Probably a totally newbie question but when I hit install I get
MAKE SURE YOUR PHONE IS UNLOCKED
PLEASE MAKE SURE YOU ARE CONNECTED TO PC ZUNE OPEN
Well I am connected to PC, Zune open and lock screen unlocked, phone is unlocked as I sideloaded Screncapture V3 Via Deploy.
What am I doing wrong? Phone is LG E900?
Same problem here...
Tom's XAP Installer, 1.2, isn't working for me either. I even went through the ChevronWP7Labls unlock again and still get the same error.
Has same issue before
I had the same issue.
After chevronlab unlock,
connect phone to zune,
once phone is detected in zune and synced
unlock the screen and install the xap file then you wont get error.
Phone is locked or phone is pin locked means phone screen is locked.. just need to unlock screen
Related
Hi All,
Out of the blue my HTC Vox stopped booting. I mean, it would load to the windows mobile screen and then stay there till eternity. Removing my memory card and SIM also did not help! I then tried the hard reset option.
Even after hard reset it sometimes boots(1 out of 15 times) and when it does...it hangs after 10 to 12 minutes. Still have not put my sim n memory card into the phone.
I tries flashing the ROM using the ARA 1.27 ROM. After it rebooted to the bootloader, the flash utility gave a connection error! It did not connect to ActiveSync and stayed at the bootloader screen.
I still do not know how to flash it successfully.
If anybody can help me out, I'll be extremely grateful!
Thanks
Prateek
take the battery out, put it back.
connect your Vox (USB).
Hold the camera button and turn on your Vox.
you should see a red, blue and green screen (if my memory works as it should) and the computer should recognize the device, though you won't be able to explore it with activesync.
Run the SDA_ApplicationUnlock thingy (if you need to)
now try flashing the device.
If it flashes but after 3% restart, you need to do a CID unlock right before flashing.
hope that helps.
Invalid Vendor ID
Hi MoRkusReX,
Its giving me Invalid Vendor ID. How do I CID unlock it?
Thanks,
Prateek
http://forum.xda-developers.com/showthread.php?t=330909
first post , download the last file:
Vox USPL- CID BYPASS.zip
There a Readme file in there, you should read it.
post back where you're done.
No Luck!
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
Only once I have been able to boot into my OS and followed the instructions given in the link. The phone comes to the Linux black screen and then switchers off. Then the ROM Update Utility with which i'm trying to update the ROM gives an error that "cannot connect to the phone".
So, now I need to flash my ROM from the bootloader itself. Have managed to get mtty and connect to the phone. But even trying ResetDevice command, the phone does not boot.
Can you tell me the exact steps to flash a new ROM from the bootloader itself including CID unlocking? Can it be done??
Thanks,
Prateek
prateekswarup said:
Hi MoRkusReX,
Since my phone is not booting into the OS thus I cannot use the UPSL_CID provided in the link.
...
including CID unlocking? Can it be done??
Thanks,
Prateek
Click to expand...
Click to collapse
yes it can be done.
you don't need to boot to OS, I couldn't either. after the steps from my first post here, run the uspl_116_jockyw.bat file. follow instructions.
that will unlock the CID.
Now the VOXs' screen should be white or so... then you run the ROM update thingy.
Hi..
I connected with the usb and got the bootloader screen.
tried running the SDA unlock program...the button to unlock the phone is grayed out. Cant click on it.
Next tried running uspl_116_jockyw.bat file
..cannot connect to phone and hence copy of haret.exe did not occur and neither did pmemtest run successfully...
What am I doing wrong??
ok..
first steps again..
battery out, back in.
connect USB
CAMERA button + Turn on.
now.. does windows do that USB sound? you know.. "tu du" ?
No sound....using win 2k Nt server edition...
but has detected my phone once on that USB and then allows me to talk to the phone using mtty....as in commands like ResetDevice work on the phone using mtty..
also, cannot get into bootlaoder mode with USB plugged in...
Steps and their results:
Disabled USB connections in activesync
Booted to the bootloader (red and green and Blue screen)
Connected the USB
"USB" displays on the left hand side corner
Now tried unlocking using Apllication unlock...grayed out button...
Tried running USPL bat but stops and says phone not connected when copying haret.exe
Using windows NT server 2003
if the SDA Application unlock button is grayed, of course the USPL won't work.
why "Disabled USB connections in activesync"?
And.. I doubt this is the problem but you should check on an winXP pc, I did it on XP.
No Luck!
Tried the same with USB enabled...same result
basically the thing we need to figure out is why your computer doesn't recognize the device.
the rest is obvious.
when I go to bootloader on my device windows pops up with a message says windows found device "and it's ready to use". like when you cannot every other USB item.
have you tried doing that on an XP system?
Going to do that now....lets hope it works....
Does ur activesync turn green when u connect at bootloader?
Also, I have removed my sim and memory card...thats okay right?
yeah, I removed both of them.
and no, activesync didn't turn green, but Windows recognized the device when I turned it on. turn on the speakers and wait for that winxp "USB connected" sound.
Still No Luck!
Tried doing the same on win xp...
no luck...
it connects to win xp ans says new device found...and ur USB device is now
ready to use...
after that i try application unlock it still gives me grayed out button....
ne suggestions???
Finally....
Finally got it done...
Thanks for all the help....
I managed to cold boot into the system for one time ans then SDA unlocked it and then ran UPSL .... it ran and then balnked out...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
then i flashed it with the ARA rom...
Seems to be working okay now..will test for a day and see...
thanks a lot
prateek
prateekswarup said:
Finally got it done...
then i disconnected the usb before the ROM update utility and unchecked the USB option in active sync...
prateek
Click to expand...
Click to collapse
I'm not sure this step was necessary but as long as it worked.. good times.
btw, how did you boot into the system?
kept trying hard reset and repeated booting...( it was booting 1 in 15 times type...)..and one lucky time it didnt hang..so used that window to slip in the SDA unlock and USPL..
thanks ...
you're welcome.
Hello, mates!
Today I've made hard reset. After that my phone stopped recognizing any sim-cards. It writes that sim card isn't inserted. I've tried 3 sim cards without any success. All of this sim-cards work just fine in another phone.
I've already tried to do one more hard reset. And I've already tried to take sim card from the phone and boot it without card. It wasn't helpful.
Have you got any ideas?
Sim module is connected to the maniboard with the help of flex cable.It may be partiarlly dissconected.
I've already checked it twice... It's conected, I'm sure.
p.s.: flashlight is working great.
Have you tried to reflash rom?
No, I haven't. I tried to download 7.0.7389 ROM that you've uploaded, but I still can't download it.
Can you give me some advice where can I get 7008 or earlier build, or re-upload 7389 to another file srver?
I found many ROMs for other HTC devices, but not for "7 PRO".
http://rapidshare.com/files/4546556....64.09.20_22.42.50.15_Signed_GOLD_RELEASE.exe
Ok, downloading it. But do you have any links to 7008 or earlier builds? I don't want to lose jailbreak...
Unfortunately,for HTC 7 PRO there are no older build available.
oops... RUU updater says that it can't connect to device, code 260.
And I unable to unlock it through Chevron WP7. It says that my device probably PIN-locked or Zune is switched off. Both are turned on.
I tried to do soft & hard reset my phone. And I tried to reboot PC. Hopefully that problem due to using Windows 7 through Virtual machine. I use Mac OS...
Tomorrow I will be able to test it at work, on a real PC with Win 7. I hope it would be a solution.
You can switch HTC 7 PRO to bootloader manualy,connect to PC, then run the exe ROM
Ok, I'm in SPL now, but when I mount it to PC there is no driver and there is sign at the white strip "Serial". I suppose that it should be changed to "USB" when I connect device to PC. But it is doesn't occur.
Got it. Trying to update.
Strange behaviour. I updated the device to 7389. I unable to update it through Zune to 7390 - no update available.
Upd: connected device to Win 7 notebook, installed Zune, and here was an update to 7390.
But the most terrible thing that my sim-card still can't be recognized...
i have done a lot of searching and cant fing the answer, i just got a replacement 1.3 rev focus from at&t. reflashed 7004, dev unlocked, updated to mango and interop unlocked, deployed a few apps, samsung tools, root tools, ect. plugged in my old phone to get navigon data off. worked fine using WP power tools. opened my new phone in wp power tools and deployed navigon 4.0 successfully. now every time i try to connect to the new phone i get error message: Connection Error! unlock your phone and make sure it is paired with zune. i also get the same error message with wp7 sdk app deployer.. tried multiple pc/phone restarts checked my hosts file.. blah blah blah. any help would be greatly apreciated i dont want to have to factory reset and then have to reflash to 7004 to re-devunlock. i already put all 8 gigs of official apps back on... ugh i want my side loaders back!
Hi. I was wondering, is there any way I could get custom accent colors for tiles on my HTC 1st. generation device? It is interop unlocked, couldn't get it fully unlocked :/ I tried deploying some .xap files like WP7 Root tools and Advanced config, but I get this error when deploying a .xap, Error - 0x81030120. Current accent colors are a little bit boring, so... I am new when it comes to this :/ Thanks.
You dont want to flash custom rom?
Loco5150 said:
You dont want to flash custom rom?
Click to expand...
Click to collapse
I do want, but whenever I try to, I get to some step and it says that my phone isn't connected to computer when it clearly is. Can you give me a link to mango ROM's [fully unlocked, right?] for HTC 7 Trophy? I can't do HSPL/RSPL for the reason mentioned above.
You should be able to flash HSPL and then custom rom to your 1st gen HTC device. If you follow all steps correctly it should not be a problem. You entered manually to bootloader and you have installed WMDC to your PC (Windows Mobile Device Center)?
I suggest you go back to http://forum.xda-developers.com/forumdisplay.php?f=812 the Trophy section, find out where you made a mistake and try to get HSPL installed. When that is done you can flash fully unlocked custom rom.
Loco5150 said:
You should be able to flash HSPL and then custom rom to your 1st gen HTC device. If you follow all steps correctly it should not be a problem. You entered manually to bootloader and you have installed WMDC to your PC (Windows Mobile Device Center)?
I suggest you go back to http://forum.xda-developers.com/forumdisplay.php?f=812 the Trophy section, find out where you made a mistake and try to get HSPL installed. When that is done you can flash fully unlocked custom rom.
Click to expand...
Click to collapse
for some reason, it's not working, I follow all these steps and I get an error when i try to HSPL in bootloader, but I get no "USB" word at the white area below on screen :/ And, I get this message in HSPL tool: I tried to reboot it, and yes, I have WMDC installed. But even on WMDC it states that my phone is not connected I can easily connect my phone to computer, but only when it's not in bootloader, and everything works, zune, app deployment..
[Error Description]:
Please make sure that your device connected to computer.
also make sure that right drivers are installed (they comes with WMDC / AS usually)
Try to connect device to different USB port and also you can try to reboot PC.
[Info]: USBWorkRSPL.cpp (184)
I even tried RSPL, but no results that device is connected to computer
For me this seems like a problem on your PC side. Im not a guru or anything, but what I would try to do is:
1. Uninstall WMDC and Zune
2. Run CCleaner or similar cleanup utility to remove crap thats left behind.
3. Download new packages to re-install WMDC and Zune.
4. Use another USB port and remove all other USB devices (I remember sometimes even usb mouse on a laptop has caused irratic behaviour)
5. Use different USB-cable
6. If you have messed around with your USB-port settings at somepoint (maybe when doing something else) these would need to be restored to default.
7. Try to get connection again.
If these steps would not work, I would try to flash using another computer, friends, mothers, etc... I would questimate that the problem has to be on your PC side as you cant establish connection. This would be naturally confirmed by testing to flash on other system.
Edit: Also, could your firewall be blocking the connection?
I rooted my device (ATT HTC One XL), but now I can't seem to be able to find it in my device manager. When I plugged it in to root it using this method, it appeared just fine. However, now that it's rooted (used root checker to make sure), it isn't appearing on my computer. USB debugging is on, and I've tried multiple USB ports and PC connection types (currently using charge-only). What am I doing wrong? I also can't seem to be able to find USB connection mode options in the notification pull-down. The phone is, however, charging, and the LED light is green.
I am also trying to unlock bootloader using these instructions, but I can't find the "Unlock-Bootloader.bat" file mentioned. I'm assuming they meant the "Spoof-CID.bat" file, which I ran, but it gets stuck at "Restarting ADB."
Thanks in advance.
EDIT: Forgot to mention, I'm running 4.0.3 and 1.85. Irrelevant, but will upgrading to 4.1 or 4.0.4 conflict with root/bootloader, and how would I achieve this upgrade?
Do not upgrade to 4.0.4 before unlocking and getting g superCID. You probably need an updated driver just download it from htcdev and retry
GroovyGeek said:
Do not upgrade to 4.0.4 before unlocking and getting g superCID. You probably need an updated driver just download it from htcdev and retry
Click to expand...
Click to collapse
I can't seem to find the appropriate drivers on htcdev.com. I also tried to download the drivers here*, however since device manager doesn't recognize my phone, I can't install the drivers manually.
*since I'm too green to post links, here:
http : // onexroot . com /one-x-root/root-any-htc-one-x-windowsmaclinuxattinternationalone-click-method/
Bumping the thread, I want to be able to figure out the solution to be able to interact between my phone and PC, such as copying files over and the like.