Database Info

pocket iso help please

hi tried most versions and just says not applicable,has anyone got a link.
cheers folks

Google for fpsece and get it from there.

have done that mate,but it throws up dead links?

go to the following link
http://www.fpsece.net/forum2/download/file.php?id=9&sid=7c4ea5b11197b5f2352984630fd94fc8
it works i just tried!!

still getting not a valid application when i try to run it,any ideas?

phillyctr said:
still getting not a valid application when i try to run it,any ideas?
Click to expand...
Click to collapse
Here you go, version 3.2, just unrar anywhere you want (on your PC) and run the PocketISO.exe. Work for me..
http://rapidshare.com/files/340382160/PocketISO_32.zip

cheers for the help folks,so i can't install pocketiso on my phone?i take it i have to convert the roms on my pc then upload them to my sd card.sorry for being thick lol.

You run PocketISO on the PC.
Here's what I do to obtain best results with this program:
Select ISO
1. Tick "Enhanced XDA Detection"
2. Tick "Rip Xa Streams to MP3"
3. Press Analise ISO
4. Select "Rip" on the Media Found box for any Xa streams detected
5. Press Process ISO to start.
You'll end up with 2 files to keep --
gamename.img.ZNX
gamename.img.ZNX.table
Put these on your SD card and enjoy!

[SOLVED] - [Q] Fujitsu Simens loox N560 died after bad firmware

hi.
I'v got loox n560 that was upgraded to WM6.1-6.5 servel times without any problem.
the last time i did update, i did it accidentally with a bad firmware file(uncompleted download).since then, the device wont boot(just a white screen).and the pc wont recognize it.
any way to save it? or i made myself a nice paper weight?
thanks.

I think there was a way to put the N560 in bootloader mode by pushing some keys and soft-reset hole manually (the "monkey grip" it was called or something similar...) and with the file of the rom to be flashed in a SD card... perhaps you can google for information on this ancient -and more unsure that the cable one- flashing mode. Worth to try it better than have a paperweight...
Good luck!

I give you more information (shame that FIRSTLOOX information is not there anymore)
For manual bootloader mode: press On-Off button + left side button (voice recording) + stylus soft reset (for some seconds). Keep pressed On-Off and recording untill the dolphins appear.
I can't find references to flash from SD card. Anyway, for incomplete flashing, Newplowe gives this procedure:
"You should close process "wcescomm.exe" on PC in task manager. Then hold button record, power and puch reset after that you will come in boot loader. Run the program mtty.1.42 and select usb connect. If You will see the any error just start again mtty. Put command l c:\os_213u.nbf (You should put correct flash file in c:\ or use correct path to os_213u.nbf, l - like L but small). When it will done You should start PocketLOOX5xxFlashTool.exe and flash you PDA."
I got this reference from "http://forum.xda-developers.com/showthread.php?t=429148&highlight=flash+n560+card".
Good luck anyway.

this is very interesting...
i was able to put the device into boot loader mode and ran the command "L c:\os_213u.nbf" ("l" didnt work, but L did).
it did something to the device, a progress bar till the end of the screen.but the device didnt reboot.when i try to run POCKETFLASH program it couldnt connect to the device.
i runing windows 7, so i guess it the problem(ACTIVE SYNC is a XP PROGRAM).
i'll try installing XP on another computer and try this again.
thansks.

almost...
i have installed Windows XP just for this, and everything seems to go well, i connect with MTTY, put the l c:\os_213u.nbf command and the device respond.
the next stage i to flash with PocketLOOXN560FlashTool.
when i start it, i receive connection error, and then i go to recovery mode.the program try to communicate with the device, but i get at the end error that the ROM language is different than the language on the device.it says "(ENGLISH)" and there are also empty
()
Click to expand...
Click to collapse
at the end.
i doubled checked this with the original WM5 English rom, and its the same.
is there a way to change the language with MTTY?
any other ideas? its a shame to stop now after i can get a response from the device...
thanks.

The only idea I have is to check if after the failed flashing your N560 is still an "english" one. Perhaps the defective rom has changed the language of your device to something else...
If your device respond to communication with the XP computer, perhaps you could make a rom dump (in newplowe's page you can got tools for doing that) and check in the dump file with an hex editor which language actually has. You can always check newplowe's blog and forum (with google translator ), or ask him

Sorry i didnt post an update.
i have fixed the rom language.it had a gibberish mark at the end of the ENGLISH, after i have fixed that, .the device was flashed correctly and its working!
thanks for thelp guys

[q] help me , please

hi friends
can anyone help me and give me the xperia play game's data :
bruce lee , fifa 10 , star battalion , sims 3 and crash bandicoot
my little brother formatted my SD card and i lost every thing , i've searched on google but can't find any data for xperia play.
i wish somebody was here to copy the SD data
please , help me , if you can upload or send link to me .

You cant delete the apk from the sd card, because they are stored on your phone.
Simply select them from the Game menu and re-download the data via wi fi, or connect your phone to PC Companion and update the software, which will download all the shipped games again.

ok
i'll try via pc companoin
thanks sooooooooooooooooo much
you know , can i try it on SEUS ? cause that is faster ?

oh my god
it doesn't work with SEUS , still not working
there was an option on SEUS that allow me to factory reset and reinstall
what shoul i do

you dont need to format anything.
Just run the application and it will tell you that you need to download the game data. Press ok and then it will download it. I recommend doing it over wifi.

RacecarBMW said:
you dont need to format anything.
Just run the application and it will tell you that you need to download the game data. Press ok and then it will download it. I recommend doing it over wifi.
Click to expand...
Click to collapse
i'm sorry , but i
've tryed to download via wifi ,but that was successfull only on fifa and sims 3
can't download carash bandicoot , bruce lee and star battlion ,
is there any link to download that ?

Go to a file manager, and delete crash bandicoots zpak. It's found in sd, android, data, com. Sony. Ncea
Find for other games aswell
Sent from my Xperia PLAY R800i using XDA App

I find I loose my wifi every time the phone goes to sleep mode. It still says connected but can't download or browse the web. I have to disconnect and reconnect. On large downloads it's a real pain.

ncaissie said:
I find I loose my wifi every time the phone goes to sleep mode. It still says connected but can't download or browse the web. I have to disconnect and reconnect. On large downloads it's a real pain.
Click to expand...
Click to collapse
You need to change your WIFI sleep policy. Go into WIFI settings, press menu, choose advanced. Under WIFI sleep policy, choose never.
Sent from my R800i using Tapatalk

AndroHero said:
You need to change your WIFI sleep policy. Go into WIFI settings, press menu, choose advanced. Under WIFI sleep policy, choose never.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
Thanks for the tip Andro but mine is still set at Never. I don't know why this doesn't work. Maybe it is a bug. I'll call SE.

Reflash your
firmware and the games will be back...its much faster then calling Sonybecause I doubt that they would be able to help you. Use flashtool.
Sent from my XPlay using XDA App.

Trend plus and Folder mount is catastrophe!

Hi, so i triend program called: Folder Mount.
After downloading this program, it's shows that my device configure not correctly so there was a button that they can fix it and reboot it.
After rebooting my google play, file manager, gallery, Memo, and others programs stopped working.
When i'm trying open Device storage it's shows /storage/emulated/0 (and nothing in there) and automaticly goes in /storage.
Anyone can help me with that?
I triend even factory restart.

Eimantux said:
Hi, so i triend program called: Folder Mount.
After downloading this program, it's shows that my device configure not correctly so there was a button that they can fix it and reboot it.
After rebooting my google play, file manager, gallery, Memo, and others programs stopped working.
When i'm trying open Device storage it's shows /storage/emulated/0 (and nothing in there) and automaticly goes in /storage.
Anyone can help me with that?
I triend even factory restart.
Click to expand...
Click to collapse
ok flash stock rom with odin.
go to samsung updates dot com or sam mobile dot com to get stock rom...
search google for exact website address.
good luck

Killwish said:
ok flash stock rom with odin.
go to samsung updates dot com or sam mobile dot com to get stock rom...
search google for exact website address.
good luck
Click to expand...
Click to collapse
Thank you! It's helped.
But there's one more question that i need to ask you.
how to make that extsdcard read game caches? ._.

unlock Android box with restricted use to one IPTV app

Hi All
I have my android box that is very restricted, I cant add any apk, I cant even add a google account it just crashes, File browser is not available EVEN internet browser, only four applications showing: ATN iptv, Dev Tools, Music, Download (which is empty), and Settings. I can reset the device to factory but it will come back exactly the same. I can use toothpick button but it will give an image of (Android with error sign) then will continue as normal to home screen. it run jelly bean firmware. 4.2.2 build number ATN-1.0.6 2016-09-26 242441.
What can I do now? I need to be able to add any apk package I like, when I connect USB stick nothing happens...

kiwibird said:
Hi All
I have my android box that is very restricted, I cant add any apk, I cant even add a google account it just crashes, File browser is not available EVEN internet browser, only four applications showing: ATN iptv, Dev Tools, Music, Download (which is empty), and Settings. I can reset the device to factory but it will come back exactly the same. I can use toothpick button but it will give an image of (Android with error sign) then will continue as normal to home screen. it run jelly bean firmware. 4.2.2 build number ATN-1.0.6 2016-09-26 242441.
What can I do now? I need to be able to add any apk package I like, when I connect USB stick nothing happens...
Click to expand...
Click to collapse
Does debug usb work? Or something like Fastboot/ADB?

I connected the box to the computer with USB cable (both ends the same) but nothing happened. I wish it was as simple as PC, formating and re install Android OS lol.
not sure about Fastboot or ADB.
Unknown source option is ticked, but like I said nothing happens when I insert a USB. cant even download from net or open any browser.

New update received, problem fixed, Thanks guys.

Atn box
kiwibird said:
New update received, problem fixed, Thanks guys.
Click to expand...
Click to collapse
Hi
I have samme ATNbox, (and others called atn gold/platinum) have you tried to use another android version on the box? I am facing same issue, can´t add any app or change Android version.
Could you please tell me what you did to make it work?
Thanks

Need help please
I have an Androide box named ISatPlus, I was subscribed to iptv in 2015 but not anymore.
The box has received an update from ATN and now am not able to install KODI or any other application. The system keep deleting all new application I install.
I cant even install new firmware it fails after few sconds. Anyone can help or suggest a solution?
The CPU is a dual core ARM Cortex-A7, and the platform is BIGFISH???
thank you

hello how can you roast atn boxes?
Thank you

this is an old thread, however, if anyone still interested in reprogramming "most" of the ATN boxes, there is a way to customize it and make it a basic android box which you can use normally with any app, however most ATN receivers are very old and not compatible with newer versions of android, only android 4.x.x depending on the box you have