Database Info

[HELP] problems with cwm and roms

Hi!I just can figure whats wrong with the phone.I am very sorry to have to post this but this is what i have done until now:
-it was original t-mobile sgs4g soft 2.3.6
1. i downgraded to froyo
2. tried to apply the froyo cwm recovery
3. didnt worked (dunno why)
4. installed another version with odin http://forum.xda-developers.com/showthread.php?t=1193751 the cwm worked but it kept having cant mount sd card
5. installed the new cwm with kernel ..didnt worked same thing
6.installled again the froyo with odin
7. finnaly worked installed the octane
8. octane froze at sgs4g screen ,not boot animation , kept reseting
9. 3 flashes and froyo and bla bla after i installed the black valhalla
10. valhalla works but i cant recieve calls sms or mms...
11. Need help!

Don't flash GB stuff on froyo boot loaders. Don't flash froyo stuff on GB boot loaders. If don't know how to repartition with a pit don't flash boot loaders as boot loader flashes may hard brick your device. If your unsure about what your flashing matching your boot loaders don't flash it. Finally all your mixing and matching incorrectly probably got you some weird gremlins so learn how to"one click" back to stock (I wrote a noob guide in general section) and start over. This will ensure GB boot loaders are flashed correctly good luck
Sent from my SGH-T959V using XDA App

I agree one click is probably your best bet. I do however wonder if you somehow managed to wipe your imei? Check to make sure.

ok so i downloaded the T959V-UVKJ6-One-Click tommorow i will do it bcoz its not my phone...question how do i install custom recovery to install the Octane-V3.0 XPLOD NO CIQ EDITION
and will i get rid of the call and sms not being recieved?

hechoen said:
I agree one click is probably your best bet. I do however wonder if you somehow managed to wipe your imei? Check to make sure.
Click to expand...
Click to collapse
Did you check this? Don't post it just make sure it is not a string of 0s. It is very important...
charris said:
ok so i downloaded the T959V-UVKJ6-One-Click tommorow i will do it bcoz its not my phone...question how do i install custom recovery to install the Octane-V3.0 XPLOD NO CIQ EDITION
Click to expand...
Click to collapse
If you get the "kj6 beta 2d" package it includes a custom kernel with cwm recovery
Sent from my SGH-T959V using XDA App

sorry forgot to mention this i can make calls or send txt and i remember it having an imei as i scrolled down in about phone> status

I was having some problems with little things in octane also, but what fixed mine was wiping the cache, dalvik cache, flashing, ( mounts UMMU), reboot, check functionality, reboot into cwm, fix permissions, reboot, enjoy.
Sent from my Octane powered, Thunderbolt tweaked SGH-T959V using xda premium

ty problem solved u can close it or erase it ty very much

New ROM

Whenever i try to flash a new ROM it doesn't want to load. I've tried the CM7 nightlies and the pheonix ROM. This is what I do.
I root my phone via one click root.
Install clockwork recovery via app.
wipe
install ROM via recovery (install zip)
start up
Locks at LG screen. Ugh!
Any advice?

Turague said:
Whenever i try to flash a new ROM it doesn't want to load. I've tried the CM7 nightlies and the pheonix ROM. This is what I do.
I root my phone via one click root.
Install clockwork recovery via app.
wipe
install ROM via recovery (install zip)
start up
Locks at LG screen. Ugh!
Any advice?
Click to expand...
Click to collapse
What OS are you coming from?

Wipe cache
Wipe dalvik cache
Wipe data
Wipe system
Flash.
NVIDIA NEVER AGAIN!

Turague said:
Install clockwork recovery via app.
Click to expand...
Click to collapse
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
Why? What happens if you did from the ROM Manager? Sorry im a noob to this device
Sent from my LG-P999 using XDA App

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
This is a must for the g2x. If you use from manager it only fake flashes clockwork mod recovery and makes you unable to flash roms.
Typical way to achieve root on the g2x is to.
1. Nvflash cwm
2. Create a nandroid backup.
3. Flash a rom that has root.
Don't bother with rom manager or super one click.
Sent from my Galaxy Nexus using xda premium

Just as a quick question. Does wiping the system, wipe ANY of my data? Like does it only wipe the existing ROM? Ive been confused of it since the first time i flashed a ROM
Sent from my G2X

Волк said:
NO, NO, NO! It's one thing to do this, alot have, it's another to not read threads or research it.
NEVER flash CWM from an app, you HAVE TO flash via NVflash.
http://forum.xda-developers.com/showthread.php?t=1054492
Click to expand...
Click to collapse
Thanks, I'll give it a shot and get back to you. I don't think it had to do with the wipe as I always ran a wipe script before installing. I thought it had to do with the kernel.... (don't have a clue though)
I'll flash the clockwork via nvflash, and get back to you, thanks.
EDIT:
IT WORKS. NVFlash the recovery, make sure to change the command if you have a different version you plan to flash/

I used rom manager and all, my roms have worked fine... :S
Sent from my LG-P999 using XDA App

theNOOBuser said:
I used rom manager and all, my roms have worked fine... :S
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
You sir are a very lucky man.

Lol. I'm guessing it was a noob-move getting clockwork through ROM Manager. Ill probably use nvflash when I get home just to be safe hahaha
Sent from my LG-P999 using XDA App

theNOOBuser said:
Lol. I'm guessing it was a noob-move getting clockwork through ROM Manager. Ill probably use nvflash when I get home just to be safe hahaha
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
you definitely want to do that. do you have a nandoid backup of your original system? if your phone breaks, that is the only way to revert it back to original for an exchange (unless ofcourse you take a hammer to it).

Yeah. I have a Stock froyo backup.
Sent from my LG-P999 using XDA App

jblah said:
you definitely want to do that. do you have a nandoid backup of your original system? if your phone breaks, that is the only way to revert it back to original for an exchange (unless ofcourse you take a hammer to it).
Click to expand...
Click to collapse
i first flased cwm using nvflas... but then i updated it thru rom manager ... is it ok?

rohitmohanihm said:
i first flased cwm using nvflas... but then i updated it thru rom manager ... is it ok?
Click to expand...
Click to collapse
I think so. Catch is that I don't know if doing that will actually update anything, the whole problem is that ROM manager doesn't flash it properly/to the right place. The only thing to do is make a nandroid and try it out and if ti doesn't work, then reflash with NV flash and you're good.

Волк said:
I think so. Catch is that I don't know if doing that will actually update anything, the whole problem is that ROM manager doesn't flash it properly/to the right place. The only thing to do is make a nandroid and try it out and if ti doesn't work, then reflash with NV flash and you're good.
Click to expand...
Click to collapse
I flashed a few other ROMs after i updated CWM thru ROM manager.. and all of them flashed with out any problems.. the only Issue i had was when i tried flashing Morfic's Trinity kernal .. my phone would get stuck at the boot animation.. i wiped every thing and reflashed CyanogenMod and my phone is working agin [I wiped cache and Dalviks before i flashed the kernal.. i guess my phone cant handle it] http://media.xda-developers.com/images/smilies/mad.gif .. Thanks Bro

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] rom

i got my sgs2 and i wanna install cyanogen mod 7 so i got everything to do it but i just wanna know that if i do it wud it wipe out everything in my phone... caz i wanna keep everything on

blackbullet9 said:
i got my sgs2 and i wanna install cyanogen mod 7 so i got everything to do it but i just wanna know that if i do it wud it wipe out everything in my phone... caz i wanna keep everything on
Click to expand...
Click to collapse
Well when you do a factory reset and anything else you'll lose all of your information but it can be very easy to recover. If you added a Google account to your phone then your contacts will be backed up and your apps redownloaded and anything on your SD card will stay there. All of the stuff from the Google account will come back after you have added the SAME Google account to the phone during setup which is done when you flash a new rom.
Sent from my Sensation using XDA

cyanogenmod
thnx for d reply but i got one more question i my sgs2 is on gingerbread 2.3.4 and i wanna get cyanogenmod on but everytime i try it says failed with some other stuff.. first i got rom manager premium then clicked the clockword mode recovery thing then i downloaded this rom from some website then i clicked install rom from sd card then it went to some boot screen theni found it and i clicked but it never works plz tell me a way how to.....
thnx

blackbullet9 said:
thnx for d reply but i got one more question i my sgs2 is on gingerbread 2.3.4 and i wanna get cyanogenmod on but everytime i try it says failed with some other stuff.. first i got rom manager premium then clicked the clockword mode recovery thing then i downloaded this rom from some website then i clicked install rom from sd card then it went to some boot screen theni found it and i clicked but it never works plz tell me a way how to.....
thnx
Click to expand...
Click to collapse
Well I'm not too sure, especially with your phone but this is what should happen, reboot into recovery, do some wipes then flash the roms and reboot, if it comes up with a problem DURING the flashing then redownload the rom. If the case is that your phone doesn't boot fully then the problem is that you are using the wrong firmware because you are using a Rom with a different android version. If this didn't solve it then try asking in the sgs2 forums because I don't know too much about your phone
Sent from my HTC Sensation Z710e using XDA

thnx but i dont know much about flashin an stuff i just want cyanogenmod for my sgs2 plz gimmie some steps....
thnx

blackbullet9 said:
thnx but i dont know much about flashin an stuff i just want cyanogenmod for my sgs2 plz gimmie some steps....
thnx
Click to expand...
Click to collapse
Well ill give you all of my thougts. Redownload the Tom and do a wipe then install it, if it doesn't work ty a different version if cyanogenmod
Sent from my Sensation using XDA

First, boot into recovery. Not sure how it works on the sgs2 because I'm running an Incredible 2, but it should be by holding the power and volume buttons if you can't get there from ROM manager.
Second, wipe data/factory reset.
Third, wipe cache partition.
Fourth, advanced/wipe dalvik cache.
Fifth, mounts and storage/format system.
Sixth, install zip from sd card.
Seventh, install gapps if it isn't in the ROM.
Eighth, reboot.
Here is the link to your phone on Cyagenmod's website: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide

[Q] I am stuck in a CWM boot loop.

Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.

Try odin?

I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.

Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5

I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..

ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.

... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...

chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...