thanks button has been pressed
Matt
Click to expand...
Click to collapse
Yh didnt think it would either. Did u try the last link to touchscreen fix? Theres a couple of things there u can try, also the pic i posted, u could try that too. It fixed my touch screen problem. Anyway i know off ebay u can get a digitizer for no more than 20 euro, i baught one off there for my desire s for 10 euro and its perfect, they fairly easy to change urself. I did my own with no problems, just make sure the seller gives 3m double sided tape with it so u can stick the digitizer to the lcd.
jmcclue said:
Yh didnt think it would either. Did u try the last link to touchscreen fix? Theres a couple of things there u can try, also the pic i posted, u could try that too. It fixed my touch screen problem. Anyway i know off ebay u can get a digitizer for no more than 20 euro, i baught one off there for my desire s for 10 euro and its perfect, they fairly easy to change urself. I did my own with no problems, just make sure the seller gives 3m double sided tape with it so u can stick the digitizer to the lcd.
Click to expand...
Click to collapse
Yeah I tried the things in the link and what you suggested in your picture but nothing worked. I pulled my phone apart and I'm going to pick up a new digitizer (and tape) tomorrow. Hopefully that'll sort everything.
Matt
I replaced my digitizer with no problems. Or so I thought. My phone does not turn on! Battery indicator shows that the battery is recharged, so this is not the issue. Everything seems to be plugged/clipped into place. Could I have placed tape (3m sticker) over something important without realising it?
Any ideas?
Matt
What happens when the phone is off then u press power button? Does it vibrate as if it turns on?
Take off the back battery cover n try turn it on without the cover, if nothing then i suppose ul have to take it apart again and check if everything is connected
jmcclue said:
What happens when the phone is off then u press power button? Does it vibrate as if it turns on?
Click to expand...
Click to collapse
+1.
How are you going with this? Does it vibrate, does it not make HTC boot music? I'm wondering if the screen is hooked up properly.
Hey guys, I really need your help there : a friend of mine asked me to install him Miui on his One S c2. I did it, but after a few days, he gave me his phone back : the screen never "lights", it never shows anything, even the backlighting is down. I tries to reboot it in bootloader with adb : same here, nothing up ! The rom was working for like 3 days, but this phone is hold and maybe the screen has just died.
I have tried to restore it with a RUU, now the screen doesn't starts neither but on top the usb debuging is turned off and i can't start it has i can't see anything ^^ So i can't use adb anymore...
Any idea ? Software or Hardware issue ?
Thanks to help me fast ^^
Any idea ? :/
Hello,
Yesterday night i broke my beloved one plus one with the door of my car, the screen is cracked up but the LCD Display still work and show everything; the problem is that the touch detection is dead, i cant access to the phone through my PC since the phone have a pass that lock the memory until it is unlocked
My phone is rooted, but my recovery is TeamWin TOUCH recovery and well the touch doesn't work :/
I am kindda clueless and i really hope one of you might have the solution for me, i have a really important data for study/work as long as photo and part of my live into this phone i'll be devasted if i were loosing all this
I am waiting for any proposition you may have
Thanks
PS: Does anyone know how much would it cost to repair ? Lcd work but i think i saw a leak so it wont last long
This is what i am thinking about right now:
Flashing a new non-touch recovery via fastboot mode
Open the ADB menu and make and ADB backup if possible
Last time i did an ADB it was with the phone fully booted so i don't know if it is possible from the recovery
Also i could open the recovery and access the file from there ? does it bypass the code protection it have on normal boot ?
so i decided to root my unlocked htc one s, i've tried lots of one click root apps like kingoroot and others but none of them worked. so i decided to use framaroot. so framaroot didnt work too and i got really pissed off, and i accidentally pressed a button which was saying this: execute script/sd card/custom and my phone restarted. i thought it would boot normally and i would use phone normally but i saw that lockscreen ring was gone. now i cant unlock my phone but it works inside really well. i mean facebook notifications and missed calls are appearing on upper screen part (forgot how its called the place where clock battery icon and others are displayed, also forgot to mention that i locked my bootloader before trying framaroot because i thought something bad would happen to my device) when i first tried to root my htc one s it always got stuck on entering recovery screen, but i could normally use my phone. no most of the times my phone wont even turn on, i mean when i trie to it manually goes to bootloader screen, i hardly manage to boot my phone normally but still without lockscreen ring. also when i try to connect it my pc i get windows error. i tried updating drivers and it didnt work. also my phone is 2yrs old so i cant retutn it to htc with warranty, also screen is little broken but can still use normally. pls anyone help me if you can :crying::crying::crying::crying:
I am not HTC expert, but at this point you should could try to get S-OFF, HBOOT 2.16 and upgrade firmware (link in my other thread in this section) in order to flash latest roms and get a clean install