Related
First let me say thanks to all of you, I purchased my wife what was out of the box a useless machine. Then before I had an sd card out of desperation I used the tnt lite and flashed off onboard storage. all went fine.
Today I see there has been a few updates so I installed a microsd (16gb ) and attempted to do it correctly using the CW mod install guide. I mounted the card and used Es FE to extract the cwmod to root /sdcard folder then I powered down and did the volume +/power. I seen the prompts it looked like it went through. then i booted back into os and used esfe to delete them out of root booted down and it shows the prompts then a yellow exclamation and just goes back into OS no matter what I have tried. I tried several times.
I dont want to mod the unit anymore without the recommended recovery methods could someone guide me a bit why I cant get cwmod to load?
thanks
bump for attention
if you are using the internal sdcard.....SDCARD:
/sdcard/update.zip
/sdcard/recovery/command
"command" must have this line in it
--update_package=SDCARD:/update.zip
OR external sdcard.......SDCARD2
/sdcard2/update.zip
/sdcard2/recovery/command
"command" must have this line in it
--update_package=SDCARD2:/update.zip
CHECK THE COMMAND FILE. If you are booting with Power/Vol+ and its not going to the clockwork menu then clockwork is not installed. Installing any Viewsonic updates will erase cwm recovery
This'll make it do the recovery
sgilbert said:
First let me say thanks to all of you, I purchased my wife what was out of the box a useless machine. Then before I had an sd card out of desperation I used the tnt lite and flashed off onboard storage. all went fine.
I powered down and did the volume +/power. I seen the prompts it looked like it went through. then i booted back into os and used esfe to delete them out of root booted down and it shows the prompts then a yellow exclamation and just goes back into OS no matter what I have tried. I tried several times.
Click to expand...
Click to collapse
I had the same scenario and it was due to the editor I was uing to make the recover/command file. Just delete what is in the recover/command folder, and unzip the file in the following link, and copy the file in the command folder to the SD. It WILL work with the next effort of install with the vol+ and power button function (sys recovery?) I got it to work, thanks to Robeet's Explanation....
The File is what I extracted from the original plain vanilla file that Robeet had referenced to on this forum. I only took the recovery/command part of the package.
Here is the link:
http://hotfile.com/dl/92124038/c519e7c/recovery_sdcard.zip.html
Good Luck!
Hey fellow G2x's. I rooted my phone today and attempted to install CM7 nightly #56. FIrst of all...
I tried just downloading the rom via rom manaer, clicked wipe data and wipe cache. When I did it tried to install and asid "Could not open cm7nightlyetc..." And then it proceeded to reboot itself as if it was a new phone.
I then tried to do it via recovery. First whenever I click install from zip card then choose zip from sdcard, the only file I can see is LOST.DIR/ even though I deliberately moved the rom into the sdcard/. I was met with the same problem.
During both the encounters. a triangle with an ! appears, with a little android dude next to it. WHat does this mean? What do I need to do to fix this?
GManLynx said:
Hey fellow G2x's. I rooted my phone today and attempted to install CM7 nightly #56. FIrst of all...
I tried just downloading the rom via rom manaer, clicked wipe data and wipe cache. When I did it tried to install and asid "Could not open cm7nightlyetc..." And then it proceeded to reboot itself as if it was a new phone.
I then tried to do it via recovery. First whenever I click install from zip card then choose zip from sdcard, the only file I can see is LOST.DIR/ even though I deliberately moved the rom into the sdcard/. I was met with the same problem.
During both the encounters. a triangle with an ! appears, with a little android dude next to it. WHat does this mean? What do I need to do to fix this?
Click to expand...
Click to collapse
First rule of G2X/Tegra2 club... don't use Rom Manager. Use CWR for all your flashing needs. *Install CWR via NVFlash only.
Alright, I'm sorry but I came the G2.... And I was wondering what NVFlash is? I'm gonna google it, but it will be nice if you answer it too.
Setting up NVFlash
Here's the guide to setting up NVFlash. It's a moderately challenging process, but it's seamless after getting it put on your G2x. This is the only way to get CWM without issues. http://forum.xda-developers.com/showthread.php?t=1054492
Oh, and remember to go into C: on your computer and make the folder "G2x". This is where you put the files from NVFlash.
darbear5610 said:
Here's the guide to setting up NVFlash. It's a moderately challenging process, but it's seamless after getting it put on your G2x. This is the only way to get CWM without issues. http://forum.xda-developers.com/showthread.php?t=1054492
Oh, and remember to go into C: on your computer and make the folder "G2x". This is where you put the files from NVFlash.
Click to expand...
Click to collapse
yup and when u get ready for commands u can copy and paste them
techboydino said:
First rule of G2X/Tegra2 club... don't use Rom Manager. Use CWR for all your flashing needs. *Install CWR via NVFlash only.
Click to expand...
Click to collapse
First - the above is the truth - learned the hard way by many.
From the "triangle" comment, I would have thought you were not able to get into recovery anymore, but you said you had tried flashing in recovery - are you still able to get into recovery? Also, when you said you moved the file to the SD - internal or external?
You could re-download the ROM on you computer and/or move the one you downloaded when in USB connect mode if you can connect through USB. and then try flashing it again.
Otherwise - did you do an nandroid back-up first (add that to the G2X Club rules). If so, and you can get into recovery, you can restore it through recovery. If not, you are truly back to square one (except for rooted).
At some point, you need to NVflash a real recovery. The one-click method in the Dev section is the easier way to go. If you can't get into recovery (you only see the triangle and it only does a factory reset), then you HAVE to start there.
Yeah I am still able to get to recovery mode. And external sdcard.
I think i'm just gonna go staright to the NVFlash way. I have a history class today so I have a hour and a half to burn.
And thanks guys for all the inputs.
I'm loving my G2x so far. So fast and sleek
All you need to do is NVFlash once, just so you can get into recovery on a bootloop (Power+VolDown)
After you install NVFlash once, you can use RomManager all you want (I do).
Rom Manager will install a temp recovery initially, but it won't affect your permanent NVFlash recovery. So just do both. Rom Manager will work perfectly fine without doing a NVFlash, but an NVFlash just enables the option to get into recovery on a cold boot.
Every day, I launch Rom Manager and it will find the latest Nightly and download it plus Google Apps, prompts for Full Wipe, Backup, or Cache options, then it will reboot, flash the items, and reboot back into Android.
So, again, NVFlash just enables Power+VolDown to get into recovery but Rom Manager works great without it. You SHOULD do BOTH initially and just get it out of the way.
Alright thanks. I just installed via NVFlash and now I will try again to install CM7
player911 said:
All you need to do is NVFlash once, just so you can get into recovery on a bootloop (Power+VolDown)
After you install NVFlash once, you can use RomManager all you want (I do).
Rom Manager will install a temp recovery initially, but it won't affect your permanent NVFlash recovery. So just do both. Rom Manager will work perfectly fine without doing a NVFlash, but an NVFlash just enables the option to get into recovery on a cold boot.
Every day, I launch Rom Manager and it will find the latest Nightly and download it plus Google Apps, prompts for Full Wipe, Backup, or Cache options, then it will reboot, flash the items, and reboot back into Android.
So, again, NVFlash just enables Power+VolDown to get into recovery but Rom Manager works great without it. You SHOULD do BOTH initially and just get it out of the way.
Click to expand...
Click to collapse
Agree with all the above (I have and use both), except for making nandroids, which was not mentioned above. The only ones where I have had a check-sum issue with trying to restore are nandroids I did with ROM Manager. I would stick with doing them straight from recovery.
Others have had issues with flashing nightlies also, but I have not noticed that as I always head straight to recovery to flash.
Question - I had flashed real recoveries with ROM manager on MT4G - why the "false" recovery issue on G2X?
So player, once I have NVFLASH and CWM, I can download ROM manager to backup/restore/flash any ROM from the list without worrying about anything?
Hey, I installed the 4.0.0.3 and I still have the same problem. I can't see any roms I put on the SD card, and when I try to install it by naming it update.zip it gives me the same error. Any ideas?
OKay so here is what happens
Installing: /sdcard/update.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directoy)
Installation aborted
THere is definately a file there. I just named it that cause it wont shop up when i choose zip from sd card.
I would redownload the zip file over the computer, happened to me before with a different rom, make sure it doesnt unzip. and then drag it to your SD card.
Okay I am perfomring that now, will edit with results.
My goodness... I think you fixed it for me. I feel like an idoit. I've been saving it to hte internal Sdcard i didn't even know that was possible.
Damnit... same problem.
Yay I got it. Thanks so much guys for all the help.
GManLynx said:
Hey, I installed the 4.0.0.3 and I still have the same problem. I can't see any roms I put on the SD card, and when I try to install it by naming it update.zip it gives me the same error. Any ideas?
OKay so here is what happens
Installing: /sdcard/update.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directoy)
Installation aborted
THere is definately a file there. I just named it that cause it wont shop up when i choose zip from sd card.
Click to expand...
Click to collapse
The ROMs were probably going to the internal SD by default. Just move them with a file manager to the external SD (unless you set up recovery to use the internal SD).
Also, do not rename them update zip - leave the names as-is so you will know what your are dealing with if you have multiple ROMs .
Then you flash it as a zip file on SD card - not as "update.zip" - that would be for the OTA update - if we ever actually see one for the G2X!
Good job Gman
Different roms put the external SD card in different places.
By default Rom Manager is set to read/write to /sdcard/... not /sdcard/external_SD that is the norm with the stock(based) roms.
Once you have CM7 on there and everything setup under standard conditions, Rom Manager will work as it should.
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
If its going to the stock recovery, its working fine! when you are on stock recovery menu, choose install packages (or whatever it is) and that will get you into clockwork recovery.
But its not loading to clockworks revovery. It just goes to standard start up when that option is selected.
correction
Sorry correction- I try that, and it says "signature verififaction failed- installation aborted." Why?
cpkfolief2 said:
im not sure what im missing- i have smooth maximus x, rom manager, and it has the recovery or whatev- but when i boot into recovery it boots the stock one- wtf! the menu for rom manager is not flashing the img. it says it is. just erased everything for nothing!problem?
Click to expand...
Click to collapse
why are you using ROM manager to flash the recovery if your on SMX ? SMX has bali 2.2 in it wich has CWM built into the kernel so your recovery should be the RED voodoo CWM recovery by default. and if stock blue recovery is coming up for some reason yu should be able to reinstall packages cause SMX has the modded stock recovery already
No no no, I'm not on smx- I'm trying to install the darn thing. I'm still on the stock rom. When I boot into recovery there are 4 options-
Reboot now
Wipe data
Wipe cache
Install packages
When selecting install packages, it fails via signature verification. There are no cwm recovery options available, either.
ooh .. your problem is you have to be rooted which im sure you already are ..
then go to the CWM thread in the DEV section and apply the modded recovery to system/bin . this will make the recovery ignore the signature check so you can flash CWM then SMX
use root explorer or adb push this file
http://dl.dropbox.com/u/2993191/recovery
to /system/bin
then put this file on the root of ur sd
http://dl.dropbox.com/u/2993191/update.zip
and put maximus x rom on ur sd
reboot recovery
reinstall packages
now ur in cwm
- Wipe Data/Factory Reset
- Wipe Cache Partition
Go to mounts and storage
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM
install zip from sd
choose zip from sd
look for maximus x rom install and u should be good
after you flash, go back to mounts and storage (before rebooting) and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
this is as easy as i can put it
Thank you very muych for your persistence to help! I am a noob and cannot find the ty button. I'm a newb, I know.HOWEVER....…I am not a newb to this in general, and I have tried that already. I read that forum . Duh!this is what happens when trying to move the file to sys.bin:
Root explorer says:
Paste operation failed-
Does not say why. I found a solution! Another forum says to downgrade to stock recovery e2, then cwm will work. But I have to get odin and crap. So if there is something I'm STILL missing, and can't move the file there for that reason, don't hesitate to enlighten me.
you need to move the modded recovery to /system/bin/recovery, anything that tells you to downgrade is not correct, as we do not have anything to 'downgrade' to. The modded recovery from Krylon does the same thing. you should be following this:
1. download the recovery.zip from krylon
2. extract the .zip and copy the recovery file to your sdcard
3. use root explorer to copy the recovery from the sdcard to /system/bin/recovery
if it fails, make sure that /system is mounted as read write, rather than read only, there should be a button in root recovery to mount read/write.
Thank you sir! I was comitting a syntax error... maybe by attempting to copy the file from the wrong directory. No, the downgrade works... I was reffering to e2 recovery for samsung rather than e3 which requires signature ver. But that takes waaaaaay longer. So thank you. I was trying to copy the whole zip, rather than the actual file because I thought I had extracted it(stupid). But yeah. Ty! Will see if cwm works now.
Glad to hear that it worked for you, let me know how cwm works out for you, as well as whatever parts come after that for you. Don't forget the Thanks button if someone helps you
The files are in their proper places, all is right.
But when I boot into recovery, I am startled with fright!
For its still normal, its still stock-
So help me ill throw this phone like a rock!
Haha. But seriously. Still same issue.
FAILS TO INSTALL ANYTHING
"Signature verification failed- installation aborted."
It seems I will have to do it the hard way by installing e2. This was this issue for the galaxy s.
Why does no one else with a sidekick have to do this!!!!? Why is it not giving y'all signature verification errors! Why is there no video yet?
Sig verification issues relate to the recovery. it should still look like stock, as the original CWM is a fake flash. Make sure you have the cwm update.zip from Krylon's thread in your sdcard.
It is!!!!!! I think I'm going to cry.
Recovery is saved (overwrite) as instructed.
Update is on sd card as instructed.
Can't be corrupted, deleted files and tried again.
Boot into recovery and stock shows (as it should.)
Re-install from package (only option other than data wipe and reboot)
Whole signature failure
Signature verification failure
Installation aborted. :'(
i'll make you a script and a zip of everything to do this for you later, but that won't be until a bit later, still have to drive my girl home. in the meantime, can you try redownloading the cwm from ayo's original post? also, have you tried the rom manager version of cwm?
Roger that.
And it would be greatly appreciated. If it is, however, just another list of the instructions as mentione previously in this thread, or in the original rom post, forget it. But if there's something new then sure. Heck, a video would be great. I'm sure I wouldn't be the only one watching it either. And I will redownload all of it again(non-existant jesus christ) and try again in the meantime. Thank you again for your effort and supporth surely it must be that I am the only on with this issue. So I am unique on xda! Silly video...
i could even go so far as to skype someone to SHOW them ive got it right or what i have done, in which case i would hope for an "ah ha!now that thurz ya problem right thur neow."
Ok, I have a script for you, it's semi-tested? I already have root in my adb, so I can't test it as well, but it should work. let me know what happens. just unzip this, and run the run.bat.
this will reboot you into recovery after it's done, so make sure you're not doing anything on your phone when you run it.
https://sites.google.com/a/stephenduvick.com/www/files/sk4gtestoneclickroot.zip?attredirects=0&d=1
Credit to Noobnl for the original script, and krylon for the fake flash.
So how exactly do I run the run.bat? Its not an exe or script file... is there a command list I need to put in? (Gawd, the last custom rom I installed(cliq xt) was so much easier, before there even was a clockwork mod. It was easier, and that was when it was the hard way!) And my phone is already rooted, sure that doesn't matter though.
Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.
baareem said:
Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.
Click to expand...
Click to collapse
what color is your cwm screen?
this may be a simpler way of gettin cwm:
http://forum.xda-developers.com/showthread.php?t=1220090
specifically, the CWM instructions set.
I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.
baareem said:
I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.
Click to expand...
Click to collapse
if you still have root, download from market
sgs kernel flasher and the flash the gingerbread kernel to give you RED recovery and flash the rom of your choice after a factory reset and usual wipes
Cool... i'm now running CM7 !
Here is what i missed for anyone who would have the same problem in the future (you can find the download links here: http://forum.xda-developers.com/showthread.php?t=1220090 ):
CWM Installation Instructions:
1) You must be rooted.
2) If you have a /Voodoo folder on your internal SD card, delete it and reboot.
3) If you're already running a custom ROM with Voodoo lagfix FULLY enabled, you can skip to step 7.
4) Download CWM-community-kernel-v8.zip if you're on Froyo or CWM-infused-v2.0.1-kernel.zip if you're on Gingerbread and place it on your internal SD card.
5) Install SGS Kernel Flasher from the Market.
6) Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
7) Download update-infused-v2.X.X-full.zip and place it on your internal SD card.
8) Power off your phone.
9) With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
10) Select "install zip from sdcard" and select update-infused-v2.X.X-full.zip.
11) Once that finishes, select "wipe data/factory reset".
12) Select "reboot system now".
13) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
Click to expand...
Click to collapse
Now just another question: i noticed different errors when running the market and other old built-in apps... I just need to reinstall gapps right?
yeah, that is why it's stickeyed.
you just had to read/search them.
market wise, there's a market fix
or you can also factory reset and wipe cache and dalvik in cwm
Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread (NOT) SOLVED.
--------
(Edited after realizing gapps still don't show up as installation didn't really worked)
baareem said:
Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread SOLVED.
Click to expand...
Click to collapse
np. take it easy, bro.
I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
E: Can't open /emmc/gapps-gb-xxxxxxx-signed.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...
baareem said:
I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...
Click to expand...
Click to collapse
what version of ROM were you running when you tried this?
Stock FRoyo?
Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.
baareem said:
Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.
Click to expand...
Click to collapse
I haven't played with CM7, it's not an infuse based rom.
I recall some installation issues with it.
I remember an unsuccess reboot intially and pull battery thing..not sure.
If you're looking to install another rom, odin back to stock and start over.
check out my sig line for some useful links
hello guys, apologies if this has been asked before, I just can't find the answer to this anywhere, not directly anyhow.
anyhow, i'm trying to install cyanogenmod 11 on my note 10.1. I have already done this on my galaxy s 3, so i am basically aware of the process. I have rooted the note,and that works fine. and had initially installed the latest version of CWM, the version recompiled for the note 10.1
i've installed the CM11 and gapps zip files to the root of my sd card (that's internal btw, I don't have a external SD) I can see the file on the device in any file manager when the device is booted up. i can move it, and root browser can see it too.
here's my problem. when i actually boot into CWM to actually install the zips, CWM can't see them. the /sdcard folder has nothing in it. this is the same even if i put the file in another location. but when i boot the device back up, there it is! it hasn't gone anywhere, it just can't be seen when the phone is in CWM mode.
thinking that it might be a issue with CWM, since the version is an unofficial recompiled version, I decided to try TWRP instead, as they have an official version for the 10.1. I installed it through odin, and it works fine, but.... IT HAS THE SAME PROBLEM! it can't actually see the files to install them.
I've even tried running a rom manager on the device. if i load up the rom manager while the device is booted up normally, it can see the files, and when i press to reboot the device into recovery mode to install the files, the device reboots, it enters TWRP, and then gives an error message that basically translates to file not found!!
I just don't understand why it can see the file in normal mode, but not when in recovery, and bear in mind this is BOTH the CM11 zip, AND the gapps zip, so really it's just ALL files it can't see!
can anyone help me with this? sorry to ask, but it's got me