I9001 VALUE PACK
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQB
ro.build.version.incremental=XXKQB
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Tue Mar 20 11:04:55 KST 2012
ro.build.date.utc=1332209095
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL176
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQB release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQB:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQB
ro.build.hidden_ver=I9001XXKQB
ro.build.changelist=1044586
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
CHANGES
>Can take pictures while video recording
>Touchwiz V4.0 (but the same old icons)
>Photoeditor
>Option to change font size under "Accessibility"
>Face recognition
>Camera (seems to focus faster)
>GPU drivers
>Autorotation is faster
I checked the gpu drives there's one file repacked
but it doesn't change the score
It seems they have made a slight change in the gpu drivers.
Please test some HD games and give feed back. (A slight tweak could have done the trick)
Compared the build.prop whith the KQ7 one
No major changes.
BUGS
1)The dock reset's to it's original layout after clearing the RAM or rebooting (thank's to XenoBE)
2)App icons are misplaced after a reboot.
You can Avoid these bugs by deodexing the rom and then doing a factory reset by dialing *2767*3855#
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
http://samsung-updates.com/get/762/Samsung_Firmware_GT-I9001_AUT_I9001XXKQB_Android_2_3_6.html
Thank's to crybert, Here is a deodexed Version of the KQB Firmware.
The zip Package is flashable via CWM/FeaMod an StockRecovery.
https://sourceforge.net/projects/cry...ional Stuff/
Zippyshare link http://www8.zippyshare.com/v/49143861/file.html
It only contains the app/framework folder. So you have to Flash KQB via Odin first.
nail16 said:
I9001
PHP:
DOWNLOAD LINK http://www.hotfile.com/dl/151902003/fbfff2d/I9001XXKQB_I9001OXXKP8_AUT.zip.html
Click to expand...
Click to collapse
nail have u flashed it already? so ? is it the cheap update that's supposed to replace ics ??
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
nail16 said:
I have flashed it its has TW4 so it's super smooth, i'm checking the gpu md5 checksum to see if there are any changes
Click to expand...
Click to collapse
let's hope so, and hopefully better RAM mangement
Is there any problems with WiFi?
Sent from my GT-I9001 using xda premium
Waiting for some screenshots.
Finally..... Please post some screenshot, antutu benchmark, wi-fi experience, GPU, battery usage and etc
He already posted some screenshots. Look in the first comment.
**** this, It has the same old gpu drivers
i'll post the antutu scores
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Gusta_HR said:
What about lockscreen, how does it looks like, and power menu? Is it laggy?
Click to expand...
Click to collapse
The lockscreen is not laggy, its very smooth. And it looks like the Galaxy Note lockscreen. The phone is not laggy at all.
It's XXKQ7 with the new added crapwiz v4.0 and the premium **** (photo editor,face lock)
Browser is the same still can see the Checkered boxes while scrolling large pages
hmm... 19 min of odin flash still on system.img.ext4 download , i'm starting to get worried
Edit: finally ,after 21 min odin decided to finish
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
is this the official value pack?
Fukin bastards didn't bother to update the apps
samsung = Bunch of assholes
Gusta_HR said:
I think i will not flash it... dont like tw 4.0 it has lots of wasted space between dock icons and screen... one word this is crap...
Click to expand...
Click to collapse
trust me it is quick, the old touchwiz is slow, this one kills it, scrolling in app drawer has never been this quick on a stock touchwiz
210mb average RAM used without anything installed, too much in my opinion,i think 180mb (as on SGS) would've looked nice.
the auto rotation is also tweaked, try watching a youtube video and rotating to landscape, it takes less than a sec
also as mentioned before, lockscreen is not laggy (for now).
Edit: Gallery loads very guickly. camera app has the snapshot icon durin video recording. autofocus still not present (at least according to my eye) .
XenoBE said:
Ive found already a bug :s
When i was adding a widget, and i pushed the back button, the homescreen was stuck in the "adding-widget" like homscreen, you can do everything but the homescreens are smaller. The only thing you can do is reboot.
Click to expand...
Click to collapse
I encountered the same bug. One workaround is add a shortcut to the screen and then delete it. Worked for me now 3 times...
Is this Value Pack is Official Release or Custom Made ?
and it is KQ7
and on Samfirmware there Switzerland Rom which is KQB 2012 April Release
Which one Should we install and
is wifi problem solved in this pack ?
Related
This is the stock rom I9001 2.3.4 and 2.3.6 (value pack) DDKPE
Here is the link,,,
Link updated...for DDKP5 STOCK ROM
http://ubuntuone.com/6i05hrHot7BuSpWYXGHw9V
Valuepack ROM released for GS+9001 for India... Here is the link. I will add details later.....or somebody can help...
http://ubuntuone.com/4xeNroJ1m3mxGBS24On9MY
Enjoy
nikku_hot123 said:
can anybody give me I9003DDKPE stock rom for gingerbread 2.3.4?
Click to expand...
Click to collapse
Can you tell me why do you need that rom.Maybe I can help you with different.
Why you are asking for 9003 in 9001 forum?
Sent from my GT-I9001 using XDA App
I accidently deleted My stock twlauncher and i am unable to restore it. I am afraid of warranty voilation.
That is why i want stock Rom.
Sorry its I9001...edited.
Alternate
Ok so i cant help u find the stock 2.3.4 but if your phone isnt working as in u've got a black screen with the notification bar get a launcher like launcher pro or adw on your computer and send it via bluetooth and in the notification install it. atleast ur phone will work until u can find the rom u are looking for.
I got it if anybody needs it please tell me....
Sent from my GT-I9001 using XDA App
I need it. Can you upload it or post the link
Sent from my GT-I9001 using XDA App
I am at office now. I will upload it when I will reach my home.
Sent from my GT-I9001 Cranium RC2 using XDA App
sahilkhurana said:
I need it. Can you upload it or post the link
Sent from my GT-I9001 using XDA App
Click to expand...
Click to collapse
uploaded !!!!! check my first post. And say thanks!!!
link updated!!!!
Thanks buddy !!
Value pack official indian ROM 2.3.6 Added to first post...
Sent from my GT-I9001 using Tapatalk 2
Ohh no resume support for download
Sent from my GT-I9001 using xda premium
Great to see Samsung still cares for their Indian customers
I hope I'll be able to use kies again after flashing the rom.
nail16 said:
Great to see Samsung still cares for their Indian customers
I hope I'll be able to use kies again after flashing the rom.
Click to expand...
Click to collapse
Yeah! after 2.3.4 it directly jumped to 2.3.6. it was out on april last week.
@nail can you test with stock 2.3.4 with kies whether it is asking for update? unfortunately i have no data cable now..
Sent from my GT-I9001 using Tapatalk 2
I had installed 2.3.4 before but kies wouldn't support the phone, it would always show "this Device cannot be updated via kies"
i'm flashing 2.3.6 now.
btw from where did you get this firmware ? it's isn't there at the sammobile website
nail16 said:
btw from where did you get this firmware ? it's isn't there at the sammobile website
Click to expand...
Click to collapse
I got it from checkfus tool... i was also having the problem with kies.. But i don't remember where did i change registry values and i am not having cable to check..
Sent from my GT-I9001 using Tapatalk 2 Beta-6
It's a .bin file how do i flash this ?
can you provide flashable cwm recovery file???
Sent from my GT-I9001 using XDA
abhi.a3s said:
can you provide flashable cwm recovery file???
Sent from my GT-I9001 using XDA
Click to expand...
Click to collapse
i will try it now
just wait some few hours
here are some infos:
I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.md5
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQD
ro.build.version.incremental=XXKQD
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Sat Apr 7 11:26:35 KST 2012
ro.build.date.utc=1333765595
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL126
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQD release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQD:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQD
ro.build.hidden_ver=I9001XXKQD
ro.build.changelist=1077879
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
I9001XXKQD
Firmware: I9001XXKQD (2.3.6)
Modem: I9001DDKP9
CSC: I9001ODDKP5
Build Date: 17-04-2012
Changlist: 1077879
- multilanguage (global)
- only released in India
Download: I9001XXKQD_I9001ODDKP5_I9001DDKP9_HOME.tar.rar
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQD
ro.build.version.incremental=XXKQD
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Sat Apr 7 11:26:35 KST 2012
ro.build.date.utc=1333765595
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL126
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQD release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQD:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQD
ro.build.hidden_ver=I9001XXKQD
ro.build.changelist=1077879
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r9
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Credits & Thanks to nikku_hot123
CUSTOM CWM ROM based on XXKQD - 2.3.6
rooted
busybox
init.d
deodexed
always the same: installation at your own risk
DOWNLOAD XXKQD FOR CWM
(place the zip-file on your sd card - boot into recovery - install zip from sd card)
(to get the baseband, flash the official release with odin before)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
maybe you will need the feamad recovery to install the zip, get it here
no further development
you can discuss with other user from india here: http://forum.xda-developers.com/showthread.php?t=1670527
TW4 problem solved?
Elmar.Zeinalov said:
TW4 problem solved?
Click to expand...
Click to collapse
no!
texten said:
no!
Click to expand...
Click to collapse
No need to shout.
So it's merely an Indian localisation. Seems that Samsung is no way aware of existing problems. I'm so gonna spam their support.
Elmar.Zeinalov said:
No need to shout.
So it's merely an Indian localisation. Seems that Samsung is no way aware of existing problems. I'm so gonna spam their support.
Click to expand...
Click to collapse
i didn't shout. i wrote in red bold color, so everybody can see it and does not need to ask again
i'm waiting for a fixed touchwiz launcher 4, but it seems Samsung is busy with android 4
I was searching for indian value pack....
Sent from my GT-I9001 using xda premium
shubham412302 said:
I was searching for indian value pack....
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
there it is enjoy!
I can't see this firmware on sammobile.com ?
nail16 said:
I can't see this firmware on sammobile.com ?
Click to expand...
Click to collapse
xxkqe is also not listed there...
edit: oh they have added kqe ..
kqd is an official india release, ask google
Anyways did you check if there were any new files in this rom ?
broodplank had found a difference between XXKQE and XXKQB
edit:I hope one day samsung will release ICS for our phone, the phone sale is quite good here in India maybe they will reconsider releasing an ics upgrade.
nail16 said:
Anyways did you check if there were any new files in this rom ?
broodplank had found a difference between XXKQE and XXKQB
edit:They haven't updated the apps in this one, I hope one day they will release ICS for our phone
Click to expand...
Click to collapse
haven't found something new
nail16 said:
Anyways did you check if there were any new files in this rom ?
broodplank had found a difference between XXKQE and XXKQB
edit:I hope one day samsung will release ICS for our phone, the phone sale is quite good here in India maybe they will reconsider releasing an ics upgrade.
Click to expand...
Click to collapse
Did a compare and found that wpa_supplicant is the responsible one for the working WiFi also some other files changed but I'm pretty sure it's wpa_supplicant
Does It Have Samsung Arabic Keyboard >?? input ??
Please confirm >
any screenshots???
Sent from my GT-I9001 using XDA
it's the same like kqb. no need for screenshots
texten ... Which languages included ?
Sent from my GT-I9001 using xda premium
Just updated this rom today its as good as xxkqb.
Sent from my GT-I9001 using XDA
CodeXpert said:
texten ... Which languages included ?
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
the same as in kqb... no arabic
Thanks bro.
Sent from my GT-I9001 using xda premium
build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.UCLF6
ro.build.version.incremental=UCLF6
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Sat Jun 23 20:19:08 KST 2012
ro.build.date.utc=1340450348
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-79
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I727
ro.product.brand=samsung
ro.product.name=SGH-I727
ro.product.device=SGH-I727
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-I727
ro.tether.denied=false
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-I727-user 4.0.4 IMM76D UCLF6 release-keys
ro.build.fingerprint=samsung/SGH-I727/SGH-I727:4.0.4/IMM76D/UCLF6:user/release-keys
ro.build.characteristics=default
# Samsung Specific Properties
ro.build.PDA=I727UCLF6
ro.build.hidden_ver=I727UCLF6
ro.build.changelist=735228
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
dalvik.vm.heapsize=64m
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
persist.sys.hdmi.on=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=17
# system prop for issue regarding writable directories(SDT)
#
ro.kernel.qemu=0
#
#
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
#camera changes..r.mewar
persist.sys.camera.transform=0
persist.sys.camera.connect=0
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System property for cabl
ro.qualcomm.cabl=0
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
# system prop for adb_notification
persist.adb.notify=0
# system prop for usb_notification
persist.usb_mass_storage.notify=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
# for 480x800 panel
ro.sf.lcd_density=240
#add camera sound property for KOR concept
ro.camera.sound.forced=1
# Set default ringtone for Korea concept
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=over_the_horizon_preview.ogg
# System property for SIM
persist.radio.apm_sim_not_pwdn=1
# System prop for qmi adb log
persist.radio.adb_log_on=1
# Multimedia prop for Smart View
media.enable-commonsource=true
# System proverty snapshot disable
persist.radio.snapshot_disabled=1
# System property for UMS
persist.ums.popup=0
# System proverty for sys info indication
persist.radio.add_power_save=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
drm.service.enable=true
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.error.receiver.default=com.samsung.receiver.error
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
ro.opengles.version=131072
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.secdirenc=true
ro.secsddecryption=true
ro.secfulldirenc=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Source: @SGS2Update
this is it! Checkfus is showing the new firmware! i727UCLF6!
Pulling it down via KIES now...
BaconStep said:
this is it! Checkfus is showing the new firmware! i727UCLF6!
Click to expand...
Click to collapse
Does this mean we can go back to 2.3.5 stock and update to ICS officially?
UCLF6 modems
Here's the UCLF6 modems, CWM flashable: UCLF6 modems
(Just flashed the modems, but I'm sticking with CM9 nightlies for now.)
Downloading Kies now, will test it out when I get home.
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
UCLF6 ODIN flashable
UCLF6 ODIN flashable, from sammobile (direct link): I727UCLF6_I727ATTLF6_ATT.zip
Dismal Shadow said:
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
Click to expand...
Click to collapse
Me neither, but I'll take the radio (thanks cschmitt!)..
petrochemicals said:
Does this mean we can go back to 2.3.5 stock and update to ICS officially?
Click to expand...
Click to collapse
No need for that, just grab the ODIN flashable version and flash is over whatever you're running now (nandroid first, of course!)
i notice this is for i727 so will it work on i727r?
Dismal Shadow said:
Meh, it won't make me turn away from CM9
Sent from my SGSII Skyrocket running CM9 using Tapatalk 2
Click to expand...
Click to collapse
Yup but this means source drops soon! Our kernel source for our phone instead of hercules means less bugs!
Holy mother of god. I can't believe it's here! Thanks for posting this cschmitt!
Now we just need to deal with incessant "When is official Jellybean coming?" threads for the next few months.
This is the official ATT version right? I thought rogers already had ICS
nest75068 said:
This is the official ATT version right? I thought rogers already had ICS
Click to expand...
Click to collapse
Correct, Rogers ICS has been on sammobile.com for about a month now.
What a shocker, it rolls out right after the Galaxy S3's ship out... Amazing coincidence!
/conspiracytheory
skrambled said:
Correct, Rogers ICS has been on sammobile.com for about a month now.
Click to expand...
Click to collapse
the kernel and radio will be different so would this att sammobile odin tar flash on a i727r?
or is it even worth the bother? i'll assume there will be no difference between this and the rogers 4.0.4
cschmitt said:
Here's the UCLF6 modems.
(Just flashed the modems, but I'm sticking with CM9 nightlies for now.)
Click to expand...
Click to collapse
Thanks hit.
Not noticing a big difference in UL/DL speed on the UCLF6 modem. Wasn't expecting anything either. Latency seems to be a bit better overall.
taranis17 said:
Thanks hit.
Not noticing a big difference in UL/DL speed on the UCLF6 modem. Wasn't expecting anything either. Latency seems to be a bit better overall.
Click to expand...
Click to collapse
oh well ill stick with rogers 4.0.4
Popcorn,
Since your on Rogers, I would highly recommend to NOT download and install the ATT Version. You would need the SGH-I727R version. The slight differences between the 2 can become catastrophic.
New firmware available on SAMMOBILE or you can use the http://fus.nanzen.se/ webpage and utility to download:
Region Baltic
Date 2012 July
Android 2.3.6 (possibly value pack)
I9001XXKQI/I9001OXFKQ3/I9001XXKPM/I9001XXKQI
download location: http://www.hotfile.com/dl/164483305/...3_SEB.zip.html
Cant flash this till the afternoon so if anyone else tries this, please inform us about possible changes or TW fixes.
------
TW is still buggy (thanks to Texten for reporting)
Downloading , will post my review later.
morofaya said:
Downloading , will post my review later.
Click to expand...
Click to collapse
Seems changelog is the same
Pezmet said:
Seems changelog is the same
Click to expand...
Click to collapse
nope:
PDA: I9001XXKQI
CSC: I9001OXFKQ3
Version: 2.3.6
Date: 2012-07-24
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Download: http://www.hotfile.com/dl/164483305/37592e1/I9001XXKQI_I9001OXFKQ3_SEB.zip.html
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XXKQI
ro.build.version.incremental=XXKQI
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 29 09:28:57 KST 2012
ro.build.date.utc=1340929737
ro.build.type=user
ro.build.user=dpi
ro.build.host=DELL170
ro.build.tags=release-keys
ro.product.model=GT-I9001
ro.product.brand=samsung
ro.product.name=GT-I9001
ro.product.device=GT-I9001
ro.product.board=GT-I9001
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQI release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQI:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9001XXKQI
ro.build.hidden_ver=I9001XXKQI
ro.build.changelist=[COLOR="Red"]1159246[/COLOR]
ro.flash.resolution=720
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
#
# system prop for opengles version
#
ro.opengles.version=131072
# Samsung USB default mode
persist.service.usb.setting=0
#
#System property for qemu
#
ro.kernel.qemu=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=01_Minimal_tone.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
wifi.interface=eth0
wifi.supplicant_scan_interval=15
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
media.stagefright.enable-player=1
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=2.3_r10
ro.com.google.clientidbase=android-samsung
ro.secdevenc=true
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
have it extracted right now. will test touchwiz launcher
Will test it and reply
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
Good work once again Samsung...
Thanks texten. I will update first post.
texten said:
ok, touchwiz launcher 4 is still buggy.
Click to expand...
Click to collapse
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
cjason said:
A small question: where did you get the attached file from? I just extracted the TW app from ROM system image and the MD5 is different... Also smaller - 1.75MB
Click to expand...
Click to collapse
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
texten said:
just extract the "rom".tar.md5 with 7zip, use the cygwin kitchen and set up a working folder with cache.img.ext4, system.img.ext4, and boot.img
then you can deodex the rom and use single apk's
Click to expand...
Click to collapse
Oh, it's a deodexed apk... This explains the difference
Thanks.
Anyway, too bad it's the same BS...
Is there any improvements?
who cares about samsung roms.. as we've got some aospish
Sent from my GT-I9001 using xda app-developers app
They must give ics not gb
Sent from my GT-I9001 using xda premium
texten said:
ok, touchwiz launcher 4 is still buggy.
maybe someone should test the launcher with this whole rom. just to be sure.
and maybe something is fixed, like lockscreen?
Click to expand...
Click to collapse
Lockscreen can be fixed for no wallpaer with fix permisions
Pezmet said:
Lockscreen can be fixed for no wallpaer with fix permisions
Click to expand...
Click to collapse
i mean the charging notification
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
quendil said:
Are you talking about CWM recovery fix permissions ???
Is there a chance TW can be fixed with fix permisssions as well ???
Or by deodexing ???
Click to expand...
Click to collapse
Feamod recovery, yes TW no.. even with hard to kill launcher from V6 same issues accor.
If someone can post a deodexed rom it will be great.
Thank you
It has new baseband version: XXKPM
For who it is interested to flash through odin only the baseband you can download in "porting state post"
I have wiped up a batch of ICS for Galaxy Y. It isn't build from source(I abandoned that project). I'm not assuring you whether it'll boot or not. It is only for devs.
Use it at your own risk.
*My phone's IC curcuit went for a toss. So, I can't test it for the time being.*
*Don't ask unnecessary question like "How did I port it ?"
Test it and report
Tester
Install merruk pre-2.0 kernel
Format System
Mount System
Install ICS
Wipe Data
Reboot
ICS??
another ics port again?
U've try?
hears good,its portet from an original ics source?
Anyone tried this ?? Boot or not ? Waiting .. :beer:
Sent from my GT-S5360 using xda premium
(Deleted)
Any news??
Sent from my GT-S5360 using xda premium
tjsgy said:
Downloading!
Will Download later
Click to expand...
Click to collapse
Waiting for ur reply !
Sent from my GT-S5360 using xda premium
any tested news guys???
Sent from my GT-S5360 using xda premium
if you want to know you can test it by yourself (lol)
kurotsugi said:
if you want to know you can test it by yourself (lol)
Click to expand...
Click to collapse
lol....y did i couldn't have such brilliance,dat i too can test it...???
may b cos i know dat im ntt devlper,bt u dnt know.
Sent from my GT-S5360 using xda premium
Sorry!!
I said I am downloading, but internet not working properly so I wont be able to test today, will report as soon as i test
*Note* If the rom isn't booting then replace libandroid_runtime.so from file attached below. Location /system/lib
If still not working then I'll ask the Moderator to lock this thread. I'll reopen it after porting Galaxy Chat's firmware to Galaxy Y
Bootloop
Replaced the file still Bootloop
Sources ?
Gamer R said:
*Note* If the rom isn't booting then replace libandroid_runtime.so from file attached below. Location /system/lib
If still not working then I'll ask the Moderator to lock this thread. I'll reopen it after porting Galaxy Chat's firmware to Galaxy Y
Click to expand...
Click to collapse
Firmware isn't released !
Or is it ?
@OP is this really a ported version from galaxy chats ICS? If yes then lets start debugging the port.
@Testers if you are about to test it or have already done it then pls give logcats
it is GB Not ICS ! HE FOOLED US.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=GamerR
ro.build.version.incremental=eng.Maroc-OS.20120515.140328
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=June 20 14:03:55 BRT 2012
ro.build.date.utc=1337101435
ro.build.type=userdebug
ro.build.user=Maroc-OS
ro.build.host=android.merruk.ma
ro.build.tags=test-keys
ro.product.model=GT-S5360
ro.product.brand=samsung
ro.product.name=GT-S5360
ro.product.device=galaxy-y
ro.product.board=totoro
ro.product.cpu.abi=armeabi-v6l
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=TOTORO
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=GT-S5360-user 2.3.7 GRJ22 eng.Maroc-OS.20120515.140328 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.7/GINGERBREAD/GRJ22:user/release-keys
ro.cm.device=totoro
# end build properties
#
# system.prop for Galaxy Y
#
# Audio/Video/Screen/OGL related stuff
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.jpeg.quality=85,75,65
ro.media.enc.hprof.vid.bps=8000000
# BT / Wifi / Net related
net.bt.name=Android-Maroc-OS
net.dns1=8.8.4.4
net.dns2=8.8.8.8
# Network settings + 3G/EDGE Hacks
ro.ril.hep=1
ro.ril.hsxpa=1
ro.ril.enable.dtm=1
ro.ril.gprsclass=10
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.enable.3g.prefix=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995,113,115,1530,1522 \
ro.ril.emc.mode=2
ro.com.android.dataroaming=false
# Managing modem answere on switch from 2G to 3G
ro.ril.ntmodeglobal=true
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.startheapsize=32m
#dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapsize=64m
dalvik.vm.checkjni=false
# Misc
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
rild.libpath=/system/lib/libbrcm_ril.so
ro.telephony.ril_class=samsung
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# keep apps in memory
#sys.keep_app_1=com.android.inputmethod.latin
#sys.keep_app_2=
#sys.keep_app_3=
#sys.keep_app_4=
# Speed tweaks:
ro.kernel.android.checkjni=0
# to spare some RAM
persist.sys.purgeable_assets=1
# more speed
persist.sys.use_dithering=0
# This defines the max event window manager can handle in 1 s.
windowsmgr.max_events_per_sec=150
# Maximum time (in msec) we allow the CallerInfo query to run,
# before giving up and falling back to the default ringtone.
# ro.ringtone_query_wait_time=1500
# when set to 1, Google Maps NetworkLocationService
# (designed to be constantly running since gmaps 5.1.0)
# won't be kept in RAM anymore, unless Google Maps really need it
#
# set this property to 0 if you rely on Latitude service
# to automatically report your location (bye bye, free RAM)
persist.sys.gmaps_hack=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
wifi.interface=eth0
ro.telephony.ril_class=samsung
ro.telephony.sends_barcount=1
mobiledata.interfaces=pdp0,eth0,gprs,ppp0
dalvik.vm.dexopt-flags=m=y
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=64m
persist.sys.purgeable_assets=0
ro.compcache.default=0
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
dev.sfbootcomplete=0
persist.sys.vold.switchexternal=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.kernel.android.checkjni=0
dalvik.vm.checkjni=false
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.modversion=CyanogenMod-9-GT-S5360
dalvik.vm.dexopt-data-only=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android-Maroc-OS
#ro.config.play.bootsound=1
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Ashutos1997 said:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=GamerR
ro.build.version.incremental=eng.Maroc-OS.20120515.140328
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=June 20 14:03:55 BRT 2012
ro.build.date.utc=1337101435
ro.build.type=userdebug
ro.build.user=Maroc-OS
ro.build.host=android.merruk.ma
ro.build.tags=test-keys
ro.product.model=GT-S5360
ro.product.brand=samsung
ro.product.name=GT-S5360
ro.product.device=galaxy-y
ro.product.board=totoro
ro.product.cpu.abi=armeabi-v6l
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=bcm21553
# ro.build.product is obsolete; use ro.product.device
ro.build.product=TOTORO
# Do not try to p**** ro.build.description or .fingerprint
ro.build.description=GT-S5360-user 2.3.7 GRJ22 eng.Maroc-OS.20120515.140328 release-keys
ro.build.fingerprint=samsung/GT-S5360/GT-S5360:2.3.7/GINGERBREAD/GRJ22:user/release-keys
ro.cm.device=totoro
# end build properties
#
# system.prop for Galaxy Y
#
# Audio/Video/Screen/OGL related stuff
ro.media.dec.vid.wmv.enabled=1
ro.media.dec.aud.wma.enabled=1
ro.media.dec.aud.flac.enabled=1
ro.media.dec.vid.avi.enabled=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.jpeg.quality=85,75,65
ro.media.enc.hprof.vid.bps=8000000
# BT / Wifi / Net related
net.bt.name=Android-Maroc-OS
net.dns1=8.8.4.4
net.dns2=8.8.8.8
# Network settings + 3G/EDGE Hacks
ro.ril.hep=1
ro.ril.hsxpa=1
ro.ril.enable.dtm=1
ro.ril.gprsclass=10
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.enable.3g.prefix=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995,113,115,1530,1522 \
ro.ril.emc.mode=2
ro.com.android.dataroaming=false
# Managing modem answere on switch from 2G to 3G
ro.ril.ntmodeglobal=true
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.startheapsize=32m
#dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapsize=64m
dalvik.vm.checkjni=false
# Misc
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
rild.libpath=/system/lib/libbrcm_ril.so
ro.telephony.ril_class=samsung
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=mdp
dalvik.vm.heapsize=64m
ro.sf.lcd_density=120
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# keep apps in memory
#sys.keep_app_1=com.android.inputmethod.latin
#sys.keep_app_2=
#sys.keep_app_3=
#sys.keep_app_4=
# Speed tweaks:
ro.kernel.android.checkjni=0
# to spare some RAM
persist.sys.purgeable_assets=1
# more speed
persist.sys.use_dithering=0
# This defines the max event window manager can handle in 1 s.
windowsmgr.max_events_per_sec=150
# Maximum time (in msec) we allow the CallerInfo query to run,
# before giving up and falling back to the default ringtone.
# ro.ringtone_query_wait_time=1500
# when set to 1, Google Maps NetworkLocationService
# (designed to be constantly running since gmaps 5.1.0)
# won't be kept in RAM anymore, unless Google Maps really need it
#
# set this property to 0 if you rely on Latitude service
# to automatically report your location (bye bye, free RAM)
persist.sys.gmaps_hack=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.rommanager.developerid=cyanogenmod
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
+=wifi.interface=wl0.1
wifi.interface=eth0
ro.telephony.ril_class=samsung
ro.telephony.sends_barcount=1
mobiledata.interfaces=pdp0,eth0,gprs,ppp0
dalvik.vm.dexopt-flags=m=y
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=64m
persist.sys.purgeable_assets=0
ro.compcache.default=0
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
dev.sfbootcomplete=0
persist.sys.vold.switchexternal=1
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.kernel.android.checkjni=0
dalvik.vm.checkjni=false
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.modversion=CyanogenMod-9-GT-S5360
dalvik.vm.dexopt-data-only=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android-Maroc-OS
#ro.config.play.bootsound=1
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
If this is the build.prop
Then the only thing he changed was
ro.build.display.id=GamerR (kept it deliberately)
To keep his name on the ROM and be popular!!!!
Guys, don't fool around.
Galaxy Y sucks to it's heights. CM 7 kernel didn't even work.
Master_Key said:
If this is the build.prop
Then the only thing he changed was
ro.build.display.id=GamerR (kept it deliberately)
To keep his name on the ROM and be popular!!!!
Guys, don't fool around.
Galaxy Y sucks to it's heights. CM 7 kernel didn't even work.
Click to expand...
Click to collapse
Dude lets give him a chance.. Let him have a try in this approach too.we have tried porting frm ace mini nd pop all failed.may be sometimes a new approach could give us a good news some day.let him try.
I tried the ROM, it didnt boot but the galaxy y logo kept blinking I havnt seen this kind of bootloop
trust me I have seen many
Sent from my GT-S5360 using xda premium