Database Info

[ROM][Beta][Final] CM7 Android For Triumph [Tickerguy Edition; kernel: Mine] 11/19

PLEASE NOTE THE FOLLOWING:
This is BETA code. Some things do not work and you should assume there will be BUGS. I am not responsible if you brick your phone with this or any other firmware. You are your own warranty once you start loading firmware. Please do NOT post about anything that's in the "broken" list; I will ignore you if you do.
If it's not listed as working or broken below then that particular feature has likely not been tested at all.
Kernel: Mine, built from Motorola's released source. Includes Smartassv2 governor and ext2, ext3 and ext4 filesystems plus MSS clamping support.
Codebase and credits: Originally sync'd from Isaac's work, heavily modified at this point. Isaac deserves the credit for getting the base code to boot and getting me interested in hacking on it.
What's working
Pretty much everything, except what's listed below.
What's known BROKEN:
Hdmi non-functional
The is an interrupt storm if you enable both Wifi and Bluetooth at the same time. Don't.
Front camera does not mirror snapshots or video, but does on preview.
Occasional force-closes when switching cameras front-to-back.
What's Intermittent: Nothing.
Included Apps:
Essentially nothing. Load GAPPS for Google apps (yes, you want them) by flashing these AFTER you flash the ROM:
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip - Base Google Apps
http://goo-inside.me/gapps/gapps-gb-20110828-newtalk-signed.zip - Google Talk (if you want it)
NOTE: You cannot provision on the CM7 ROM (the "Activate" apk, if you grab it from the Triumph, will not work - it appears to run, but does not function.) You must be provisioned using the stock ROM before you load this code. I am attempting to fix that, but am not confident it can be fixed as it appears to want things in the framework that I have no way to discover or duplicate.
To install:
1. MAKE A NANDROID BACKUP! I cannot emphasize this enough - and make sure you keep that backup somewhere SAFE. Most notably there is no way to activate the phone on CM7 at this time, and there may never be. If you need to change your phone number or similar you need to swap back to stock firmware. If you lose the ability to do that you will be pissed. Consider yourself warned.
2. Place the file in the below post on your SD card in the root.
3. Boot to clockwork by turning your phone off and then hold BOTH volume buttons while pressing POWER. Release power when the phone vibrates and continue to hold both volume rockers until Clockwork comes up.
4. Important: Clear the cache and data ("factory reset") If you fail to do this CM7 will blow up on boot unless you are coming from previous RECENT build. You've been warned! If you're coming from an OLD build (or stock) format /system as well.
5. Select the ZIP file from the SD card (about halfway down on the top screen of Clockwork to get to that menu, then the first entry and point at it.)
6. Commit the update.
7. If you formatted /system (and if you're coming from STOCK) flash GAPPS (below; the first is the standard GAPPS apps, the second is Google Talk) using the same procedure in #5 and #6.
On first boot it will take about 2 minutes before it comes up; if you have lots of apps it may take longer. Provided you see the little CM7 guy with the rotating arrow, it's working - be patient.

Current code download link(s)
11/19 - vB.08 http://www.mediafire.com/?bhmitbx7weqf8g2 - Wifi Tethering / FINAL
11/06 - vB.07 http://www.mediafire.com/?eqdfo7ktmtuq281 - Haptic soft keys / light sensor
10/30 - vB.06 http://www.mediafire.com/?qj28ip6o09j1ai6 - Screenshot / restore GB Launcher
10/29 - vB.05 http://www.mediafire.com/?rjf20vb74oc0irb - Cleanup release; see below
10/26: http://www.mediafire.com/download.php?wwj1l5lzjb4glfy - Wifi/PRL/Prox Sensor
10/22: http://www.mediafire.com/download.php?nssofns6sljfj33 - CIFS/Prox Sensor/USB Tether
10/16: http://www.mediafire.com/?jg5matblx1d7bq2 - First BETA
10/12: http://www.mediafire.com/download.php?wtwvx80ccsz8vfi - Last ALPHA build
Note: Loading this version requires a Clockwork that understands ext4. The following version is recommended: http://www.mediafire.com/download.php?acpcd9xtlpzqge1

Expected to be fixed in the NEXT build -
Work continues on the list in the first post along with tracking bugs that have been posted to GitHub.
Change Log (tracking as of 9/5), reverse chronological order:
11/19:
Wifi tethering is now built into the code (from Isaac's work); untested other than the fact that it does come up and is believed working. No other changes. FINAL RELEASE.
11/06:
Haptic feedback on soft keyboard now works and is treated as any other "virtual key" off the screen. Kernel modified to multiply light sensor readings by 30; this "sorta" aligns them with actual lux values (not really, but I don't have a light box that can get me a closer integration formula) and makes possible the CM7 options for "jump" settings, hysteresis and such to work as designed. No other material changes against b.06.
10/30:
Screenshot from power menu fixed and Gingerbread default launcher restored.
10/29:
Cleanup release. 2.3.7 codebase merge with CM7 upstream completed. "99memory" file added - see the notes below for how to tune this if you want to. Significant change to power management was made in the kernel; if you have Wifi turned off the phone will enter deep sleep, but if it's loaded then the sleep state is held at one level higher to prevent Wifi lockups. Note that data, when active, is a major power pig, even if nothing appears to be using it. It looks like Sprint has some "keep alive" processing going on either at the network level or in the actual CDMA driver code (which we don't have) that plays hell with power consumption. In short, with a data connection up I can't get materially under 30ma when idle and it's either the carrier or the CDMA radio code doing it - either way, I have no way to change it as there's no source to the chipset code available. Juice Defender, assuming Wifi is off, does a amazingly excellent job in conjunction with this release in shutting down the data connection and "waking it" once every 15 minutes or so to check for new notifications. It makes a huge difference in power burn with the phone in your pocket. You decide if its worth losing "instant" data notifies. I noted the same battery behavior on stock (Froyo) when I first got this phone, so my best guess is that this is in the radio firmware itself. Last alpha release pulled.
10/26:
Wifi wakelock problem is fixed. PRL now comes out of the radio and proximity sensor has more changes made. Note that the prox sensor may "flash" if you put the phone to your head before the call connects (before the "vibrate" after you dial); it should stop as soon as the phone goes into the "active" state.
10/22:
CIFS support via kernel loadable (.ko); NOT loaded by default as its very large. You can enable this in the startup scripts if you want it. USB tethering fixed. Proximity sensor "blinking" fixed. Various other minor changes as well.
10/16:
Data drop detection/correct code added. Front camera options that were unsupported in the hardware (and which could cause lockups) removed. Memory management changes made to improve performance. Soft keypad now PWM controlled (change levels under the CM7 options if you don't like my defaults) and other cleanup. Note: This release was early as there's a problem with some of the dependencies in the GIT servers, and as such I could not do a clean "verify builds from zero" run. Note that front camera mirror mode is enabled for preview but is NOT on snapshots and taken videos; this is being investigated as the mirroring should be on but doesn't work when the actual picture is taken.
10/12:
GAPPS removed from base build, front camera fixes complete, rear camera will now video record in HD. Tunneling support now internal to the kernel (no longer requires a loadable) for VPN users. Previous versions REMOVED.
10/2:
Partial front camera support is now available. The camera functions properly in video calling software such as Skype. Note that the "hacked" Froyo-capable Skype does not work properly; the one in the market, however, does. Other video calling applications may work but have not been tested. The Camera application itself will display the preview on the front camera but it is flipped 180 degrees (top to bottom), attempting to switch to video mode force-closes and a snapshot attempt hangs. Don't do that, basically. These are on the list to be fixed but progress is slow due to the very hacksterish way I had to implement the camera (no thanks to Motorola on that with no source access.) Kernel has the smartassv2 governor available for those who wish it and the build tree was synced up from CM7 to incorporate their fixes and updates.
9/25
Bluetooth tethering and MSS clamping implemented. Bluetooth tether is native; the MSS clamping, if recognized by other tethering applications (e.g. wireless tether) will also function to get rid of the need to set the client's MTU.
9/21
GPS now functional
9/10 morning:
Compass/geomagnetic sensors now working properly
Lights code now honors CM7's customization screens
9/5 morning build:
Market problems with apps not showing up repaired.

To file a BUG report
Use the Bugtracker Git at https://github.com/ikarosdev/CM7_Triumph_bug_tracker/issues?sort=created&direction=desc&state=open
Filing a new bug will require that you set up a login ID on Github if you don't have one. Please note that bugs reported in this thread (as opposed to discussion, which is always welcome) may or may not be noticed and tracked; if you care about whatever you're reporting, please use the GITHub system. Bugs filed on Github must include steps to re-create the problem if you're able to do so and if you can obtain one, a logcat or other trace is very helpful. You can also look at the above link to see what issues are open (please do not duplicate already-reported bugs, although if you have comments on them adding them is fine) as well as what has bene closed which may be of interest if you're looking for what is likely to show up in the next code turn.
Notes
Do NOT tamper with the following lines in build.prop:
ro.telephony.ril_nid=97
ro.telephony.ril_prl=1115
ro.telephony.ril_class=Triumph
ro.ril.def.preferred.network=4
ro.telephony.default_network=4
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
If you do there is a high probability that the radio will break. In particular the ril_class is required to deal with the oddities in the Qualcomm radio code. If you are running a different PRL you can change the prl line but it should remain present.
If you are updating from previous releases and have problems format the /system partition before you load the update. You should not need to format the data partition ("factory reset") and reload your applications, but no promises can be made at this point in development.
Custom backlight options (Settings->Cyanogen Mod->Display->Automatic Backlight) are available; you can change the behavior of the LCD backlight, including thresholds and illumination settings, the number of steps, whether averaging is used, whether hysteresis is operational and whether the button backlight is on or off as desired. Please note that unlike many devices the sensor value returned to the code is not in "lux"; it is a raw value and tops out in full sunlight somewhere under 100, with "0" being a fairly dim (but not dark) room. The default table I have loaded has the button backlight OFF for very dim ambient conditions (I like to use the phone as an alarm clock and want the buttons off at night), ON for low-but-present ambient conditions, and then OFF again (power saving) for ambient light high enough that the backlight has no real purpose. You may change this to suit yourself and your desires; some people will want the buttons on for zero-ambient conditions.
Note: As of 9/24 this load is using the "ext4" filesystem. Alternative kernels must support both that filesystem and the options CONFIG_NETFILTER_XT_TARGET_TCPMSS and CONFIG_IP_NF_MANGLE. If they do not MSS clamping will not function. If ext4 is not supported the kernel will not boot.
3g/1x data lock
If you are in a place that often switches down to 1xRTT for data due to questionable signal levels it is possible to lock the RIL to 3g mode. Note that doing so means you either get 3g speed or nothing. You need to access the "Phone Info" menu to do this using either AnyCut (from the market) or from the "Battery Monitor" Widget (go to "Tests" in the selected screen from there.) Note, however, that doing so (1) will not survive a reboot and (2) disables SMS/MMS and inbound phone calls during the time it is active. SMS/MMS will come through if you make a phone call but the EVDO-only mode for data blocks something in the radio that is required to receive and send SMS messages and the notifications of an inbound call. Since this "mode change" is actually a request to the radio ROM (which we do not have source for) this probably can't be worked around. However, I am looking into what this mode select does in the hope of being able to detect the 1x switch (which I can easily do with the existing RIL support code) and temporarily force a 3g switchback - which may or may not be highly-disruptive to data transport (if it is it's not worth doing at all, but if not...)
Note: There is an apparent memory leak in the base CM7 code somewhere. This is the cause of sensor slowdown (e.g. rotation is not immediately recognized) as the system becomes memory-constrained and ultimately will fault and reboot. I do not have isolation of this problem as of yet and have no reasonable expectation on when or if I may; for the time being I recommend a reboot on a daily basis to avoid the worst of these effects. The impact becomes particularly-severe if you use things like CoPilot that require large working sets of RAM. My instrumentation leads me to believe the problem is not in the kernel nor in the user application side of the system, but rather is in the base CM7 load. Investigation continues.
A note on overclocked kernels:
I will not be supporting these in my builds. They work, and some people want them. Isaac has built one that can (theoretically) go to 1.9Ghz.
Here's the issue in a nutshell: It's pretty easy to exceed thermal limits in a CPU doing this, and if you do, the best thing that happens is that the device becomes unstable and reboots. The worst thing that can happen is that the internal junctions in the CPU can be damaged or even destroyed. This damage is not always immediately apparent and can in fact be cumulative.
I understand some people want to overclock, but nobody really knows where "the wall" in this regard, and if you find it you're going to be very unhappy. As such if you want to have fun of this sort you'll need to load your own overclocked kernel over what I build. I respect those who are willing to take the risk but I just don't see the potential reward as being worthwhile and I don't want to be the guy that hands you a build that smokes the CPU in your phone.

Sweet man, keep up the good work! CM7 is gonna be great on the triumph.

Market fix in the latest build - please update.

Just flashed the updated ROM and so far so good. As long as the calls come through then I can wait for a full port. Thanks for your hard work =)
And on a side note, it seems like I'm getting better reception after I flashed this. (-85dBm vs ~ -95dBm to -105dBm)

The two big problems are the GPS and MMS. The MMS is a matter of hacking and time (Virgin's MMS is... odd...), the GPS is pissing me off. Again a lack of documentation strikes; it appears there's a versioning problem with the RPC stuff and the chipset and driver in question do not expose the NMEA port (which sucks.)

Awesome work!

Here is a random question. Does that lock/unlock flickering issue go away with this? What about the sometimes unresponsive back capacitive key?
Sent from my MOTWX435KT using XDA App

The auto-brightness code was completely re-implemented (by me); it's DIFFERENT in its behavior, but I like how it behaves.
I haven't had a back key problem with either this rom or the original....

HDMI bug report
I'm just trying to help out. HDMI out does not seem to be working just wanted to report this minor bug. Overall I'm loving this rom. Great job.

Great work Genesis!
Sent from my NookColor using xda premium

Anyone experiencing issues with data?
Seems like my data is intermittent and goes in and out randomly. I still see the 3G icon (and the signal status) but it goes white (no Google services) and I have no data access.

Yeah I've been losing data. Easiest fix is to turn on airplane mode on the off. Should come back on.
I've also noticed that email 2.3 keeps force closing. Got around this buy restoring email 2.2 with titanium backup.

stock video player bug
When playing videos with the stock video player the video comes out slightly glitchy. The same thing happens with YouTube videos.
I have not noticed the problem when watching flash videos or using arc media video player (have not had a chance to test others)
Love the ability to use the different themes with theme Chooser.
Agai appreciate all the hard work. Can't wait for a custom kernel

my review
ok i would like to start this off by saying that i love you for all the work you have done, you and Isaac. this is not asking you to fix anything this is just my first impressions after using this rom for two days.
*market: i believe this was already addressed in the original post of this rom. i updated market to the newest version and ever sense it has been force closing at random times. it still works to download things and browse but it will randomly force close.
*battery life has greatly decreased since i flashed cm7. even with juice defender pro it was still a much shorter life span.
*screen auto brightness: this has already been addressed i know but i am trying to do a very in depth review. it takes a while after i turn the screen on for it to brighten up enough to be clearly visible. another thing i just recently noticed was that while i was in a call and holding the phone up to my ear, the screen would repeatedly turn on and off. i believe this may have been the way i was holding the phone but it happened more than once so this is why i thought to address it.
*head set volume dropping issue. i have addressed this in a previous thread as a fix. i was hoping this would be fixed in cm7 but it must be a deep hardware issue. what happens is, when you are listening to music through the headset port and a text comes in, the phone will ring and then the music will come back on but at a significantly lower volume. the only way i have found to bring the volume back up is to make a call and then play your music again.
*music and calling: i have noticed that if you answer a call and have music playing, when you hang up the music will stay paused. i dont know if this can be fixed but i thought i would just throw it out there.
*wifi will work untill the screen goes off. the phone will not rewake and you will have to do a batt pull.
*swype fails hard. with froyo swype worked just fine but now it has very bad lag and doesnt even register when im swyiping sometimes. this is not that big of an issue because i use swype as personal preference.
*wifi wireless teather for root users. this works now! only with google web pages -_-
*mms: wont work at all. just a heads up though you can go to message settings and switch it to split messages so you can send longer messages.
as of now this is all i have but i will update this if i come up with more. as i said before i am not trying to nag you at all i just want to get my views out there and hopefully help with feature development of cm7 for the triumph.
keep up the great work guys! i cant thank you enough.

1. Market - if you loaded over the first load, you need to format /system before you do that. You've got pieces of old things laying around.
2. Battery - it's wrong (charge state) until you fully cycle it. I'm getting battery life roughly equal to the stock load (and I am off-charge a LOT)
3. Auto-brightness - This will be adjustable in the next load - the issue is that the phone turns in with the screen in the "dimmed" state and there's a smoothing period before it reacts. You can set that with the next load to make it behave however you'd like (defaults are close to, but not identical to, how it behaves now.)
4. Headset. I think this is a hardware problem.
5. Music and calling: This is a common issue with Android; when the output and input sources get reassigned the current stream is interrupted. Same thing happens if you're on speakers and plug in a headset. I doubt it's fixable (I know why it happens, but preventing the switching task from throwing the exception upstream could have extremely bad results - I'll look at it at a later date, but this is common to a LOT of Android devices.)
6. Wifi is a documented issue.
7. Swype works fine. Download the CURRENT beta. If you're using a hacked version, all bets are off. I use Swype exclusively for my keyboard on this ROM. Ditto if you're trying to sideload it from somewhere (e.g. restore from Titanium) - don't do that.
8. MMS: Documented as broken.
The thread over on Androidforums is more current than the one here, but I will endeavor to at least mirror MAJOR updates here.

richiehd said:
Here is a random question. Does that lock/unlock flickering issue go away with this? What about the sometimes unresponsive back capacitive key?
Sent from my MOTWX435KT using XDA App
Click to expand...
Click to collapse
Yes, that was something I found with CM7. The screen flickering issue is not present. YMMV.

platypuss94 said:
* another thing i just recently noticed was that while i was in a call and holding the phone up to my ear, the screen would repeatedly turn on and off. i believe this may have been the way i was holding the phone but it happened more than once so this is why i thought to address it.
Click to expand...
Click to collapse
on this note i will say it is in fact how you hold the phone. it happens to me all the time on my stock triumph. no big deal and nothing to worry about. but thank you for saying something about it none the less.

Real Cyanogen 7.2 RC2

Just noticed this:
update-cm-7.2.0-RC2-smb_a1002-signed.zip
http://download.cyanogenmod.com/?device=smb_a1002&type=RC
Anybody try it yet?
I'm still on a 1.1 Recovery, but that should not be a problem for this ROM right?

Post if you install and the success you have please. Thanks - Dan

CM7
I am running CM7.1.0.1 i am afraid to change roms due to lack of success with past flashes. I am pretty much outdated on my rom but it doesn't seem like developers are producing a lot of this particular tablet....or maybe its just me. Are any of you guys rocking a must have ROM for the tablet. I am also running into issues where i'll have to reset my tablet to access wifi. It'll freeze between screens when I enter my wireless settings. If you want me to i'll back everthing up using TB and Nandroid and try this new one if no one wants to take the plunge!

OK, I've installed it. Here's my review:
Upgrade Details:
Viewsonic G-Tablet - 1.1 Bootloader
Clockwork Recovery newly from latest ROM Manager (5.0.0.6)
Previous ROM - Official CyanogenMod 7.1.0.1
Method:
Reboot into Recovery - Wiped/Deleted/Formatted/Erased/Reset to Factory Defaults - Everything I could.
Re-partitioned 2048/0, even though I think it was that way already.
Wiped/Deleted/Formatted/Erased/Reset to Factory Defaults - Everything I could - again - and then again - a few more times, and then once again.
In case you are not comprehending the subtly of the above, let me clarify: I was trying to do a clean install.
Installed 7.2.0 RC2 from link in first post of thread.
Did NOT install Gapps, Sound Fix, Camera Fix or do any Market fix.
Observations:
- The 7.1.0.1 Bug of not having WiFi turned on upon reboot is fixed.
- WiFi Seems to connect more quickly/reliably than 7.1.0.1 - Probably (should) has DHCP bug fixed.
- Seems to have it's own audio fix. Multimedia Volume appears momentarily after boot, and sound seems to work (mostly) fine.
- DPI is set low for me -- I'll have to mess with build.prop
- Camera Works - Orientation seems correct, Snapped picture was clear, and there are more camera settings.
- There is no DSP Manager.
- In CyangenMod settings -- if you enable Screen-off Animation (Twilight Zone effect), it won't wake from a manual sleep.
- Still has problem of dockbar (not notification bar) disappearing, and I do not know how to get it back. Have to place an open/close app draw Icon on the home screens.
- Web Browser stability/speed seems better than 7.1.0.1 - This may be as much because of the wipe as anything else.
- I installed the Google Apps via the run-once market fetcher. This worked well with the exception of Google Maps:
- Current Google Maps causes almost immediate *bad* crash back to the Cyanogen Spinning arrow, and it stays there. I have to force a full reboot by power cycling. Will need to downgrade to a Maps 5.x.x I have on an SD Card someplace.
- Not sure whats up with Google Talk - Camera works for an instant, but seems to freeze, no audio. Google Talk does not seem to be in the Market, This Google Talk was in the ROM.
- Market Updated to Play automatically. Works fine. Most apps seem to be there.
- Some YouTube HQ videos still only play with HQ off. While messing with this, at some point I lost audio, and had to do the headphones in-out to get speaker audio back.
- 3D Tegra optimized game worked well with good frame rates. (Ground Effect XHD)
Look:
Definitely good ole' Gingerbread - Very few cosmetic changes from 7.1.0.1 - No CM9/Honeycomb look/icons or wallpapers. A few new Cyanogen wall papers that were not in 7.1.0.1

Skype
Just curious if you have tried Skype and the results.

Just curious if you have tried Skype and the results.
Click to expand...
Click to collapse
Sorry, but I do not use Skype.
I'll try a standard SIP client, and report back.
Now, with a Little more time on it, I can report that it is a perfectly useable ROM. I have not seen anything that would be a show stopper, or prevent this from being a release.
WiFi is definitely improved, and I would recommend it as an upgrade from 7.1.0.1.
Now an official CM9 would be better, but until then, 7.2 will keep me from feeling like I need to buy a new tablet for a while.

RC 3 out
I came over from Flashlight. CM7.2 rc3 works very well. Only issue I have is some video resolutions act like there is no sync, just get wavy lines.

Looking at the changes, which can be found here:
https://github.com/CyanogenMod/android_device_malata_smb_a1002
It does not look like much has changed from RC2 to RC3. (Which is a good thing, since by RC3, we should be getting pretty close to a release). Just some build stuff which probably does not effect the packaged ROM at all.
So I have not upgraded from RC2 to RC3.
I also get the diagonal lines in Youtube videos for some settings.
Only the fairly low resolutions seem to work at all.

JellyBelly ROM (CM10) Version 3 Issues

I recently installed the JellyBelly ROM v.3 (CM10) on my EVO Shift. I really appreciate the work that the devs are doing on this ROM. I am posting some bugs I encountered after running the ROM for a day. I hope this info helps make the ROM more stable and polished for the entire community. This is my way of giving back right now. Thanks for all the hard work guys!
Green Box During Boot Screen Bug - During boot the HTC screen with white background is displayed for a few seconds, then the boot animation appears. During the transition between the HTC screen and boot animation you can see the HTC screen turns into a green box and fills the upper 30% of the display for a second or two prior to the boot animation starting. This is not a critical bug, yet it may point to a larger underlying video issue in the system. If nothing else, it could give a poor first impression about the ROM quality due to graphic glitches.
Random Screen Freeze/SOD Bug - For no apparent reason the device would lock up and refuse to respond to touch input or pressing the power button. I was forced to remove the battery several times in order to reboot the device. I was unable to establish exactly what caused the lock up, but I was curious if the CPU settings and clock settings might be to blame?
Camera Green Line Bug - After I took a couple pictures I reviewed them in the Gallery app. I immediately noticed that my pictures all had a green line down the left side. I thought that perhaps the stock Camera app was to blame so I installed CameraZoom, a third party camera app as a replacement to the stock Camera app. The result was that the entire upper half of the images taken with CameraZoom app were solid green. I'm not sure if the driver or the app is to blame for this experience.
Facebook App Crash Bug - The Facebook app refused to launch without crashing for me.
I want to run this ROM as my primary ROM, but these issues, except for the Boot Screen Bug, are show stoppers for me. Keep up the great work. I look forward to version 4!

The boot animation thing happens even when there is no boot animation... All the others I have fixed except Facebook, working on that at the moment. Once that is fixed v4 will be up... Facebook seems to be taking up way more RAM than it should The camera line is caused by the 4.2 camera, I took it out and replaced it with 4.1 camera. BTW I got your message, but was unable to respond to it.

Been running this since V2 came out and have seen your issues as well. When the screen locks up I just wait for a minute or so and the current app stops and doesn't require battery pull. Can't wait for those fixes.

bilgerryan said:
The boot animation thing happens even when there is no boot animation... All the others I have fixed except Facebook, working on that at the moment. Once that is fixed v4 will be up... Facebook seems to be taking up way more RAM than it should The camera line is caused by the 4.2 camera, I took it out and replaced it with 4.1 camera. BTW I got your message, but was unable to respond to it.
Click to expand...
Click to collapse
Thanks for the info. What was causing the phone to stop responding to input and how did you fix it? Also, do you have a complete list of outstanding bugs that have been reported so far?

adamthomas77 said:
Thanks for the info. What was causing the phone to stop responding to input and how did you fix it? Also, do you have a complete list of outstanding bugs that have been reported so far?
Click to expand...
Click to collapse
Actually you got all the bugs reported except Netflix... I got Facebook working, but now wifi won't turn on
The main issue with JB on the Shift IMO is RAM dispersion, which is mainly what I am working on.

Great info! Also meant to ask, why are there two flashlight applications installed? Why is Flipboard installed by default? Seems like Flipboard is kind of an odd default app.

Because it is a work in progress (I was testing them and forgot to remove one), and flipboard works better than Facebook

bilgerryan said:
Because it is a work in progress (I was testing them and forgot to remove one), and flipboard works better than Facebook
Click to expand...
Click to collapse
Yes, but you'll soon have those issues fixed I'm sure. Looking forward to v4.

adamthomas77 said:
Yes, but you'll soon have those issues fixed I'm sure. Looking forward to v4.
Click to expand...
Click to collapse
Got Facebook fixed, but I don't like how much performance I am having to give up to keep it from crashing... I'm hoping there is a perfect median, I just haven't found it yet. I have noticed quite a bit of difference between launchers also. This is my first dive into JB, so it's been a learning process. Got one more thing to try tonight.

I have had issues with the keyboard. on V3 Im not sure how it will work out with the V4. In most cases i would have to hold the . Shift button instead of just tapping it one to cap a letter. and then it resumes to lower case letters. ive also had to Hold FN to Create symbols instead of tapping just once. to make that symbol. over all it is a great rom i do have by far great expectations of it . i will re-flash once. some of those kinks are out such as the green line on the photos. as far as 4g goes i can careless about it considering the fact that i have no 4g in my local area .
As far as FB Goes i never use it ( Its a relationship killer ) xD
None the less keep up the great work on Deving the Rom .
I look forward to future updates. and maybe a keyboard fix. where it was like originally having it .
( Also random Closing of the browser . Ive had a few on V3 . But as i said im not sure what V4 will have in store for me. )

v4 is up and most of said bugs have been eliminated:sly:
You can post any v4 issues here if you change the title of the thread.

[Help Eachother] STOCK / CM11 Issues&Solutions

The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
CM11 ISSUES:
-Video recording lags in reduced luminosity.
-The phone heats too much when playing/watch videos for long time and so on.
-Volume during call is too low.
-Ocasionally freezes & crashes.
-Some graphical issues when the phone freezes.
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
STOCK ISSUES:
-Video blinks in low light(from what I've read it focuses wrong on the light source and starts blinking).
-The proximity sensor remains on after a missed call.
-Multi touch doesn't work as well as on CM11.
-Some weird freezes during call ( the screen remains off / freezes and you can't end the call / sometimes even answer )
-Camera doesn't have as much detail as in CM11 ( if you zoom in,the image doesn't clarify).
-Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
CM11 FIXES:
-Lag in video recording can be reduced by lowering the exposure.In medium to low light " - 1 " works pretty good and in very low to low light " - 2 " .However,when you use " - 2 " ,the recorded video will be very dark.Still haven't found a solution for this.
-About heating problem,you might want to try @Shivam Kuchhal 's kernel.He reported that his phone doesn't get heat up more than normal.
-About volume during call,it's been solved partially in newer releases by editing snd_soc_msm file.However,if the value is too high,the phne volume will also be too high and the speaker will produce distorsioned sound.However,I see they found a resonable value and both,the volume during call & speaker is about fine.
-For headset buttons not working,you must edit Generic.kl file.Here's a short tutorial to help you:
Go to: system/usr/keylayout/Generic.kl and change as below
key 226 HEADSETHOOK
key 256 BUTTON_1
change to
key 226 BUTTON_1
key 256 HEADSETHOOK
STOCK FIXES:
-For proximity sensor and weird freezes during a call use this tutorial .Haven't tested it personally,but people reported it works even on latest .17 fw.
-For Mac issue [ works for cm11 as well ]
1)Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone
That's all for now,continue to post bugs&fixes and most important:
HELP EACHOTHER

Marius Cristian said:
The point of the topic:
Post your issues found in STOCK / CM11 or post a solution.Simple as that,very productive.
I'll start with a list of bugs:
Click to expand...
Click to collapse
Proximity fix not working!!!

More Kitkat Bugs List:-
1. Headset buttons
2. Camera experiencing crashes randomly, sometimes cause overexposure and being unstable at flash mode
3. Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone.
4. Call bugs(e.g. distortion etc.)
5. Lag when using the video camera
6. battery draining faster then on stock rom. (was improved on early nightly releases....now its back again)
7. GPS not working again (for some it does...others it doesnt....again...wasnt there on first nightlies)(Mostly Happens In CM11)
8. Camera quality is much,much worse then on stock rom
9 . Phone may left hanging and screen wont turn on for several seconds...
10. Some apps are unsupported on playstore...

CM11 bugs
CM11:
1. Switch to HDR mode and within 3 snaps camera app will FC.
2. Headset buttons.. I have to manually edit that Generic.kl after every nightly update.
3. As mentioned above, graphical glitch after updates.

Some of bugs that u mentioned @David pro has been fixed by users, but device maintainer didn't merged it for some reason in official builds. So, get started:
1. These buttons can be fixed, someone(I don't remember who, Sorry) has created a modified Generic.kl. You can find that file somewhere on this forum.
2. Camera quality is medium, but videos are very poor..
3. Still exist
4. @up
5. As I said, videos are bad
6. Caused by Google Play Services, 1st method is use xposed Framework and one of its add-ons, 2nd is just disable Services from Settings>Apps(i'm using second one, because I just don't like Xposed)
7.GPS is working fine, at least for me. No fix needed
8.Yep, on stock it is better.
9.It's caused by "Black graphical glitch/scanning effect first time after you turn your screen off then on again after first restart/turning on phone."
10.Well, some of them are only for one platform or type of devices,eg. Tegra 4 games.

No heating issues noticed so far(I use my kernel obviously) and yeah the camera and video quality isn't anything worth praising. Also the hwcomposer issue happens only one time after every boot, after that its all fine.
I normally use AOSPA.

Actually,I think the cm11 camera takes better photos than stock,but it can be buggy sometimes :silly:
About GPS,it's working fine for me too.
About video camera being laggy...I think it's because our phone lacks drivers update.It's hard to believe the video camera will ever be 100% fixed.
I'm sorry I'm kinda busy those days and I don't have time to administrate this thread.I'll edit the main post as soon as I can with solution you guys posted.But it's true,there are things which can't be fixed.Until I come back, HELP EACHOTHER

an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang

vishalaestro said:
an another bug with stock rom is that "camera not available "or the camera takes a long time to recover after taking a shot
chrome browser restarts the phone or makes the phone to hang
Click to expand...
Click to collapse
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.

Marius Cristian said:
Haven't experienced those kind of issues when I used stock.Try to do a factory reset or flash the ftf again.Maybe you added some mods or apps which affected the system.
Overall,we have to admit that CM11 is blazing fast and that's why I'm still using it.I'll update the OP now with your solutions.Thanks guys and keep helping eachother.
Click to expand...
Click to collapse
another BUG with the stock ROM
1)walkman app flickers in the widget lockscreen
2)poor memory management need to restart the phone daily else the phone lags like a hell
3)camera app didn't respond ,it doesn't even the focus sometimes ,clearing the app data solves this problem temporarily and i think it was not present with the .12 update ,so if anybody could extract the camera app from the .12 update similar to the phone app freeze issue the problem might be solved.
3)walkman app or any other music player makes music to stutter when the same song is played more than one time provided if the songs are stored in memory card also i know that my sdcard doesn't have any problem because it worked fine with galaxy s3.my sd card is sandisk ultra class 10 32 gb
4)battery drain heavy when wifi is switched on compared to previous android 4.1.2
note:i have not rooted my phone or modded my firmware .all i run is the apps taken from the playstore.i have done a factory reset for more than 4 times.

CM11 / Stock (using custom kernel) bug:
Wifi MAC Address is always 00:0a:f5:89:89:ff.
If there are 2 Xperia L using CM11 / Custom Kernel connected to the same wifi, both connections will be dropped.
Solution:
Restore original MAC Address
Open /data/etc/wlan_macaddr0
Copy it's content. Ex: 01:12:13:14:15:16
Open /etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini
Find this line
Code:
Intf0MacAddress=000AF58989FF
Replace 000AF58989FF with the content of wlan_macaddr0, but write back to front. Ex: from 01:12:13:14:15:16, write to 161514131201. So it will look like this
Code:
Intf0MacAddress=161514131201
Save & Exit, Reboot the phone

solution for Play Services battery drain in CM11

CM11 issues
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.

chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
Nfc icon not in statusbar is on all cyanogenmod/aosp based rom

chinmay1234 said:
1. GPS Not Working
2. NFC not Working.
3. NFC icon not provided in Status bar when NFC is ON.
4. Frequent Crashes : Blue Screen on latest Nightlies 20140827.
5. Camera quality getting worse.
Click to expand...
Click to collapse
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother

@underd0g
Nice fix for WiFi-Mac interference problem. :good:

Marius Cristian said:
1. For many people works,for some don't.I don't understand how's possible...
2.Haven't tested it...for me it's a useless feature.
4.Well,crashes happens.However,they're not too frequent.
5.I really like the photos cm11 takes.About video...another story.Try to notice the details in the photos in comparison with stock.
I am going back to stock in order to see if I can obtain(with all the bug fixes from here) a more stable software than cm11.I'll report to you soon guys.Until then, help eachother
Click to expand...
Click to collapse
guys please try to solve the issues with stock ROM because they are the stable ones and the bugs are easily repairable if the bugs are reached to right hands.so pls first concentrate on stock ROM

I've been playing around with 4.4 video recording..what i think is the lags occurs when we record in low lights related with the kernel..i'm testing with snapcam as its has auto flash when recording in low lights..First result is same as stock..but in snapcam it has touch to focus when recording..after touch,the recording will get a bit darker when it refocus and walla..no lags..
What i found is, the camera will automatically reduced the exposure to -1 for avoiding the lags even it is on default setting..
When moving the camera in low lights,the recording will lags again after few second..that is with continuous focus..set to normal or auto..no lags..so our stock cam using continuous focus for recording..
Back to the kernel thing..from what i see from the recording is same like this when i'm playing with cnt rom to to get wifi and overclock working.

Ok,so I went back to stock.I'm amazed by the battery life,it lasted 2 days and I used the phone a lot ( especially for calls ).
However,after using the fix for freezes during call and so on,I still have experienced this morning an issue.While I was talking to someone,someone else called and the phone was beeping but the screen was frozen.I had to press the power button to lock the device then unlock it to get the screen to show who's calling and to give me the possibility to answer the call.What do you think I should do?For now I'll wipe phone app data,but I'm also waiting if someone knows a good,another solution to post.

Anyone know a way to remove the automatic shutdown?
My phone shuts down if it reaches 25%

Android 10 [Q] Features Report/Feedback

So I know there are other android 10 threads out there but I felt like y'all should get a list of whats new in front of your eyes instead of looking around:
**Improved night camera quality - Yes I have felt and improvement it is slight however, but it did get somewhat better.
**Google's new navigation gestures (I felt like I should write this because last updates, Sony phones did not get the nav gestures) however the new gestures seem just a tiny bit laggy -rarely though- and when in landscape mode, the slide down bar drops not in a symmetric way but rather drops right sided which makes things look out of place
**New CinemaPro app features - the app now has the levels of both phone microphones like on the v50 and also has aspect ratio check lines (if you want to shoot a video on cinema pro it only shoots 21/9 but you can have check lines to see whats being viewed in any other aspect ratio you choose and you also have a meter inside the camera to show you if youre in the frame or not)
**Dark mode - works on most apps, but I can't seem to activate it on my phone app, any suggestions?
**UI click sounds changed - yup! I love the new ones they sound more like Android rather than Sony and I do love Android!
**FINGERPRINT!!!! - Yes!! finally fingerprint scanner is way more responsive now!! before it was sooo strict about the cleanness and the angle, I registered 3 fingers and it only could recognize one of them because of the angle it provides, but now every finger on any angle with less cleanness is verry responsive! (could still be worked on, but im so happy with it at this moment)
**Sadly no more face unlock, even though I never used it but it worked surprisingly fast when I had the option available, but now it doesnt exist, good thing they improved the fingerprint scanner XD
**Slightly improved battery life - I only noticed it when I tested it, but if youre not a detailed tester you wont be able to recognize throughout the day, maybe if youre a slight user, yes you will notice the phone lasting 2/3 hours longer (overall usage and not screen on time) because I can tell they worked greatly on improving the idle drain.
**Speaker loudness - I think the phone got louder? I am not sure but defiantly notice something that didnt exist, not necessarily higher quality but I do notice something increasing in volume I cant tell if its volume or distortion lol but when I go to max volume there is something that makes you think, a little lower than max sounded like max on previous android but I cant tell if max here is actually louder or just more noisy especially with dolby atmos
**Some people reported signal drops? or bad signal? I havent noticed a difference here so thats good news
**Performance - the phone was fast enough to almost be the king of speed and smoothness so yah even if its better on android 10 I cant even feel the difference but it is VERY smooth even on a new android which means its pretty sick!
**Recent apps button (in old school 3 button nav bar) doesnt seem to do anything if you have custom launcher, but works on default sony launcher.
UPDATE!!
**one handed mode, which I use alot when im in bed, cant seem to be activated in the new navigation gestures, because you have to double tap home button but u dont have it in new gestures, so heres what i did:
Enabled side sense, i know it doesn't work properly, but now you have an option of controlling how to access it, You can actually enable the inside the screen tap rather than from the side (if you have a case on, this will really help you) , adjust sensitivity, position, transparency of the slide activators, and change the gestures of how it works, now i changed the double tap side sense from opening the side sense menu, to activate one handed mode, and now side sense works smoothly with gestures and i can activate one handed mode in new android nav gestures, youre welcome

Thx u for this thread

UI seems a lot smoother. I'm liking the android 10 gestures which adds to the "smoothness".
Can't really say about photo quality, haven't been using the camera much. I can definitely notice a better battery life compared to before.
Basically no issues just yet! Aside from me getting used to the new gestures (+ side sense)

Im using the google dialer app in play store. It has a way better ui, better icons and dark mode compatible. Set it as default and it's all good. I don't understand why sony have decided to use the "stock" google messenger app but not dialer... the dialer seems customized in some way idk
There is a bug that I noticed: when going back home using the gesture, if the app icon is on the dock, the icons a bit laggy and will flash for once. don't really know how to describe it

Someone can make a full review of android 10 and post it on youtube ?

Sugarcube8th said:
Im using the google dialer app in play store. It has a way better ui, better icons and dark mode compatible. Set it as default and it's all good. I don't understand why sony have decided to use the "stock" google messenger app but not dialer... the dialer seems customized in some way idk
There is a bug that I noticed: when going back home using the gesture, if the app icon is on the dock, the icons a bit laggy and will flash for once. don't really know how to describe it
Click to expand...
Click to collapse
Yah you just reminded me to add that bug, also if you on landscape mode the slide down bar is off place slides from the right rather than the middle of the screen

Pandemic said:
Someone can make a full review of android 10 and post it on youtube ?
Click to expand...
Click to collapse
I will try to do so soon, when I have free time from work

Agree with you.
- about the signal, i notice less signals bar (1-2 signal bars most of the time), but no connection drop (yet)
- wifi Mac address new option, set by default at "random Mac address"

Here's a preview of the swipe up animation bug?
https://youtu.be/ZM0Exs9F4yQ

Does anyone else have a weird audio bug where when you pause music or a video the sound spikes up for a second before it pauses. I've only tested it on the native music app and YouTube. I don't use any music streaming service such as Spotify or Pandora. I think I've concluded that this is a software bug since I when I flashed back to the previous firmware and didn't have the same problem. Maybe my device is just strange. Any opinion?

Arsyian said:
Does anyone else have a weird audio bug where when you pause music or a video the sound spikes up for a second before it pauses. I've only tested it on the native music app and YouTube. I don't use any music streaming service such as Spotify or Pandora. I think I've concluded that this is a software bug since I when I flashed back to the previous firmware and didn't have the same problem. Maybe my device is just strange. Any opinion?
Click to expand...
Click to collapse
Yes,I have the same issue, but as I remember this issue also existing on Pie.

t238z said:
Yes,I have the same issue, but as I remember this issue also existing on Pie.
Click to expand...
Click to collapse
That's strange cause I never had the problem till updating to Android 10.

I think i have a bug i have notification from album that i cant remove it. Even though i have restar my phone
It always check the update

blegs said:
I think i have a bug i have notification from album that i cant remove it. Even though i have restar my phone
It always check the update
Click to expand...
Click to collapse
this happens with me with BG player.. I simply turned off its notifications

Sugarcube8th said:
There is a bug that I noticed: when going back home using the gesture, if the app icon is on the dock, the icons a bit laggy and will flash for once. don't really know how to describe it
Click to expand...
Click to collapse
Precisely, IDK if that happens with pixel or one plus devices, but I know that it happens with Xperia 1. When you go back to the app, let's just say it's inside a folder, app shows in the dock then the folder pops back. Then if you open an app let's just say dialer then you switch to camera with recent menu and you go back to home screen it shows dialer app on where the camera icon then you get the camera icon back in the dock. Am I right?

[Bug report] Recent key not working in Android 10.
Screenshot as below: https://www.youtube.com/watch?v=hUlHZ0weCfs&feature=youtu.be
When you press Recent button, there is just nothing.

Remember people more updates will vome of android 10, this is the 1st release so except some tiny bugs. Sony/google will fix that

just added some more updates about bugs and updates in main post check it out

kevinkoo said:
[Bug report] Recent key not working in Android 10.
Screenshot as below: https://www.youtube.com/watch?v=hUlHZ0weCfs&feature=youtu.be
When you press Recent button, there is just nothing.
Click to expand...
Click to collapse
whats that launcher?

Just got mine an hour ago. Hoping that I don't experience those bugs.