Database Info

[ROM][Beta][Final] CM7 Android For Triumph [Tickerguy Edition; kernel: Mine] 11/19

PLEASE NOTE THE FOLLOWING:
This is BETA code. Some things do not work and you should assume there will be BUGS. I am not responsible if you brick your phone with this or any other firmware. You are your own warranty once you start loading firmware. Please do NOT post about anything that's in the "broken" list; I will ignore you if you do.
If it's not listed as working or broken below then that particular feature has likely not been tested at all.
Kernel: Mine, built from Motorola's released source. Includes Smartassv2 governor and ext2, ext3 and ext4 filesystems plus MSS clamping support.
Codebase and credits: Originally sync'd from Isaac's work, heavily modified at this point. Isaac deserves the credit for getting the base code to boot and getting me interested in hacking on it.
What's working
Pretty much everything, except what's listed below.
What's known BROKEN:
Hdmi non-functional
The is an interrupt storm if you enable both Wifi and Bluetooth at the same time. Don't.
Front camera does not mirror snapshots or video, but does on preview.
Occasional force-closes when switching cameras front-to-back.
What's Intermittent: Nothing.
Included Apps:
Essentially nothing. Load GAPPS for Google apps (yes, you want them) by flashing these AFTER you flash the ROM:
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip - Base Google Apps
http://goo-inside.me/gapps/gapps-gb-20110828-newtalk-signed.zip - Google Talk (if you want it)
NOTE: You cannot provision on the CM7 ROM (the "Activate" apk, if you grab it from the Triumph, will not work - it appears to run, but does not function.) You must be provisioned using the stock ROM before you load this code. I am attempting to fix that, but am not confident it can be fixed as it appears to want things in the framework that I have no way to discover or duplicate.
To install:
1. MAKE A NANDROID BACKUP! I cannot emphasize this enough - and make sure you keep that backup somewhere SAFE. Most notably there is no way to activate the phone on CM7 at this time, and there may never be. If you need to change your phone number or similar you need to swap back to stock firmware. If you lose the ability to do that you will be pissed. Consider yourself warned.
2. Place the file in the below post on your SD card in the root.
3. Boot to clockwork by turning your phone off and then hold BOTH volume buttons while pressing POWER. Release power when the phone vibrates and continue to hold both volume rockers until Clockwork comes up.
4. Important: Clear the cache and data ("factory reset") If you fail to do this CM7 will blow up on boot unless you are coming from previous RECENT build. You've been warned! If you're coming from an OLD build (or stock) format /system as well.
5. Select the ZIP file from the SD card (about halfway down on the top screen of Clockwork to get to that menu, then the first entry and point at it.)
6. Commit the update.
7. If you formatted /system (and if you're coming from STOCK) flash GAPPS (below; the first is the standard GAPPS apps, the second is Google Talk) using the same procedure in #5 and #6.
On first boot it will take about 2 minutes before it comes up; if you have lots of apps it may take longer. Provided you see the little CM7 guy with the rotating arrow, it's working - be patient.

Current code download link(s)
11/19 - vB.08 http://www.mediafire.com/?bhmitbx7weqf8g2 - Wifi Tethering / FINAL
11/06 - vB.07 http://www.mediafire.com/?eqdfo7ktmtuq281 - Haptic soft keys / light sensor
10/30 - vB.06 http://www.mediafire.com/?qj28ip6o09j1ai6 - Screenshot / restore GB Launcher
10/29 - vB.05 http://www.mediafire.com/?rjf20vb74oc0irb - Cleanup release; see below
10/26: http://www.mediafire.com/download.php?wwj1l5lzjb4glfy - Wifi/PRL/Prox Sensor
10/22: http://www.mediafire.com/download.php?nssofns6sljfj33 - CIFS/Prox Sensor/USB Tether
10/16: http://www.mediafire.com/?jg5matblx1d7bq2 - First BETA
10/12: http://www.mediafire.com/download.php?wtwvx80ccsz8vfi - Last ALPHA build
Note: Loading this version requires a Clockwork that understands ext4. The following version is recommended: http://www.mediafire.com/download.php?acpcd9xtlpzqge1

Expected to be fixed in the NEXT build -
Work continues on the list in the first post along with tracking bugs that have been posted to GitHub.
Change Log (tracking as of 9/5), reverse chronological order:
11/19:
Wifi tethering is now built into the code (from Isaac's work); untested other than the fact that it does come up and is believed working. No other changes. FINAL RELEASE.
11/06:
Haptic feedback on soft keyboard now works and is treated as any other "virtual key" off the screen. Kernel modified to multiply light sensor readings by 30; this "sorta" aligns them with actual lux values (not really, but I don't have a light box that can get me a closer integration formula) and makes possible the CM7 options for "jump" settings, hysteresis and such to work as designed. No other material changes against b.06.
10/30:
Screenshot from power menu fixed and Gingerbread default launcher restored.
10/29:
Cleanup release. 2.3.7 codebase merge with CM7 upstream completed. "99memory" file added - see the notes below for how to tune this if you want to. Significant change to power management was made in the kernel; if you have Wifi turned off the phone will enter deep sleep, but if it's loaded then the sleep state is held at one level higher to prevent Wifi lockups. Note that data, when active, is a major power pig, even if nothing appears to be using it. It looks like Sprint has some "keep alive" processing going on either at the network level or in the actual CDMA driver code (which we don't have) that plays hell with power consumption. In short, with a data connection up I can't get materially under 30ma when idle and it's either the carrier or the CDMA radio code doing it - either way, I have no way to change it as there's no source to the chipset code available. Juice Defender, assuming Wifi is off, does a amazingly excellent job in conjunction with this release in shutting down the data connection and "waking it" once every 15 minutes or so to check for new notifications. It makes a huge difference in power burn with the phone in your pocket. You decide if its worth losing "instant" data notifies. I noted the same battery behavior on stock (Froyo) when I first got this phone, so my best guess is that this is in the radio firmware itself. Last alpha release pulled.
10/26:
Wifi wakelock problem is fixed. PRL now comes out of the radio and proximity sensor has more changes made. Note that the prox sensor may "flash" if you put the phone to your head before the call connects (before the "vibrate" after you dial); it should stop as soon as the phone goes into the "active" state.
10/22:
CIFS support via kernel loadable (.ko); NOT loaded by default as its very large. You can enable this in the startup scripts if you want it. USB tethering fixed. Proximity sensor "blinking" fixed. Various other minor changes as well.
10/16:
Data drop detection/correct code added. Front camera options that were unsupported in the hardware (and which could cause lockups) removed. Memory management changes made to improve performance. Soft keypad now PWM controlled (change levels under the CM7 options if you don't like my defaults) and other cleanup. Note: This release was early as there's a problem with some of the dependencies in the GIT servers, and as such I could not do a clean "verify builds from zero" run. Note that front camera mirror mode is enabled for preview but is NOT on snapshots and taken videos; this is being investigated as the mirroring should be on but doesn't work when the actual picture is taken.
10/12:
GAPPS removed from base build, front camera fixes complete, rear camera will now video record in HD. Tunneling support now internal to the kernel (no longer requires a loadable) for VPN users. Previous versions REMOVED.
10/2:
Partial front camera support is now available. The camera functions properly in video calling software such as Skype. Note that the "hacked" Froyo-capable Skype does not work properly; the one in the market, however, does. Other video calling applications may work but have not been tested. The Camera application itself will display the preview on the front camera but it is flipped 180 degrees (top to bottom), attempting to switch to video mode force-closes and a snapshot attempt hangs. Don't do that, basically. These are on the list to be fixed but progress is slow due to the very hacksterish way I had to implement the camera (no thanks to Motorola on that with no source access.) Kernel has the smartassv2 governor available for those who wish it and the build tree was synced up from CM7 to incorporate their fixes and updates.
9/25
Bluetooth tethering and MSS clamping implemented. Bluetooth tether is native; the MSS clamping, if recognized by other tethering applications (e.g. wireless tether) will also function to get rid of the need to set the client's MTU.
9/21
GPS now functional
9/10 morning:
Compass/geomagnetic sensors now working properly
Lights code now honors CM7's customization screens
9/5 morning build:
Market problems with apps not showing up repaired.

To file a BUG report
Use the Bugtracker Git at https://github.com/ikarosdev/CM7_Triumph_bug_tracker/issues?sort=created&direction=desc&state=open
Filing a new bug will require that you set up a login ID on Github if you don't have one. Please note that bugs reported in this thread (as opposed to discussion, which is always welcome) may or may not be noticed and tracked; if you care about whatever you're reporting, please use the GITHub system. Bugs filed on Github must include steps to re-create the problem if you're able to do so and if you can obtain one, a logcat or other trace is very helpful. You can also look at the above link to see what issues are open (please do not duplicate already-reported bugs, although if you have comments on them adding them is fine) as well as what has bene closed which may be of interest if you're looking for what is likely to show up in the next code turn.
Notes
Do NOT tamper with the following lines in build.prop:
ro.telephony.ril_nid=97
ro.telephony.ril_prl=1115
ro.telephony.ril_class=Triumph
ro.ril.def.preferred.network=4
ro.telephony.default_network=4
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
If you do there is a high probability that the radio will break. In particular the ril_class is required to deal with the oddities in the Qualcomm radio code. If you are running a different PRL you can change the prl line but it should remain present.
If you are updating from previous releases and have problems format the /system partition before you load the update. You should not need to format the data partition ("factory reset") and reload your applications, but no promises can be made at this point in development.
Custom backlight options (Settings->Cyanogen Mod->Display->Automatic Backlight) are available; you can change the behavior of the LCD backlight, including thresholds and illumination settings, the number of steps, whether averaging is used, whether hysteresis is operational and whether the button backlight is on or off as desired. Please note that unlike many devices the sensor value returned to the code is not in "lux"; it is a raw value and tops out in full sunlight somewhere under 100, with "0" being a fairly dim (but not dark) room. The default table I have loaded has the button backlight OFF for very dim ambient conditions (I like to use the phone as an alarm clock and want the buttons off at night), ON for low-but-present ambient conditions, and then OFF again (power saving) for ambient light high enough that the backlight has no real purpose. You may change this to suit yourself and your desires; some people will want the buttons on for zero-ambient conditions.
Note: As of 9/24 this load is using the "ext4" filesystem. Alternative kernels must support both that filesystem and the options CONFIG_NETFILTER_XT_TARGET_TCPMSS and CONFIG_IP_NF_MANGLE. If they do not MSS clamping will not function. If ext4 is not supported the kernel will not boot.
3g/1x data lock
If you are in a place that often switches down to 1xRTT for data due to questionable signal levels it is possible to lock the RIL to 3g mode. Note that doing so means you either get 3g speed or nothing. You need to access the "Phone Info" menu to do this using either AnyCut (from the market) or from the "Battery Monitor" Widget (go to "Tests" in the selected screen from there.) Note, however, that doing so (1) will not survive a reboot and (2) disables SMS/MMS and inbound phone calls during the time it is active. SMS/MMS will come through if you make a phone call but the EVDO-only mode for data blocks something in the radio that is required to receive and send SMS messages and the notifications of an inbound call. Since this "mode change" is actually a request to the radio ROM (which we do not have source for) this probably can't be worked around. However, I am looking into what this mode select does in the hope of being able to detect the 1x switch (which I can easily do with the existing RIL support code) and temporarily force a 3g switchback - which may or may not be highly-disruptive to data transport (if it is it's not worth doing at all, but if not...)
Note: There is an apparent memory leak in the base CM7 code somewhere. This is the cause of sensor slowdown (e.g. rotation is not immediately recognized) as the system becomes memory-constrained and ultimately will fault and reboot. I do not have isolation of this problem as of yet and have no reasonable expectation on when or if I may; for the time being I recommend a reboot on a daily basis to avoid the worst of these effects. The impact becomes particularly-severe if you use things like CoPilot that require large working sets of RAM. My instrumentation leads me to believe the problem is not in the kernel nor in the user application side of the system, but rather is in the base CM7 load. Investigation continues.
A note on overclocked kernels:
I will not be supporting these in my builds. They work, and some people want them. Isaac has built one that can (theoretically) go to 1.9Ghz.
Here's the issue in a nutshell: It's pretty easy to exceed thermal limits in a CPU doing this, and if you do, the best thing that happens is that the device becomes unstable and reboots. The worst thing that can happen is that the internal junctions in the CPU can be damaged or even destroyed. This damage is not always immediately apparent and can in fact be cumulative.
I understand some people want to overclock, but nobody really knows where "the wall" in this regard, and if you find it you're going to be very unhappy. As such if you want to have fun of this sort you'll need to load your own overclocked kernel over what I build. I respect those who are willing to take the risk but I just don't see the potential reward as being worthwhile and I don't want to be the guy that hands you a build that smokes the CPU in your phone.

Sweet man, keep up the good work! CM7 is gonna be great on the triumph.

Market fix in the latest build - please update.

Just flashed the updated ROM and so far so good. As long as the calls come through then I can wait for a full port. Thanks for your hard work =)
And on a side note, it seems like I'm getting better reception after I flashed this. (-85dBm vs ~ -95dBm to -105dBm)

The two big problems are the GPS and MMS. The MMS is a matter of hacking and time (Virgin's MMS is... odd...), the GPS is pissing me off. Again a lack of documentation strikes; it appears there's a versioning problem with the RPC stuff and the chipset and driver in question do not expose the NMEA port (which sucks.)

Awesome work!

Here is a random question. Does that lock/unlock flickering issue go away with this? What about the sometimes unresponsive back capacitive key?
Sent from my MOTWX435KT using XDA App

The auto-brightness code was completely re-implemented (by me); it's DIFFERENT in its behavior, but I like how it behaves.
I haven't had a back key problem with either this rom or the original....

HDMI bug report
I'm just trying to help out. HDMI out does not seem to be working just wanted to report this minor bug. Overall I'm loving this rom. Great job.

Great work Genesis!
Sent from my NookColor using xda premium

Anyone experiencing issues with data?
Seems like my data is intermittent and goes in and out randomly. I still see the 3G icon (and the signal status) but it goes white (no Google services) and I have no data access.

Yeah I've been losing data. Easiest fix is to turn on airplane mode on the off. Should come back on.
I've also noticed that email 2.3 keeps force closing. Got around this buy restoring email 2.2 with titanium backup.

stock video player bug
When playing videos with the stock video player the video comes out slightly glitchy. The same thing happens with YouTube videos.
I have not noticed the problem when watching flash videos or using arc media video player (have not had a chance to test others)
Love the ability to use the different themes with theme Chooser.
Agai appreciate all the hard work. Can't wait for a custom kernel

my review
ok i would like to start this off by saying that i love you for all the work you have done, you and Isaac. this is not asking you to fix anything this is just my first impressions after using this rom for two days.
*market: i believe this was already addressed in the original post of this rom. i updated market to the newest version and ever sense it has been force closing at random times. it still works to download things and browse but it will randomly force close.
*battery life has greatly decreased since i flashed cm7. even with juice defender pro it was still a much shorter life span.
*screen auto brightness: this has already been addressed i know but i am trying to do a very in depth review. it takes a while after i turn the screen on for it to brighten up enough to be clearly visible. another thing i just recently noticed was that while i was in a call and holding the phone up to my ear, the screen would repeatedly turn on and off. i believe this may have been the way i was holding the phone but it happened more than once so this is why i thought to address it.
*head set volume dropping issue. i have addressed this in a previous thread as a fix. i was hoping this would be fixed in cm7 but it must be a deep hardware issue. what happens is, when you are listening to music through the headset port and a text comes in, the phone will ring and then the music will come back on but at a significantly lower volume. the only way i have found to bring the volume back up is to make a call and then play your music again.
*music and calling: i have noticed that if you answer a call and have music playing, when you hang up the music will stay paused. i dont know if this can be fixed but i thought i would just throw it out there.
*wifi will work untill the screen goes off. the phone will not rewake and you will have to do a batt pull.
*swype fails hard. with froyo swype worked just fine but now it has very bad lag and doesnt even register when im swyiping sometimes. this is not that big of an issue because i use swype as personal preference.
*wifi wireless teather for root users. this works now! only with google web pages -_-
*mms: wont work at all. just a heads up though you can go to message settings and switch it to split messages so you can send longer messages.
as of now this is all i have but i will update this if i come up with more. as i said before i am not trying to nag you at all i just want to get my views out there and hopefully help with feature development of cm7 for the triumph.
keep up the great work guys! i cant thank you enough.

1. Market - if you loaded over the first load, you need to format /system before you do that. You've got pieces of old things laying around.
2. Battery - it's wrong (charge state) until you fully cycle it. I'm getting battery life roughly equal to the stock load (and I am off-charge a LOT)
3. Auto-brightness - This will be adjustable in the next load - the issue is that the phone turns in with the screen in the "dimmed" state and there's a smoothing period before it reacts. You can set that with the next load to make it behave however you'd like (defaults are close to, but not identical to, how it behaves now.)
4. Headset. I think this is a hardware problem.
5. Music and calling: This is a common issue with Android; when the output and input sources get reassigned the current stream is interrupted. Same thing happens if you're on speakers and plug in a headset. I doubt it's fixable (I know why it happens, but preventing the switching task from throwing the exception upstream could have extremely bad results - I'll look at it at a later date, but this is common to a LOT of Android devices.)
6. Wifi is a documented issue.
7. Swype works fine. Download the CURRENT beta. If you're using a hacked version, all bets are off. I use Swype exclusively for my keyboard on this ROM. Ditto if you're trying to sideload it from somewhere (e.g. restore from Titanium) - don't do that.
8. MMS: Documented as broken.
The thread over on Androidforums is more current than the one here, but I will endeavor to at least mirror MAJOR updates here.

richiehd said:
Here is a random question. Does that lock/unlock flickering issue go away with this? What about the sometimes unresponsive back capacitive key?
Sent from my MOTWX435KT using XDA App
Click to expand...
Click to collapse
Yes, that was something I found with CM7. The screen flickering issue is not present. YMMV.

platypuss94 said:
* another thing i just recently noticed was that while i was in a call and holding the phone up to my ear, the screen would repeatedly turn on and off. i believe this may have been the way i was holding the phone but it happened more than once so this is why i thought to address it.
Click to expand...
Click to collapse
on this note i will say it is in fact how you hold the phone. it happens to me all the time on my stock triumph. no big deal and nothing to worry about. but thank you for saying something about it none the less.

Real Cyanogen 7.2 RC2

Just noticed this:
update-cm-7.2.0-RC2-smb_a1002-signed.zip
http://download.cyanogenmod.com/?device=smb_a1002&type=RC
Anybody try it yet?
I'm still on a 1.1 Recovery, but that should not be a problem for this ROM right?

Post if you install and the success you have please. Thanks - Dan

CM7
I am running CM7.1.0.1 i am afraid to change roms due to lack of success with past flashes. I am pretty much outdated on my rom but it doesn't seem like developers are producing a lot of this particular tablet....or maybe its just me. Are any of you guys rocking a must have ROM for the tablet. I am also running into issues where i'll have to reset my tablet to access wifi. It'll freeze between screens when I enter my wireless settings. If you want me to i'll back everthing up using TB and Nandroid and try this new one if no one wants to take the plunge!

OK, I've installed it. Here's my review:
Upgrade Details:
Viewsonic G-Tablet - 1.1 Bootloader
Clockwork Recovery newly from latest ROM Manager (5.0.0.6)
Previous ROM - Official CyanogenMod 7.1.0.1
Method:
Reboot into Recovery - Wiped/Deleted/Formatted/Erased/Reset to Factory Defaults - Everything I could.
Re-partitioned 2048/0, even though I think it was that way already.
Wiped/Deleted/Formatted/Erased/Reset to Factory Defaults - Everything I could - again - and then again - a few more times, and then once again.
In case you are not comprehending the subtly of the above, let me clarify: I was trying to do a clean install.
Installed 7.2.0 RC2 from link in first post of thread.
Did NOT install Gapps, Sound Fix, Camera Fix or do any Market fix.
Observations:
- The 7.1.0.1 Bug of not having WiFi turned on upon reboot is fixed.
- WiFi Seems to connect more quickly/reliably than 7.1.0.1 - Probably (should) has DHCP bug fixed.
- Seems to have it's own audio fix. Multimedia Volume appears momentarily after boot, and sound seems to work (mostly) fine.
- DPI is set low for me -- I'll have to mess with build.prop
- Camera Works - Orientation seems correct, Snapped picture was clear, and there are more camera settings.
- There is no DSP Manager.
- In CyangenMod settings -- if you enable Screen-off Animation (Twilight Zone effect), it won't wake from a manual sleep.
- Still has problem of dockbar (not notification bar) disappearing, and I do not know how to get it back. Have to place an open/close app draw Icon on the home screens.
- Web Browser stability/speed seems better than 7.1.0.1 - This may be as much because of the wipe as anything else.
- I installed the Google Apps via the run-once market fetcher. This worked well with the exception of Google Maps:
- Current Google Maps causes almost immediate *bad* crash back to the Cyanogen Spinning arrow, and it stays there. I have to force a full reboot by power cycling. Will need to downgrade to a Maps 5.x.x I have on an SD Card someplace.
- Not sure whats up with Google Talk - Camera works for an instant, but seems to freeze, no audio. Google Talk does not seem to be in the Market, This Google Talk was in the ROM.
- Market Updated to Play automatically. Works fine. Most apps seem to be there.
- Some YouTube HQ videos still only play with HQ off. While messing with this, at some point I lost audio, and had to do the headphones in-out to get speaker audio back.
- 3D Tegra optimized game worked well with good frame rates. (Ground Effect XHD)
Look:
Definitely good ole' Gingerbread - Very few cosmetic changes from 7.1.0.1 - No CM9/Honeycomb look/icons or wallpapers. A few new Cyanogen wall papers that were not in 7.1.0.1

Skype
Just curious if you have tried Skype and the results.

Just curious if you have tried Skype and the results.
Click to expand...
Click to collapse
Sorry, but I do not use Skype.
I'll try a standard SIP client, and report back.
Now, with a Little more time on it, I can report that it is a perfectly useable ROM. I have not seen anything that would be a show stopper, or prevent this from being a release.
WiFi is definitely improved, and I would recommend it as an upgrade from 7.1.0.1.
Now an official CM9 would be better, but until then, 7.2 will keep me from feeling like I need to buy a new tablet for a while.

RC 3 out
I came over from Flashlight. CM7.2 rc3 works very well. Only issue I have is some video resolutions act like there is no sync, just get wavy lines.

Looking at the changes, which can be found here:
https://github.com/CyanogenMod/android_device_malata_smb_a1002
It does not look like much has changed from RC2 to RC3. (Which is a good thing, since by RC3, we should be getting pretty close to a release). Just some build stuff which probably does not effect the packaged ROM at all.
So I have not upgraded from RC2 to RC3.
I also get the diagonal lines in Youtube videos for some settings.
Only the fairly low resolutions seem to work at all.

List of issues with AOSP rom's

There are a bunch of AOSP rom's for our phone, most of them share the same issues since it's the same code, with slight differences based on which commits they've added. I'm hoping we can list the common issues in one thread as a reference.
1. Data handoffs between 3g/4g - I believe this is now fixed in most of them after the RIL patches, right?
2. Call volume - This CM10 commit (http://review.cyanogenmod.com/#/c/24564/) should fix this. Not in most rom's yet
3. Bluetooth pairing, call connect, streaming - does this work fully in any AOSP rom?
4. Sleep of death
5. Wakelock caused after playing media (DirectTrack)
6. Camera issues, like save to sd. The JB mod camera hasn't been updated yet.
7. Misc battery life issues - are most of these due to #5?
8. Activation issues after a flash
9. Low video recording volume
10. Notification light problems
11. 160 char sms limit, MMS doesn't work
12. Problems waking up with home button
13. Screen redraw issues (these can be fixed by turning off hardware overlays, but that increases cpu consumption)
I think it would be very helpful if we could track which rom's had which fixes merged, since otherwise it's hard to tell without asking in each thread, doing a lot of searches, and trying out.

Slimbean:
-Wake lock issue still seams to be an issue, battery life is bad
-notification light not working when call/text/email etc come in. Will be patched on next release
-data seams stable enough (ril patch is active on most recent build)
-horrible battery life
-call volume will be patched on next release
-home button to wake up phone is hit or miss
-odd screen glitches every now and then (fully live withable)
-mms sending takes forever, needed several reboots to even get it to work
-if usb fast charge is available in your kernel, it has a toggle for it in the notification tray (awesome)
-did I mention the battery life is bad?
-soft key light options do not work
I'll report more as I find them. I like these threads, good call.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises

Great idea for a thread!
Add low video recording in all AOSP Roms. As far as I know this has not been fixed yet.

Sticky?
Sent from my SCH-I535 using xda app-developers app

- continuous WiFi connectivity issues (none of the AOSP roms worked reliable for me)

annoyingduck said:
Slimbean:
-Wake lock issue still seams to be an issue, battery life is bad
-notification light not working when call/text/email etc come in. Will be patched on next release
-data seams stable enough (ril patch is active on most recent build)
-horrible battery life
-call volume will be patched on next release
-home button to wake up phone is hit or miss
-odd screen glitches every now and then (fully live withable)
-mms sending takes forever, needed several reboots to even get it to work
-if usb fast charge is available in your kernel, it has a toggle for it in the notification tray (awesome)
-did I mention the battery life is bad?
-soft key light options do not work
I'll report more as I find them. I like these threads, good call.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
Click to expand...
Click to collapse
I am using slimbean 2.5 and I am getting anywhere from 16 to 24 hours of battery life on a single charge (3-4 hours of screen) which is about normal for any AOSP/AOKP based rom.

I actually made a similar list, but deals with comparing TW quirks to AOSP quirks:
Touchwiz VS. AOSP
Touchwiz:
- No Bluetooth and Aux input simultaneously
- Wallpaper Cropping forced to non-scrolling
- No way to disable auto volume reduction upon headset plug-in
- God awful front end interface design (this is more of an opinion)
- Google Music will randomly stop working, requires screen to be turned on for it to start playing the next track
AOSP:
- Volume Quirks (upon reboot, media volume will play quiet regardless of where the slider is, if maxxed you must turn it down and then up again similar to the call volume issue)
- Call Volume at Max every call (wasn't this fixed recently?)
- Wrongly uses noise reduction mic for recording (thus quieter)
- Inferior Camera (features mainly)
- Worse battery life
- Sometimes drops data
- Not as buttery as ICS for some reason (recents excluded)
- Will frequently kill background apps, making 2GB of ram somewhat pointless
- Bluetooth streaming issues (This doesn't personally affect me but I thought I'd throw it in anyway)
Basically, the one with the shorter list wins. So, I'm on TW for now but I yearn for the AOSP list of quirks to shrink.

Div033 said:
- Wrongly uses noise reduction mic for recording (thus quieter)
Click to expand...
Click to collapse
I've been told this has been fixed, but I still experience it. Is there a workaround for this currently?

I believe that there is a big tracker which is linked to on the irc chat. I would link to it but I'm not at my pc.perhaps someone could do so?
#verizons3 on freenode
Sent from my Galaxy Nexus using Tapatalk 2

bobloblaw1 said:
I believe that there is a big tracker which is linked to on the irc chat. I would link to it but I'm not at my pc.perhaps someone could do so?
#verizons3 on freenode
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
This 1? http://tinyw.in/25QW

Number 6 is not really a problem. It's all based on personal preference.
Number 1 was fixed. Sleep of death could be kernel and/or clock speed settings. Mms works fine. There is a fix somewhere for direct track. Battery issues? Umm mines been perfect. That could be contributed to people not knowing what's causing wake locks and not fixing it. Not sure how anybody is getting screen redraws I haven't disabled hardware overlay and mine is fine, using apex if that makes a difference.
Most if not all of those issues are non existent in liquid smooth.

Hope this is the right spot to post this question. I tried flashing 2 separate roms today (Slim Rom and Liquid Smooth) which I believe are both AOSP, but I could be wrong. On both occasions, it starts to boot and gets to the google account login screen and the screen on the phone just keeps flickering and goes black.
I am unlocked, obviously rooted, with CWM 6.0.1.1 and have flashed JB TW rom in the past with no problems but went back to TW ICS, which I am currently running now.
Anyone know or direct me to the right thread as to why the screen flickering happens after flashing these AOSP roms? I haven't tried CM10 yet because these other roms actually sound more stable than CM10 right now.
Any suggestions? Thanks in advance.

bales3795 said:
Hope this is the right spot to post this question. I tried flashing 2 separate roms today (Slim Rom and Liquid Smooth) which I believe are both AOSP, but I could be wrong. On both occasions, it starts to boot and gets to the google account login screen and the screen on the phone just keeps flickering and goes black.
I am unlocked, obviously rooted, with CWM 6.0.1.1 and have flashed JB TW rom in the past with no problems but went back to TW ICS, which I am currently running now.
Anyone know or direct me to the right thread as to why the screen flickering happens after flashing these AOSP roms? I haven't tried CM10 yet because these other roms actually sound more stable than CM10 right now.
Any suggestions? Thanks in advance.
Click to expand...
Click to collapse
Disable hardware overlay in developer options

Neverendingxsin said:
Disable hardware overlay in developer options
Click to expand...
Click to collapse
That might work, but I cannot even get into the OS to disable anything. It is completely unusable when I flash any of these roms.
Would there be something out there that I could flash in CWM to disable this in the rom pre-boot?

bales3795 said:
That might work, but I cannot even get into the OS to disable anything. It is completely unusable when I flash any of these roms.
Would there be something out there that I could flash in CWM to disable this in the rom pre-boot?
Click to expand...
Click to collapse
Nothing that I know of sorry.

One of the main reasons I don't use any AOSP roms is because of the bluetooth sync issue. In two of my cars, it will sync for the first time, but any other time I get in the car it won't pair up. I have to manually connect it every single time.

wifi errors, i get out of range and or wps failed on any aosp rom.

I find that signal is just not as strong as compared to Touchwiz roms.
Sent from my SCH-I535 using xda app-developers app

ROM: CM10 M2
Using Android Pro Widgets (the APW People widget in particular), it lags (the widget, not the ROM). Anyone run into this issue? Not a big problem, just curious.

Any word on when the call volume is going to be merged into the CM10 build for d2vzw

[Help Eachother] STOCK / CM11 Issues&Solutions

The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
CM11 ISSUES:
-Video recording lags in reduced luminosity.
-The phone heats too much when playing/watch videos for long time and so on.
-Volume during call is too low.
-Ocasionally freezes & crashes.
-Some graphical issues when the phone freezes.
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
STOCK ISSUES:
-Video blinks in low light(from what I've read it focuses wrong on the light source and starts blinking).
-The proximity sensor remains on after a missed call.
-Multi touch doesn't work as well as on CM11.
-Some weird freezes during call ( the screen remains off / freezes and you can't end the call / sometimes even answer )
-Camera doesn't have as much detail as in CM11 ( if you zoom in,the image doesn't clarify).
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
CM11 FIXES:
-Lag in video recording can be reduced by lowering the exposure.In medium to low light " - 1 " works pretty good and in very low to low light " - 2 " .However,when you use " - 2 " ,the recorded video will be very dark.Still haven't found a solution for this.
-About heating problem,you might want to try @Shivam Kuchhal 's kernel.He reported that his phone doesn't get heat up more than normal.
-About volume during call,it's been solved partially in newer releases by editing snd_soc_msm file.However,if the value is too high,the phne volume will also be too high and the speaker will produce distorsioned sound.However,I see they found a resonable value and both,the volume during call & speaker is about fine.
-For headset buttons not working,you must edit Generic.kl file.Here's a short tutorial to help you:
Go to: system/usr/keylayout/Generic.kl and change as below
key 226 HEADSETHOOK
key 256 BUTTON_1
change to
key 226 BUTTON_1
key 256 HEADSETHOOK
STOCK FIXES:
-For proximity sensor and weird freezes during a call use this tutorial .Haven't tested it personally,but people reported it works even on latest .17 fw.
-For Mac issue [ works for cm11 as well ]
1)Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
That's all for now,continue to post bugs&fixes and most important:
HELP EACHOTHER

Marius Cristian said:
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
Click to expand...
Click to collapse
Proximity fix not working!!!

More Kitkat Bugs List:-
1. Headset buttons
2. Camera experiencing crashes randomly, sometimes cause overexposure and being unstable at flash mode
3. Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone.
4. Call bugs(e.g. distortion etc.)
5. Lag when using the video camera
6. battery draining faster then on stock rom. (was improved on early nightly releases....now its back again)
7. GPS not working again (for some it does...others it doesnt....again...wasnt there on first nightlies)(Mostly Happens In CM11)
8. Camera quality is much,much worse then on stock rom
9 . Phone may left hanging and screen wont turn on for several seconds...
10. Some apps are unsupported on playstore...

CM11 bugs
CM11:
1. Switch to HDR mode and within 3 snaps camera app will FC.
2. Headset buttons.. I have to manually edit that Generic.kl after every nightly update.
3. As mentioned above, graphical glitch after updates.

Some of bugs that u mentioned @David pro has been fixed by users, but device maintainer didn't merged it for some reason in official builds. So, get started:
1. These buttons can be fixed, someone(I don't remember who, Sorry) has created a modified Generic.kl. You can find that file somewhere on this forum.
2. Camera quality is medium, but videos are very poor..
3. Still exist
4. @up
5. As I said, videos are bad
6. Caused by Google Play Services, 1st method is use xposed Framework and one of its add-ons, 2nd is just disable Services from Settings>Apps(i'm using second one, because I just don't like Xposed)
7.GPS is working fine, at least for me. No fix needed
8.Yep, on stock it is better.
9.It's caused by "Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone."
10.Well, some of them are only for one platform or type of devices,eg. Tegra 4 games.

No heating issues noticed so far(I use my kernel obviously) and yeah the camera and video quality isn't anything worth praising. Also the hwcomposer issue happens only one time after every boot, after that its all fine.
I normally use AOSPA.

Actually,I think the cm11 camera takes better photos than stock,but it can be buggy sometimes :silly:
About GPS,it's working fine for me too.
About video camera being laggy...I think it's because our phone lacks drivers update.It's hard to believe the video camera will ever be 100% fixed.
I'm sorry I'm kinda busy those days and I don't have time to administrate this thread.I'll edit the main post as soon as I can with solution you guys posted.But it's true,there are things which can't be fixed.Until I come back, HELP EACHOTHER

an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang

vishalaestro said:
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
Click to expand...
Click to collapse
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.

Marius Cristian said:
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Click to expand...
Click to collapse
another BUG with the stock ROM
1)walkman app flickers in the widget lockscreen
2)poor memory management need to restart the phone daily else the phone lags like a hell
3)camera app didn't respond ,it doesn't even the focus sometimes ,clearing the app data solves this problem temporarily and i think it was not present with the .12 update ,so if anybody could extract the camera app from the .12 update similar to the phone app freeze issue the problem might be solved.
3)walkman app or any other music player makes music to stutter when the same song is played more than one time provided if the songs are stored in memory card also i know that my sdcard doesn't have any problem because it worked fine with galaxy s3.my sd card is sandisk ultra class 10 32 gb
4)battery drain heavy when wifi is switched on compared to previous android 4.1.2
note:i have not rooted my phone or modded my firmware .all i run is the apps taken from the playstore.i have done a factory reset for more than 4 times.

CM11 / Stock (using custom kernel) bug:
Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
Solution:
Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone

solution for Play Services battery drain in CM11

CM11 issues
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.

chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
Nfc icon not in statusbar is on all cyanogenmod/aosp based rom

chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother

@underd0g
Nice fix for WiFi-Mac interference problem. :good:

Marius Cristian said:
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
Click to expand...
Click to collapse
guys please try to solve the issues with stock ROM because they are the stable ones and the bugs are easily repairable if the bugs are reached to right hands.so pls first concentrate on stock ROM

I've been playing around with 4.4 video recording..what i think is the lags occurs when we record in low lights related with the kernel..i'm testing with snapcam as its has auto flash when recording in low lights..First result is same as stock..but in snapcam it has touch to focus when recording..after touch,the recording will get a bit darker when it refocus and walla..no lags..
What i found is, the camera will automatically reduced the exposure to -1 for avoiding the lags even it is on default setting..
When moving the camera in low lights,the recording will lags again after few second..that is with continuous focus..set to normal or auto..no lags..so our stock cam using continuous focus for recording..
Back to the kernel thing..from what i see from the recording is same like this when i'm playing with cnt rom to to get wifi and overclock working.

Ok,so I went back to stock.I'm amazed by the battery life,it lasted 2 days and I used the phone a lot ( especially for calls ).
However,after using the fix for freezes during call and so on,I still have experienced this morning an issue.While I was talking to someone,someone else called and the phone was beeping but the screen was frozen.I had to press the power button to lock the device then unlock it to get the screen to show who's calling and to give me the possibility to answer the call.What do you think I should do?For now I'll wipe phone app data,but I'm also waiting if someone knows a good,another solution to post.

Anyone know a way to remove the automatic shutdown?
My phone shuts down if it reaches 25%

Phone performance

I disabled the "Turn over to mute" and "Turn over to activate" settings under Settings > Gestures and i would swear my phone is actually performing better than what it was. Can anyone confirm this for me?

It could be a placebo but I notice it. I had already turned off flip to snooze on mine but left flip to mute on. I had lag when changing from Chrome back to the Homescreen prior to turning off the flip to mute setting. After turning it off it did not lag. In an attempt to recreate the issue I cleared the memory and did it again with no apps running in the background as a baseline and had lag with flip to mute on vs off when going from Chrome back to the homescreen. Also tested it when opening and scrolling through the app drawer. I can't wait for 5.1 update, if it comes...

After switching to Apex launcher, and turning off the other two gestures in the Settings, I have had no instances of missed double taps. It was pretty reliable to begin with, but yes, I was noticing some drops. But those are now gone.
I know everyone is complaining of UI lag - which is indeed present. However I decided to do a more real world test. I loaded up WatchESPN, OSMonitor, Play Store,
Gmail, Firefox (with Engadget open), Two camera apps, Hangouts, Play Newsstand, HBO Go, Google Photos, ES File Explorer, N7 Music Player, YouTube and MX Player. After loading all these up one after another, I started Nokia Here Maps - and asked it to locate an address on the other side of town and compute point to point directions to it. It took what seemed like a blink of an eye, and it was back with the route. I then turned WiFi off ( so that it cannot hand over the task to a server in the cloud ) , and asked it to compute another route, and again it was back within a second, with multiple route alternatives. So - to me - this is a more real life use case - I will actually be using the device a lot in this fashion - and for that - it is performing quite well. In general I have noticed that the UI lag does not get worse with the number of apps loaded. So when it come to real heavy lifting, I think the device is doing pretty well .
There is a YouTube video out there today, which is claiming that the Alcatel did better than a Galaxy S6 in running multiple 3D games simultaneously. I will myself never play any games on this device . For my applications - I find the performance satisfactory. Of course, this clearly has all the 5.0 performance issues, which I am hoping will clear up with 5.1 / 5.2 update.

You may want to go under developer options and try things such as disabled the animation scales or lowering them from 1.0 to .5 and possibly enabling gpu decoding of 2d content.....disabling the animation will give the ui response a bit of snappiness.
If you are running nova launcher it has it's own animation settings under "look and feel" and you can choose the "faster than light" option....I disable all the animations...I'm interested in gettings things done..not gimicks and "flash". I'm sure apex has similar settings.

famewolf said:
You may want to go under developer options and try things such as disabled the animation scales or lowering them from 1.0 to .5 and possibly enabling gpu decoding of 2d content.....disabling the animation will give the ui response a bit of snappiness.
Click to expand...
Click to collapse
I already have animations down to 0.5 - I am not touching anything else there. Apex has a setting to speed up some animations as well.
What is a good way to test the browser ? I am using Firefox - with adblock plus.

stl1859 said:
I already have animations down to 0.5 - I am not touching anything else there. Apex has a setting to speed up some animations as well.
What is a good way to test the browser ? I am using Firefox - with adblock plus.
Click to expand...
Click to collapse
When the phone is rooted I'll use adaway....what exactly do you want to "test"? I use lightning+ browser(lightning browser (without the +) is free) which is always nice and snappy.

I've found, that turning of the OS "vibrate" on tap functions seems to have improved performance for me. At the very least it feels better. I feel like i was getting 2 different vibrations when using keyboard, and it would double tap things by accident as a result. You also need to independently turn off vibration on the keyboard if you want it gone completely.

Has anyone noticed that transition animation scale keeps on reverting back to 1x after it has been set to 0.5x ? Does this qualify as a bug ? Or is there something I am missing ?
BTW - even with the third party launcher, I am getting unresponsive double-tap ( wake only ) occasionally, and unset/set the option always brings it back. This is something that Alcatel should be able to fix - clearly a software issue.

stl1859 said:
Has anyone noticed that transition animation scale keeps on reverting back to 1x after it has been set to 0.5x ? Does this qualify as a bug ? Or is there something I am missing ?
BTW - even with the third party launcher, I am getting unresponsive double-tap ( wake only ) occasionally, and unset/set the option always brings it back. This is something that Alcatel should be able to fix - clearly a software issue.
Click to expand...
Click to collapse
Has anyone found a fix for this? Mine does this as well, resetting the transition scale!
Thanks

zapper_master said:
Has anyone found a fix for this? Mine does this as well, resetting the transition scale!
Thanks
Click to expand...
Click to collapse
Never had that problem, I've been using nova prime and double tap to wake works perfectly.
Sent from my 6045I using Tapatalk