Database Info

[Q]

Hello to all,
I create this post, because I have a tablet CEM111 or Flytouch, which does not want to start any more after the change of the Rom, and I do not know any more what to make; thank you for your assistant.
I summarize
Tablet CEM111 ARM11 x220, screen of starting up infotmic " 0.6.1.5 ( 587 ) " when she(it) worked!
Already installed Rom:
- 1-android_2.1_2-6-32-9_infomix_Flytouch II " OK, nothing to say as about origin "
Installed with cable USB M/M and the tool Burntool_75
- 2 - then the Rom Android 2.1 v2.2-v3245 froyo " OK, work, except the webcam "
Installed with microSD and the tool win32diskimager
- 3-la Rom flash10.1-android2.2-20110416-v1001 " flash works, but problem of Ethernet, WiFi and more webcam "
Installed with microSD
- 4-Et the last Rom who in blocked the tablet Zenithink ZT-180 Android 2.2 zt-update
Installed(Settled) with the tool burntool_7.41
I installed files below:
System.pack.img
userdata.pack.img
zImage (1024x600
ZT_Bx.boot
ZT_Bx.spl " I think that his(her,its) this file which my raised by the problems? "
Results : in the started, the screen remains black, the tablet begins vibrating continues only a RESET stops it.
She no boot not any more on the SD
Function menu + power for usb does not work any more the recovery: to power + home either buttons: Home + Round Button of the face of the touch-sensitive screen + Power, nothing either
I tested all the buttons in combination with power no result.
And last attempt, defused(unsettled) the tablet and disconnected the alim. (24 hours) absolutely nothing.
Thank you in advance for all your ideas, I stall ….

Anybody cannot help me??????
On others forum, I found the same problem, but no solutions.
Thus, needs he(it) to conclude tablet from it HS or too technical ??

Help with Natpc x210 also known as Kingpad Flytouch 9

Hi There
I'm fairly new to this android stuff but starting to get my head round some of it, I have a Natpc x210 also known as Kingpad Flytouch 9 I have managed to root it but now there are some things I would like to do
First I would like to back up my original firmware and from what I have read I need to use clockwork but I get an error message when I try and install this saying it isn't compatible with my tablet so does anyone know how I can do a backup of my original firmware (rom).
I would also like to edit the build prop to try and cure the incompatibility of some of the game on Google market, would it be possible for someone to tell me what exactly to edit in the build prop, I have heard of people putting there tablets into a loop and almost bricking them so I want to be sure what I'm doing.
And I would also like to know if there are any custom Roms I could try on this tablet.
Below is the spec
CPU : Rockchip Dual Core (2 x 1.5GHz)
Graphics Processor : 4 x Mali 400 MHz
Touchscreen : 1024 x 600 10-point touch 10.1" CAPACITIVE;
Operating System : Android 4.1.1 JELLY BEAN
Memory : 1GB DDR III / 16GB NAND Flash - upgradeable by Micro SD memory card (max 32GB)
WiFi : 802.11 b/g/n
Connectivity : 1 x Micro SD slot, 1 x AC Jack, 1 x 3.5mm Earphone Jack, 2 x MINI Size USB, 1 x mini HDMI out
Camera : 0.3mp Front facing / 2.0mp rear facing
Android Market / Google Play Store : YES
G Sensor : YES
Dimensions : 253 x 167 x 13mm
Weight :480g
Cheers
Fermec

Hi fermec i don't have any answers for you but wondering if you cold help me i have the same device as you and am trying to root it. Could you post the method you used.,especaly how to get usb driver, thanks

I came across this post for rooting Rockchip 3066 tablets.
How to Root Teclast A10 Dual-core
The tool is all in Chinese but you don't need to read whats happening anyway. The tablet reboots itself twice. After the first reboot I had to hard reset.
These are the steps.
Install app on Windows (7Pro x64)
turn developer mode on device (Sumvision Cyclone Titan 9.7", Rockchip 3066, Mali400, Android 4.0.4)
plug the device in and wait for the tool to recognize it
click the button next to the only english word on the app 'ROOT'
wait a minute or two and the device reboots
i had to hard reset here
turn on device again
after a minute the tablet rebooted
walla, Rooted rockchip 3066 device.
link for Root Tool
http://www.multiupload.nl/5L8T1YRAC6
I have managed to root my tablet (natpc x210) using this method but this is the way had to do it, to get my laptop win xp 32bit to see the tablet i had to install ADB Driver this is a setup file then I attached the laptop put the tablet in usb debug mode, then I started the software and it automatically sees the tablet, then just click root wait for it to finish and that is it rooted,
Worked a treat for me
Fermec

Thanks for reply and links, did all of that wasn't sure about ABD thing so i used morobo ,now my tablet says it's rooted according to a few apps that check for root but the apps i want eg titanium rb sync wont install any thoughts ?. Thanks again for your help

Maybe you need to install busybox to make them run properly?

flytouch 9
omgomg said:
Maybe you need to install busybox to make them run properly?
Click to expand...
Click to collapse
I use this metod ,stuff24.de/blog/howto-root-minix-neo-x5-g4-rk3066/
use update 1 ,and install supersu.
Working good For flytouch 9

Is there a custom rom avalible for Natpc x210 also known as Kingpad Flytouch 9

[Q] GoClever R75 - failed flash

So basically i failed to flash + install cwm , and now tablet isn't working. Problem is that tablet is no more seen by windows as RK29 , but as unknown device and any drivers didn't help. RK29 update tool , rkbatchtool and adb doesnt detect him. Tablet couldnt be switched off nor set in service mode by physical home button, it just turn by himself on. Physical reset button works.
Also tried with (had hope it in some kind help) inserting sdcard with android img and nothing. Any ideas ? (hope there is better solution than nand programator device).

device ID
USB\DEVICE_DESCRIPTOR_FAILURE
-physical object name
\Device\USBPDO-9
-device status
code 43
also found that after usb cable plugin Rockchip goes incredibly hot.

bump

Anybody found how to set R75 into Mask Rom mode ?

nand model is : hynix h27ubg8t2btr , 4gb version

[Q] flash MTK6575

Hello every one i have an issue here, i got a chinese device a samsung galaxy s(it says its an S4 but i think it is an S3)its a 1Ghz dual core processor if im not wrong(firmware use to say MT6575_S01)
it had loaded apparently a wrong rom, the device wasnt loading OS and restore wasnt working, i tryed to flash a new rom with Android Flash Tools, and the device got bricked, i am able to connected to the computer, the device does not turn on, does not charge, but the PC is able to detected as a MTK USB Port Com.
i found that trying to load different rom with the same tool was not possible cause it gives me an error just before start downloading the info(this is because the device lost connection on the device manager) so it doesnt charge anything.
as i already mention i am able to install drivers, but all of them goes like a Com Port, i used USBDeview and i am able to see the old MTK65xx usb drivers but the direction for that port its not valid(at least it does not recognize the device as a USB directly)
i was wondering if any one can help me with this, i need to know if there is any way to prevent windows from disconecting this device or if there is any way to make the device go on away, if i can do that i am sure i can load the image to it.
BTW i tryed a few roms and some of them tell me they cant complete the process cause not enough space, cause it looks like they are for another device.
my system and device specs (device as far as i can get)
device :
CPU MTK6575
Model: M-9162 cnc moviles (could not find any website related to them)
as far as i know the processor is a 1.2 Ghz dual core
512 RAM
dual SIM
8 MP cam (back)
as far as i know it could be 2MP or 1.3 MP on front
Front camera and sensors are located on the left side(not on the rigth side like most of galaxy S· and S$ even clones)
use battery
model : 303
li-ion 2200mAh(it says samsung)
PC SPECS :
Windows 7 64 bits OS
dual core 2.4Ghx processor
4G on ram.
Please help me with this and i will love you all forever
PD : i belive that the model is a replica of I9200 but not sure .
THANKS.

mk6575 bricked device
as an update i manage it to flash a nand rom apparently for an s3 mt6575 NAND memory, but i am not sure if it is the right one, cause memory on smarth phone android dlashing tool, shows flashing 2g of ram and this is my memory test results :
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x10000000 (256MB/2048Mb)
NAND Flash:
Device ID = "[HYNIX] H8BCS0UN0MCR" (100)
Size = 0x20000000 (512MB/4096Mb)
i went to complete succesfull flashing but only ligths up the menu and back touch keys
apparently goes on but the display remains black
any help please c:

Revive my dead china clone with RK3188 (rockchip-rk31sdk-WAWJMDN1KN)

Hi,
I'm badly need some help to revive my (rockchip-rk31sdk-WAWJMDN1KN).
Perhaps someone will give me idea to allocate proper parameter for recovery , kernel , boot , etc...
Usual location for tablet RK3188 Cortex A9 Quad core 1.6 ghz Governor interactive, Kernel 3.0.36+ ,Board hardware RK30Board/ 0000, Android 4.2.2 ;eng.root 20130912.185132 sdk 17, Display 1280x800; dpi;160 size 9.4'
GPU:Mali-400MP, RAM: 2048 Flash:32 gb Build in:16gb actual, wifi, usb, Bluetooth gps= all yes, camer 5MP additional 1.9MP
I decide to go ahead and try some custom rom using RKAndroidTool did not realize that by cleaning IDB I will low level format..
Before doing that I did save few pictures and run log via "android studio" also I backup whole unit via CWM hoping I will always have access to recovery.Unfortunately that not the case.The good think I still have access to RKAndroidTool( the tool is recognizing my device).
I can post link to my CWM backup if may help.
Inside that CWM backup is kernel.bin, system.bin recovery bin all large sizes files (complete CWM of my last working tablet rk3188). Maybe someone be able to advice how to make proper files to revive my system from that backup I have or help me some how to get recovery working so I can use my CWM backup or any other way to make this tab back to life again..
Many thanks for your kindness and time.
Have nice day
Adam

UPDATE ___
RK3188 adb is running no screen__help PLEASE
After erasing IDB in my unknown china tablet and loosing my whole system I was able to load different custom firmware from Chuwi v88 + different kernel and my Tab popup in windows showing 2 extra drives F and G.I did open android studio and notice access to adb and all activity in my android.The RKandroidTool also recognizing my tab.
No reaction to power button only automatically connecting to my comp ( black screen on my tab).
I have original CWM backup of my device.
Can someone advise me how to access recovery from this point or find the way to completely start my tablet.Maybe is possible to recover CWM from adb?I will need some help to use a proper commands perhaps in adb.