Database Info

[Q] Small MMS on TMOUS issue in ICS ROMs?

Any known fix at this point for the small MMS issue on TMOUS in ICS ROMs?
I think honestly this is the only thing holding me back from running an ICS ROM full-time. I've flashed a few and found that everything else worked to a degree that I could handle - EXCEPT that!
I noticed that there wasn't the issue in the Virtuous Inquisition ROM, but I'm leaning more towards the Sense side of things.
Thanks!

Id like to know the same?

Did you try this (under the heading of "Small MMS"):
http://forum.xda-developers.com/showthread.php?t=1405457

Go to ics fixes thread and use small
Mms v1.1 fix... It solved my problem but for some reason v1 and v2 didn't work..so you might have to Try all 3 to find the one that works for you
Sent from my HTC Sensation XE with Beats Audio using XDA App

Been there done that, Maybe I will try it again but then not restore my data afterwords...

You guys might want to consider using handcent or go sms.
Sent from my HTC Sensation 4G using XDA App

MMS Fix!
ok first 2 things need to be done. open the rom zip file and go to system/customize/mns and open the default.xml file with an editing program.
in this you will find the following.
<module name="MessageConfig">
<function name="setting">
<set name="single">
<item name="SMS_Delivery_Report">false</item>
<item name="MMS_Delivery_Report">false</item>
<item name="MMS_Read_Report">false</item>
<item name="MMS_Auto_Retrieve">true</item>
<item name="MMS_Roaming_Auto_Retrieve">false</item>
<item name="MMS_Priority">Normal</item>
<item name="MMS_Msg_Size1">100K</item>
<item name="MMS_Msg_Size2">200K</item>
<item name="MMS_Msg_Size3">300K</item>
<item name="MMS_Msg_Size_Choose">300K</item>
<item name="MMS_Received_Notify">true</item>
Click to expand...
Click to collapse
Change the values in red to say 300k,600k,1000k,1000k
Then from there when you flash the rom go to your apn settings and make sure you only have one. delete the mms apn if you have it. the only one you should have is data.
edit the data apn to say the following
Name: T-Mobile Data
APN: epc.tmobile.com
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: 216.155.165.50
MMS port: 8080
MCC: 310
MNC: 260
Authentication type: Not set
APN type: default,supl,admin,dun,mms,hipri
APN protocol: IPv4
APN enable/disable: APN enabled (greyed out)
Bearer: Unspecified
Click to expand...
Click to collapse
this will work as long as your tmobile

Ok ladies and gents this mms fix that steve007 posted on does work. This is what I did to get it to work.
You will have to start fresh.... install zip and place on sd card first.
1. Data factory reset
2. Install rom, DO NOT REBOOT
3. Install mms fix
4. Reboot ROM go through setup.
5. IMPORTANT...DO NOT RESTORE ANY PREVIOUS DATA
6. You are good to go normal MMS size.
AGAIN IF YOU RESTORE DATA FROM PREVIOUS NANDROID BACKUP THE FIX WILL REVERT YOU TO SMALL MMS. I did pick and choose what I wanted to restore from Titanium with no ill effect...
__________________

akapaul26 said:
Ok ladies and gents this mms fix that steve007 posted on does work. This is what I did to get it to work.
You will have to start fresh.... install zip and place on sd card first.
1. Data factory reset
2. Install rom, DO NOT REBOOT
3. Install mms fix
4. Reboot ROM go through setup.
5. IMPORTANT...DO NOT RESTORE ANY PREVIOUS DATA
6. You are good to go normal MMS size.
AGAIN IF YOU RESTORE DATA FROM PREVIOUS NANDROID BACKUP THE FIX WILL REVERT YOU TO SMALL MMS. I did pick and choose what I wanted to restore from Titanium with no ill effect...
__________________
Click to expand...
Click to collapse
this did not work for me, this is the only issue im having with this ICS ROM everything else works great,

{rom} 6/7/12--*ucle2 4.0.4*--smooth ice R4 update

UCLE2 4.0.4 SMOOTH ICE R4​
PLEASE READ THE FULL POST BEFORE YOU FLASH !!​
BROUGHT TO YOU BY​ remf4i & raider03 & phoenix6
SMOOTH ICE R1​
fully deodexed
Removed bloat
Some theme work
SMOOTH ICE R2
Rooted (Superuser.apk + su)
Removed bloat
Insecure UCLE2 kernel (Thanks cschmitt)
init.d support
Transparent lock screen
Ics boot animation
adbd & bash
Deodexed
zipaligned
Apex launcher
Sony Bravia Engine
xLoud
3G Supercharger
Battery Saver tweaks
Touch Responsiveness
Smooth Scrolling
Extended power options
SMOOTH ICE R2.1 UPDATE
AOSP LOCK SCREEN
REMOVED AT&T LOGO FROM STATUS BAR
phoenix6 BAD ASS THEME
FEW NEW APK'S
SMOOTH ICE 2.5 UPDATE
Themed 15 toggle mod
added s-voice from gs3 (you will get a fc just keep playing with it and it will work fine)
added gtalk back in (sorry guys didnt know I took it out)
more theme
Just flash fix permissions and reboot
SMOOTH ICE R4
Fixed S Voice
Added Twizux
A little more theme and some fixes
APN'S shuold be good to go now ,if you lose them just restore it​
EXTRAS
STOCK 1% BATT MOD------- http://www.mediafire.com/?5aun8dclaeh15d1​​UCLE2 IS A FULL WIPE ROM ,INSTALL Team Wafflehouse UCLE2 Modem FIRST IF YOUR NOT ALREADY ON THE LEAK HERE IS THEIR THREAD http://d-h.st/tsS
NANDROID BACKUP !!!
Reboot to Recovery
Wipe Data/Factory Reset
Wipe cache
Under Advanced "Wipe Dalvic Cache"
Under "Mounts and Storage" Format /system
Under "Mounts and Storage" Format /data
Under "Mounts and Storage" Format /cache
If you have DARKSIDE SUPER WIPE_EXT4 flash it
Flash the ROM
Flash the icsSuperuser zip
Reboot and hit the thanks
If you dont have data after boot ,reset apn settings ,if it dont work put them in ,scroll down there on here
SMOOTH ICE R2 IS A FULL WIPE ROM ,LOOK UP ITS POSTED HOW TO FLASH ,AFTER YOU FLASH R2 AND BOOT ,THEN YOU CAN FLASH R2.1 ...YOU MUST BE ON R2 TO FLASH R2.1!!!
If you're having a reboot issues then something went wrong, after you flash the rom for any reason do not wipe anything after you boot or reboot will freeze and you have to start over, and don't be scared to wipe everything 2 or 3 times and for those who are not receiving picture messages uninstall the green aosp mms and use the blue one I have had not 1 problem with anything if you flash the aosp pack then you may have issues with the dialer I recommend for those having any issues start over wipe everything 2 or 3 times flash r2 let it boot put in apn settings and let it set for 10 to 15 minutes then flash 2.1 don't wipe anything just flash and reboot
UCLE2 SMOOTH ICE R2------- http://d-h.st/VO9
SMOOTH ICE R2.1 UPDATE------- http://d-h.st/S2j
SMOOTH ICE 2.5 UPDATE------ http://d-h.st/eJl
SMOOTH ICE R3 UPDATE------ http://d-h.st/AQd
AOSP LOCK SCREEN ------- http://d-h.st/dmD
SMOOTH ICE R4 UPDATE ------ http://d-h.st/vJO
SUPERUSER ZIP ,YOU MAY HAVE TO FLASH A FEW TIMES http://d-h.st/Mvp
AT&T APN SETTINGS
Name: ATT pta
APN: pta
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: internet + mms
APN protocol: IPv4
ROGERS APN SETTINGS
Name - Rogers LTE Internet
APN - ltemobile.apn
Proxy -
Port -
Username-
Passwors -
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - internet + mms​

First! Gonna try this out now
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks rem for your efforts!
Sent from my SAMSUNG-SGH-I727 using xda premium

R2 upload coming? Any fixes to the issues in R1 or just added the unsecured kernel?
Sent from my SAMSUNG-SGH-I727 using xda premium

edgex said:
R2 upload coming? Any fixes to the issues in R1 or just added the unsecured kernel?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
R2 changelog is posted ,other that the lockscreen wallpaper what other fixes are there ? but no its still not working yet ,Im working on transparent lockscreen

I lost root flashing this. I got into recovery. That was my bad. Any thoughts on root?
Sent from my SAMSUNG-SGH-I727 using xda premium

mrro82 said:
I lost root flashing this. I got into recovery. That was my bad. Any thoughts on root?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Flash this ,may havre to flash a few times till it says complete then you should be good

Thanks rem for your efforts. So far so good. Im not having any issues so far with this rom. Cant wait for R2 Keep ya good work.

Thanks, I'm going to try this out and see how it is. I'd rather have the 14-toggle and extended power menu so this works perfectly. Just an FYIm but the link to the Team Wafflehouse UCLE2 Modem doesn't work. It looks like the complete link wasn't posted properly.
Anyway, thanks again and I will flash this as soon as my phone is fully charged.

the change log is for the R2 and the download for the R2 are not here??? when i cant download it! im on the R1 right know and thattttt shieettt roockkkssss

artbybart said:
Thanks rem for your efforts!
Click to expand...
Click to collapse
+1
Rem will this ROM work on Rogers too?
Also, has this version gone on a diet? (Debloated)
Sent from my SAMSUNG-SGH-I727 using xda premium
Sent from my SAMSUNG-SGH-I727 using xda premium

Anyone know why this keeps coming up???
Sent from my SAMSUNG-SGH-I727

djoneal said:
the change log is for the R2 and the download for the R2 are not here??? when i cant download it! im on the R1 right know and thattttt shieettt roockkkssss
Click to expand...
Click to collapse
Its there its in the open its the only log in the op and R2 link isn't up yep, we are still working on it.
Sent from my SAMSUNG-SGH-I727 using xda premium

Hmm, I must be doing something wrong, but I'm not sure what it is. I followed what was posted in the OP, but I don't seem to have some, if not all, of the features such as the 14-toggles or the extended power menu. It seems like it's just the stock ROM, all the stock features of the UCLE2 release included. I wiped data/factory reset, cache, /system, and dalvik cache a few times like most ROMS for this phone suggest. Then I flashed the linked UCLE2 modem, as stated in the OP, and onto the ROM itself. I rebooted and let the phone sit for about 10 minutes as usual and it broke my root. I flashed the provided fix for that several times, but to no avail. And that's where I'm at now.
EDIT: I didn't notice this before, but the provided root fix gives me this error when I try to flash: E:Error in /sdcard/ROMs/Smooth Ice UCLE2/icsSuperuser-3.0.7.-efghi-signed.zip (Status 0) Installation aborted.
I thought that it might be a corrupt download, but I tried downloading a few times more and transferring to my phone, but it gives me the same error.
Any help would be greatly appreciated as I'd love to have the toggles and the extended power menu.
Thanks.
EDIT 2: I probably should have asked this before, but does the RC1 include all of these features or just the RC2 update, which I know isn't out yet?

GeNiO426 said:
Hmm, I must be doing something wrong, but I'm not sure what it is. I followed what was posted in the OP, but I don't seem to have some, if not all, of the features such as the 14-toggles or the extended power menu. It seems like it's just the stock ROM, all the stock features of the UCLE2 release included. I wiped data/factory reset, cache, /system, and dalvik cache a few times like most ROMS for this phone suggest. Then I flashed the linked UCLE2 modem, as stated in the OP, and onto the ROM itself. I rebooted and let the phone sit for about 10 minutes as usual and it broke my root. I flashed the provided fix for that several times, but to no avail. And that's where I'm at now.
EDIT: I didn't notice this before, but the provided root fix gives me this error when I try to flash: E:Error in /sdcard/ROMs/Smooth Ice UCLE2/icsSuperuser-3.0.7.-efghi-signed.zip (Status 0) Installation aborted.
I thought that it might be a corrupt download, but I tried downloading a few times more and transferring to my phone, but it gives me the same error.
Any help would be greatly appreciated as I'd love to have the toggles and the extended power menu.
Thanks.
EDIT 2: I probably should have asked this before, but does the RC1 include all of these features or just the RC2 update, which I know isn't out yet?
Click to expand...
Click to collapse
With the superuser zip you've got to keep flashing it over and over til it installs successfully and I think its only R2 that has the extended settings and the 14 toggles
Sent from my SAMSUNG-SGH-I727

jyazzie110 said:
With the superuser zip you've got to keep flashing it over and over til it installs successfully and I think its only R2 that has the extended settings and the 14 toggles
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727

R2 is not up yet guys please read the op R1 is stock debloated and partly themed that's it, R2 has all the good stuff its not ready yet we are still working on it.
Sent from my SAMSUNG-SGH-I727 using xda premium

still wating for the R2 if the R1 is smooth for me the R2 broke my head XD

Hey guys Im gonna upload a R2 test zip soon ,everything should be done but the 14 toggle mod ,raider is still working on that ,so let me know if you wanna test

love too

Can't connect to LTE

I flashed to the latest build of CM10 for the HOX... because Im a new user, I can't post to that forum yet... I'm sure I'd get my question answered there...
But I'm stuck here.
Here are my APN settings.
Name: AT&T PTA
APN: pta
Proxy:<Not set>
Port:<Not set>
Username:<Not set>
Password:<Not set>
Server:<Not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type:<Not set>
APN type: default,admin,fota,mms,supl,hipri
I'm for sure in an LTE area, my girlfriends phone.. she has a stock HOX connects to 4G LTE fine....
Is my problem the APN?
Any other HOX CM10 beta users having this issue?
FIXED!
But after flashing a Sense ROM pre 4.04 - I got LTE to work.
Yay! Looks like that's what did the trick. and I also just left the APN as it was in the newest build of CM10
1. Boot into recovery
2. Make back up of most stable ROM
3. Factory Reset
4. Wipe System
5. Flash Clean ROM 4.0
6. reboot
7. Reset back into Recovery
8. Factory Reset
9. Wipe System
10. Flash CM10/JB Google Apps
11.???
12. Profit - Get LTE

knifeparty said:
I flashed to the latest build of CM10 for the HOX... because Im a new user, I can't post to that forum yet... I'm sure I'd get my question answered there...
But I'm stuck here.
Here are my APN settings.
Name: AT&T PTA
APN: pta
Proxy:<Not set>
Port:<Not set>
Username:<Not set>
Password:<Not set>
Server:<Not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type:<Not set>
APN type: default,admin,fota,mms,supl,hipri
I'm for sure in an LTE area, my girlfriends phone.. she has a stock HOX connects to 4G LTE fine....
Is my problem the APN?
Any other HOX CM10 beta users having this issue?
Click to expand...
Click to collapse
Give this a shot (this fix is also posted several places in the cm10 thread)
http://forum.xda-developers.com/showthread.php?t=1829408
Worked for me...your results may vary

Thanks
jess.hickey said:
Give this a shot (this fix is also posted several places in the cm10 thread)
http://forum.xda-developers.com/showthread.php?t=1829408
Worked for me...your results may vary
Click to expand...
Click to collapse
I will try it out. Thanks a lot!

knifeparty said:
I will try it out. Thanks a lot!
Click to expand...
Click to collapse
Please tell us how it goes. Want to know if it fixes it before i flash CM10

s1l3nt said:
Please tell us how it goes. Want to know if it fixes it before i flash CM10
Click to expand...
Click to collapse
Haven't tried it out... looking for an older rom... can anyone link CleanROM 4.0? Not sure where to get older vesions. Someone suggested that in another thread.
Nevermind. I found it. Simple google search

knifeparty said:
I flashed to the latest build of CM10 for the HOX... because Im a new user, I can't post to that forum yet... I'm sure I'd get my question answered there...
But I'm stuck here.
Here are my APN settings.
Name: AT&T PTA
APN: pta
Proxy:<Not set>
Port:<Not set>
Username:<Not set>
Password:<Not set>
Server:<Not set>
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MMS protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication type:<Not set>
APN type: default,admin,fota,mms,supl,hipri
I'm for sure in an LTE area, my girlfriends phone.. she has a stock HOX connects to 4G LTE fine....
Is my problem the APN?
Any other HOX CM10 beta users having this issue?
Click to expand...
Click to collapse
If you flashed CM10 you shouldn't be seeing "MMS protocol" setting when adding the APN. One question did you dial *#*#4636#*#* and selected LTE,GSM,CDMA only option after you added the APN?
Sent from my One X using xda premium

rickmarz said:
If you flashed CM10 you shouldn't be seeing "MMS protocol" setting when adding the APN. One question did you dial *#*#4636#*#* and selected LTE,GSM,CDMA only option after you added the APN?
Sent from my One X using xda premium
Click to expand...
Click to collapse
I just used the APN that was set in CM10 as default after many tries... I didn't try the above method. Yeah, that was the APN I got from another thread.
But after flashing a Sense ROM pre 4.04 - I got LTE to work.
Yay! Looks like that's what did the trick.
1. Boot into recovery
2. Make back up of most stable ROM
3. Factory Reset
4. Wipe System
5. Flash Clean ROM 4.0
6. reboot
7. Reset back into Recovery
8. Factory Reset
9. Wipe System
10. Flash CM10/JB Google Apps
11.???
12. Profit - Get LTE

knifeparty said:
I just used the APN that was set in CM10 as default after many tries... I didn't try the above method. Yeah, that was the APN I got from another thread.
But after flashing a Sense ROM pre 4.04 - I got LTE to work.
Yay! Looks like that's what did the trick.
1. Boot into recovery
2. Make back up of most stable ROM
3. Factory Reset
4. Wipe System
5. Flash Clean ROM 4.0
6. reboot
7. Reset back into Recovery
8. Factory Reset
9. Wipe System
10. Flash CM10/JB Google Apps
11.???
12. Profit - Get LTE
Click to expand...
Click to collapse
Great! And if you want to make it permanent reboot into recovery and make a backup of your setup. Wipe everything minus system. Then flash a sense ROM wait for it to acquire lte and reboot to recovery again do a factory reset only and restore the backup of cm10 and you should have lte even after you reboot.
Sent from my One X using xda premium

Boost Mobile APN fix for any ROM

Okay so first thing is first let this be known that this was not created by me. I'm just sharing along since I found a fix. All you have to do is Google up "universal boost mobile APN fix for d2lte" its a mod created by mopedryder. All credit goes to him. I haven't thanked cause I'm not on the thread. But here you go. This will fix the APN. Receive and send MMS and also fix "roaming indicator" to "Boost Mobile". Hope this works for everyone else like me.
Currently tried with C-Rom. Try it out and share your findings
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE! FLASH AT YOUR OWN RISK
All Thanks go to MOPEDRYDER
How to:
1) Flash rom of choice
2) Let Rom update and finish.
3) Reboot to recovery, MAKE BACKUP, Flash fix
(wipe dalvik/cache if you want)
4) Reboot and change settings in Hangouts.
5) Test it
Since the fix is meant for the LTE network from Hangouts APN's select "Sprint CdmaNai" There are two of them so select the one that works best. I usually use the first one.
So far what i have tried it on.
*CM11 - Working with fix and using hangouts.
*Paranoid Android - Working with fix and using Hangouts
*C-Rom - Working with fix and using Hangouts As of C-Rom v7 data won't work on xt1031 so MMS will not send. And no you can't do it over WiFi might as well send it through regular Hangouts.
*Slim Rom - Not working. Just hangs at (Sending)
*Lego Rom - Not working. Hangs at (sending)
*Gummy Rom - Working with fix. Using hangouts.
*AOSB (ProBAM) - Not working. Hangs at (sending)
*Omni Rom - Working with fix. Using hangouts.
ALTERNATE FIX
After flashing APN fix and that didn't work try this:
1) Download 8sms from the playstore: https://play.google.com/store/apps/details?id=com.thinkleft.eightyeightsms.mms
2) Go to settings in 8sms-> MMS settings-> add the following
MMSC: http://mm.myboostmobile.com
MMS Proxy: 68.28.31.7
MMS Port: 80
3) Test it. Should work just fine.
Try this fix before and after flashing the APN fix with ROM. This won't work on ProBAM ROM for some reason but feel free to prove me wrong.
Mopedryder actually replied and gave his own input and this is what he had to follow with that ks go to him one more time and also junkie2100
Haha! The things you find when one googles your profile. Small world indeed.
If you want a link to the folder I keep the fixes in use this: (copy to OP if wanted)
Boost LTE fix
R2 is basically a install binary update.
Here is some backstory / info on the 'fix':
The primary goal I set out to do was to get lte working on our phones with CM / AOSP ROMs(I have a G3 Virgin Mobile phone). Secondary, if able was to get MMS to work. MMS is still a challenge to say the least. In order to get LTE / MMS to work on Sprints network you need to identify yourself as Boost / Virgin on the Sprint network...with correct settings and at times credentials. The APN settings I made actually is a combo of both Sprint and Virgin/Boost settings.
Beyond the APN settings I made a simple bash script to 'find and replace', or if not found input the settings required. It also adds a eri.xml for the phone to identify itself as Boost / Virgin.
Getting MMS to work on LTE made me pull my hair out. Virgin mobile(Boost) working on Sprint networks when it comes to MMS messages is an over complicated issue caused the providers. When attempting to receive MMS on LTE networks with stock MMS or some 3rd party MMS apps it returns with a "HTTP error: Authorization Required". When trying it on 3G its no problem. Seems they required "Authorization" for MMS on LTE but not 3G - go figure. Hangouts basically works for all because the app itself doesn't use the phones APN settings. It tries (and does) to attain what carrier you are on and use its settings. In our case it will identify you are on the Sprint network and use those APN settings. Why don't we set our phones to the Sprint settings?...no LTE then.
For Samsung phones (My S3) TW ROMs use a system called chameleon to attain both LTE and SMS/MMS ability. The chameleon system will not work in AOSP / CM ROMs. The system "shows" itself as Virgin Mobile for phone/network but Sprint for MMS.
I have also found this fix doesn't seem to work on MIUI ROMs either. Haven't figured out why. For some reason every S3 sprint MIUI ROM wont even boot on my phone.
For my fix - if anyone wants to use / edit / repost it I say go for it. Open source at its finest. Best way to learn IMO is to reverse engineer something....just be careful :fingers-crossed:
As for the code if anyone wants to see it without unzipping:
The reason this is capable of flashing on multiple phones is partition specific blocks are not used.
mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");
Click to expand...
Click to collapse
Is used and not something like:
mount("ext4", "EMMC", "/dev/block/mmcblk0p14", "/system");
Click to expand...
Click to collapse
Script I made for the build.prop edits:
#!/sbin/sh
#For APNs fix D2LTE Build ROMs
#Written by Moped_Ryder
#Update to handle universal lte builds
busybox mount -o remount,rw /system
cp /system/build.prop /system/build.prop-bak
if grep -q "ro.cdma.home.operator" "/system/build.prop"; then
sed -i 's/ro.cdma.home.operator.numeric.*$/ro.cdma.home.operator.numeric=311870/' /system/build.prop
sed -i 's/ro.cdma.home.operator.alpha.*$/ro.cdma.home.operator.alpha=Boost Mobile/' /system/build.prop
sed -i 's/ro.product.locale.region=.*$/ro.product.locale.region=US/' /system/build.prop
sed -i 's/gsm.sim.operator.alpha.*$/gsm.sim.operator.alpha=Boost Mobile/' /system/build.prop
sed -i 's/gsm.sim.operator.numeric.*$/gsm.sim.operator.numeric=311870/' /system/build.prop
sed -i 's/gsm.operator.alpha.*$/gsm.operator.alpha=Boost Mobile/' /system/build.prop
sed -i 's/gsm.operator.numeric.*$/gsm.operator.numeric=311870/' /system/build.prop
sed -i 's/gsm.sim.operator.iso-country=.*$/gsm.sim.operator.iso-country =US/' /system/build.prop
sed -i 's/gsm.operator.iso-country=.*$/gsm.operator.iso-country=US/' /system/build.prop
sed -i 's/ro.telephony.default_network=.*$/ro.telephony.default_network=8/' /system/build.prop
else
echo "####Adding the Boost Mobile APN fixes####" >> /system/build.prop
echo "ro.cdma.home.operator.numeric=311870" >> /system/build.prop
echo "ro.cdma.home.operator.alpha=Boost Mobile" >> /system/build.prop
echo "ro.telephony.default_network=8" >> /system/build.prop
echo "telephony.slteOnCdmaDevice=1" >> /system/build.prop
sed -i 's/ro.product.locale.region=.*$/ro.product.locale.region=US/' /system/build.prop
sed -i 's/gsm.sim.operator.iso-country=.*$/gsm.sim.operator.iso-country =US/' /system/build.prop
sed -i 's/gsm.operator.iso-country=.*$/gsm.operator.iso-country=US/' /system/build.prop
fi
if grep -q "moped_ryder" "/system/build.prop"; then
echo "its there"
else
echo "#moped_ryder carrier edit completed" >> /system/build.prop
fi
Click to expand...
Click to collapse
Like I said nothing too complicated
The APN Settings used are:
Credit where due > My work may not have been possible without junkie2100 from android forums. You ever see him - give him a like / thanks please :good:
...as said in the OP flash at won risk. Sorry so long

Thanks for sharing. I'm gonna give it a shot tonight after backing everything up.
Sent from my XT1031 using Tapatalk

So I did flash the fix and my phone shows up as Boost Mobile for my network, but it still won't send MMS. Which APN did you select since there's like 10 of em?
Sent from my Moto G using Tapatalk

vitokes said:
Okay so first thing is first let this be known that this was not created by me. I'm just sharing along since I found a fix. All you have to do is Google up "universal boost mobile APN fix for d2lte" its a mod created by mopedryder. All credit goes to him. I haven't thanked cause I'm not on the thread. But here you go. This will fix the APN. Receive and send MMS and also fix "roaming indicator" to "Boost Mobile". Hour this works for everyone else like me.
Currently tried with C-Rom. Try it out and share your findings.
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Just tried this with Lego ROM...did you have to clean install for it to work? I still can't access my APN settings. It says Boost for the service now instead of the Roaming Indicator message but still no MMS support. I know you gave the link for a different thread with the methods for the fix but can you give detail on the exact steps that you did for it to work on the Moto G please? It would be greatly appreciated, MMS is the last thing I'm missing, I'm loving everything else about my current ROM and really don't wanna go back to stock.

ricola1989 said:
So I did flash the fix and my phone shows up as Boost Mobile for my network, but it still won't send MMS. Which APN did you select since there's like 10 of em?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Alright so I've been going from ROM to ROM to see which one plays nice. My first was c-rom and that worked. Then I tried pa and that also worked. Anyways the apn's only go to hangouts since that's what it's meant for. Now I'm using Lego ROM and got some reason it won't send the pictures through it. The APN I pick from hangouts is SprintCdmanai.
Sent from my Moto G using Tapatalk

hhill13 said:
Just tried this with Lego ROM...did you have to clean install for it to work? I still can't access my APN settings. It says Boost for the service now instead of the Roaming Indicator message but still no MMS support. I know you gave the link for a different thread with the methods for the fix but can you give detail on the exact steps that you did for it to work on the Moto G please? It would be greatly appreciated, MMS is the last thing I'm missing, I'm loving everything else about my current ROM and really don't wanna go back to stock.
Click to expand...
Click to collapse
I was currently testing this with Lego ROM. And I can't seam to get it to send MMS either. It works with the previous ROMs I've tried.
1. Flash whatever ROM you are going to use.
2. Complete your setup. Let everything update.
3. Flash APN fix, boot when done.
The APN settings only show up in hangouts.
Sent from my Moto G using Tapatalk

So I was on Lego ROM and it wouldn't work. I don't know why. I did notice on Lego ROM you can't access the APN settings in settings>mobile network>APN settings. It's just greyed out. So I switched back to latest pa and you can access APN settings through mobile network. And I'm now sending and receiving
Sent from my Moto G using Tapatalk

vitokes said:
So I was on Lego ROM and it wouldn't work. I don't know why. I did notice on Lego ROM you can't access the APN settings in settings>mobile network>APN settings. It's just greyed out. So I switched back to latest pa and you can access APN settings through mobile network. And I'm now sending and receiving
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Good to know, I will jump back over to the Lego thread and see if the OP has any input on the issue.
Sent from my Moto G using XDA Free mobile app

I started out with a clean install of Lego ROM when I flashed this fix. I, too, an not able to send/receive MMS or pictures. I'm going to check the Lego thread and see what the OP SARS @vitokes- have you tried this fix on Slim, that's what Lego is mainly based on....
I do think that access to the APN settings in the actual Settings menu has something to do with it. Also, it took me a bit to get the ROM to give 3g since it won't stick if you select Preferred Network in the menu. You actually have to go into the Phone hidden menu info from the dialer (*#*#4636#*#*).

@ricola1989 I haven't had a chance to test on slim. I will after work though.
Sent from my Moto G using Tapatalk

trying on slim now, give me a few....

Andromendous said:
trying on slim now, give me a few....
Click to expand...
Click to collapse
Just tried on slim and it only hangs. It must be something to do with the ROM. Anyways I updated the thread wit how to's and also what ROM works and doesn't.
IF you want me to test more just let me know and I'll check them out if you would like.

vitokes said:
Just tried on slim and it only hangs. It must be something to do with the ROM. Anyways I updated the thread wit how to's and also what ROM works and doesn't.
IF you want me to test more just let me know and I'll check them out if you would like.
Click to expand...
Click to collapse
what do you mean it "hangs", it says boost mobile now. but when i tryed an mms it said "insert sim to send mms". i tryed a couple different apns, but just the default and the one mentioned a few posts back

Andromendous said:
what do you mean it "hangs", it says boost mobile now. but when i tryed an mms it said "insert sim to send mms". i tryed a couple different apns, but just the default and the one mentioned a few posts back
Click to expand...
Click to collapse
By "hangs"
I mean it hangs at just sending. Doesn't send an MMS. Or receive. And then once left for a minute or 2 it says it can't be sent. Touch to retry. I think the problem is slim ROM in general..
Edit: also the only APN's you can use from the list are the bottom 2. They are meant for CDMA network.
Sent from my Moto G using Tapatalk

Having the hanging problem I'm c-rom tried both cdma
Sent from my Moto G using Tapatalk

You are using hangouts I assume? Try "reset to default" and then change to the other apns.
Sent from my Moto G using Tapatalk

Bstrong9211 said:
Having the hanging problem I'm c-rom tried both cdma
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Also try to add your own APN settings just like the picture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Moto G using Tapatalk

That seems to have done the trick. Thanks a lot!
Sent from my Moto G using Tapatalk

Bstrong9211 said:
That seems to have done the trick. Thanks a lot!
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Glad I could help! Just give me a simple thanks and all credit goes to mopedryder.
Sent from my Moto G using Tapatalk

I'm surprised this isn't more popular. It should be added to the roll up thread.
Sent from my Moto G using Tapatalk

RingPlus provisioning on Cyanogenmod

hey guys,
I'm currently running CM13 nightlies and want to do a clean install without flashing over my current setup. is there any way i can retain my provisioning while flashing a new cm build? i tried wiping and installing a new nightly build. everything booted fine, but the phone was not provisioned. even after flashing mvno slayer, the phone wouldn't register to the network.
I have to flash back to stock and then flash cm if I want a fresh install?

Provisioning *should* persist through flashes... unless you're changing providers.
I was able to get my device provisioned for Sprint on stock when I used it, and then was able to flash any ROM I wanted. Never needed to go back to stock, but I always stayed on Sprint.

arrrghhh said:
Provisioning *should* persist through flashes... unless you're changing providers.
I was able to get my device provisioned for Sprint on stock when I used it, and then was able to flash any ROM I wanted. Never needed to go back to stock, but I always stayed on Sprint.
Click to expand...
Click to collapse
technically it's ringplus (updated title), but I don't think being an MVNO makes the process any different. So if I wiped and flashed a new CM build but couldn't get the phone to register, what can I do? Trying to avoid going through the whole process of RSDlite back to stock and starting from complete scratch...

gtmaster303 said:
technically it's ringplus (updated title), but I don't think being an MVNO makes the process any different. So if I wiped and flashed a new CM build but couldn't get the phone to register, what can I do? Trying to avoid going through the whole process of RSDlite back to stock and starting from complete scratch...
Click to expand...
Click to collapse
I'm not following - was it working before, and the act of updating the ROM to a newer build of CM broke the provisioning?
Never heard of that before, but have you considered it's the update? Have you tried restoring a backup? You do have a backup...?

arrrghhh said:
I'm not following - was it working before, and the act of updating the ROM to a newer build of CM broke the provisioning?
Never heard of that before, but have you considered it's the update? Have you tried restoring a backup? You do have a backup...?
Click to expand...
Click to collapse
Yes, everything was working fine. I wipe, then flash a new build of CM, but it doesn't register with the network. Restoring my backup has everything working again. It's just that the rom has been quite sluggish and I wanted a fresh start. I don't know if it was always like this or because of an app. That's why I'm starting over

gtmaster303 said:
Yes, everything was working fine. I wipe, then flash a new build of CM, but it doesn't register with the network. Restoring my backup has everything working again. It's just that the rom has been quite sluggish and I wanted a fresh start. I don't know if it was always like this or because of an app. That's why I'm starting over
Click to expand...
Click to collapse
Just try to clean wipe the working ROM, see if that works.
If it does, I'd say that update of CM is the issue.

Did you ever find a solution? I am having the same problem. If I install the latest CM 13 the phone no longer connects to the cell network. Stupidly, I did not do any backup, so the only option I have to go back to the stock ROM. With the stock ROM the phone connects to to the network with no problem.

nemo3 said:
Did you ever find a solution? I am having the same problem. If I install the latest CM 13 the phone no longer connects to the cell network. Stupidly, I did not do any backup, so the only option I have to go back to the stock ROM. With the stock ROM the phone connects to to the network with no problem.
Click to expand...
Click to collapse
What about flashing an older build of CM13?
What were you running before you flashed the latest CM13?

arrrghhh said:
What about flashing an older build of CM13?
What were you running before you flashed the latest CM13?
Click to expand...
Click to collapse
To answer your questions, I was running CM13 I can't find older builds of CM13 that work. The only ones I find are relatively new.
I managed to get voice to work. I still don't have data. These are the steps I took. I am not sure all of them are necessary. But at least now voice is working.
Dial *#*#4636#*#*
Click on the 3 vertical dot menu on top right
Select Radio Band -> PCS (1900 MHZ)
Back button <|
Set Preferred Network Type to LTE/CDMA (auto PRL)
Back button <|
Back Button <|
Settings -> Cellular Network Settings ->Preferred Network Type -> CDMA+LTE/EVDO
Settings -> Cellular Network Settings->CDMA subscription -> NV
Reboot
---------- Post added at 05:23 AM ---------- Previous post was at 04:44 AM ----------
OK, now I got 3G data.
I changed
Settings -> Cellular Network Settings ->Preferred Network Type -> CDMA/EVDO/GSM/WCDMA
Reboot
Now if I could only get 4G without losing voice I'd be all set. Little by little...
---------- Post added at 05:25 AM ---------- Previous post was at 05:23 AM ----------
If I go to Settings -> Cellular Network Settings ->Access Point Names, I get a message that says "APN settings are not available for this user". Is that normal? I seem to remember I had a list of APNs.

I've got the exact same problem with the CM13 nightlies on Ting. I've tried a bunch of them all the way back to April and can't get LTE to work on any of them.
If I go back to the stock ROM, it works fine. If I go back to CM11, it works fine.
I don't know if its related or not, but in the SatStat app, it shows a bunch of dashes under LTE and some long numbers like 21474 83647. This line disappears and reappears every few seconds while the app is open.

abortretryfail said:
I've got the exact same problem with the CM13 nightlies on Ting. I've tried a bunch of them all the way back to April and can't get LTE to work on any of them.
If I go back to the stock ROM, it works fine. If I go back to CM11, it works fine.
I don't know if its related or not, but in the SatStat app, it shows a bunch of dashes under LTE and some long numbers like 21474 83647. This line disappears and reappears every few seconds while the app is open.
Click to expand...
Click to collapse
If it works in CM11 but not CM13, then something changed... Please submit logs to the CM maintainer (radio logs will probably be necessary). Of course make sure the correct settings have been applied.

Red Pocket Mobile APN Settings
arrrghhh said:
If it works in CM11 but not CM13, then something changed...
Click to expand...
Click to collapse
Following this procedure allowed me to use Voice, SMS MMS and internet (both 3G and 4G) on PAC-ROM and builds of Cyanogen Mod up to and including 12.1. I have not tried 13.
Code:
1. click "Mobile networks" to access the settings
2. Data enabled checked
3. Data Roaming unchecked
4. Battery Saving Mode unchecked
5. Set preferred network type to: CDMA+LTE/EvDo
6. System select - set roaming mode to Home Only
7. Set CDMA subscription to NV
8. Create a New APN with these values:
a. Name: Red Pocket
b. APN: n.r6.ispsn
c. Proxy: Not set
d. Port: Not set
e. Username: ##########@redpocket.sprintpcs.com
replace ########## with your red pocket mobile phone number
e. Password: Not set
f. Server: Not set
g. MMSC: http://mms.sprintpcs.com
h. MMS proxy: 68.28.31.7
i. MMS port: 80
j. MCC: 310
k. MNC: 120
l. Authentication type: Not set
m. APN type: default, mms
n. APN protocol: IPv4/IPv6
o. APN roaming protocol: IPv4/IPv6
p: Unspecified
q. MVNO type: None
r. MVNO value: Not set
s. save changes
9. Set the Red Pocket APN as your active one.
10. reboot

Net10 APN Settings?
I am giving you how I went from point A to B in this post. My next post will be the correct settings for my new Sprint mvno: Net10.
After getting voice, data, sms and mms working in the rooted stock ROM, I install the xposed framework for Android 4. Reboot
Open Play store and install "Hidden Android Settings" and "NoHiddenPasswords". NoHiddenPasswords is an xposed tool, but does not show up if you do a search in the xposed manager app. Open xposed and Enable NoHiddenPasswords. Reboot.
Back-up your tweaked Stock ROM with TWRP.
Install Cyanogen. When Cyanogen boots up, go to Settings-"Mobile Networks", my educated guess is that the settings for
Data enabled
Data Roaming unchecked
Battery Saving Mode unchecked
Preferred network type: CDMA+LTE/EvDo
System select - set roaming mode to Home Only
Set CDMA subscription to NV
I can at least confirm those work with the two mvno's I have used: Red Pocket & Net10.
The first thing I tried was to the same settings as I showed in my prior post.
I tried changing 8.e. to ##########@net10.sprintpcs.com. Then I tried ##########@sprintpcs.com. Neither of those worked, so I knew I needed to find the value using some tool in the Stock ROM. I googled Android APN settings app, and found "Hidden Android Secrets". It has a APN settings viewer. When I looked at the ones in my phone, I saw some password fields that it would not show me without the help of NoHiddenPasswords.
Then I used Notepad++ on my laptop to copy the information shown in each access point in the stock rom on my phone. I did a new tab for each access point.
It seemed pretty obvious that at least 8e would need changed.
I tried changing 8e to ##########@net10.sprintpcs.com
I then tried ##########@sprintpcs.com
Voice works & SMS worked, but no data nor MMS over 4g.
I notice that none of the access points in my stock ROM has any reference to n.r6.ispsn. There is one with an APN n.t9.ispsn. That is very similar so I changed 8.b. to that. Miracle, I now have LTE data!
Unfortunately, though, the MMS is till not working over LTE.
In my stock ROM, there is one and only one APN with APN Type: default,mms
BTW, there is no space after the comma in the stock ROM, so I changed that.
I merged its values into my APN.
This did not kill my data; so, I tried sending and receiving MMS. Tada, that's it.

APN Settings for Net10
RandyB201 said:
... the correct settings for my new Sprint mvno: Net10...
Click to expand...
Click to collapse
Code:
1. Open Settings
2. click "Mobile networks" to access the settings
3. Data enabled checked
4. Data Roaming unchecked
5. Battery Saving Mode unchecked
6. Set preferred network type to: CDMA+LTE/EvDo
7. System select - set roaming mode to Home Only
8. Set CDMA subscription to NV
9. Create a New APN with these values:
a. Name: Net10
b. APN: n.t9.ispsn
c. Proxy: Not set
d. Port: Not set
e. Username: none
e. Password: none
f. Server: Not set
g. MMSC: http://mms.sprintpcs.com
h. MMS proxy: 68.28.31.7
i. MMS port: 80
j. MCC: 310
k. MNC: 120
l. Authentication type: Not set
m. APN type: default, mms
n. APN protocol: IPv4
o. APN roaming protocol: IPv4
p: Bearer: LTE
q. MVNO type: None
r. MVNO value: Not set
s. save changes
10. Set the Net10 APN as your active one.
To be clear, the username and password are not an empty / null string. They are the word "none" all lowercase letters...