Related
While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
1. Backup your pocket pc using Sprite Backup and backup your original ROM using the SD card method http://forum.xda-developers.com/viewtopic.php?t=19500&sid=446b03c5f2a384e62c7905557ddcb450 .
2. Download the appropriate “shipped-rom.exe” file, such as ftp://xda:[email protected]/MA_DANG_WWE_10600_115_10500_SHIP.exe . DO NOT run it directly.
3. Right click to use winzip (or winrar) to unzip all the files into a directory of your choice.
4. Download MaUpgradeUt_noID.exe from http://www.ce4you.cz/forums/downloa...les/forums/cz/0000053752/MaUpgradeUt_noID.exe and save it in the same directory.
5. Disable USB in ActiveSync.
6. Set your ppc to bootloader mode (keep pressing both camera and on/off switches while resetting).
7. Connect pocket pc through USB.
8. Run MaUpgradeUt_noID.exe on your PC.
9. Don't get panic when the screen of your pocket pc goes dark. Use a torch and you can see the wording "USB ....".
10. On completion, hard reset your ppc (keep pressing on/off switch while resetting).
Follow-up Procedure:
1. After hard reset, you may choose to skip the installation of the Extended ROM files (especially the Default_Patch_bthusb.CAB file which might cause occasional bluetooth malfunction) by soft resetting the ppc, after the screen alignment routine and before the "in 3 seconds" message disappears.
2. You can re-install the splash screen of your choice by downloading the appropriate cab file. ftp://xda:[email protected]/Magician/Splash Screens/
3. You might have to re-install all softwares one-by-one, unless you are experienced in using the advanced features of Sprite Backup.
4. Copy the appropriate autoconfig files to get the right GPRS settings. For example, if you use CSL1010 in Hong Kong, download from ftp://xda:[email protected]/Magician/Extended-roms/O2_Mini_HK_Chinese/ : 11O_ALL_CHT_103170.sa.CAB, CAB-Customization-Magician-O2Asia1010-06Jan05.CAB, and AutoConfig.txt into the windows directory of ppc and run autoconfig.
very clear guide but how do i unzip the MA_DANG.......SHIP.exe file it says no archives found ? :?
dont unZIP them; if youre using winzip forget about it. get yourselfwinrar, right click on exe and 'extract to...' and youre done man!
regards,
Quappo
i followed your instructions..however when i run MaUpgradeUt_noID.exe it states "checking the information on your device" and thats it. it doesnt do a thing. any advice?
Topazworm said:
i followed your instructions..however when i run MaUpgradeUt_noID.exe it states "checking the information on your device" and thats it. it doesnt do a thing. any advice?
Click to expand...
Click to collapse
the same here...
ik looks like my downgrade (yes, a downgrade from iMate 1.06 to 1.03) starts and after 30 seconds it says it's ready, but notting happend!
Re: Summary of the USB MaUpgradeUt.exe methold of ROM Upgrad
Talents said:
While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
.....
5. Disable USB in ActiveSync.
.....
Click to expand...
Click to collapse
How can I disable USB in ActiveSync?????????????
Tnks,
Ale
Click to expand...
Click to collapse
Re: Summary of the USB MaUpgradeUt.exe methold of ROM Upgrad
AX3L said:
Talents said:
While a lot has been written, the following should provide an easy-to-follow guide.
Flash the new ROM
.....
5. Disable USB in ActiveSync.
.....
Click to expand...
Click to collapse
How can I disable USB in ActiveSync?????????????
Tnks,
Ale
Click to expand...
Click to collapse
under connection settings, just uncheck allow USB connection,
Click to expand...
Click to collapse
ENJOY!
http://forum.xda-developers.com/showthread.php?t=522179
G
Lovely jublee
Where do i find the latest Microsoft net frame .....?
yup, this is really a funny and useless.
MS NetF 3.5
jonas9000 said:
Where do i find the latest Microsoft net frame .....?
Click to expand...
Click to collapse
Here you go
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Give the program time to install and soft-reset afterwards.
Aussie
aussie1234 said:
Here you go
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
Give the program time to install and soft-reset afterwards.
Aussie
Click to expand...
Click to collapse
Install the same way as a .cab file on my memcard ?
NetCF Install
Hello
No this one needs an ActiveSync (Windows XP) or Windows Mobile Device Centre (Vista/Win 7) active connection to your phone first. Then double click the msi file. It acts as an install file. I recommend reading the install notes on the Microsoft page the link takes you to.
I tried to upload the smaller cab file to my post but it kept returning error messages.
Found this, it may help you: http://forum.xda-developers.com/showthread.php?t=347537
All the best
Aussie
Ok, done ! Works fine thanks
I have recreated this method based on this post to make it much easier for everyone to get this setup on their devices with complete details.
Confirmed Working With
1. Windows 7
2. Mac OS X 10.6 (Snow Leopard)
3. Mac OS X 10.7 (Lion)
4. Other OS versions possible just not yet confirmed/tested (only thing stopping is driver support)
How to Enable UMS Mode on your Verizon Galaxy S III
1. Make sure you are currently rooted ***VERY IMPORTANT***
2. Download and install the Samsung Official Verizon Galaxy S III USB Drivers - Link Here
3. Download and install GScript Lite from the Play Store onto your device - Link Here
4. Download the Verizon Galaxy S III UMS-MTP Switcher Scripts to your computer - Link Here (or attachment at bottom of OP)
5. Create a folder called "gscript" on the root of your internal storage (/sdcard partition)
6. Extract the two scripts from the zip file (from step #4) into that folder on your device - Screenshot Here
7. Open GScript Lite on your device
8. Press the Menu key on your device and select "Add script"
9. Press the "Load file" button and select "UMS Mode.sh", then press the "Save" button and the UMS Mode script will be added to the list
10. Press the Menu key on your device and select "Add script" again
11. Press the "Load file" button and select "MTP Mode.sh", then press the "Save" button and the MTP Mode script will be added to the list
12. Select the "UMS Mode" script from the list and allow Superuser for root access
13. The script will now run and do not worry if GScript Lite force closes at the end as this is perfectly normal
14. On your Windows 7 computer you will see it will try to install "SAMSUNG Mobile MTP Device" as one of the drivers and fail *this is normal*
15. Go into Device Manager on your computer, right click "SAMSUNG Mobile MTP Device" and select "Properties"
16. Click on the "Driver" tab and click the "Update Driver" button, a prompt will then come up
17. Select "Browse my computer for driver software", then select "Let me pick from a list of device drivers on my computer" on the next screen
18. Select "USB Mass Storage Device" as the new driver from that list and finish up that install
19. At the end you will see something like this on your computer - Screenshot Here
20. Windows will install final drivers automatically and a new "Disk drive" will show up on your computer, this is your external SD card on your device
21. If you want to return to MTP Mode, just select "MTP Mode" script from GScript Lite on your device and after it force closes you will be back to normal
Click to expand...
Click to collapse
Benefits of UMS Mode
USB Mass Storage (UMS) Mode used the old way of managing USB storage (like Galaxy S II and so on) before that changed to Media Transfer Protocol (MTP) Mode (aka. Device mode) with the Samsung Galaxy Nexus. The benefit of UMS Mode is that it will work with special devices that try to read your phone like a car radio head unit will now be able to read the songs, pictures, videos, etc through the USB port properly, as well as your TV (if it has USB support of course), among many other devices. Also it's a much more reliable method of transferring files on your computer since it's basically direct access to the SD Card as opposed working through a special protocol with MTP or PTP Mode. This mod will enable your SD Card to show up as a regular disk drive instead of a device on whatever you plug into with a USB port. Hope that helps explain it a bit without being too technical. For details on why Google decided to switch to MTP Mode see this article.
Click to expand...
Click to collapse
Awesome, sweet write up. :good:
I may have to try this. The MTP doesn't work on my Mac for some reason. Android file transfer just crashes whenever I try it.
Do you have to enable the script at boot?
Explanation in OP very summary.
Plug the phone where? In the computer or the AC adapter?
If in the computer then why is necessary that to run the script.
If you don't use the GScript Lite then what do you use to run the scripts (Terminal?).
If you copy the script to the phone then the files should have which extension? I mention that because there is nothing attached.
Do not forget that you're dealing here with a lot of noobs.
Please be so kind and review the OP.
If the script works correct then this is a big deal and I congratulate you but do it like a pro.
Cheers.
jb_alphamale said:
Do you have to enable the script at boot?
Explanation in OP very summary.
Plug the phone where? In the computer or the AC adapter?
If in the computer then why is necessary that to run the script.
If you don't use the GScript Lite then what do you use to run the scripts (Terminal?).
If you copy the script to the phone then the files should have which extension? I mention that because there is nothing attached.
Do not forget that you're dealing here with a lot of noobs.
Please be so kind and review the OP.
If the script works correct then this is a big deal and I congratulate you but do it like a pro.
Cheers.
Click to expand...
Click to collapse
OP only copied and pasted someone else's thread/work.
http://forum.xda-developers.com/showthread.php?p=28670285#post28670285
Yeah I figured that out.
Now we have the link.
Thanks Beknatok.
Edit: Well it does not work on Verizon SIII.
jb_alphamale said:
Yeah I figured that out.
Now we have the link.
Thanks Beknatok.
Edit: Well it does not work on Verizon SIII.
Click to expand...
Click to collapse
Well lets try and get it to work. Some dev must want this too.:fingers-crossed:
jb_alphamale said:
Yeah I figured that out.
Now we have the link.
Thanks Beknatok.
Edit: Well it does not work on Verizon SIII.
Click to expand...
Click to collapse
I just tried it and it works perfectly.
This part is very important:
If Windows fails to find the correct driver, go to the Device Manager and manually set it to use the driver, "USB Mass Storage Device". It seemed to try to stick with the MTP driver in my case.
Click to expand...
Click to collapse
OK here is what I did.
Installed Script Manager free from the market.
Copied both scripts into sdcard\scripts folder.scripts folder created by myslef.
Opened the mass storages.sh script and run it.
I've got bunch of error messages that it cannot find this and that.
The phone was connected to the computer.
If necessary I can screenshot the errors.
open1your1eyes0 said:
I just tried it and it works perfectly.
This part is very important:
Click to expand...
Click to collapse
jb_alphamale said:
OK here is what I did.
Installed Script Manager free from the market.
Copied both scripts into sdcard\scripts folder.scripts folder created by myslef.
Opened the mass storages.sh script and run it.
I've got bunch of error messages that it cannot find this and that.
The phone was connected to the computer.
If necessary I can screenshot the errors.
Click to expand...
Click to collapse
Don't use those scripts, I have issues with them as well. Just copy/paste the OP text into your own script using GScript Lite.
OK let's try. I'll report back.
Edit: OK I did what you proposed. Created the script in GSript Lite and saved then ran. Nothing happens. After I run it GScript FCs. I'm giving up.
This is so simple that I don't think that I'm messing up something.
open1your1eyes0 said:
Don't use those scripts, I have issues with them as well. Just copy/paste the OP text into your own script using GScript Lite.
Click to expand...
Click to collapse
jb_alphamale said:
OK let's try. I'll report back.
Edit: OK I did what you proposed. Created the script in GSript Lite and saved then ran. Nothing happens. After I run it GScript FCs. I'm giving up.
This is so simple that I don't think that I'm messing up something.
Click to expand...
Click to collapse
GScript does have force close issues but don't worry, it still runs as long as you don't see any errors when it's done.
I have just extracted the working GScripts I created and added them to OP for anyone who wants to import them into their GScript Lite. Just create a folder called "gscript" on your internal memory "/sdcard" partition and put those two .sh files into that folder. Then just use the app to add each of them as a new script (load file).
If Windows fails to find the correct driver, go to the Device Manager and manually set it to use the driver, "USB Mass Storage Device". It seemed to try to stick with the MTP driver in my case.
Click to expand...
Click to collapse
Can someone help me with this part? I have no idea how to do this. I feel so dumb.
Please be informed that I have completely updated and rewrote my own guide for the OP. You will see all details and screenshots necessary to get this setup. If something is not clear please feel free to let me know and I will try to answer as best as I can. Please be advised that this has only been tested and guaranteed to work 100% on Windows 7 based computers so far. I cannot confirm for Windows XP, Mac OS X, Linux, or other devices. If someone can test this elsewhere would be greatly appreciated. Hope this helps you guys.
works perfect/
Great!
Worked great for me. :good:
nice
So what does this enable you to do? Browse the entire internal memory when connected to USB, opposed to just the microSD?
This will enable your SD Card to show up as a regular disk drive instead of a device on whatever you plug into with a USB port. This was the old way of managing USB storage before that changed to MTP Mode (device mode) with the Samsung Galaxy Nexus. The benefit of UMS is that it will work with special devices that try to read your phone like a car radio will now be able to read the songs through the USB port, also your TV (if it has USB support of course). Also it's a much more reliable method of transferring files on your computer since it's basically direct access as opposed working through a special protocol with MTP Mode. Hope that helps explain it a bit without being too technical.
Found this today: http://forum.xda-developers.com/showthread.php?t=1711009
Hi,
I have uploaded a working version of Win86emu 0.6 ready for working in Windows RT 8.1 with jailbreak: http://www45.zippyshare.com/v/iMffGf8P/file.html
Instructions:
1. Extract all files to c:\ (it will create a x86node folder)
2. Execute c:\x86node\install\x86node.reg
3. Run c:\x86node\windows\postinstall.exe
4. For Windows 8.1, copy c:\x86node\Install\Windows 8.1\x86node\Windows\SystemNT\ntdll.nt.dll to c:\x86node\Windows\SystemNT\ntdll.nt.dll and override the current dll.
After this, you can run c:\x86node\windows\launcher.exe and choose a x86 exe to run (e.g. c:\x86node\windows\regedit.86.exe)
Edit: I forgot step 4
Attempting to run anything results with this error
The procedure entry point RtlConvertUiListToApiList could not be located in the dynamic link library C:\x86node\Windows\SystemNT\ntdll.nt.dll
This error comes up a few times after clicking through the application may actually run but wont function as intended.
Winamp 2.95 Installs, runs and plays Mp3's
CPU usage is around 13% idle 260MB ram usage
VLC 0.7.2 installed, runs in a command line only, wont play anything.
aq3e said:
Attempting to run anything results with this error
The procedure entry point RtlConvertUiListToApiList could not be located in the dynamic link library C:\x86node\Windows\SystemNT\ntdll.nt.dll
This error comes up a few times after clicking through the application may actually run but wont function as intended.
Winamp 2.95 Installs, runs and plays Mp3's
CPU usage is around 13% idle 260MB ram usage
VLC 0.7.2 installed, runs in a command line only, wont play anything.
Click to expand...
Click to collapse
Yes, I forgot the forth step. I have edited the info.
lots of unhandled exceptions when I try to run exe files
Qiangong2 said:
lots of unhandled exceptions when I try to run exe files
Click to expand...
Click to collapse
Have you tried to run the included regedit.86.exe file?
yopablo said:
Have you tried to run the included regedit.86.exe file?
Click to expand...
Click to collapse
Yes, It works fine
Qiangong2 said:
Yes, It works fine
Click to expand...
Click to collapse
Then, win86emu should be working ok. Not every app is supported. Check this thread http://forum.xda-developers.com/showthread.php?t=2259449 for compat suggestions
I know, but it would be nice if you could include msu.dll that's the main problem (if it's possible to include)
Is this still being based off of ReactOS?
Edit: yes it is, too bad we couldn't get mamaich back on board to continue their development of this.
[Removed]
The game.com emulator works perfectly on win86emu I don't know if I'm allowed to post it, but you can find the emulator on google with all of the roms and the instructions to use it have fun!
windows rt sound
Someone knows how to run cubase with a Emu??? Please help me
Error
I can't open .exe files on my RT 8.1 I have done as was shown.....
Hi,
I am getting an error : "Windows cannot verify he digital signature for this file" .
Does anyone know of a solution??
NinaLaRebel said:
I can't open .exe files on my RT 8.1 I have done as was shown.....
Click to expand...
Click to collapse
Jailbreak or enter test mode.
hey guys,someone know how to run starcraft with win86emu? When i try i get error
---------- Post added at 09:59 PM ---------- Previous post was at 09:55 PM ----------
Hey guys,someone know how to play starcraft with win86emu?
Hi, i have a lumia with windows rt, i am trying to run chrome or firefox or opera but the compatibility set is to old (windows xp sp3), do you know how to properly change reg entries for a newer compatibility?
Thank you for this, it works surprisignly well.
Hello, I've downloaded the files and tried moving them around and have encountered a couple of issues that stop me from going forward.
1. I wasn't able to move all the System32 dll files. It said I didn't have permission.
2. After running the after install file I was told that the file ""Windows cannot verify he digital signature for this file" .
My boss wants to get Google Chrome on the Windows RT. I think I've seen in a video that a guy was able to get Chrome on his RT, but he didn't elaborate on the process.
Any and all replies are appreciated. Thank you
Ikupasuy said:
Hello, I've downloaded the files and tried moving them around and have encountered a couple of issues that stop me from going forward.
1. I wasn't able to move all the System32 dll files. It said I didn't have permission.
2. After running the after install file I was told that the file ""Windows cannot verify he digital signature for this file" .
My boss wants to get Google Chrome on the Windows RT. I think I've seen in a video that a guy was able to get Chrome on his RT, but he didn't elaborate on the process.
Any and all replies are appreciated. Thank you
Click to expand...
Click to collapse
Chrome does not run on RT and it never will
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Update your EFI BIOS
Install Android 4.4.4 (Stock & RemixOS)
Disclamer: This process might contain ROM hacking, this is for advanced users.
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
2 Flash Drives (1Gb or more, and 4Gb or more)
OTG cable
USB Hub (3 Ports recommended)
WinPE for Win10 (Downloadable on my drive)
Win10 32 bits ISO (link in tutorial)
THIS IS THE LINK I'M REFFERING TO WHEN SAYING "THE DRIVE"
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
What to do :
1.) Start by plugging the first usb drive (1Gb or more) into your computer, and format it to FAT32 using any formatting tool,
MAKE SURE YOU CHANGE PARTITION TABLE STYLE TO GPT, EITHER YOU WILL END UP WITH ERROR ON WINPE INSTALL
2.) Now you need to download WinPE from the drive, go to your device folder, then go into the windows folder, and download it.
Once you downloaded it, uncompress. You will find a "WinPE_XX" folder inside, take all of its content, and extract it to your freshly formatted drive.
Heres what looks like the root of your key:
3.) Your USB Install Drive is ready. You can plug it off and save it for later.
You now need to download a 32Bits ISO version of windows, if you already have one, it should work, if you don't, you can download it from Microsoft Website
4.) Now take your downloaded ISO, and mount it with either windows, daemon tools, PowerISO, or any Disk Image Manager.
Once mounted, you need to navigate to the X:\sources\ folder, and extract "Install.wim" anywhere on your PC. Thats the windows system we will install.
5.) Go to the drive, into your device folder, go to windows folder, and download the "Image_Recovery_Extra.zip" you can find there.
It contains recovery + Files mandatory for install (because the Windows PE we're using is hacked from Cube).
6.) Take your second USB Drive (of 4Go minimum, it needs to hold windows), and format it to NTFS Filesystem with any formatting tool.
Now you can extract the "images" folder of the previously "Image_Recovery_Extra.zip" downloaded (KEEP THE IMAGES FOLDER THIS TIME)
And also copy inside that "images" folder your previously extracted Install.wim image file.
7.) You're good to go ! You can unplug the keys from your PC, and start working on the tablet as of now !
You need to boot to BIOS settings, using "ESC" key at startup of tablet. Once there, go to SCU Settings, the bottom right square.
You need to set your primary boot to "Windows" in the boot tab, or the key won't boot. If it is already, you can exit SCU and start step 8.
If it is not, just select it, then press F10. Tablet should reboot. Press ESC again at startup, and start step 8.
8.) Now everything is straightforward: Just select "Boot from EFI File", select your USB key in the list, and go to EFI folder, then go inside BOOT folder, and select "Bootia32.efi"
The tablet should boot to a command prompt (it lags much, but we will install drivers later) and it should install windows automatically then shut down.
If install fails, update your BIOS and try again or post here for some help.
Preparation looks like this:
Working device looks like this:
9.) Now you can get rid of the installation USB keys, you only need mouse and keyboard. Fire up your tablet freshly flashed, it should boot to a chinese logo with a circle under it. it might reboot a few times, it is actually expanding filesystem and populating your win10 install. Wait until you end up in language screen. if it shuts down, put it on again if it does not automatically.
10.) Windows is ready, now follow the instructions, language, set your name, until you end up on the windows desktop. When you are here, you need to download from the drive the Driver Package for windows 10, which is located inside the driver folder, inside the windows folder of your devices folder. It sould be named "Z37XX_CPU_Chipset.zip"
Extract it on the tablet, and run the included "Setup.exe". When finished, reboot your tablet.
you can also find various driver i added for os switch and gyrometer
Congrats! You successfully Installed Windows 10!
I do not guarantee it works on every device, nor with every windows version, but it works in my installation with a regular Win10 x86 Pro.
There might be some upgrades to do, as I personnally hacked the WinPE that is available on Cube's site, with Windows 10 ADK WinPE,
so feel free to report bugs, enhancements to this method. and report cube for not doing this so far !!!
Regards,
Max.
Top! Thank you!
I had exactly the same issue and want to fix it this weekend. My I6 arrived on Thursday. Now I follow your instructions to update to Windows 10.
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
stalker2106 said:
Hi, glad it is helping! tell me if you are having issues, or if some steps aren't detailed! i'll upload some photos later. if you need something for this tablet feel free to ask
regards
Click to expand...
Click to collapse
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
scharrrfi said:
Hey Max,
now I have the first problem.
On my Windows 10 Image I do not have any install.wim file. There is only a install.esd (about 2GB) file in the \sources\ folder. But this file is not possible to extract with 7zip. The only *.wim file in the directory is the boot.wim. What have I to do?
Click to expand...
Click to collapse
Alright, i don't know what ISO of windows 10 you have, but i found a tutorial on how to convert esd to WIM, so no worries (http://www.intowindows.com/how-to-easily-convert-install-esd-to-install-wim/) furthermore, i would recommend using PowerISO for extracting the file, as i'm not aware of how to extract from ISO with 7zip
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
scharrrfi said:
Okay, thank you. With this it works
But I have some error when I boot the WinPE on step 8. I get the message: "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f""
On this point the tablet do not recognize any keyboard command.
Click to expand...
Click to collapse
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
stalker2106 said:
What is that \EFI\Microsoft\Boot\BCD you are trying to boot from ?
You should select \EFI\Boot\bootia32.efi. If it does not work make sure your BIOS is at version 206 (its my case, so i guess it can be this) and if not, upgrade it with the provided tutorial, maybe you'll have more luck with that ? You can check its version on android by going to device info in settings and check IFW Version.
EDIT: The WinPE media might be trying to access your hard drive EFI folder to use its BCD configuration, check that too, maybe you can format that EFI partition before booting to winpe ?*
EDIT2: Check BCD integrity maybe, 262 144 bits is what it weights on my side
Click to expand...
Click to collapse
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
scharrrfi said:
I do not know, why it says \EFI\Microsoft\Boot\BCD. I selected the correct .efi-file.
But I think my tab is now gone. I have try the bios update from 203 to your 206. It have flash completed to 100% and turns the tablet off. I wait a few minutes and then I try to turn it on again for another try to install Windows 10. But it will not turn on again. It does also not recognize the charger anymore. I think I brick the i6 with the 206 Bios. What a bother!
Click to expand...
Click to collapse
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
stalker2106 said:
Ok, if the process went 100%, then there is a high probability it is not bricked.
Remember that still, you can boot using DnX mode holding power and volume +.
What do you mean by "it does not recognize the charger" ? when you plug it, the charging led does not light up ?
Thats very odd. because its not controlled by bios but only hardware derivation I guess.
please keep me tuned in on that !!
Edit: FYI I used the exact same BIOS on my model, which is a i632GB15378650186.
Click to expand...
Click to collapse
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920293. I think it is an older one.
scharrrfi said:
DnX mode does also not work. And yes i mean, that the LED does not light up at all.
My model is i632GB15224920290. I think it is an older one.
Click to expand...
Click to collapse
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
stalker2106 said:
Wow. You mean there are older model with other BIOS System ?
I'm so unhappy to hear your story. I hope i can help to fix it !
Whatsoever, how can any BIOS accept flashing itself if its not corresponding ?
Good thing you point out there, but c'mon, how can your tablet be bricked if the process went OK...
Maybe you can contact cube about it ? Maybe if you hold power long enough it will turn off ?
Once the tablet did this to me, had to hold power 10s to get it back off !
EDIT: good thing I remember is that i had it shipped with 205 BIOS, so i guess you're right and its an older model you have. Still, I have spare BIOS Firmware 204 that I flashed for testing purposes that also worked flawlessly !
EDIT2: found that there might be tons of differents models like raspberry pi, look this one does not match with any of ours : http://winphonetech.com/wp-content/uploads/2015/08/cube.jpg or maybe it is just a serial number generated from the # produced or the current date of prod ?
Click to expand...
Click to collapse
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
scharrrfi said:
Yes, I think you are right, that the last numbers are any kind of a serial number. Do you have another Bios file? On the web I found only the 201. I can try to buy an ISP programmer and reflash the tablet.
And I have tried different buttons combinations on hold in hope that the tablet wake up again. But still nothing
Click to expand...
Click to collapse
Thats some freaking bad news ...
I uploaded 204 BIOS to the drive... cheers, fingers crossed.
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
dahuzi said:
It's a great news that the I6 Air is possible to upgrade to Win10 now. But before taking action, I have one question to clarify. After the upgrading, is the Android system still there and can switch over freely as before?
Click to expand...
Click to collapse
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
stalker2106 said:
Yeah, windows fill the partition space that is already configured, it means even if you resized your android to a 8 Gigs partition, the windows will not erase it !
For the switching process, it is even better because YOU install the switcher, and configure it the way you want (dektop shortcut, taskbar button, ...)
I can bring windows screenshots on purpose if needed
regards,
Stalker2106.
Click to expand...
Click to collapse
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
dahuzi said:
Thanks for clarification, another question, how about the system activation? Will the system become activated automatically?
And moreover, the drive folder you provided has no more WinPE available. Please check.
Thanks again.
Click to expand...
Click to collapse
Hi, bad manipulation yesterday led me to delete archive from drive, but its uploading again !
I tried again the tutorial because of the problem of " scharrrfi" to check if its not broken in any manner, and it worked flawlessly !
Furthermore, the system is yours, and therefore, is not activated by default, it asks for a serial key !
Files should be on the drive later today
EDIT: The files are up on the cloud !
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
scharrrfi said:
Now I wait for my ISP programmer. But I know, why I get first the message "The boot configuration data for your PC is missing or contains errors" File: \EFI\Microsoft\Boot\BCD Error code: 0xc000000f"". I found the solution in another forum. There was a problem with the formatting of my USB stick. I have to format it with an partitioning tool to GPT. And then it should work.
If I know this before, I have not to try to flash the bios...
Click to expand...
Click to collapse
Yeah, I admit that was kind of my fault telling you that upgrading your bios would change anything in your boot configuration, i'm so sorry
Let's hope this will work, still hope, windows 10 will make its way to your tablet no worries !
After some days of using it i report some glitches though:
Orientation sometimes get rekt, i dont know why but you have to set it manually...
Also the tablet is not as responsive as it is on android, but I guess power consumption is higher on windows, as it heats much more !
Sometimes i touch the part near the lens and it feels really hot !
Btw when on low battery, the power saver settings got me doubling my battery time, which is nice !
And on idle, locked, the battery charge way faster than on android.
Hi I have an other error - if I boot with the bootia file I got short 4 error messages: UEFILINUX ERROR [uefi_get_battery_status:121] Failed to get battery status - und error 160, 121 again and 149, all error with the battery. I haved update the firmware from 201 to 206. The battery is over 90% full in windows. Have you an idea whats wrong?