Found a Solution for Wifi Connectivity Issue - Samsung Galaxy Fit GT 5670

Yesterday i had a problem with connecting to the internet via my wifi...the phone should full signal but could connect 2 the interenet fr sme strange reason...
Tried many things from rebooting,deleting browser cache to even reinstalling wifi driver bt all failed
But aftr googling arnd i found the prob ws with da dns cache & the solution dat worked fr me is as follows:
1)Delete ur browser data & cache
2)Switch off your off
3)remove the battery & keep it aside fr 1-2mins
4)Put in the battery & switch on the phne...ur wifi shld be workin nw
If it still doesnt work...tryin doin a factory reset

Related

i9003 wifi problem

I have a big problem with wifi connection... it's very slow to connect and often don't work...
there is a solution... some system file that i can replace (copyng fron i9000).
My firmware is KB1.
Absolutely no problem with Wifi. whether on DDKB2 or XXKB3. May be check your wifi encryption mode.
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
scheccia said:
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
Click to expand...
Click to collapse
In XXKB3 a lot of bugs was solved. I think you should try it.
Sent from my GT-I9003
im having wifi issues too!
im using kb2 and i always disconnects in our wifi...
other deices like our laptop doesn't disconnects, only my galaxy sl.
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Nightwish sgsl said:
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Click to expand...
Click to collapse
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
thanks very much...
Wifi driver problem
I have DDkb2 firmware, whenever i try wifi on i get wifi related in logcat after 5 seconds as per default wifi supplicant scan interval time , i try to change this interval time by modifying build prop file , but it can not change, wifi running good but write error -- wpa_driver_tista_rssidata error.
I have flashed my phone to XXKB 3 but noting happens.....
my phone can't detect any wifi connections, while other nokia phones can
DDKF1 WiFi Issue
Guys, I updated to DDKF1 (recently released for India). And the WiFi just not working! Same configuration/credentials had worked on earlier version
Anyone who have had same problem; please help!
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Flash to a more stable firmware like kb3 or kph.
Sent from my GT-I9003 using XDA App
trip007in said:
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
Click to expand...
Click to collapse
Trip, do not use WEP encryption in this day and age, one can crack it with widely available tools in mere seconds. I'm using WPA2-PSK with AES encryption (D-Link DIR-655) on my phone (XXKPH firmware) just fine. If there's a problem it might be one or combinations of the following:
. Firmware issue
. Incompatibilities between wireless access point and your phone
19crytek88 said:
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Click to expand...
Click to collapse
What firmware did you flash? I have some problems with the Gingerbread versions of Android. If you flashed XXKPH or JPKP5 try to connect to your router and ping your router ip and some external ip (like google DNS 8.8.8.8). If your router pings well and you have about 70÷80% lost packets while pinging external IP. you have the same problem as mine. To solve it you can:
1. flash Froyo
2. change your WiFi router (I've tested 3 routers and I have problems only with 1)
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
ybyb said:
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
Click to expand...
Click to collapse
Don't update id you want to sure it to three service center. Also, try nagging the phone forget the wi fi connection and set the password again. This worked for me!
Sent from my GT-I9100 using xda premium app

Unable to use WIFI in Fitdroid v3.0

Hi i am unable to use wifi in fitdroid v3.0 any help...
yeah everyones having that problem right now. check the last few pages in the fitdroid v3 thread....its all given there
first what u do is use static ip in advance(see values from ur modem or just type any values).then reboot.ur wifi should be turning on by now.uncheck static ip.and try connecting to your wifi and reboot while u r trying to connect to wifi.now you will be able to connect to wifi.

Problem with sharing internet over WiFi ?!

Hi all
I have problem with sharing internet over WiFi. A have new ROM KPU. When i have old rom KPQ everything work fine . The problem looks like, when i switch ON sharing internet on i9003 , laptop find the network and connects. But without internet. On i9003 display i see dead icon internet activity.
Where is problem ? Can i back to lower ROM ?
Thx for advice
Sorry for my english :-/
Are all the phone internet based apps working? And YES U CAN USE ANOTHER FW! KPQ for instance without any issues, just flash from pit, or use the four files of the same posted recently! gud luck mate! :thumbup:
☞★sent from drajax's Galaxy SL!!! *♂ツ
Yes all apps based on internet on phone work fine but the Hotspot doas not work very well :-/. Ok i turn back to lover rom.
How to back to rom with working hotspot for me?
Download firmware from samsung firmware and use only Odin to flash?
In zip/rar file i find only 1 file.
Which it's means "pit"?
Where i find another 4 files this ROM about what you write ?
Thx for advice
ymmi21 said:
Hi all
I have problem with sharing internet over WiFi. A have new ROM KPU. When i have old rom KPQ everything work fine . The problem looks like, when i switch ON sharing internet on i9003 , laptop find the network and connects. But without internet. On i9003 display i see dead icon internet activity.
Where is problem ? Can i back to lower ROM ?
Thx for advice
Sorry for my english :-/
Click to expand...
Click to collapse
are you trying with some app or with the native mobile ap?
If you want to tether your Phone's Data Connection via USB or WiFi, Here are the steps:
1. Go into settings
2. Wireless and network
3. Tethering
Via USB
4. Click on USB Tethering
Via WiFi
4. Click on Mobile AP
5. Go into Mobile AP Settings
6. Click on Configure Mobile AP
7. Give a name to your WiFi Hotspot you just created
8. Create a password or make a open Hotspot ( Whatever you like )
Your HotSpot is created using your Mobile Data Connection
Now Go into your wifi settings in your PC and connect with the Wifi you just created !

[Q] wpa_applicant.conf - Wireless troubles !

Hello,
Unfortunately I installed the "ZT 180 Adhoc Switcher" application to connect my phone to an Ad Hoc network ..
Since, you can not activate my wifi ...
The application has created a backup file that I restored using a shell .. But the wifi still does not work, he does not want to activate.
Could someone give me his file :
/ data / misc wifi / wpa_supplicant.conf ?
Maybe after this it can work again ?
Please: (
Thank you very much!
FIXED !
Hello,
Excuse me, finally after a reboot everything is back to normal
Thanks again !

[Q] Xender Isn`t Working

My pc is unable to open the link given by Xender ..
tried reinstalling app bt tht wont wrk .. Any solution .. plzz

Categories

Resources