ALL CREDIT GOES TO Master&Slave™ ON THE SAMSUNG VIBRANT BOARD!!
SOME OF THE TWEAKS HAVE ARE ALREADY THERE IN SOME CUSTOM ROMS BY OUR DEVS
READ FIRST
**If these lines already exist in your build.prop, then you can just edit the values. If not then Just add the lines. After making the tweaks always remember to reboot twice..!!!**
----------------------------------------------------------------------------
Normal Method Done Via Root Explorer
1, Open "Root Explorer" and mount R/W.
2, Go to "system" and you will find there is a file name "build.prop".
3, Right click (By holding at the file) and there is menu pop out.
4, Scroll down and select edit in Text Editor.
5, Type in those few line of words below into the last line of the text then save.
6. Reboot twice !!
NOTEPAD++ RECOMMENDED FOR EDITING BUILD.PROP
Data Tweaks
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=9
Powersave Tweaks
ro.ril.disable.power.collapse=1
pm.sleep_mode=1--------NEW
wifi.supplicant_scan_interval=150
UI Tweaks
windowsmgr.max_events_per_sec=150
debug.sf.hw=1
video.accelerate.hw=1------NEW
Media Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000-----NEW
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
Boot Tweaks
Disable boot animation for faster boot
debug.sf.nobootanimation=1
persist.sys.shutdown.mode=hibernate----NEW
^^Makes phone boot rapidly fast.
Miscellaneous Tweaks
Change the Dalvik VM heap size
dalvik.vm.heapsize=72m
To enable the hard key lights to stay on while the screen is on and not timeout
ro.mot.buttonlight.timeout=0
Try disabling BLN if your having trouble getting this to work
To make the phone come off of the "black screen" in the middle of, or the end of phone calls when you pull the phone away from your face
mot.proximity.delay=150
**May kill the dialer**
To disable usb debugging popup
persist.adb.notify=0
To give your phone an HD effect fitting a little more on the screen, look for this in you current build.prop and change the 110 OR 100 to:
ro.sf.lcd_density=X (100 or 110)
I RECOMMEND 110
To enable the menu button too unlock the phone
ro.config.hw_menu_unlockscreen=true
To stop the phone from waking up when pressing the volume key
ro.config.hwfeature_wakeupkey=0
To make the phone ring faster when dialing out
ro.telephony.call_ring.delay=800
Force launcher into memory
ro.HOME_APP_ADJ=1
Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
Fix some application issues
ro.kernel.android.checkjni=0
Enjoy PEOPLE!!!
Does fit support the bln setting
galfit cm7.2 rc3
kudo shinichi said:
Does fit support the bln setting
galfit cm7.2 rc3
Click to expand...
Click to collapse
nope its for devices which support bln
COOL !!
nice guide bro thanks!
btw can u provide an example for this?
im afraid to add this tweaks and fail (not working) hehe
Syfer_Fever said:
nice guide bro thanks!
btw can u provide an example for this?
im afraid to add this tweaks and fail (not working) hehe
Click to expand...
Click to collapse
HERE YOU GO BRO
i have shown adding the disabling boot animation tweak on creed 1.5's build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id= GINGERBREAD
ro.build.display.id=CREED's ROM v1.5
ro.build.version.incremental=DDKQ5
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=Thu Sep 8 09:11:37 KST 2011
ro.build.date.utc=1315440697
ro.build.type=user
ro.build.user=root
ro.build.host=DELL123
ro.build.tags=release-keys
ro.product.brand=samsung
ro.product.model=GT-S5670
ro.product.name=GT-S5670
ro.product.device=GT-S5670
ro.product.board=GT-S5670
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-S5670
ro.product.cpu.abi=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-S5670-user 2.3.4 GINGERBREAD DDKQ5 release-keys
ro.build.fingerprint=samsung/GT-S5670/GT-S5670:2.3.4/GINGERBREAD/DDKQ5:user/release-keys
# Samsung Specific Properties
ro.build.PDA=S5670DDKQ5
ro.build.hidden_ver=S5670DDKQ5
ro.build.changelist=561540
ro.build.buildtag=
ro.HOME_APP_ADJ=1
ro.media.enc.jpeg.quality=100
ro.telephony.call_ring.delay=800
windowsmgr.max_events_per_sec=150
debug.performance.tuning=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
video.accelerate.hw=1
# end build properties
#
# system.prop for GT-S5670
#
##rild.libpath=/system/lib/libril-qc-1.so
##rild.libargs=-d /dev/smd0
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
#debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=110
media.stagefright.enable-player=false
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
#MM Camera
ro.media.enc.vid.m4v.fps=5,15
ro.media.enc.vid.m4v.width=176,320
ro.media.enc.vid.m4v.height=144,240
ro.media.enc.vid.m4v.bps=90000,770000
ro.media.enc.vid.h264.fps=5,15
ro.media.enc.vid.h264.width=176,320
ro.media.enc.vid.h264.height=144,240
ro.media.enc.vid.h264.bps=90000,770000
ro.media.enc.vid.h263.fps=5,15
ro.media.enc.vid.h263.width=176,320
ro.media.enc.vid.h263.height=144,240
ro.media.enc.vid.h263.bps=90000,770000
ro.media.enc.vid.height.min = 144
ro.media.enc.vid.height.max = 240
ro.media.enc.vid.width.min = 176
ro.media.enc.vid.width.max = 320
ro.media.enc.vid.bps.min =90000
ro.media.enc.vid.bps.max =770000
ro.media.enc.vid.fps.min = 5
ro.media.enc.vid.fps.max = 15
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r6
ro.config.notification_sound=12_Sherbet_Default_message.ogg
ro.config.alarm_alert=1_Good_Morning.ogg
dev.sfbootcomplete=0
keyguard.no_require_sim=true
ro.config.ringtone=Classic_bell.ogg
ro.config.notification_sound=01_Cloud.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.execution-mode=int:jit
debug.sf.nobootanimation=1
persist.sys.shutdown.mode=hibernate
Click to expand...
Click to collapse
here i just added the red part its simple dnt forget to leave on line after a tweak
thanks! i will test it
Its good to give proper credits to persion from where you get it
This is quite interesting. Thanks
Sent from my GT-S5670 using xda premium
is there any tweak to make reboot faster, but not to disable the boot animation?
AldoSebastian said:
is there any tweak to make reboot faster, but not to disable the boot animation?
Click to expand...
Click to collapse
U SHOULD USE DIS DEN
varun.katoch said:
.
.
.
To enable the hard key lights to stay on while the screen is on and not timeout
ro.mot.buttonlight.timeout=0
Try disabling BLN if your having trouble getting this to work
.
.
.
Click to expand...
Click to collapse
do we have such lights on GalFit?
varun.katoch said:
.
.
.
Net speed tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
.
.
.
Click to expand...
Click to collapse
Caused cm7.2rc2 to disfunction wifi AND data :S
AldoSebastian said:
is there any tweak to make reboot faster, but not to disable the boot animation?
Click to expand...
Click to collapse
I think u can add a cf-root kernel.
It can make boot go faster. I think
Delanoister said:
I think u can add a cf-root kernel.
It can make boot go faster. I think
Click to expand...
Click to collapse
i think there is no CF-Root kernel for fit now
maybe you can make it for fit?
It would be great if you commented about each setting's purpose (would really help newbie developers)
and btw tweek is incorrect. it's tweak
Are you giving two line spaces for text to type.
premolikeshtc said:
Are you giving two line spaces for text to type.
Click to expand...
Click to collapse
leave only one line bro
I am still not getting how to type..!
like if i wanna insert net speed tweaks...i simply write all those lines, leaving one line after the last line .! Is this is the way!
Yup dats d way !!
Sent from my GT-S5670 using XDA App
Related
I9001 VALUE PACK
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQB
ro.build.version.incremental=XXKQB
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Mar 20 11:04:55 KST 2012
ro.build.date.utc=1332209095
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL176
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQB release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQB:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQB
ro.build.hidden_ver=I9001XXKQB
ro.build.changelist=1044586
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
CHANGES
>Can take pictures while video recording
>Touchwiz V4.0 (but the same old icons)
>Photoeditor
>Option to change font size under "Accessibility"
>Face recognition
>Camera (seems to focus faster)
>GPU drivers
>Autorotation is faster
I checked the gpu drives there's one file repacked
but it doesn't change the score
It seems they have made a slight change in the gpu drivers.
Please test some HD games and give feed back. (A slight tweak could have done the trick)
Compared the build.prop whith the KQ7 one
No major changes.
BUGS
1)The dock reset's to it's original layout after clearing the RAM or rebooting (thank's to XenoBE)
2)App icons are misplaced after a reboot.
You can Avoid these bugs by deodexing the rom and then doing a factory reset by dialing *2767*3855#
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
http://samsung-updates.com/get/762/Samsung_Firmware_GT-I9001_AUT_I9001XXKQB_Android_2_3_6.html
Thank's to crybert, Here is a deodexed Version of the KQB Firmware.
The zip Package is flashable via CWM/FeaMod an StockRecovery.
https://sourceforge.net/projects/cry...ional Stuff/
Zippyshare link http://www8.zippyshare.com/v/49143861/file.html
It only contains the app/framework folder. So you have to Flash KQB via Odin first.
nail16 said:
I9001
PHP:
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
Click to expand...
Click to collapse
nail have u flashed it already? so ? is it the cheap update that's supposed to replace ics ??
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
nail16 said:
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
Click to expand...
Click to collapse
let's hope so, and hopefully better RAM mangement
Is there any problems with WiFi?
Sent from my GT-I9001 using xda premium
Waiting for some screenshots.
Finally..... Please post some screenshot, antutu benchmark, wi-fi experience, GPU, battery usage and etc
He already posted some screenshots. Look in the first comment.
**** this, It has the same old gpu drivers
i'll post the antutu scores
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Gusta_HR said:
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Click to expand...
Click to collapse
The lockscreen is not laggy, its very smooth. And it looks like the Galaxy Note lockscreen. The phone is not laggy at all.
It's XXKQ7 with the new added crapwiz v4.0 and the premium **** (photo editor,face lock)
Browser is the same still can see the Checkered boxes while scrolling large pages
hmm... 19 min of odin flash still on system.img.ext4 download , i'm starting to get worried
Edit: finally ,after 21 min odin decided to finish
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
is this the official value pack?
Fukin bastards didn't bother to update the apps
samsung = Bunch of assholes
Gusta_HR said:
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
Click to expand...
Click to collapse
trust me it is quick, the old touchwiz is slow, this one kills it, scrolling in app drawer has never been this quick on a stock touchwiz
210mb average RAM used without anything installed, too much in my opinion,i think 180mb (as on SGS) would've looked nice.
the auto rotation is also tweaked, try watching a youtube video and rotating to landscape, it takes less than a sec
also as mentioned before, lockscreen is not laggy (for now).
Edit: Gallery loads very guickly. camera app has the snapshot icon durin video recording. autofocus still not present (at least according to my eye) .
XenoBE said:
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
Click to expand...
Click to collapse
I encountered the same bug. One workaround is add a shortcut to the screen and then delete it. Worked for me now 3 times...
Is this Value Pack is Official Release or Custom Made ?
and it is KQ7
and on Samfirmware there Switzerland Rom which is KQB 2012 April Release
Which one Should we install and
is wifi problem solved in this pack ?
build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.UCLF6
ro.build.version.incremental=UCLF6
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Sat Jun 23 20:19:08 KST 2012
ro.build.date.utc=1340450348
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-79
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I727
ro.product.brand=samsung
ro.product.name=SGH-I727
ro.product.device=SGH-I727
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-I727
ro.tether.denied=false
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-I727-user 4.0.4 IMM76D UCLF6 release-keys
ro.build.fingerprint=samsung/SGH-I727/SGH-I727:4.0.4/IMM76D/UCLF6:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I727UCLF6
ro.build.hidden_ver=I727UCLF6
ro.build.changelist=735228
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
dalvik.vm.heapsize=64m
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
persist.sys.hdmi.on=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=17
# system prop for issue regarding writable directories(SDT)
#
ro.kernel.qemu=0
#
#
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
#camera changes..r.mewar
persist.sys.camera.transform=0
persist.sys.camera.connect=0
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System property for cabl
ro.qualcomm.cabl=0
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
# system prop for adb_notification
persist.adb.notify=0
# system prop for usb_notification
persist.usb_mass_storage.notify=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
# for 480x800 panel
ro.sf.lcd_density=240
#add camera sound property for KOR concept
ro.camera.sound.forced=1
# Set default ringtone for Korea concept
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=over_the_horizon_preview.ogg
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System prop for qmi adb log
persist.radio.adb_log_on=1
# Multimedia prop for Smart View
media.enable-commonsource=true
# System proverty snapshot disable
persist.radio.snapshot_disabled=1
# System property for UMS
persist.ums.popup=0
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
drm.service.enable=true
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
ro.opengles.version=131072
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.secdirenc=true
ro.secsddecryption=true
ro.secfulldirenc=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Source: @SGS2Update
this is it! Checkfus is showing the new firmware! i727UCLF6!
Pulling it down via KIES now...
BaconStep said:
this is it! Checkfus is showing the new firmware! i727UCLF6!
Click to expand...
Click to collapse
Does this mean we can go back to 2.3.5 stock and update to ICS officially?
UCLF6 modems
Here's the UCLF6 modems, CWM flashable: UCLF6 modems
(Just flashed the modems, but I'm sticking with CM9 nightlies for now.)
Downloading Kies now, will test it out when I get home.
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
UCLF6 ODIN flashable
UCLF6 ODIN flashable, from sammobile (direct link): I727UCLF6_I727ATTLF6_ATT.zip
Dismal Shadow said:
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
Click to expand...
Click to collapse
Me neither, but I'll take the radio (thanks cschmitt!)..
petrochemicals said:
Does this mean we can go back to 2.3.5 stock and update to ICS officially?
Click to expand...
Click to collapse
No need for that, just grab the ODIN flashable version and flash is over whatever you're running now (nandroid first, of course!)
i notice this is for i727 so will it work on i727r?
Dismal Shadow said:
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
Click to expand...
Click to collapse
Yup but this means source drops soon! Our kernel source for our phone instead of hercules means less bugs!
Holy mother of god. I can't believe it's here! Thanks for posting this cschmitt!
Now we just need to deal with incessant "When is official Jellybean coming?" threads for the next few months.
This is the official ATT version right? I thought rogers already had ICS
nest75068 said:
This is the official ATT version right? I thought rogers already had ICS
Click to expand...
Click to collapse
Correct, Rogers ICS has been on sammobile.com for about a month now.
What a shocker, it rolls out right after the Galaxy S3's ship out... Amazing coincidence!
/conspiracytheory
skrambled said:
Correct, Rogers ICS has been on sammobile.com for about a month now.
Click to expand...
Click to collapse
the kernel and radio will be different so would this att sammobile odin tar flash on a i727r?
or is it even worth the bother? i'll assume there will be no difference between this and the rogers 4.0.4
cschmitt said:
Here's the UCLF6 modems.
(Just flashed the modems, but I'm sticking with CM9 nightlies for now.)
Click to expand...
Click to collapse
Thanks hit.
Not noticing a big difference in UL/DL speed on the UCLF6 modem. Wasn't expecting anything either. Latency seems to be a bit better overall.
taranis17 said:
Thanks hit.
Not noticing a big difference in UL/DL speed on the UCLF6 modem. Wasn't expecting anything either. Latency seems to be a bit better overall.
Click to expand...
Click to collapse
oh well ill stick with rogers 4.0.4
Popcorn,
Since your on Rogers, I would highly recommend to NOT download and install the ATT Version. You would need the SGH-I727R version. The slight differences between the 2 can become catastrophic.
New firmware available on SAMMOBILE or you can use the http://fus.nanzen.se/ webpage and utility to download:
Region Baltic
Date 2012 July
Android 2.3.6 (possibly value pack)
I9001XXKQI/I9001OXFKQ3/I9001XXKPM/I9001XXKQI
download location: http://www.hotfile.com/dl/164483305/...3_SEB.zip.html
Cant flash this till the afternoon so if anyone else tries this, please inform us about possible changes or TW fixes.
------
TW is still buggy (thanks to Texten for reporting)
Downloading , will post my review later.
morofaya said:
Downloading , will post my review later.
Click to expand...
Click to collapse
Seems changelog is the same
Pezmet said:
Seems changelog is the same
Click to expand...
Click to collapse
nope:
PDA: I9001XXKQI
CSC: I9001OXFKQ3
Version: 2.3.6
Date: 2012-07-24
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Download: http://www.hotfile.com/dl/164483305/37592e1/I9001XXKQI_I9001OXFKQ3_SEB.zip.html
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQI
ro.build.version.incremental=XXKQI
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 29 09:28:57 KST 2012
ro.build.date.utc=1340929737
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL170
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQI release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQI:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQI
ro.build.hidden_ver=I9001XXKQI
ro.build.changelist=[COLOR="Red"]1159246[/COLOR]
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r10
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
have it extracted right now. will test touchwiz launcher
Will test it and reply
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
Good work once again Samsung...
Thanks texten. I will update first post.
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
cjason said:
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
Click to expand...
Click to collapse
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
texten said:
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
Click to expand...
Click to collapse
Oh, it's a deodexed apk... This explains the difference
Thanks.
Anyway, too bad it's the same BS...
Is there any improvements?
who cares about samsung roms.. as we've got some aospish
Sent from my GT-I9001 using xda app-developers app
They must give ics not gb
Sent from my GT-I9001 using xda premium
texten said:
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
Click to expand...
Click to collapse
Lockscreen can be fixed for no wallpaer with fix permisions
Pezmet said:
Lockscreen can be fixed for no wallpaer with fix permisions
Click to expand...
Click to collapse
i mean the charging notification
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
quendil said:
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
Click to expand...
Click to collapse
Feamod recovery, yes TW no.. even with hard to kill launcher from V6 same issues accor.
If someone can post a deodexed rom it will be great.
Thank you
It has new baseband version: XXKPM
For who it is interested to flash through odin only the baseband you can download in "porting state post"
I have wiped up a batch of ICS for Galaxy Y. It isn't build from source(I abandoned that project). I'm not assuring you whether it'll boot or not. It is only for devs.
Use it at your own risk.
*My phone's IC curcuit went for a toss. So, I can't test it for the time being.*
*Don't ask unnecessary question like "How did I port it ?"
Test it and report
Tester
Install merruk pre-2.0 kernel
Format System
Mount System
Install ICS
Wipe Data
Reboot
ICS??
another ics port again?
U've try?
hears good,its portet from an original ics source?
Anyone tried this ?? Boot or not ? Waiting .. :beer:
Sent from my GT-S5360 using xda premium
(Deleted)
Any news??
Sent from my GT-S5360 using xda premium
tjsgy said:
Downloading!
Will Download later
Click to expand...
Click to collapse
Waiting for ur reply !
Sent from my GT-S5360 using xda premium
any tested news guys???
Sent from my GT-S5360 using xda premium
if you want to know you can test it by yourself (lol)
kurotsugi said:
if you want to know you can test it by yourself (lol)
Click to expand...
Click to collapse
lol....y did i couldn't have such brilliance,dat i too can test it...???
may b cos i know dat im ntt devlper,bt u dnt know.
Sent from my GT-S5360 using xda premium
Sorry!!
I said I am downloading, but internet not working properly so I wont be able to test today, will report as soon as i test
*Note* If the rom isn't booting then replace libandroid_runtime.so from file attached below. Location /system/lib
If still not working then I'll ask the Moderator to lock this thread. I'll reopen it after porting Galaxy Chat's firmware to Galaxy Y
Bootloop
Replaced the file still Bootloop
Sources ?
Gamer R said:
*Note* If the rom isn't booting then replace libandroid_runtime.so from file attached below. Location /system/lib
If still not working then I'll ask the Moderator to lock this thread. I'll reopen it after porting Galaxy Chat's firmware to Galaxy Y
Click to expand...
Click to collapse
Firmware isn't released !
Or is it ?
@OP is this really a ported version from galaxy chats ICS? If yes then lets start debugging the port.
@Testers if you are about to test it or have already done it then pls give logcats
it is GB Not ICS ! HE FOOLED US.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=GamerR
ro.build.version.incremental=eng.Maroc-OS.20120515.140328
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=June 20 14:03:55 BRT 2012
ro.build.date.utc=1337101435
ro.build.type=userdebug
ro.build.user=Maroc-OS
ro.build.host=android.merruk.ma
ro.build.tags=test-keys
ro.product.model=GT-S5360
ro.product.brand=samsung
ro.product.name=GT-S5360
ro.product.device=galaxy-y
ro.product.board=totoro
ro.product.cpu.abi=armeabi-v6l
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=TOTORO
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=GT-S5360-user 2.3.7 GRJ22 eng.Maroc-OS.20120515.140328 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.7/GINGERBREAD/GRJ22:user/release-keys
ro.cm.device=totoro
# end build properties
#
# system.prop for Galaxy Y
#
# Audio/Video/Screen/OGL related stuff
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.jpeg.quality=85,75,65
ro.media.enc.hprof.vid.bps=8000000
# BT / Wifi / Net related
net.bt.name=Android-Maroc-OS
net.dns1=8.8.4.4
net.dns2=8.8.8.8
# Network settings + 3G/EDGE Hacks
ro.ril.hep=1
ro.ril.hsxpa=1
ro.ril.enable.dtm=1
ro.ril.gprsclass=10
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.enable.3g.prefix=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995,113,115,1530,1522 \
ro.ril.emc.mode=2
ro.com.android.dataroaming=false
# Managing modem answere on switch from 2G to 3G
ro.ril.ntmodeglobal=true
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.startheapsize=32m
#dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapsize=64m
dalvik.vm.checkjni=false
# Misc
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
rild.libpath=/system/lib/libbrcm_ril.so
ro.telephony.ril_class=samsung
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# keep apps in memory
#sys.keep_app_1=com.android.inputmethod.latin
#sys.keep_app_2=
#sys.keep_app_3=
#sys.keep_app_4=
# Speed tweaks:
ro.kernel.android.checkjni=0
# to spare some RAM
persist.sys.purgeable_assets=1
# more speed
persist.sys.use_dithering=0
# This defines the max event window manager can handle in 1 s.
windowsmgr.max_events_per_sec=150
# Maximum time (in msec) we allow the CallerInfo query to run,
# before giving up and falling back to the default ringtone.
# ro.ringtone_query_wait_time=1500
# when set to 1, Google Maps NetworkLocationService
# (designed to be constantly running since gmaps 5.1.0)
# won't be kept in RAM anymore, unless Google Maps really need it
#
# set this property to 0 if you rely on Latitude service
# to automatically report your location (bye bye, free RAM)
persist.sys.gmaps_hack=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
wifi.interface=eth0
ro.telephony.ril_class=samsung
ro.telephony.sends_barcount=1
mobiledata.interfaces=pdp0,eth0,gprs,ppp0
dalvik.vm.dexopt-flags=m=y
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=64m
persist.sys.purgeable_assets=0
ro.compcache.default=0
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
dev.sfbootcomplete=0
persist.sys.vold.switchexternal=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.kernel.android.checkjni=0
dalvik.vm.checkjni=false
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.modversion=CyanogenMod-9-GT-S5360
dalvik.vm.dexopt-data-only=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android-Maroc-OS
#ro.config.play.bootsound=1
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Ashutos1997 said:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=GamerR
ro.build.version.incremental=eng.Maroc-OS.20120515.140328
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=June 20 14:03:55 BRT 2012
ro.build.date.utc=1337101435
ro.build.type=userdebug
ro.build.user=Maroc-OS
ro.build.host=android.merruk.ma
ro.build.tags=test-keys
ro.product.model=GT-S5360
ro.product.brand=samsung
ro.product.name=GT-S5360
ro.product.device=galaxy-y
ro.product.board=totoro
ro.product.cpu.abi=armeabi-v6l
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=TOTORO
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=GT-S5360-user 2.3.7 GRJ22 eng.Maroc-OS.20120515.140328 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.7/GINGERBREAD/GRJ22:user/release-keys
ro.cm.device=totoro
# end build properties
#
# system.prop for Galaxy Y
#
# Audio/Video/Screen/OGL related stuff
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.jpeg.quality=85,75,65
ro.media.enc.hprof.vid.bps=8000000
# BT / Wifi / Net related
net.bt.name=Android-Maroc-OS
net.dns1=8.8.4.4
net.dns2=8.8.8.8
# Network settings + 3G/EDGE Hacks
ro.ril.hep=1
ro.ril.hsxpa=1
ro.ril.enable.dtm=1
ro.ril.gprsclass=10
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.enable.3g.prefix=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995,113,115,1530,1522 \
ro.ril.emc.mode=2
ro.com.android.dataroaming=false
# Managing modem answere on switch from 2G to 3G
ro.ril.ntmodeglobal=true
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.startheapsize=32m
#dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapsize=64m
dalvik.vm.checkjni=false
# Misc
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
rild.libpath=/system/lib/libbrcm_ril.so
ro.telephony.ril_class=samsung
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# keep apps in memory
#sys.keep_app_1=com.android.inputmethod.latin
#sys.keep_app_2=
#sys.keep_app_3=
#sys.keep_app_4=
# Speed tweaks:
ro.kernel.android.checkjni=0
# to spare some RAM
persist.sys.purgeable_assets=1
# more speed
persist.sys.use_dithering=0
# This defines the max event window manager can handle in 1 s.
windowsmgr.max_events_per_sec=150
# Maximum time (in msec) we allow the CallerInfo query to run,
# before giving up and falling back to the default ringtone.
# ro.ringtone_query_wait_time=1500
# when set to 1, Google Maps NetworkLocationService
# (designed to be constantly running since gmaps 5.1.0)
# won't be kept in RAM anymore, unless Google Maps really need it
#
# set this property to 0 if you rely on Latitude service
# to automatically report your location (bye bye, free RAM)
persist.sys.gmaps_hack=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
wifi.interface=eth0
ro.telephony.ril_class=samsung
ro.telephony.sends_barcount=1
mobiledata.interfaces=pdp0,eth0,gprs,ppp0
dalvik.vm.dexopt-flags=m=y
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=64m
persist.sys.purgeable_assets=0
ro.compcache.default=0
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
dev.sfbootcomplete=0
persist.sys.vold.switchexternal=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.kernel.android.checkjni=0
dalvik.vm.checkjni=false
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.modversion=CyanogenMod-9-GT-S5360
dalvik.vm.dexopt-data-only=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android-Maroc-OS
#ro.config.play.bootsound=1
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
If this is the build.prop
Then the only thing he changed was
ro.build.display.id=GamerR (kept it deliberately)
To keep his name on the ROM and be popular!!!!
Guys, don't fool around.
Galaxy Y sucks to it's heights. CM 7 kernel didn't even work.
Master_Key said:
If this is the build.prop
Then the only thing he changed was
ro.build.display.id=GamerR (kept it deliberately)
To keep his name on the ROM and be popular!!!!
Guys, don't fool around.
Galaxy Y sucks to it's heights. CM 7 kernel didn't even work.
Click to expand...
Click to collapse
Dude lets give him a chance.. Let him have a try in this approach too.we have tried porting frm ace mini nd pop all failed.may be sometimes a new approach could give us a good news some day.let him try.
I tried the ROM, it didnt boot but the galaxy y logo kept blinking I havnt seen this kind of bootloop
trust me I have seen many
Sent from my GT-S5360 using xda premium
!!! WARNING !!! These both contain bootloaders!
If you don't know what these are, or how to use them, or want to keep root, I would suggest hitting the back button.
As usual, thanks to my anonymous source!
I337UCUFMLD_OneClick.zip (I337UCUFMLD_OneClick.exe)
Download: http://www.androidfilehost.com/?fid=23329332407566813
MD5: AD1150D2F94852912249F9D8476D461A
SIZE: 1.51GB
I337UCUFMLD.zip
Download: http://www.androidfilehost.com/?fid=23329332407566810
MD5: B3E3C180DC8128D4532E39CD29950BB5
SIZE: 1.51GB
Known Issues:
Sporadic device reboot is observed when using video codec related function. This is due to an issue related to video codec.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.I337UCUFMLD
ro.build.version.incremental=I337UCUFMLD
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Jan 2 17:30:32 KST 2014
ro.build.date.utc=1388651432
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDC3404
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.4.2 KOT49H I337UCUFMLD release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.4.2/KOT49H/I337UCUFMLD:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUFMLD
ro.build.hidden_ver=I337UCUFMLD
ro.build.changelist=232901
ro.product_ship=false
ro.chipname=apq8064
# end build properties
#
# from device/samsung/jflteatt/system.prop
#
#
# system.prop for surf
#
ro.sf.lcd_density=480
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=0
lpa.decode=false
tunnel.decode=true
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=false
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# System proverty for sys info indication
persist.radio.add_power_save=1
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
# Boot animation fps
boot.fps=25
media.enable-commonsource=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
persist.log.seclevel=1
persist.translation.assistant=0
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.hdcp2.rx=tz
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=1
security.mdpp.result=None
ro.security.mdpp.ux=Enabled
ro.sec.fle.encryption=true
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=on
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.4_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.knox=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
yes
Thanks Designgears I'm happy with 4.3 and Safe strap for now. What is the difference between the 2 one clicks?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
dave5777 said:
Thanks Designgears I'm happy with 4.3 and Safe strap for now. What is the difference between the 2 one clicks?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
2 OneClicks?
Also, unquote the OP.
----------------------
OMG, I actually have a change log for this
Never seen these before are they one clicks for Odin? I know it says to skip if we don't know what they are but I've never seen them and would like to learn about this stuff. Well I know one is a one click but is it for Odin is tthe other a adb sideload zip?
raulz28 said:
Never seen these before are they one clicks for Odin? I know it says to skip if we don't know what they are but I've never seen them and would like to learn about this stuff. Well I know one is a one click but is it for Odin is tthe other a adb sideload zip?
Click to expand...
Click to collapse
No these are the partition images which, assuming they include the sammy signatures, can be tarred up and flashed with Odin. But they include a new bootloader which means that once you flash it you are stuck and can't go back to MK2.
muniz_ri said:
No these are the partition images which, assuming they include the sammy signatures, can be tarred up and flashed with Odin. But they include a new bootloader which means that once you flash it you are stuck and can't go back to MK2.
Click to expand...
Click to collapse
Ok thanks I know that if we update our phone with these we will be stuck but didn't know what they actually were but I'm willing to take the plunge and flash this leak and see how it goes.
raulz28 said:
Ok thanks I know that if we update our phone with these we will be stuck but didn't know what they actually were but I'm willing to take the plunge and flash this leak and see how it goes.
Click to expand...
Click to collapse
You are braver than I am. Good luck.
raulz28 said:
Never seen these before are they one clicks for Odin? I know it says to skip if we don't know what they are but I've never seen them and would like to learn about this stuff. Well I know one is a one click but is it for Odin is tthe other a adb sideload zip?
Click to expand...
Click to collapse
OneClicks are files that include their own form of ODIN in the package. You don't need to use ODIN because it already has it. And you are correct, it clearly states in the OP if you don't know what it means to to leave. You need to learn what things are and how to use them before you come to a Development forum. Fortunately, there is a lot of information available through Google Search and a lot of tutorials. The people that don't do this or think they don't need to do this are the ones that end up in the Q&A section begging others to help them.
And thanks DesignGears for posting another early firmware leak.
Can someone extract the modem on this?
Thanks Designgears... awesome leak
I may have to put this on one of my spare S4's and play around with it. Going to wait a few days though.
Thanks For I337UCUFMLD
Sir ,
Please Tell Me ... How To Install .. I Want To Install 4.4.2 Kitkat Update :angel:
Thank you designgears
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
raulz28 said:
Thank you designgears
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I see that Samsung stuck with the same colored icons and green battery in the status bar. I thought they would change to white like the other KK leak screenshots floating around.
Meh, oh well
Now we just need root and a SS build.
Psych0t1c20 said:
Now we just need root and a SS build.
Click to expand...
Click to collapse
I'm trying to find ways to root right now.
raulz28 said:
I'm trying to find ways to root right now.
Click to expand...
Click to collapse
Awesome. Goodluck.
You are so brave
raulz28 said:
I'm trying to find ways to root right now.
Click to expand...
Click to collapse
Just be careful ...... unless u know what u doing .... we dunno if there is UNBRICKED method yet.....or if this OneClickTool able to get u back to stock MLD if u bricked......:good::good::good:
What's the difference between the two files?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Please Post Screenshot Of " Notification Panel "
[QUOTE=ra
Please Post Screenshot Of " Notification Panel "
They Add Mobile Data Toggle