Database Info

[Q] HELP! I cant boot my device after updating to froyo 2.2 vibrant

So i followed i guide to install the froyo 2.2 update to my samsung galaxy s vibrant tmobile version.
my issue all seemed to go fine till it rebooted.
this is what i used
Odin 3 v1.0
S1_ODIN_20100512.pit
i9000XXJP2 Firmware
when it boots it goes into recovery utils
says enter: ok key select with vol up or down
i cant get past this screen i cant click ok
at the bottom it says update media. please wait
e:Can't mount /dev/block/mmcb1k0p1
(invalid argument)
e:copy_dbdate_media:Can't mount SDCARD
your storage not prepared yet, please use UI me nu for format and reboot actions
copy default meda content failed
What should i do now it wont boot?? Thnaks

[Q] PLEASS !HELP! HELP! moto DROID 2 E:can't open /cache/recobery/com

please i need help with my MOTOROLA DROID 2 i had rooted my droid like 2 months ago, at that pint was everything oK. but then i looked on room manager for updates and i found the that says OTA and at that point i had installed gingerbread room on my device everything was good but when i was downloaded the file it stopped without a reason and i started to dowload again this time was complete and when i TRIED TO INSTALLED IT THE PHONE SHOW
This message:
Android sistem recovery<3e>
use volume up/down to highlight and camera to s
reboot sistem now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E:can't open /cache/recovery/command
WHEN I APPLY SDCARD:UPDATE.ZIP
IT SHOWS
- -install from sdcard. . .
. . .finding update package. . .
openin update package. . .
verifying update package. . .
E:failed toverify whole-file signature
E:signature verification failed
installation aborted
please help me

Please flash any other recovery because you are in stock recoveey
Forever living in my Galaxy Ace using XDA App

how do i flash it
can you tell me how do i flash mi phone on the way that you say

i don't know how to do anything with my droid cause i cant turn it on and when i plug it un all what it does is shows the big letter of motorola the "M" AND I HAVE TO GLUG ITIN AND THEN TRY TO GO RECOVERY MODE AND IT JUST SHOW THE TRIANGLE AND THE"!" AND I CANT GO TO THE RECOVERY MODE THE WAY THAT IT SUPOSSE TO DO IT AND WHEN I PRESS THE LETTERS AROUND THE "Z" IT SHOWS android sistem recovery please help me

Please use the Q&A Forum for questions Thanks
Moving to Q&A

My I9003 Is Dead...After Flash

My I9003 Is Dead...After Flash
after i flash I9003JPKP5 all is done but phone run to 3e recovery
and show this error message.
E:can't mount/dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:can't mount SDCARD
your storage not prepared yet.please use UI menu for format and reboot actions.
copy default media cantent failed.
i try to reboot but that phone wont go in UI menu...
now keep restart

Just reflash using odin following insturctions closely. Its a soft brick, nothing to worry about.
Cheers
Sent from my i9003 powered by Cyanogenmod 7

ngagegames said:
My I9003 Is Dead...After Flash
after i flash I9003JPKP5 all is done but phone run to 3e recovery
and show this error message.
E:can't mount/dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:can't mount SDCARD
your storage not prepared yet.please use UI menu for format and reboot actions.
copy default media cantent failed.
i try to reboot but that phone wont go in UI menu...
now keep restart
Click to expand...
Click to collapse
Here's a step by step tutorial on how to recover a soft bricked I9003

Your storage not prepared yet
I am getting the same error message after flashing to xxkpe, is there a fix for this?

redcarullo said:
I am getting the same error message after flashing to xxkpe, is there a fix for this?
Click to expand...
Click to collapse
facing the same problem...pls help
i dont know my base number also..

http://plusandroid.posterous.com/recover-a-soft-bricked-galaxy-sl-gt-i9003
Have you all tried this tutorial?

stuck on sumsung logo
i can enter into download mode with simple vol down+ok+power...i also flashed it with xxkph (i dont know my base model number)..but still same stuck on sumsung boot ... and error like can't mount sdcard

You guys should try this....hope it helps.
http://forum.xda-developers.com/showpost.php?p=26505576&postcount=1295
Don't forget the thanks button

Micromax funbook keeps booting into recovery - help

okay, so, i tried to install CWM on my micromax funbook P255 using Novatools or something.
and now, it keeps booting into recovery (v5.5.0.4 for SmartPad 907c)
and it gives this log below -
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
i've tried flashing a new recovery
when i do 'adb devices', it shows my device in recovery
when i do 'flashboot devices' it doesn't show my device at all
when i try to 'flashboot flash recovery recovery.img' it is stuck on waiting for device.
there's no external SD card yet, but I have a spare one which I tried
I put the recovery.img in a 'newzip.zip' and put the SD card into my tablet, and then tried to install the update from the .zip, but it said 'installation aborted'
i just got this tablet yesterday, i NEED to fix this by myself anyhow!
i've rooted my HTC One V before, so I do have basic rooting experience.
I just want to get my tablet to work, f*ck the root and recovery, just anyhow it can functional normally!
also, there's a reset pinhole at the back, but i don't think it's working, i put a pin in there and nothing happened at all..

help
hey i am having almost the same problem
i have micromax funbook P255
i wanted install custom ROM but i first flashed cwm recovery (cwmics.rar)
when it booted to the recovery, the volume up and down keys are not working only power button for selecting
"reboot" option is highlighted and when i press the power button it shows the boot screen and again comes to the recovery
it is also showing at the bottom
E: can't mount /cache/recovery/ command
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
WHY IS THIS HAPPENING??????????
PPLLEEAASSEE HELP ME FROM GETTING OUT THIS HELL...FOR GOD'S SAKE...!!!

help pls
same problem here.
why the developers then post these kind of recoveries without checking.
feeling very bad.helpless

OK, reflash your stock firmware using live suite. You can get your Micromax P255 stock rom from this link- can't provide link because i am a new memberjust google android 4.0.4 stock rom for micromax funbbok p255.Then click the first link . Scroll down to the bottom and you will see the Mcromax P255 rom . Just download it.You get A zip File. Open it .It contains Live suite and the rom. how to use Live Suite ? Google it .
I had this problem.Fixed it yesterday using this method

This..is a common type of error with the micromax devices with cwm...which often results into imperfect flash.
Your device might be going in boot loop...
Solution;
Open the flashing software(i hope you would be using spreadtrum flashing software;Research Downloader) you are using open the stock image(To find yours google"Micromax all Stock Roms")
Connect your device randomly between vibration ...
You will observe that your computer will load the drivers then suddenly your phone will reboot
Identify the time driver loads ...
Run the system flash software though drivers aren't identified ...
Hold on the flash key(look up on google each set has different pattern) pattern of your phone and plug in cable(iam assuming that usb cable can be used to flash many other standard cable are used i had to cut the supply wire for mine to mske it flashable) at random times it will work.
PRESS THANKS If I was of any help.
Sent from my Micromax A65 using XDA Free mobile app

As of now there is no cwm recovery compatible vid our p255 ..but if u jus want to use ur tab den flash p255 stock firmware from tabletguru website....
Plzzz hit thnx if i helped

Avoiding errors when installing Android IA on Samsung XE700T1C

Like a lot of others I've was repeatedly getting the following error when attempting to install the XE700T1C Android IA image -
fatal: assertion failed bootable/iago/plugins/gummiboot.c:gummiboot_execute:154 'efibootmgr encountered an error (status 100)
[email protected]:/#
This is related to the secure keys of the hardware and the EFI boot loaders which are used to install Android IA.
To install sucessfully, select the MokManager option from the boot menu and select to 'Import hash from disk' - choose the bottom option then browse to the BOOT/EFI folder and select to trust each of the .EFI files - when prompted press 0 then Y to import the keys.
After this the installation will happen without the error.
Hope this helps anyone getting as wound up by this error as I've been.
Cheers.

catmand0 said:
Like a lot of others I've was repeatedly getting the following error when attempting to install the XE700T1C Android IA image -
fatal: assertion failed bootable/iago/plugins/gummiboot.c:gummiboot_execute:154 'efibootmgr encountered an error (status 100)
[email protected]:/#
This is related to the secure keys of the hardware and the EFI boot loaders which are used to install Android IA.
To install sucessfully, select the MokManager option from the boot menu and select to 'Import hash from disk' - choose the bottom option then browse to the BOOT/EFI folder and select to trust each of the .EFI files - when prompted press 0 then Y to import the keys.
After this the installation will happen without the error.
Hope this helps anyone getting as wound up by this error as I've been.
Cheers.
Click to expand...
Click to collapse
Hello,
i've found a solution. Problem is AI installer can't add boot entry in EFI, but all necessary files are stored in right place. All you need is a EasyUEFI 1.8 to manually add boot entry into EFI Boot Mgr.
After install an run program just select "Create", choose type as "Linux", enter boor entry name "Andoid", select partition with "combobox". After that select ".efi" file in bottom file chooser (gummiboot.efi) it must be in "/" of EFI Partition.
Next and last what you need is select that record to boot first.