[Q] - Android Software/Hacking General [Developers Only]

Hello to all,
I create this post, because I have a tablet CEM111 or Flytouch, which does not want to start any more after the change of the Rom, and I do not know any more what to make; thank you for your assistant.
I summarize
Tablet CEM111 ARM11 x220, screen of starting up infotmic " 0.6.1.5 ( 587 ) " when she(it) worked!
Already installed Rom:
- 1-android_2.1_2-6-32-9_infomix_Flytouch II " OK, nothing to say as about origin "
Installed with cable USB M/M and the tool Burntool_75
- 2 - then the Rom Android 2.1 v2.2-v3245 froyo " OK, work, except the webcam "
Installed with microSD and the tool win32diskimager
- 3-la Rom flash10.1-android2.2-20110416-v1001 " flash works, but problem of Ethernet, WiFi and more webcam "
Installed with microSD
- 4-Et the last Rom who in blocked the tablet Zenithink ZT-180 Android 2.2 zt-update
Installed(Settled) with the tool burntool_7.41
I installed files below:
System.pack.img
userdata.pack.img
zImage (1024x600
ZT_Bx.boot
ZT_Bx.spl " I think that his(her,its) this file which my raised by the problems? "
Results : in the started, the screen remains black, the tablet begins vibrating continues only a RESET stops it.
She no boot not any more on the SD
Function menu + power for usb does not work any more the recovery: to power + home either buttons: Home + Round Button of the face of the touch-sensitive screen + Power, nothing either
I tested all the buttons in combination with power no result.
And last attempt, defused(unsettled) the tablet and disconnected the alim. (24 hours) absolutely nothing.
Thank you in advance for all your ideas, I stall ….

Anybody cannot help me??????
On others forum, I found the same problem, but no solutions.
Thus, needs he(it) to conclude tablet from it HS or too technical ??

Related

[Q] [q] genesis gt-7104 tablet

I NEED HELP!! GENESIS GT-7104 TABLET .....
Hello, I'm in trouble ... only program that I can not reinstall or get a better version of the android was FWDN, this program does not detect my device at all.
wanted to know if there is another way to do it via USB, as the Android version of gingerbread device and system 2.3.1.
Specifications:
android 2.3 gingerbread
cortex a8 1.2 ghz
512 mb ram
4 gb flash HD
Multi touch
wifi
OpenGL 3D accelerator
''7-inch screen 800 * 480
Digital Camera 1.3
and bla bla bla
- I tried both, but I thought ... a compatible tablet .... and GPAD702
UL identical to the tablet ....
I need to change the android tablet for a previous version or a newer version ... because this version is that the unit has all buggy ...
The machine has 4GB HD recognizes like 2.5 gb of free space ... FWDN used the program, but had no success please help me .....
USB TABLET DRIVER'S GT-7104:
REMEMBERING THAT THE DRIVER TO INSTALL USB RK29, has to be manually.
- But among other problems to be solved, I will still continue their studies here:
1 - To put into order FAST MODE:
- Unplug the appliance, or if you prefer ........... click RESET push the button and the + or button with the arrow ->''right''
Now the device and detected by the pc or is being FAST MODE .... so do not be surprised how FAST MODE''black screen''..
and normal to the model ¬ ° aff ...
- When trying to connect the tablet again .. he will be brik .... NOT SCARE hold the''small''RESET for 3 seconds and release, then hold the''POWER'', he returns to life!
-----------------------------------------------------------------------------
however, I'm behind the solution ... for my tablet .. GT -7104 q may be occurring?!
1 - I was missing the driver can be compatible but not the correct USB driver, I could be wrong ¬¬....
But first comes the tablet mode FAST MODE''black screen''.. how do I know if he is in fast mode''so''?
pressing the ESC key''or''''+''or''home''.
him and recognized by the computer as a device''device rk29''... if I'm wrong correct me please!
2 - Testing the program FWDN, well this program does not detect the tablet ... wanted to use it a lot ...
3 - Testing RKtools the program, the program seems to recognize the tablet, but the program seems to be having problems routing the firmware it says FIRMWARE FAILURE .....'' got lucky huh .....
4 - Testing the ROM Device Manager, but not tested it without the root of the tablet with Android is that 2.3.1 has no root I think ....
PLEASE HELP ME .........................

OMA 1.2 on BQ Pascal2 (Neo x7)

Today i tried to install OMA 1.2 on my BQ Pascal 2 (Neo X7)
After booting the device there is no Touch-Screen Support and it looks like a screen with about 320 dpi.
I tried the Installation twice, with the same issue. Right now i am back on the stock software.
I followed the given steps:
- Downloaded and extracted both Archive Files
- Downloaded the NAND Fix and Pascal 2 Model Fix (copied both to the external SD)
- Shutdown Tablet
- Start the RK App on Windows as Administrator
- Connected the Tablet to USB and hold the vol down key, till it was detected
- Clicked on EraseIDB, then i ticked "Loader" and clicked on "Run"
After about 2 Minutes the Tablet reboots and starts with the Odys Loox Bootscreen, which is not displayed correctly, it looks like zoomed to the middle of the Screen.
I am not able to start CW on a regular way, but it starts after 2 min automatically. Now i installed the NAND Fix and the Pascal 2 Model Fix.
By choosing "Reboot" in CW the tablet crashed and i made a hardware reset.
The first book toot about 5 min, reboot will took at leas 3 min.
After booting i have no touchscreen support and a wrong dpi like described at the beginning of the post.
What i am doing wrong?

The GooApple V5+ - Information thread

GooApple V5+ : iPhone 4/4S Replica
Everything you need to know about it !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
UPDATE : ADDED CMWR 6.0.2.7
____________________
Review Videos
GooApple V5+ Review by AndroidSale
Official GooApple V5+ review
http://v.youku.com/v_show/id_XNDc1MzAwMTIw.html
____________________
Specifications
System
Model: GooApple V5+
Processor: MTK MT6575, 1Ghz - ARMv7
Operating System: Android 2.3.6
Kernel: Linux v2.6.357 ([email protected]) (gcc version 4.4.3 (GCC) )
Ports: 3.5mm Earphone Jack and mini USB
Launcher: iLauncher modified
Partition: MTD
Display
Resolution: 960x640 pixels
Density: 1920x1280
DPI: 320.0
Screen size: 3.5"
Color support: 16 million colors
Functions: Touchscreen, Multi-Touch, Retina
Camera
Front Camera: 1.3 MP
Back Camera: 8 MP
Functions: Flashlight, Zoom, Auto Focus, Scene mode, ISO adjustment, Time Face Detection
Connectivity
Carrier: Unlocked
Network band: GSM 2G: 850/900/1800/1900 MHz and WCDMA 3G: 2100MHz
Data: GPRS, EDGE, HSPA
Message: SMS, MMS, Email
Bluetooth: Bluetooth 2.0
WLan: Wi-Fi IEEE 802.11 b/g/a
USB: USB 2.0
GPS: GPS, built-in GPS chipset (EPO and AGPS)
SIM: Micro SIM card (Single)
Phone Book: More than 10000 contacts
Browser: HTML, Safari
Battery
Type: Built-in Li-on battery ; 1050mAh
Standby Time: 120-150 hours
Talking Time: 3-4 hours
Memory
Built-in Memory : 512 MB
External Memory : 8GB/16GB/32GB (optional : SDcard)
RAM: 512 MB
Phone Model
Replica: 1x1 iPhone 4/4S replica
Dimensions: 115h - 58.6w - 9.3d (mm)
Weight: 135g
Other Features
Button: Mute Button just like iPhone
Video Player: AVI, MP4, 3GP, MOV, MKV, FLV
Audio Player: MP3, FLAC, APE, OGG, AMR, AAC, WAV, AWB
Images: JPG, PNG, BMP, GIF
E-book Format: TXT, CHM, DOC, HTML
Ring Tones: Original iPhone 4 ringtones
Play Store: Google Play Store
Radio: FM Radio
Sensors: Gravity Sensor, Proximity Sensor, Lichtsensor, Accelerator Sensor
Recovery: Stock recovery is E3
Languages
English, French, German, Spanish, Portuguese, Russian, Arabic, Indonesian, Italian, Malaysian, Turkish, Vietnamese, Thai, Chinese
Accesories
1x GooApple V5+ Phone
1x Travel Charger
1x USB Data Cable (I suggest buying a new one)
1x Headphone (if plugged in, both the phone & headphone give sound)
1x Screen Protector (optional)
1x iPhone Skin Case (optional)
- ALL ORIGINAL IPHONE 4/4S CASES, RECHARGERS, HOLDERS, ... ARE COMPATIBLE
____________________
How to Root
This was a hard & long trial to get this phone rooted. Though, it's a very simple way found by me and yuweng, thanks bro!
Based on yuweng's tutorial : MT6577 CWMR Root Updated V2[/b]
Download these and follow the tutorial:
ADB.zip - http://www.mediafire.com/?11cbu388oqu8amw
All the Drivers I could find - http://www.mediafire.com/?wfr5fgkxkdau6w4
CWMR Recovery's.zip - http://www.mediafire.com/?2r30o428558h22q
MTK Rom Studio 1.1.77.146.zip - http://www.mediafire.com/?h22puc8kac6axv7
SP Flash Tool v2.1134.00.zip - http://www.mediafire.com/?ob5caeigzc1ga10
SP Flash Tool v3.1224.0.sn85.zip - http://www.mediafire.com/?5u29nf4fp4omw9n
Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip - http://www.mediafire.com/?fee3e7cta5mg3fp
- Setting up the folders and phone (to make it easy)
1. Create a folder in C:\ called "GooApple"
2. Extract all the ZIP files EXCEPT "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\" so you have 6 folders in GooApple.
3. And copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to "C:\GooApple\"
4. I prefer doing a factory reset before doing this.
* Factory reset can be found at Settings > General > Privacy > Factory data reset > Reset phone
5.Now enable Unknown sources, USB debugging and Stay Awake.
* Unknown sources can be found at Settings > Store.
* USB debugging and Stay Awake can be found at Settings > Store > Development.
6. Make sure all drivers are installed properly. Some might install when connecting the USB.
7. Turn off your phone and unplug your USB cable from the phone (Let the USB be in your computer/laptop)
- Backup your own recovery (not required but suggested)
8. Open "Flash_tool.exe" from version "3.1224.0.sn85".
9. Click on File > Open Scatter-loading file, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146" and open "MT6573_Android_scatter.txt".
10. Click on the Read back tab (top). (If there is anything in the list, please Remove it.)
11. Click on Add and double click on the ROM_1.
12. Now type recovery.img at Filename, then browse to "C:\GooApple\MTK Rom Studio 1.1.77.146\SPFT_UPLOAD" and click Save.
13. In the popup, select
* Type: Hex
* Read Method: Read Page Only
* Start Adress: 0x980000
* Length: 0x00500000
And click Ok
This info can be found when loading the Firmware.info in MTK Rom Studio
14. Click on Read back. Now hold the "Volume -" button and insert the USB in your phone. It should say OK at the end.
Now you have a backup of your original recovery.img in case you want to restore it.
- Installing CWM Recovery (REQUIRED FOR ROOTING!!)
14. Go to the CWMR Recovery's folder, then choose if you want the Standard CWM or the Touchscreen CWM and copy the recovery.img included to "C:\GooApple\MTK Rom Studio 1.1.77.146"
* Standard CWM is controlled by Volume up and down. Touchscreen CWM is controlled by both.
15. Open "Flash_tool.exe" from version "2.1134.00".
16. Click on Scatter-loading and browse to "MT6573_Android_scatter.txt" in MTK Rom Studio and open it. (Click OK on the popup)
17. Now make sure everything is unchecked EXCEPT "RECOVERY". (Don't forget that your phone should be turned off and unplugged.)
18. Now click on download and insert your USB cable. It should say OK at the end.
Now you have CWM Recovery installed.
- Rooting the phone
19. Start your phone and connect to USB Storage Mode.
20. Copy "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip" to the ROOT of your SDcard. And turn off USB Storage (but keep your USB in)
21. Now boot your phone into recovery mode. There are 2 methods, I prefer method #2 as it's more safe and works most often. (Someone's phone kept vibrating while doing method #1)
* Method #1:
- Shut off your phone (wait untill it vibrates to make sure it's completely off).
- Hold the "Volume +" button and the "Power" button.
- You now are in recovery or your phone keeps vibrating.
* Method #2:
- With your phone on, start "cmd.exe" as administrator on your PC.
- Type "cd C:\GooApple\ADB" (without the "") and press enter.
- Type "adb reboot recovery" (without the "") and press enter again.
- Your phone shall reboot in recovery.
22. In recovery, select "install zip from sdcard", then "choose zip from sdcard" and select "Root_Superuser_3.1.3_Busybox_1.20.2-Update1-signed.zip". Select "Yes - Install ..."
* Recovery Controls (Standard CWM)
Volume + = UP
Volume - = DOWN
Power = Select
Home = Go to +++++Go Back+++++
23. Once completed, select Go Back, and select wipe data/factory reset.
24. Now select "reboot system now".
And here we go... Your GooApple V5+ is Rooted !
Thanks again yuweng for the support !
____________________
How to Increase Internal Memory - INT2EXT method (ROOT required)
"INT2EXT on MT6575 / 77 for the extreme gamers !" for GooApple V5+ thanks to yuweng !
- NOTE: THE PHONE TENDS TO BE SLOWER AS IT HAS TO LOAD FROM THE SDCARD
Based on yuweng's tutorial : http://www.mediafire.com/view/?7zjz4onhos826bk
Download and/or install and extract these:
MiniTool Partition Wizard (Home edition) - http://www.partitionwizard.com/download.html
INT2EXT-mtd.7z (Includes install-recovery.sh) - http://www.mediafire.com/?16psto1xqw4b0s0
Notepad++ (To edit install-recovery.sh) - http://notepad-plus-plus.org/download/v6.2.3.html
ES File Explorer File Manager - https://play.google.com/store/apps/...sMSwxLDEsImNvbS5lc3Ryb25ncy5hbmRyb2lkLnBvcCJd
BACKUP YOUR GOOAPPLE V5+ WITH CWMR
1. First I installed and opened MiniTool Partition Wizard and mounten my SD card (32gb & Class10) with going in USB Storage Mode.
2. In MiniTool Partition Wizard, I selected my drive and resized it from 29gb to 26gb (FAT32).
3. Then I selected the remaining 2.5-3gb and created a new partition : Primary , Ext4 , 4kb. Don't forget to click Apply at the top left.
4. Then I extracted INT2EXT-mtd.7z and installed Notepad++.
5. With Notepad++ , I opened install-recovery.sh and changed unbind to bind in lines 61, 66, 71 and 98. Then saved it.
6. Now I copied the EDITED install-recovery.sh to the root of my /sdcard/ (Location when you open your phone).
7. Having ES File Explorer File Manager (EFEFM) installed, give it Root acces via the Settings at the bottom (check everything at root settings).
8. Next, select install-recovery.sh in EFEFM and copy it to /system/etc/ and give it full read/write/execute acces.
9. After this is done reboot your phone. For me, after the first boot it just shutted off. So then I had to power it on again and I had 2.6gb internal memory.
Hooooorah ! :good:
Thanks again yuweng for the files, info, tutorials and time !
Proof
____________________
Change BOOT logo to iPhone's Apple
So this will change the boot logo of your GooApple from an Android logo to Apple logo.
The things you need:
The boot images - http://www.mediafire.com/?363hvgcmw46wl6w
ES File Explorer File Manager or Root Explorer
1. Extract the iphoneboot.zip to your /sdcard/ so you have /sdcard/system/logo/...
2. Open the file manager, browse to /sdcard/ and copy the system folder.
3. Next go to the root of your phone and change the permissions to R/W.
4. Now paste the system folder here so it overwrites the system logo files.
5. Reboot your phone and voila, now you have the iphone boot !
____________________
Tips&Info
- Make 3 backups of your phone through CWM Recovery because some might get corrupt.
- Use Titanium Backup Pro or a similar tool to remove unused/chinese system apps.
- The MTK6575 can be compared to the PowerVR processor. So the PowerVR games work on the GooApple V5+.
____________________
Custom Recovery *.img
CWM Recovery v6.0.2.7 - Standard Version (MTD partition)
CWM Recovery v6.0.2.7 - Touchscreen Version (MTD partition)
TWRP Recovery - Touchscreen (MTD partition) : Make sure when doing a backup you choose "External".
____________________
Change BUILD.PROP for more compatibility of Apps&Games
Your phone is being recognized as a Android Alps phone which a lot of apps don't even recognize.
So the best thing you can do is change your "build.prop" a little to increase the compatibility.
For example, yesterday I bought N.O.V.A. 2 which says it's not compatible (but it is).
1. Open Root Explorer or something similar.
2. Go into /system/ folder. Make sure the folder is R/W.
3. Press and hold on build.prop then select "Open in Text Editor".
4. Next, change the following.
- ro.product.model=GT-I9000
- ro.product.brand=samsung
- ro.product.name=GT-I9000
- ro.product.device=GT-I9000
- ro.product.board=GT-I9000
- ro.product.manufacturer=samsung
5. Then go back and it will ask you to save it. Save it.
6. Now reboot your phone and try again with more compatibility !
____________________
Useful Downloads
Android
- ES File Explorer File Manager - Tool to browse your folders and copy/paste/delete - Free
- Older MobileUncle Tools - This version is better for changing the recovery via a tool. (name: m44tools.apk, it also includes the 2 recovery's for this phone) - Free
- MobileUncle Tools - Special tool for MTK Android Devices - Free
- MobileUncle Flashlight - App to switch on/off the flashlight - Free
- Pimp My Rom - Awesome tool which has settings to increase for example your phone's internet speed !
- Explorer (or Root Explorer) - Tool to browse your folders and copy/paste/delete - Free or $
- Titanium Backup (or Pro) - Tool to backup/uninstall apps (also for system apps) - Free or $
Computer
- Xmedia Recode - Tool to convert videos to compatible videos for GooApple V5+ (Use iPhone 4 preset)
CLICK TO BROWSE OFFICIAL ROMS
This is the original ROM that comes with the phone : https://dl.dropbox.com/u/76038325/Gooapple_V5_Plus_ROM_A116A_V1.0_P2MB3_20121110.rar
To check which ROM version you need, dial *#2170#*.
The number didn't work for me but they said it works at the official GooApple site. I used A116_4S to update my phone.
IF YOU FOUND SOMETHING OR JUST WANT TO ASK SOMETHING PLEASE FEEL FREE TO POST BELOW
I really want to thank the following people:
yuweng - Always helping me out with troubles.
bigrammy - Giving me the tip to use an older version for doing a Download in SPFT.
The phone can be bought at Android-Sale.com​
What I wish to do with this phone and might need help for:
ROM (standard and v5+4s_a116_ios_root_12.11.16_Launcher)
- Get GPS to work on my phone. (Still don't know if it's just me or the phone.)
- Change the USB Storage Mode image to something like the iPhone by editing Framework-res.apk.
- Increase Internal memory by taking System's memory.
ROM (v5+4s_a116_ios_root_12.11.16_Launcher only)
- Remove all the chinese icons in "Google Pinyin IME" keyboard and add AZERTY for Belgium and France.
GooApple V5+ Manual
Thanks to "Q" for looking up this valuable information !
How to take a screenshot:
Tap both the "Home"-button and "Power"-button simultaneous. If you have sounds activated, you'll hear a shutter sound.
How to force restart:
Deep at the bottom of the 3.5 headphone jack there is a restart-button. Use a small tool like a bent paperclip or toothpick to reach it.
You can use this restart-button if your phone freezes and can not be restarted using the normal power-button.
THIS IS A LIFESAVER !
Recovery-menu explained:
The Recovery-menu is a boot-menu that can be used to backup, restore, clean cache or change ROMs in your GooApple phone.
This menu can be either in English or Chinese and may vary slightly depending on what type of Recovery came pre-installed on your phone.
You can install a different Recovery-menu on your phone like CMWR / TWPR
To access the Recovery-menu:
- Turn off your phone.
- Press and hold the PLUS-button and POWER-button on your phone until you arrive at the recovery menu.
NOTE: Depending on ROM and Recovery-version, you may actually need to press MINUS-button and POWER-button to access the Recovery-menu
Factory-test-menu:
This can be used to test the hardware functionality of your phone.
To access the Factory-test-menu:
-Turn off your phone.
-Press and hold the PLUS-button and POWER-button on your phone then lose it and hold it again after the vibration.
NOTE: It doesn't always work so you really need the perfect timing.
Navigating the user-interface:
This menu you can close running apps on the background so pretty usefull sometimes.
- Double-tap the "Home"-button shows running/standby apps and possibility to close apps by long-pressing icons in deployed menu.
- Double-tap the "Home"-button at the unlock-screen will show you the music player and a button to quickly acces the camera.
- Hold the "Home"-button to acces Wallpaper and Settings faster.
- Pressing the "+"-button when using the camera will take a picture.
NOTE: Double tapping must have some kind of pace in pressing these 2. If you do it too fast, ut doesn't work.. but too slow, it doesnt work either, so it has to be right.
- "Long-pressing" an icon in the menu makes the icons jiggly so you can change the position of your icons by dragging them to a desired position or on another icon to create a folder.
- "Long-pressing" the MINUS-button can bring up a menu in some applications. - UNCONFIRMED
Trouble hanging up a phone-call?
- Holding the phone vertically during a call turns off the screen (if the light-sensor has been covered).
- Holding the phone horizontally for a few seconds, will turn the screen on again and display the "End call"-button.
NOTE: Make sure you never double-tap the "Home"-button during a call. It will minimize the calling session so you will still be calling in the background. So make sure you always press the "End call"-button.
Change user interface language
If you cleared user data when installing a new ROM, the phone is likely to boot up in Chinese. Follow these steps to change it back to English:
- Press the Settings-button (you can probably identify this by its icon).
- Select the 9th option (General)
- Select the 8th option (International)
- Select the 1st option (Select language)
- Select your language.
NOTE: If you want some influence of your native language, you can install MoreLocale2 from GooglePlayStore. Some apps will be in your native language.
How to change the IMEI-number:
To change the IMEI number, you most likely will have to use MTKdroidTools from MediaFire.com.
It has an option to change the IMEI number but for this, you will need:
- the ADB drivers to be installed.
- A new IMEI number with what you want to change the original one.
- Phone connected to your computer.
How to add more Ring, SMS, Notification - sounds on your GooApple:
- Connect the phone to a computer in USB Storage Mode.
- Create the following folders on your SD-card:
- Ringtones
- Alarms
- Notifications
- Move your own sounds into the appropriate folder.
- Adjust the sounds-settings on your phone here:
- Ring-tone: Settings>Audo profiles>General>Voice call ringtone
- SMS-tone: Settings>Auido profiles>General>Notification ringtone
- Alarm-tone: Enter your Clock-app and add a new alarm and you should be presented with ringtone-options.
How to remove the backcover and change the MicroSD:
You might want to remove the backcover to change the MicroSD card or maybe even to change the cover.
To remove the cover:
- Unscrew the 2 screws at the bottom of your phone. You need a special screwdriver for this.
- Slide the back cover up once the screws are removed.
To change the MicroSD:
- Having the cover removed, you will see the SD card to the left of the battery trapped in some aluminium cover.
- Slide the aluminium cover to the left and now you can remove the SD card.
To put the cover back on:
- Put the cover back in its place, then drag it down (instead of up to remove it).
- Put the 2 screws back
Thanks mate! Very helpfull
AShacks said:
Thanks mate! Very helpfull
Click to expand...
Click to collapse
No problem !
And can anyone with a GooApple V5+ please try this to fix the GPS signal?
1. Charge your phone completely (100%)
2. Download and install Mobileuncle MTK Tools from Google Play.
3. Go to Settings > Location Services and turn off everything here. Also turn off WiFi.
4. Now turn off your phone. Then turn it back on and enable WiFi.
5. At Settings > Location Services
- Enable : Use wireless networks.
- Enable : Use GPS satellites
- Enable : GPS EPO assistance -> Go into EPO Settings and check the EPO file info if it's downloaded, if not, make sure you're connected to the internet and uncheck/recheck Auto Download.
- Enable : A-GPS
6. Open Start Mobileuncle MTK Tools and go to Information and click on Full , then Cold and go back to Satellites.
7. Go outside/window/balcony and after a while, the red dots should become green.
Source: peterssson
They say it works for MTK 657x models but it doesn't work for me. I keep getting red dots instead of green.
Drivers
Hi,
My Gooapple V5+ arrived.
I'm quite lost since no manual inside and this is my first android.
Regarding the rooting issue, I first decided install drivers. As I read, the process is connecting USB to PC and wait for Windows to ask something and then navigate to MT6575 USB VCOM drivers forder.
However, Win7 recognized V5+ as an Android device and installed some drivers, including "My HTC" (?)(!)
Now I can access SD card and maybe something else (I have no idea what) but I can't connect to internet through USB
The big quiestion now for me, in order to root the phone, is how to install drivers properly, bcos we have:
drivers preloader MT65xx
Android ADB Interface
MT6575 USB VCOM drivers
usb_driver
usb_driver_MT65xx_Android_ZTE_v821
I have a Win7 x64 laptop
About the GPS, I have just attempt fix my possition with "MAPS", but despite I downloaded some file, I can't fix possition bcos I'm indoors now.
Thanks for any comments
I'm not sure how the USB thetering works but I'll look into it.
About the drivers. I do it like this: plug it in, then choose the DRIVERS folder and let it choose automaticly.
Android device is correct, but I haven't seen the HTC one though, I'd recommend uninstalling that one.
But really , it can do a lot if you just plug it in, let it search the driver automaticly (don't select any specific folder, just DRIVERS if you really need to).
Also the VCOM driver is more for when you're about to flash your recovery through SPFT which it will install automaticly.
If you need any "personal" help on rooting it, feel free to ask, I'll support you via skype/facebook/teamviewer.
And I too am using Win7 64bit
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Thank you, is a very useful guide ! :good:
"Q" said:
It seems that Win7 installs a Google pack of USB drivers when detects Android devices.
Maybe this one I found:
softpedia.com/get/MOBILES/Google/Google-USB-Driver-Revision4.
And bcos GooApple is not in the list, Win7 chooses HTC that has 6575 chip aswell.
I will try to uninstall "My HTC" but Windows prefer this to any in the DRIVERS folder, perhaps is more up-to-date.
Any way, automatic driver download/installing maybe problematic with this phone.
Thanks a lot for support. I will need some days to become familiar with the phone before the next level
Click to expand...
Click to collapse
Ehm it shouldn't say GooApple V5+ in device manager.
For me it says Android Phone > Android ADB Interface and when I turn on USB storage, I just get Portable Devices: G:\.
So yeah, strange it uses HTC. And sorry that I cannot explain properly how to install the drivers because I just installed a few drivers , uninstalled some and installed some other and it worked.
But the most important thing is that the VCOM driver is installed. Which will automaticly install once you try the *Read Back* method. OR this might work too:
Turn off your phone. Plugin the USB cable in your computer but not in the phone (yet).
Now hold the Volume + button and then insert the USB cable into your phone. I think now, it should install the VCOM drivers automaticly.
And no problem Anhuc ! I haven't had time to test some things as I'm in a period of getting a job for the rest of my life
Drivers Problem Fixed!!
Well, for some reason my V5+ only accept VCOM driver if press "+" when plug-in USB in phone OFF, as you suggested.
If connect USB to PC with phone "ON" it ONLY accepts Android ADB Composite Interface, as you said.
So thanks everybody for suggestions and comments. I thing the first challenge overcome :good:
PS:
About the HTC driver I had first, maybe it was bcos I had MOBILE-EDIT software, wich installs many drivers, so I had to remove it from ControlPanel/Pograms/Unistall
But after it, connected phone to PC and it installed automatically "My HTC" driver again
So removed driver from DeviceManager and also removed Google Android USB Package from PC execiting "pnputil.exe -e" in command prompt, to see the OEM# of package, then removed with "pnputil.exe -d Oem#.inf"
Seems extrange but works great. (see details here: technet.microsoft.com/en-us/library/cc730875.aspx)
I have taken some screen shots of this in case someone need.
Hope may help people with persistent drivers....
"Q" said:
Drivers Problem Fixed!!
Click to expand...
Click to collapse
Good to hear that Q and thanks for sharing the information on what was causing it !
It can always help someone else out who has the same issue.
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
GPS without signal
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
"Q" said:
Yes, I downloaded averything from v5+ tutorial and carefully read and understood this excellent work.
However, manage GPS to work is my priority now.
Is there any light in the dark?
I tried and tried, downloaded EPO files, used MTK Tools and even installed an iGo My Way version compatible with Retina screen.
One hour in the field and only saw a little signal bar of one satellite (if it was a satellite) but no points (red or green) at all in MTK Tools.
Have someone seen at least a single pretty point in the grid?
Thanks for any help.
Click to expand...
Click to collapse
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
NTP_SERVER=be.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS:
# 0 - none, 1 - Error,
# 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
ACCURACY_THRES=5
INTERMEDIATE_POS=0
ENABLE_WIPER=1
SUPL_HOST=supl.google.com
SUPL_PORT=7276
REPORT_POSITION_USE_SUPL_REFLOC=1
# blank
Click to expand...
Click to collapse
bOyka8 said:
Ooh thanks for helping out.
I do get red dots yeah but they don't turn green :/
Things you could try is
Download GPS Status & Toolbox : Launch GPS Status & Toolbox. You'll see a compass and some other stats. Hit the menu button for more options.
Make sure you have an active data connection and go to "Manage A-GPS State". Then, tap the "Download" button in the menu that pops up. When it's done, exit the app.
And another thing that made me come closer was changing the gps.conf but I dont remember what tool to use. You can do it manually though. (It's located in system/etc)
For Belgium
Click to expand...
Click to collapse
Okay!
At least I have the dots in grid.
8 satellites in red but no singnal bars :/ after 30 min with all assistance enabled and filter off.
It's very strange, all my GPSs (I have 4 more devices) can get possition from cold in less than 20 min,
Some firmware issue here, I pressume.
I will contunue with this...
bOyka8 said:
Anyways, I guess you can get to the part of flashing the phone with CMWR right?
I suggest jus reading the first part of the Rooting untill installing CMW and start there as thats the basic thing you need to do as the files I uploaded already include the patched recovery.img.
To see some pictures, check this out : http://www.mediafire.com/view/?8mxvy0ey5yfdu59 page 16 thats basicly how to Download recovery.img to your phone. But always follow my tutorial or ask me to do it for you
Click to expand...
Click to collapse
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
"Q" said:
Ok, I need the V5+ rooted to get access to system/etc....
After reading e/t in tutorial, just a stupid question: " I will loose all changes after flashing, and will need to begin again with configurations?"
I think I know the answer
Click to expand...
Click to collapse
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
I managed to do a recovery.img of my last configuration.
All ok, except that phone hangs after the OK green circle on PC screen.
Non responding at all, all black.
But reset from 3.5mm jack and all ok again.
Will do another backup from factory setings, just in case...
what happens after installing CWM Recovery?
can work as normal with phone?
Thanks for 2h supporting
problem!!
bOyka8 said:
I don't think so, you can still do it without losing everything.
Just flash the recovery.img, then install the rooting zip and you're good to go !
And if you need help rooting this baby, I can do it for you in 2 hours from now
Click to expand...
Click to collapse
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
"Q" said:
Well, something bad happened.
Afetr the backup opperation tha finished OK, it has a wrong behaviour with battery icon.
Sometimes show the pugged icon and others a ray inside.
When turn off, it finish ok and then vibrates, but a few seconds later the battery icon charging fills the scren (unplugged of course) and few seconds later disappears.
Not a big problem, but after it I tried a second backup after factory settings restore and this time when plug USB on phone while pressing "-" nothing happens. PC do nothing (not installing drivers as before) and flash_tool can't finish the last part of procedure.
I even used differnt cable but nothing. USB parameters are as suggested....
Please help!
Thanks
Click to expand...
Click to collapse
Are you using the correct version of SPFT?
For read back you need the v3... (use -) for download you need v2.... (dont use -)
And yeah with this recovery, and root everything works the same !
fixed
bOyka8 said:
Are you using the correct version of SPFT?
For read back you need the v3... for download you need v2....
And yeah with this recovery, and root everything works the same !
Click to expand...
Click to collapse
Fixed!!
Nothing worked to make it responding to USB...
Cables ok, config of USB ok too....
Decided opening phone and release power from battery cables.
I have never did it before but succeed on it
Now repeated opperation and made a successful backup in factory settings
Again I had to reset from 3.5mm jack
All ok, no problems (perhaps battery icon, but not sure)
Will continue rooting later

[Q] GoClever R75 - failed flash

So basically i failed to flash + install cwm , and now tablet isn't working. Problem is that tablet is no more seen by windows as RK29 , but as unknown device and any drivers didn't help. RK29 update tool , rkbatchtool and adb doesnt detect him. Tablet couldnt be switched off nor set in service mode by physical home button, it just turn by himself on. Physical reset button works.
Also tried with (had hope it in some kind help) inserting sdcard with android img and nothing. Any ideas ? (hope there is better solution than nand programator device).
device ID
USB\DEVICE_DESCRIPTOR_FAILURE
-physical object name
\Device\USBPDO-9
-device status
code 43
also found that after usb cable plugin Rockchip goes incredibly hot.
bump
Anybody found how to set R75 into Mask Rom mode ?
nand model is : hynix h27ubg8t2btr , 4gb version

[Q] Got stuck in Bootloop

I purchased Howen Mobile Data Terminal for Taxi Dispatch.
Model - Hero-MDT-AT1
CPU - A10, ARM Cortex-A8 Core, Main Frequency 1.2GHz
Memory - DDR3, 512M
Flash - NAND Flash
OS - Android 4.0.4
Screen - 7" TFT-LCD
Resolution - 800 x 480
Touch Screen - Four-Line Resistance type touch screen
Android 4.0.4) last month. I need to change bootloader logo, splash screen and boot-animation, tried to change them. I got boot-animation changed, following procedures in web.
Then I tried to change splash screen logo (initlogo.rle in /dev/block/nandc <following procedures in website>)
Encounter a bootloop problem, so i tried to trace back to original state, but get stuck. I cant escape from recovery mode, I didn't install CWM.
The device has buttons (home, volume-up, volume-down, Ok) and no battery.
When I tried to get in recovery mode(volume-up + Ok), it shows " Formatting /Cache... ; Formatting /Data...; Rebooting" and restart. At that period, command 'adb' detect the device for 3 seconds, I can adb push 5Mb item
onto /sdcard/
I tried to make bootable sdcard with CWM, device not detect.
When I try (volume-down + Ok*5 times), pc detects the device
Hardware_id
--------------
USB\VID_1F3A&PID_EFE8&REV_02;3
USB\VID_1F3A&PID_EFE8
but I can't find the suitable driver (tried livesuite 1.0.9, not ok).
Please help me, how should I do, I would try everything

Categories

Resources