Related
Hi all
I was upgrade my Jasjar by mistake with jam rom, after upgrading my Jasjar didn't work and the screen didn't show any thing (black screen). Please I need help, if any one can solve this problem give me the solution.
Hi!!!
Take it easy.
Trye to see if the device can go to "bootloader" press "camera"+"on/off"+sof reset.
IF you can go to "boot loader", see the wiki in this forum.
Me too have the same problem, but i was enable to fix-it.
Remove the batery form device, until you find the solution, I think tat you can not charge the batery.
(sorry, by not making links, but I am Flashing my Universal)
Good luck
Thank you, my friend
I tried many times to go to boot loader but I can't, any how I am waiting for the solution.
try this . brightness button + power button + soft reset buton (using ur styles ofcourse) lol . then u enter bootloader the hard way i guess. from there connect the usb althou ur active sync may or may not detect the connection . but on ur fone the serial link wud change to USB . then try flashing a shipped rom 1st then . after that do CID unlock (that if u haven done it yet with ur fone). then flash any rom of ur choice
Look in Wiki... there are many methods =) Wiki rules!!
it saved my exec.. =)
i have the same problem and i treid this way it does not go some one told me that to charge the battary by another jasjar but right now i am not able to find one els to charge the battry..
also i did chat with imate support and they advice me to send it to the service center and i don't know what to do.
even wiki does not have a soultion for that.
I think the bootloader is broken and need to be reinstall but how????
of course you've got this bad rom form ce4ara.com right
it's soo bad
well how can the bootloader b fukd man ?? lol anyways here r the two bootloader editions the instructions to which u can find in universal wiki . here is the link ::
http://wiki.xda-developers.com/index.php?pagename=Universal_Bootloader
well when u connect ur fone in bootloader mode to the pc do u c the "serial" on the top change to "usb" ?? if so go here ::
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
get the mtty utility and do as instructed
ps:: dumb azz customer care knows jus two things if u ask them anything about a screwed jasjar. :: install new shipped rom or get to service centre lol. not any other excusehas added to that list as of yet
aahmed12 said:
of course you've got this bad rom form ce4ara.com right
it's soo bad
Click to expand...
Click to collapse
try stable roms and not beta version to test ur fone efficiency for instance for start install jus shippd rom as they are the most stable with almost no bugs ! so always wen u have a broken jasjar n need to b reconstructed innercorely lol use shipped rom. thats wat i do ales lol
I tried these both links before the problem there is no serial or USB on the screen it's completly black no even when you connect it to usb gives u message on computer unrecoginze device then how to upgrade or reinstall bootloader??
with MTTy says usb device not found frist i have to run bootloader again on my jasjar frist to do what writen in wiki
does ur fone charge up by the wall charger n the charging led turns red? ? mayb ur fone not properly charged or so to even enter bootloader ??
I tried all mouthed but I can't fix it, last tried I toke it to the technician and he said the board was damaged.
Thank you,
Sorry for that but first try to charge you battary by another jasjar it might work
okay man .. if u didnt already solve ur prob
i had that prob b4 & here's the steps i took ( i thought i damaged my chip 2 )
1. disable usb connections in active sync 4 now (or remove it from ur pc)
2. get into boot loader by pressing backlight botton+power botton .. dont press soft reset
3. connect ur USB
4. open the MTTY utility .. download it from the wiki if u dont have it
5. press on USB botton on the right of the MTTY window
6. on the window that appears press (enter) ... a wiered word will appear .. press enter again
7. write task 28 55aa (just write it dont copy or it wont work) and press Enter
8 . write task 28 55aa again and press enter
now u can close the MTTY and setup a new rom on ur device .. just choose a proper 1 from this forums
these instructions worked 4 me & i hope u find it useful if u didnt already solved ur problem
jasjar problem
I completely have the same problem with my jasjar and non of these steps worked with me cuz it wont get in a bootloader
(It wont startup at all)
my problem is not solved yet.
plz haw can i flash my phone i have lg flash pakage and firmware v21a ... i try to pute it inti emergency mode but i dont know haw also my pc dont detect the phone wile i instaled drivers -_- haw can i solve it plz urgent
Re: [Q] How to push deodexed app and framework in the phone
Try this if you have any question ask
http://forum.xda-developers.com/showthread.php?t=1629307
Sent From LG-P880
Try Use THANKS Button If I Helped
okey . can u tell me haw pute my phone in emergency mode?
Remove every thing (battery , SD card ,sim ...)
Now your phone in your hands without any thing .
1- Press vol+ and keep holding ...
2-Now you are holding vol+ ,, connect usb to PC .
3- Now you are holding and the phone is connected ,,, insert battery and keep holding for ~3 seconds .
Now you should see korean words with two arrows .
Sent From LG-P880
Try Use THANKS Button If I Helped
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset
engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no
hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/
What if i do not know the IMEI nos?
very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.
no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz
xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )
Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:
my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Dave18392 said:
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Click to expand...
Click to collapse
I'll help, but I really can't understand a word you've written...
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Dave18392 said:
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Click to expand...
Click to collapse
restore the phones system backup
jime1 said:
restore the phones system backup
Click to expand...
Click to collapse
hw to do it wn my fon s bootlokd n nt swichin on?
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
pl help me mate..
anyway for me to get th stock rom for micromax a88
Dave18392 said:
hw to do it wn my fon s bootlokd n nt swichin on?
Click to expand...
Click to collapse
boot into recovery by pressing VOL UP + VOL DOWN + POWER to get into recovery mode
Dave18392 said:
pl help me mate..
anyway for me to get th stock rom for micromax a88
Click to expand...
Click to collapse
Check this link....
http://skyneel.blogspot.com/2013/06/Stock-Rom-V1-for-Micromax-A88-Canvas-Music.html
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Dave18392 said:
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Click to expand...
Click to collapse
Have You flashed stock rom?
Sent from my Explorer A310e using xda app-developers app
yes dude,...instaled it.
I flashed the stock rom and its getting switched on now...but it shows invalid IMEI and no range is coming..i gues i dont ve th back up also..
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Dave18392 said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Click to expand...
Click to collapse
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
jime1 said:
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
Click to expand...
Click to collapse
I asked that question in general and i ve done it..evrythin is working fine now...thought a of u can help me out.thats y asked
If the problem/issue is solved.. Then rename your (this) thread /post as SOLVED.. So that from Now on it can help others.
Also give a suitable title to this issue related thread rather than just [Q]..:beer:
Sent from my Explorer A310e using xda app-developers app
Guys I kinda noob so if u can tell me step by step it will b a gr8 help I read all most al d post but need to knw wht ROOT n ROM is n hw I can enhace d sound on my xperia c handset cause its sound realy sucks n I have a problm with my radio too I cant connect to any of d radio stations. I bought my handset fr dubai
Ty n plz do help me
itsvjsingh said:
Guys I kinda noob so if u can tell me step by step it will b a gr8 help I read all most al d post but need to knw wht ROOT n ROM is n hw I can enhace d sound on my xperia c handset cause its sound realy sucks n I have a problm with my radio too I cant connect to any of d radio stations. I bought my handset fr dubai
Ty n plz do help me
Click to expand...
Click to collapse
Root your device using this guide
http://forum.xda-developers.com/sony-xperia-c/help/how-to-root-android-device-easiest-t2837947
iSiddharth said:
Root your device using this guide
http://forum.xda-developers.com/sony-xperia-c/help/how-to-root-android-device-easiest-t2837947
Click to expand...
Click to collapse
Ty so much fr link bro can u hep me a little more after rootin my device hw can I Instal viber4 or any other sound inhancing app to increase its sound.
itsvjsingh said:
Ty so much fr link bro can u hep me a little more after rootin my device hw can I Instal viber4 or any other sound inhancing app to increase its sound.
Click to expand...
Click to collapse
Try these links
http://forum.xda-developers.com/showthread.php?t=2155192
http://forum.xda-developers.com/xperia-z/themes-apps/mod-extra-volume-boost-increase-t2302748
sidd!!
thing is tht i rooted my xperia c using frme root so tht i can put xperia z1 or z2 rom d problm im facing is when im rr-booting my phn in touch cwm mode its showing an error with android sign "no command". I need to take back up of my phn 1st n fr tht i installled mkt tool frm play n recovery.img
can u plz guide me hw to get rom installed n take my current back too.
how to take d backup of my phn and instal d rom??
itsvjsingh said:
how to take d backup of my phn and instal d rom??
Click to expand...
Click to collapse
Install CWM (i.e. clockworkmod recovery) on your phone using this guide
http://forum.xda-developers.com/showthread.php?t=2696987
Then in CWM you will find an option of "Backup and Restore">> In that option you will find "Backup">> Select this option and backup will be made
Backup of your phone will be made in the SD Card.
---------- Post added at 02:11 PM ---------- Previous post was at 02:03 PM ----------
itsvjsingh said:
sidd!!
thing is tht i rooted my xperia c using frme root so tht i can put xperia z1 or z2 rom d problm im facing is when im rr-booting my phn in touch cwm mode its showing an error with android sign "no command". I need to take back up of my phn 1st n fr tht i installled mkt tool frm play n recovery.img
can u plz guide me hw to get rom installed n take my current back too.
Click to expand...
Click to collapse
make sure that you install a ROM which is made for Xperia C as it has locked bootloader and will only install those ROMS
There are currently 3 ROMs available for Xperia C (which are posted on XDA-Forums)
1) Xperia-Z-ized ROM : http://forum.xda-developers.com/showthread.php?t=2705091
2) Dark Xperia Z2 ROM : http://forum.xda-developers.com/showthread.php?t=2739724
3) Me! ROM : http://forum.xda-developers.com/showthread.php?t=2729350
4) I am working on the next rom !
how to boot ur phone in clive touch recovery as d image shown
4.Boot into recovery (turn off your xperia properly, now press "power" + "volume down" untill u boot into revcery)
when im doing dis in getting an error as no command
itsvjsingh said:
how to boot ur phone in clive touch recovery as d image shown
4.Boot into recovery (turn off your xperia properly, now press "power" + "volume down" untill u boot into revcery)
when im doing dis in getting an error as no command
Click to expand...
Click to collapse
I would say that you use CWM... It is best recovery ever :good:
**Root your device (Link provided above)
**Download "recovery.img" (attached below) and then place it in your internal memory
**Install "MobileUncleTools" (attached below) and install it
**In MobileUncleTools go to "recovery update" and select the recovery.img
**Wait for some time and your device will automatically restart and CWM will be started
( if you are on 16.0.B.2.16 then you have to do this process 2-3 times, I don't know why this is happens)
If later you want to open recovery then use the method : press "power" + "volume down" until u boot into recovery
Sidd
In tht recovery update im getting lot of cwm files which 1 to select
Sidd!!!
1 last question after Putin z1 rom an rootin my device wil I get updates fr Sony fr d system n fr d other apps installed??
Ty fr elpin me loads of love
itsvjsingh said:
Sidd!!!
1 last question after Putin z1 rom an rootin my device wil I get updates fr Sony fr d system n fr d other apps installed??
Ty fr elpin me loads of love
Click to expand...
Click to collapse
Installing ROMs, Rooting the device and unlocking the bootloader are considered under the rooting and hence void your warranty. After doing any of these you will not receive system updates from the Settings>>About Phone>>Software Update menu. But you can update your device using "Sony PC Companion" And apps will be updated from Google Play Store so it is no problem, you will receive updates for the apps installed.
And you may ask as many questions as you want there is no problem... This forum is made for this only :good: